Autopayment Proposal Selection by user id who posted the open item.

Dear Gurus,
I want to select the open items by the user name who posted the document. I checked the free selection. But it shows no field USNAM by BKPF or BSEG. Any other way I can select the user name?
Thank you
Emma

Create a substitution rule in which user name from the header is substituted to any of the fields in vendor line item. (assignment, text etc). After this you can use this for APP.
Tarun

Similar Messages

  • Document is getting posted but unalble to clear the open items

    hi gurus,
    i m using the inbound idoc ACC_DOCUMENT03 to post the receipt against invoice. uptill now i can post the receipt but it shows the items are still in the open items. i need to clear the open items for the invoice. how to solve it .

    Hi,
    In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
    and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
    Hope this will resolve
    Assign points if useful
    Thanks
    Aravind
    Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

  • How to  determine the Person who Rejected the SC item in Sourcing

    Hi Experts,
    We are working in SRM 7.0 ERP 6.0 EHP 4 in a classic Scenario.
    We are creating free text SC without Supplier and on approval the Shopping carts are getting into Sourcing Queue.
    In Carry out Sourcing the Purchaser is selecting the SC item and rejecting some items.
    How can we determine the person who is rejecting the item in the Sourcing cockpit
    Thanks
    Pooja

    Hi
    Please see the below thread and answer your question
    Issue in determining the Person who Rejected the SC item in Sourcing
    Thanks
    Ashish

  • Payment run  - should not clear the open item but should post payment doc

    Hi Gurus,
    Can you please help me , on how to acheive like when payment run F110 post the payment doc it should not close the open item rather keep that open item as open item , but hsould be be paid by payment doc posted through payment run F110.
    Have any one of you had similar requirement ..? FICO gurus help me to acheiev this .. any exit /BADI ..or ideas..
    Appreciate your help in advance

    HI ,
    Thanks for your reply , but still I am not clear on that.
    reason they want to keep this open to be kept as open item , so that item will be picked up by dunning run ..
    Basically  the open invoice is being cleared by payment doc which was generated by payment run. If we look at BSEG in the open item record BSEG-AUGBL = will have the clearing doc number , and in addition to that BSEG will have created another record for the clearing doc as well .
    May be since open invoice record is being updated with clearing doc (AUGBL ) , I belive its not shown up as open item .
    Somehow this item should be kept as open item ... that is the req and also paid item payment reference should be transfered to Bill of exchange as well.
    Hope you have clear background of my req...
    Tnanks in advance ,

  • F.05 - Posting Logic - How are the open items grouped?

    Hi,
    I am trying to understand how the posting logic works. We are on ECC 6, Classic Ledger and use F.05 for the revaluation. I am trying to revalue a Open Item managed balance sheet account, that has open items since 2009. It has  a total of 480 open items, but after reval system posts only 19 entries. I am trying to understand how SAP groups these open items, what criteria is used to group open items to different documents. The totals are matching, but I am failing to understand the how SAP combined these different open items into a smaller set that were actually posted. Can anyone please enlighten me with this logic?
    Regards,
    Venkat

    Hi,
    In terms of open item valuation, open items are grouped by the Vendor/customer and the transaction currency of the open item. But if corporate group of the vendor/customer are same and group vendor/customer is checked in settings of valuation method, the grouping will be based on corporate group and transaction currency of the open item.
    For example: You have 6 open items (say invoices)
    Local currency is USD
    1. Vendor ABC (GL account 160000) - 100EUR => diff 3$
    2. Vendor ABC (GL account 160000) - 150INR => diff 2$
    3. Vendor ABC (GL account 160000) - 200AUD => diff -2$
    4. Vendor ABC (GL account 160000) - 300EUR => diff 1$
    5. Vendor XYZ (GL account 160000) - 350EUR => diff 1.5$ (corporate group - A123)
    6. Vendor TTT (GL account 161000) - 200EUR => diff 0.5$ (corporate group - A123)
    If you carry out foreign currency valuation now, Assuming that each of these 6 open items gives valuation difference.
    1 & 4 will be grouped together and 5 & 6 will be grouped together.
    Once the open items are grouped, the following logic applies into each group.
    If post per line check is checked in the settings of valuation method, then each differences will be separate line item.
    If post per line check is not checked, then all the gains will be grouped as one line item and losses will be grouped as one line item.
    Thanks,
    Sukhbold
    Edited by: Sukhbold Altanbat on Oct 25, 2011 8:08 AM

  • How to use user exit to complete the PR item valuation price?

