AutoVue 2D loses configuration and printer settings after 4 or 5 days

AutoVue 2D loses configuration and printer settings after 4 or 5 days, and resets defaults

I purchased a single Oracle AutoVue 2D Professional License. It is loaded locally on a windows 7 workstation with full administrative rights, our network server runs server 2008, all updates are current. We use AutoVue primarily for viewing and printing autocad files, but some other graphic programs and pdf files also.
In configure/general I add the force to black option, in font paths I add the path to our AutoCAD fonts folder, and in colors I change the background to black. In the printer dialogue box, I set page area to "limits", check "force to black" and "skip blank pages". I then modify the pen settings and save them as a named setting. That's it.
It all works very well for 4 or 5 days then everything resets to defaults, even the named pen settings are lost. It's like I have a trial version and it's only functional for a few days unless its activated, but Oracle says there is no license key for this software I tried loading it on a different workstation with the same results.
thanks for your help

Similar Messages

My iPod now loses my Klondike scores/settings after I "save and exit". How can I fix this?

After my last iTunes sync, my iPod loses my Klondike scores/settings after I "save and exit". How can I fix this?

I'd try a hard reset, you have nothing to lose. If that doesn't help and you can shut off the iPod (i.e. the white screen becomes black) you can try to recover it: http://support.apple.com/kb/HT1808
If that still does not fix the problem and it was Apple that replaced the iPod, return it to them, you have a 90 Day Warranty. If you replaced the screen yourself, I have no idea if you did something wrong in the repair or if the replacement screen was defective. That is the main risk of a self repair. I doubt whether Apple will do an out-of-warranty repair on an iPod that has been opened, but you can try.

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
Try the following: make temporary copy of the library and do the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

PI Configuration and connection settings between SAP ERP and peoplesoft

Can someone please share some docs or the link for the PI Configuration and connection settings for the connection between SAP ERP and people soft system. Thanks in advnce
Regards
krish

Hello,
The following links will be helpful in this regard:
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/f3d22f01c741bdb0e62a2f4205411c/content.htm

Converting from Word to PDF and printer settings

I have a program that writes letters automatically in Word and if we have a PDF file as an enclosure when the letter prints, it actually converts the word document as a whole to a PDF. This part works great, however, when the letter begins with Word we have the Page setup for the printer to print the first page on letterhead (tray 1) and all pages after to plain paper (tray 2). When the word document converts to pdf, it is printing everything from tray 1 which is letterhead.
Is there any way to convert a document to pdf and keep the page settings as well?
Thanks for any input!

Don't have an answer. However, you might consider creating the WORD document so that the letterhead is built in and you do not need the paper.

SLED11 SP1: CUPS printer settings after ZMD image installation

Using ZMD10 for creating an image of SLED11 SP1 with CUPS and iPrint
Client I noticed that the printer settings on the freshly installed
machine are off.
More specifically all documents are printed single sided even if duplex
printing is specified. Opening the CUPS configuration at localhost:631
and setting the printer options again fixes the issue, But then I do not
want to log in to every single machine in order to make this adjustment.
Creating an lpoptions file with lpoptions has no effect. So I'm looking
for a solution on how to make this work. Where does CUPS store the
printer configuration other than in the ppd files, lpoptions or
printers.conf? All these files are included in the ZMD image.
Gnther

Gnther,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Script to perform post server build configurations and validate settings

Hello!
I would like to create a script that can set numerous Windows server settings and validate that they are indeed set correctly, based on a predefined list of settings.
For example: A third party company deploys servers from templates. I am tasked with going through the build and verifying certain configurations and settings are set, based on my company's build request. Depending on where the server resides (physically)
it will get specific settings.
Is there a way to script making the correct changes and also display a validation report that all the settings/attributes that were changed, meet the expected value?
Settings like dns settings, netbios, pagefile size/location, Terminal Server host settings(session limits etc), local admin accounts, windows features, bginfo, drive letters, drive sizes, installed ram, number of cpu cores, date/timezone, and the list goes
on. I currently run a few batch files to make the changes, but I'm still required to check that the settings are correct. It would be nice to have all the batch files rolled into a script that makes changes and then runs a validation test against
those changes. Or at the least, make changes and display all of the current values/settings so I can validate they are the correct ones.
I have little scripting/powershell experience. I could use some assistance to get me going in the right direction.

