Error in transaction currency while posting GL open items

Hello,
I have made an LSMW template to upload GL open items data; the flat files are perfectly getting converted but while uploading, I encounter error messages stating;
Message type      Message ID           Message No             Message Text
E                             RW                         609     [FI]:Error in document: BKPFF $ <CLNTNAME>
E               F5                          702     [FI]:Balance in transaction currency
Please help me resolve this issue.
Thanks,
Zahack

Well Salil,
Thanks for your reply;
Actually; i got to manually assign -1 for the next line item for credit; for that I got to go to 5th step of LSMW; at WRBTR field; I had to run a select from tbsl table to check for bschl and shkzg fields; and then make an if; whether shkzg is 'H' - Credit type; if it is then bbseg-wrbtr = bbseg-wrbtr * -1. This resolved the issue.
Well, this can also help developers working with the GL open items.

Similar Messages

  • Error 'Update Was Terminated' - While clearing an open item

    Hi,
    We are facing a problem where we receive an error - "Update Was Terminated" when we try to clear some entries for 3-4 vendors (posted in period 12 of year 2006. it happens only for those 3-4 vendors). We have identified the problem as follows:
    1) We ran program SAPF190 and found that there is a defference in the 'debit balance' and Total of line items' for these vendors. I ran program SAPF71 (in Quality server) which rectified some entries. However, some entries still remain incorrect and these entries that still remain incorrect are ones - "which have a posting date of 10 oct 2006, but the posting period picked up by the document header is period 12, instead of period 7". Now, some other documents posted for the same vendor on the same date have picked up the correct posting period i.e. 7. I am really baffled at how this actually happened and howcome the system allowed it??
    2) After running program SAPF190, there were some entries that got corrected (these entries were just not captured by the system in the balance field, and did not have the same problem as the entries mentioned above where the wrong posting period was picked by the system). When i tried to clear the line items for the vendors whose entries had been rectified, it still gve the update error. When i checked the number range status, i noticed something very odd:
    "The number range status shows a number much higher than what the system is automatically picking for the documents (e.g system picks 230 as the document number when posting, but the number range staus in FBN1 shows current number as 256). Also, once 256 is reached (i posted 26 documents for it) and we post the 257th document, the error remains and the status number now moves up 100 places to 356). At this time if i post another document it picks the number 258 instead of 356...and if i keep posting documents till 356 is reached, im sure when i post the 357th document, the status will jump to 456)
    Can someone please help me here!! I dont understand how and why this is happening!!
    Thanks!!
    Regards,
    Angad

    >
    Ravi Sankar Venna wrote:
    > Hello,
    >
    > Please let me know the ERROR name you are getting and what is the transaction code you are using to clear. (F.13 or F-44)
    >
    > Try to analyze the dump in ST22.
    >
    > Regards,
    >
    > Ravi
    Hi,
    The error is "Update was terminated" . It sends this message to my inbox!! After searching a bit i found about the two reports - SAPF190 and SAPF071. After running them i found some balance mis-match. I ran the two programs and it rectified those mis-matched entries!! However, even after that, it is giving me the same "update was terminated" error. We are using F-44 for clearing.
    This error is coming only for those entries which we had posted using a user-exit. Basiaclly these are entries for late payment which were programmed to be posted directly at the time of invoicing. I just checked the code of the exit, and these entries were (astonishingly) made directly into the BKPF and BSEG tables (infact the posting period was hard-coded to '12', which is why even when my posting date for these documents is 10.10.2006, it still enters posting period '12' in the header instead of '7'.). Therefore, there were balance mis-match when we saw the monthly balance in FK10N and compared it with the line items total for that month. However, on running report SAPF071, it corrected those entries, but the update error problem still persists!!
    The exact error:
    Update was terminated
    System ID....   QAS
    Client.......   100
    User.....   MOHGYA323233
    Transaction..   FB1K
    Update key...   4A206A2D00E5001202000000C0A80A35
    Generated....   04.06.2009, 11:24:59
    Completed....   04.06.2009, 11:24:59
    Error info...   F1 805: Clearing: Line item 001

  • Error 'Specify account number' while posting a parked document through FBV0

    Hi,
    I am getting an error 'Specify account number' while posting a parked document through transaction FBV0.
    I am not able to figure it out as to what account number it is referring to. Since the document is parked I assume the GL account used has no problem. Please help.