    Hi Experts,
    I am working on a user exit about Purchase requisition and the description is as following:
    In standard SAP, the Purchase Requisition (PR) is an internal document to translate a pur-chasing requirement. Standard, at the moment of a PR, no supplier is known and therefore no purchase price is known.
    In standard SAP, the purchase price and price conditions are introduced in the Purchase Or-der (PO); these fields are not available in the PR. Instead, the PR contains an estimated valuation price per item, this is the historic purchasing price (standard price or moving aver-age price).   
    For the GFP project, the purchase price needs to be introduced in the PR. This is due to the fact that budget reservations are made for PRu2019s. Therefore, each PR needs to have a correct purchasing value. As budget forecasting also takes into account the tax (VAT), the PR value needs to be VAT inclusive.
    The goal of this development is to ensure that the user does not need to complete the PR item valuation price manually. Instead, this field should be filled with the item contract or info record price.
    The purpose of this development is to extract the correct purchasing price from the agree-ment / info record when applicable. Thus:
    u2022If the user does not assign a source to an item, do not overwrite the item valuation price
    u2022If the user assigns a source to an item based on an agreement, use the agreement number and item to extract the purchasing item price
    u2022If the user assigns a source to an item based on an info record, use the info record number and purchasing organisation to extract the purchasing item price
    The enhancement trigger is the assignment of a source of supply by selecting a certain pur-chasing agreement (contract) or a certain info record.
    can anyone help me on this? do you know how to know the time when the trigger of the source of supply by selecting a certain pur-chasing agreement (contract) or a certain info record happens? thanks in advance!
    Kind regards
    Dawson
    Edited by: Julius Bussche on Jul 25, 2009 7:06 AM
    "Hi" removed from subject title...

    Hi Debadatta,
    Welcome to SDN.
    Have you looked report program <b>RM07MAAU</b> (Report for Material Document Archiving)?
    Hope this will help.
    Regards,
    Ferry Lianto

  • Error in transaction currency while posting GL open items

    Hello,
    I have made an LSMW template to upload GL open items data; the flat files are perfectly getting converted but while uploading, I encounter error messages stating;
    Message type      Message ID           Message No             Message Text
    E                             RW                         609     [FI]:Error in document: BKPFF $ <CLNTNAME>
    E               F5                          702     [FI]:Balance in transaction currency
    Please help me resolve this issue.
    Thanks,
    Zahack

    Well Salil,
    Thanks for your reply;
    Actually; i got to manually assign -1 for the next line item for credit; for that I got to go to 5th step of LSMW; at WRBTR field; I had to run a select from tbsl table to check for bschl and shkzg fields; and then make an if; whether shkzg is 'H' - Credit type; if it is then bbseg-wrbtr = bbseg-wrbtr * -1. This resolved the issue.
    Well, this can also help developers working with the GL open items.

  • Posting FI Document via bapi_acc_dosument_post but it does not clears the open items.

    Hi,
    I am trying to post the FI document using bapi_acc_document_post.Posting is happening successfully but clearing is not happening.
    I do not want to try bdc processing.
    Please suggest any alternate for this.
    Thanks,
    Aashi.

    Please commit and wait after execution of the BAPI.
    Thanks
    Ankit

  • Posting in Open item managed accounts in Non Leading ledger

    Hello,
    I would like to know how can we post into a open item managed G/L account in the non-leading ledger only.
    If it is not possible, then what could be the reason for the same?
    Regards,
    Sameer

    As per the New GL design it is not possible to post an entry specific to non lead ledger  to a GL which is open item managed. The reason is very clear. In non lead ledgers we do not do clearing we only do adjustments entries. Clearing can only be done in a lead ledger. Ask yourself about making a payment to a vendor from non lead ledger. It is not at all sensible.
    What you need to do to handle this scenario is to create a new GL (if it is a B/S account then mark it as line item managed and in the text you need to mention that this account is specific to non Lead ledger postings. There is no way in ECC 6.0 to flag a GL for non lead ledgers only. Once you create this account you can post an entry to this using T Code FB50L. From financials standpoint you can club this new GL in the same group or number range where you have the same account with open item managed checkbox.
    SAP is working to extend the clearing functionality to non lead ledgers but I am not sure which enhancement pack will have this feature. Till that time you need to follow the solution as described above.
    Hope this helps

  • SRM Notification sent but user has not received the work item

    The notification is received by the user but the work item is not actually visible in the user's inbox.
    Please suggets what to do?