Here's some intro information that should give you a place to start pulling threads:
http://blogs.technet.com/b/heyscriptingguy/archive/2014/03/09/weekend-scripter-intro-to-powershell-4-0-desired-state-configuration.aspx
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

Lost internet access & printer settings after switched off airport extreme

Hi,
when I switched off my airport extreme I lost internet & printer settings. All other settings are OK. What`s my problem or what do I wrong?

please go to windows section and you need to provide more specific information to your problem.

AFP loses it's share points after approximately a day

After approximately a day or so of having the AFP share points accessible (internal harddrives - NOT NAS) when attempting to reconnect to the share points they are no longer available. All I see is the users home folder (if admin account) or the administartors drop box.
Anyone else experience this? I am at a loss.

What version of iPhoto? Is OS X 10.6.8 as you state correct for your OS? How are you seeing the "file size"? what happens if you export one of these photos to the desktop - Exporting From iPhoto
LN

Yosemite and print settings

MacBook Pro 15 " mid 2012 upgraded to Yosemite.
since I moved to Yosemite printing with programs like Apple Preview and Pages does not work as before with the Mavericks.
if I open a pdf file with Preview settings are limited:
if I open the pdf file with Skim or MS Word printing works correctly with the menu and the Layout / Finish can print two-sided:
nose so I have the impression that the application should be made in Apple searches for the printer to a different folder from the one to which they support the non-Apple applications.
Who do I solve the mystery and says the solution?
sorry my English translation.
emiliano

I looked on the website and it seems that the drivers Konica Minolta bizhub C253 to Yosemite will be updated in January 2015.
But I wonder:
because the same printer works with Word and Skim but does not work with Pages and Preview of Apple?
I believe that the Apple software go to look for the drivers to a location different from non-Apple software (Words, Skim etc ...).
sorry my English translation.
emiliano

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

As soon as I open the print window,and print settings ps5 crashes?

ps 5 continually crashes when I try to set printer settings

Photoshop 5 is 16 years old Please consider using the forum guidelines
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.
Crash reports ....

Upgraded to 2.3 RC and my export and print settings are gone

please help, where are my LR2 settings?
The old LR2 program folder is empty!
Only the new LR2.3 folder is usable.
thanks
dierk

Open edit>preferences, then click the show lightroom presets folder in the Presets tab. This should be where presets are stored.
make sure store presets with catalog is unchecked (unless you are using this setting intentionally)

I keep adding notes to my iphone 5s and they disappear after a few days. However there is 2 notes that have been there since I got my phone in December. I beginning switching back to iphone. 3gs was great but 5s is my mistake...

I added a couple of notes to my iphone 5s when I got it back in December 13. Any other notes added since only last for a few days then disappear. I just opened the notes app and for a split second the note was there I added 3 days ago then it disappeared. I never had this problem with any other phones and I have had both windows and older iphones. It is getting to be a real pain as the notes are essential when I am abroad which is quite frequent. If it cannot be rectified can anybody recommend a decent 'notes' app that I can buy? maybe somthing similar to the one on the windows phones which comes as standard with them but a great app all the same.
Many thanks
Shukt Designs

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

Apple Tech Support and Printer/HDD issues after 7.1

Has anyone spoken to Apple tech support about the hard drive and printer problems after updating the firmware to 7.1? I plan on calling them later this evening and will post after that

Has anyone spoken to Apple tech support about the
hard drive and printer problems after updating the
firmware to 7.1? I plan on calling them later this
evening and will post after that
I plan on calling them tonight, as I am sure they want me to be at the same location where the equipment is located. Someone told me that tech support personnel are available in "large" numbers only before 9 PM Eastern, with an average wait of 2 minutes.

AutoVue 2D loses configuration and printer settings after 4 or 5 days

Similar Messages

Maybe you are looking for