    Hi,
    Try to change the Account number and then save or post the data. I think Once We Parking the Document it wont allow to post the data without changing.
    Try same scenario in the development its be useful
    Regards,

  • Error while clearing the open items - Error Message GLT2152

    Dear Forum,
    While clearing the open items in the Customer Account with the Bank receipt we get the error message -
    Account Determination 01001/missing Message No. GLT2152 The following error occured for the document you entered -
    The online document splitting is active in the system.
    The account determination does not exist yet and document cannot be posted.
    Procedure - Either check the splitting rule or create the account determination key.
    Would need your help as to how to resolve this and what to check.
    Thanks!
    Regards

    HI Murli,
    Thanks for the prompt response, I have checked in OB09, this refers to the Account Determination for OI Exchange Rate Differences and the entries maintained appear to be ok. What else could be the issue?
    Regards

  • FB50L error: Postings to G/L accounts with open item management are not permitted

    Dear All
    I need your help.
    I am trying to do some adjustment to GR/IR clearing account in Non-leading ledger. Since for this account open item management is ticked, I am getting an error message 'Postings to G/L accounts with open item management are not permitted'.
    Now I have checked the forum to find some solution...but does not fit my requirement.
    I cannot create a new account. I cannot change the existing account. I tried OBA5, but the message persists.
    I also checked the notes.
    Appreciate a response on how the post to open item managed accounts in non-leading ledger.
    Regards
    Kunaal

    Hi Kunaal
    Usually, OIM accounts are not allowed for Non Leading Ledger postings... With EhP4 or 5, i guess, a new feature is added in GL Master whereby you can specify that a GL will be OIM for Leading Ledger and Not OIM for a Non Leading Ledger
    Regards
    Kavita Agarwal

  • Balance in transaction currency (Accounts Posting error)

    Dear All,
    I got the below mentioned error message while, I am trying to post a invoice to accounts. Can anyone could help me in this context,
    Thanks & Regards,
    Dilip
    Balance in transaction currency
    Message no. F5702
    Diagnosis
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '        13,395.00-' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling application.
    System response
    Your data cannot be processed in FI.
    Procedure
    The error is probably in the calling application.

    Dear Dilip Kumar
    Goto SPRO --> Logistics General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Excise Registration.   Select the respective excise registration and go into that by clicking the lens on top.
    Here check whether a tick mark is appearing in "Excise Registration is Liable to AT1".  If not, put a tick mark and then generate invoice.
    thanks
    G. Lakshmipathi

  • Balance in transaction currency while saving the invoice

    Hi sd experts,
    i am getting the following error msg while saving the invoice
    A balance has occurred in transaction currency 'INR' with the following details:
    Exchange rate '00', amount '           450.00' and currency key 'INR'.
    Thanks a lot.
    Regards,
    pulijala satish kumar

    Balance in transaction currency can happen normally at the time of billing(due to auto excise creation) or during excise invoice creation or at the time of Utilizations.
    This can happen due to many times we might be missing the data relevant of  GLs in CIN Master data & Credit-Debitor accounts for your excise amounts(for the combination with Excise transaction type)
    Please check the tables J_1ITRNACC & J_1IEXCACC.(this second table i am not sure--will be maintained in IMG>>Log-General>>>India>> account determination also you need to check the indicators like AED,SED,NCCD etc for your Excise registrations)
    As suggested--please search in google before posting.
    Phanikumar

  • Message F5702 - Balance in transaction currency when post MR8M

    Here is my case:
    When reverse invoice through MR8M, SAP prompts an error message - Balance in Transaction Currency. After the research from Google, I found that the root cause maybe come from the SAP standard program and I apply the notes 1283651, but the error still occurs even I change the exchange rate.
    Here are the related information on those documents
    PO Exchg Rate: 7.77 HKD > USD
    PO Date: 24 Dec 2010
    Inv. Exchg Rate: 7.76 HKD > USD
    Inv. Date: 24 Dec 2010
    FI period is open for 12/2010 and 01/2011
    MM current period is 01/2011 and valid for posting on previous period
    Does anyone have idea on it?
    Thanks a lot!!!
    Eric