    Hi
    The user will receive the work-item in few cases only.
    1) Incase the manager has partially rejected the Document.
    2) Incase Buyer has made some changes to the Document.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • How reprint the PO once the user id who create the PO already deleted

    Hi Gurus,
    we cannot reprint the PO, the original creator of this PO the user id already deleted.
    after the changes made in the PO we cannot reprint, the error message: 'there is no data address for user______"
    can you help me and suggest possible solution to reprint the PO?
    Thanks

    Hi,
    do you use standard printing program for PO or custom? I woulf ask developer to debug code to see where exactly is this message raised. If it is in SAP code then I would try to search for related OSS notes. If it's in custom code then I would ask developer to fix the code.
    Cheers

  • Posting the opening balance of Assets in GL account through OASV

    Hi,
    When we are entering the opening balance in assets GL account through OASV , system gives error
    " Document number is 1000000000 is already assigned to company code  with document type 01"
    Asset GL account is alreay having some balances.
    Pl let us know that how can we increase the number ranges for 01 document type.
    thanks
    harish

    Hi!
    Check this links
    Re: Opening Balance
    Opening Balance
    Opening Balance
    Re: Question regarding Opening Balance

  • I can't select Photoshop CC 2014 when using the "Open with" menu in Windows 7

    I have recently installed CC 2014, and uninstalled my CC version. When I go to a jpeg, or any image file in windows explorer, I right-click and "open with" and it isn't listed on my program list to open the file with. I click on "browse programs", find the exe file in adobe-photoshop cc2014 folder and click OK, and it just goes back to the open with menu with no option for photoshop.
    Any ideas on how I can get it on that list, so I can open these files from the file location, instead of opening up photoshop and then searching for the file location within photoshop?
    Also, I don't have any problems opening up the pictures from within photoshop, just within windows explorer.

    I'm having a similar problem, but only with jpg's. I have PS CS6, CC, and CC 2014. Other image file formats function normally with regard to the "open with" list. PS CC 2014 appears on the list. But with jpg's only PS CC appears on the "open with" list and 2014 can't be added by the browsing for it.
    The curious thing is that if I have any of the three versions of Photoshop open, click on Photoshop CC in the "open with" list, the image opens in whatever version is already open on my computer. This is true of all image formats. No matter which version I pick from the "open with" list it opens in the currently running program. I use only the latest version so keeping it open all the time is an easy work around. I won't uninstall any of the earlier versions lest more file association quirks result. it would be nice to have this matter fixed.

  • F110-Enhancement: User want to reran the same proposal after delete

    Hi guys
    It would be great if ane one having answers.
    User want to rerun the same proposal  when he likes to update the exchage rate after the payment proposal made   .For this, he will delete the proposal and reran the same proposal.
    This is for only Customers and not for Vendors as F110 itself taking care of vendors.
    Here the requirment is when he reran the same proposal he checks  new proposal documents with the documents  existed in ZTABLE earlier(needs to be crated z table for entries RUN DATE,IDENTIFICATIN,ALL DOCUMENTS belongs to each proposal ). if all documents are same then no issue ..payment ran takes place and then delete those documents from ZTABLE.if not same, for those documents payment should  be blocked(
    i.e any new  documents created  first propal and reran  proposal  those new documents shold be blocked) and then delete those documents from ZTABLE too.
    I found one BADI:   FI_F110_SCHEDULE_JOB which is triggering before proposal made.
    its having one structure  F110V having only contains one vendor(lower limit of vendors) and only one customer ( lower limit of customers) so here i could not get all the vendors and all customers but i can get all open doucments from table BSID and BSIK .
    it can be used to some extent but anyway useless.
    BTE: 1860.
    this can be used but user has to click the line item of the proposal run.if suppose there are more documents , it is also useless.
    Another BTE:2040,2060
    I can use these BTEs to delete those documents stoed in ZTABLE after payment made.
    kindly suggest me if anybody have any idea on this enhancement.
    Thanks
    Babu

    Hi,
    When delete event is fired, in PFR capture the selected tab details
    tabBean.getSelectedIndex(pageContext);
    store it in session
    then
    forward it to warning/dialog page
    post the warning page results to calling page
    in the process form request of calling page capture the event
    use
    tabBean.setSelectedIndex(pageContext,value)
    value get it from session
    pageContext.getSessionValue() API
    Regards
    ivar

  • Lockbox User Exit Selection Fields and Matching Open Items in CustomerAccts

    Dear SAP Gurus,
                       I have an issue with lockbox process. The problem is selecting the customer open item for clearing. Our Client uses standard SAP USER EXIT (FEBLB001).
               Our billing document number does not equal to the financial accounting document number all the time. We store our billing document number in the Assignment field some times, and so this is the number the customer will reference when remitting payment. I have not been able to find a way to make the SAP system to use the customer's reference number (e.g. Assignment field) to clear the open item.
    I m not sure how to resolve this issue. As far as my knowledge, we have to add selection field ZUONR to USER EXIT apart from XBLNR, BELNR. Please help me with this problem by providing me some basic knowledge. I would greatly appreciate for help.
    Thanks

    Please Anybody,
    I m waiting for anybody to give their expertize.
    Thanks

Maybe you are looking for