    I had tried with this figure when execute MIRO
    Reversal Reason: 01/02
    Posting Date: Blank or 24 Dec2010(Document Date of Invoice)
    Exchg Rate on 12/2010 and 01/2011: 7.77
    Exchg Rate on PO is 7.77, MIRO is 7.76, so MIRO contains an entry on GL account for Material Price Variance
    From the OBYC, just KDM contains entry with GL Account 37301001 ( Realised EX Gain/Loss )
    And the other transactions (KDG, KDR, KDV) are without any entries
    Meanwhile, I also check the AR/AP valuation, but with document posting at Dec 2010 on account 37301001
    Thanks,
    Eric
    Edited by: bapechun on Jan 6, 2011 7:13 AM
    Edited by: bapechun on Jan 6, 2011 7:15 AM

  • Balance in Transaction currency while doing MIGO

    While doing MIGO, getting the error '' Balance in Transaction Currency'' and showing the total of Excise and Cess amounts.
    Urgent issue. Appreciate if you could respond asap
    thanks
    Sridevi

    hi
    sridevi,
    pls verify the raw material inventory account or the GR/IR clearing account, u might have checked only balances in local currency, or it could be in raw material master records, where in u might have selected the foreign currency valuation
    cheers
    bala reddy

  • Error  in document number while posting the material

    Dear experts
    while posting the stock  MB1C  for the material  the error  is  " incorrect doc number $  1 .select doc number between   800000100  and 800000199.
    how to  correct  this  error. where  to check this  number ranges  of  document.
    Thanks  &  Regards.
    Erfan.

    Hi
    The document type, which is integrated for Material related posting is appears to be configured as "External Document Number Ranges".  In the event of external number ranges, MM transaction tries to post same document number individually at MM system and propose same number in FI for Accounting Posting.  If the proposed number is not within document number ranges, then you would expect this kind of errors.
    What you need to do is:
    1.  See the document type, which is being posted and set correct number ranges as per MM transaction document type number ranges  or
    2.  change MM transaction number rages in order to FI document number rages
    Hope this helps

  • Error message type M7093-While posting to Cost center

    Hi All,
    While posting the material to cost center in MB21 201 movement i am getting the following error message :
    Fld selectn for mvmt type /  acct  (G/L accnt no) differs for Business Area
    Message No M7093
    Please help me.
    I am not able to post this document.
    Regards,
    Nagaraj S

    Hi
    Check the field status group assigned to GL account in FS00 and check its assignments in OBC4.
    Also check mvt type settings in OMJJ transaction - 201 mvt - field selelction - additional account assignment (here business area is optional.)
    You need to change either of them. Take help of FI consultant.
    Thanks

  • Getting error "Error connecting to MDEX" while trying to open micro browser

    Hi,
    I am using endeca Tools and framework 3.1.0 and MDEX 6.3.0.
    While trying to open micro browser from Workbench UI to create page template configurations,I am getting following message in popout:
    Error connecting to MDEX. The data service associated with this editor is not correctly configured.
    Please guide the if you have any clue.
    Thanks,
    Mayank Batra

    I have successfully configured RecordSpotlight editor to use a different endeca instance. What I did is modify apps\[your app name]\config\editors_config\services\dataservice.json file with updated endeca search configuration, save the file, and run apps\[your app name]\control\set_editros_config.bat to apply the change.
    To verify, you can run apps\[your app name]\control\export_site.bat command to export your site configuration, the updated data service config should show in the site xml file exported.
    Hope it helps,
    Michelle

  • Getting Error Code as -5002 while posting A/R Invoice as Draft using  C#

    In the following code we are getting an error while posting the invoice as an draft. Can any one help ?
                com.Server = ConfigurationManager.AppSettings["Server"];
                com.CompanyDB = ConfigurationManager.AppSettings["CompanyDB"];
                com.DbUserName = ConfigurationManager.AppSettings["DBUsername"];
                com.DbPassword = ConfigurationManager.AppSettings["DBPassword"];
                com.UserName = ConfigurationManager.AppSettings["Username"];
                com.Password = ConfigurationManager.AppSettings["Password"];
                com.UseTrusted = true;
              long RetCode = com.Connect();
                Documents sapDoc;
                sapDoc = (SAPbobsCOM.Documents)(com.GetBusinessObject(BoObjectTypes.oDrafts ));
                sapDoc.DocObjectCode = BoObjectTypes.oInvoices;
                sapDoc.DocDueDate = dDueDate.Value;
                sapDoc.CardCode = txtCustomerCode.Text.Trim();
                sapDoc.HandWritten = BoYesNoEnum.tNO;
                sapDoc.DocTotal = Convert.ToDouble(txtTotalbeforeDiscount.Text.Trim());
                for (int i = 0; i < dgInvoice.Rows.Count - 1; i++)
                    //sapDoc.Lines.LineNum = i;
                    sapDoc.Lines.ItemCode = dgInvoice.Rows<i>.Cells[1].Value.ToString().Trim();
                    sapDoc.Lines.Quantity = Convert.ToDouble(dgInvoice.Rows<i>.Cells[2].Value.ToString().Trim());
                    sapDoc.Lines.Expenses.ExpenseCode = 4;
                    sapDoc.Expenses.LineTotal = sapDoc.Lines.Quantity * 1500;
                    sapDoc.Lines.Add();
                    MessageBox.Show(sapDoc.Lines.LineNum.ToString ());
                long j = sapDoc.Add();
                if (j == 0)
                    MessageBox.Show("Added to SAP Business One as Draft!");
    I'm getting an error code as -5002 and its not getting stored as an draft. This was done based on SDK Example given in the help document. Can any body throw light on the same.
    Edited by: Sadanand Manda on Nov 24, 2008 11:45 AM
    Edited by: Sadanand Manda on Nov 24, 2008 11:46 AM

    SAP Note Number: 1179405
    Error -5002 when trying to copy a document with Sales BOM
    In order to create the delivery via the DI, you need to set the oDoc.Lines.BaseLine value to the LineNum value from the RDR1 table (in the above example you should enter the value 2).
    we set oDoc.Lines.BaseLine=0 before starting the lines loop. This has resolved the issue.
    This note was really helpful and it was found in another query.
    You can also refer to this. https://forums.sdn.sap.com/click.jspa?searchID=19070513&messageID=6178079
    Thanks.
    Edited by: Sadanand Manda on Nov 24, 2008 12:16 PM

  • Error 'Enter GL Account' while posting and invoice line item in MIRO

    Hello Gurus,
    I am facing a rather wierd issue.
    While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
    It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
    Any help would be great as I have no clue what to do.
    Thanks

    Hello Priyadarshini,
    could you inform the error message number and it complete long text?
    Regards,
    Mateus Grings

  • Error in Transaction EAMS11 while Simulation

    Hi All,
    I am running transaction EAMS11 for a few installations which are in status 04 (Red - Error when Processing).  I am getting the following error.
    1. Error involving device ***** register 004
    2. Units of different dimensions cannot be converted
    3. Not possible to convert unit of measurement KWH to KVR
    Register 04 is KVR installation. The functionality of EAMS11 says that for a particular period for which there are no MR Results present, EAMS11 itself estimates the MR results and bill/ simulates.
    In my case EAMS11 works if I manually enter MR results through EL28, however this is not according to functionality.
    Kindly suggest. Also, any note would also be appreciable.
    Thanks in advance,
    Regards,
    Prajakt Dhumal.

    Well Salil,
    Thanks for your reply;
    Actually; i got to manually assign -1 for the next line item for credit; for that I got to go to 5th step of LSMW; at WRBTR field; I had to run a select from tbsl table to check for bschl and shkzg fields; and then make an if; whether shkzg is 'H' - Credit type; if it is then bbseg-wrbtr = bbseg-wrbtr * -1. This resolved the issue.
    Well, this can also help developers working with the GL open items.

Maybe you are looking for