Avanti ssh error need a server browser to move files

I need a server browser so I can edit / add some files on my firewall I tryed to use avanti ssh server browser but I get an error saying
"failed to connect to avanti server daemon not running
" so how can I get this running or how do I config it to get it to work? Or is there something better? I also tried " ssh -p xxx me_@myfirewall" but I get
bash: ssh: command not found

You need to install openssh first: http://wiki.archlinux.org/index.php/SSH
I don't know about avanti, but most arch deamons can be started by running
/etc/rc.d/<deamon> start

Similar Messages

Do I need FTP server to poll a file

Hi,
i am trying to do file to file scenario. I have technical system which is different than XI system. in this case my technical system has to be FTP server to send a file or not necessarily.
I am trying to poll file from windows machine to XI system and send back the file again to windows system.
I added my windows machine as technical system and created bunisess system.
In C, i have my file.
But, it is not polling at all. What to give source and target directory while configuring adapters.
thanks,
Srinivas

Hi,
i am trying to do file to file scenario. I have technical system which is different than XI system. in this case my technical system has to be FTP server to send a file or not necessarily.
Yes, you need FTP connection in order to access file on 3rd system( Not XI)
You need to create FTP Username / password connection to your windows system. Then you can specify this in File adapter with FTP connection details.
Also check the FTP root directory for username which you are going to use to access Windows system and specify path accordingly.
Hope this will help.
Nilesh

Getting a general error message in FCE when putting .mov file onto timeline

Putting a .mov film onto the timeline above a moving image so we see the mov file playing in a reduced size in the background of whats going on ( a window). Don't know why this is happening but any advice would be appreciated!
We are really stuck so any help would be so appreciated!
thanks.

Its converted to an mpeg4 file but i think it may be the fact it is running at 30fps as oppose to the rest of the project which is 25fps. When I try to put it on the timeline it gives me the general error and then the footage which was on below it on timeline no longer exists. Very strange.

Quicktime error -2048 when trying to play.mov files.

I have been frustrated this weekend trying to find a solution to a problem that has only recently occurred accessing some digitised VCR tapes that had been archived on an external HDD. These are files that played back fine on my Quicksilver after I had recorded them, but now give a "Movie Not Available" message in Quicktime. However when opened in VLC I get a debug message box with the following information posted below. Any clues as to what might be the problem?
I recorded the files from my VCR using an ADVC-100 DA converter over firewire into BTV Pro which created .mov files (DV-PAL). When I try to open the files in BTV Pro, I get a message box "There was an error opening the movie. No Movie found. Error code 20,-2048" Did a search for this error and -2048 appears to be a Quicktime error, so am wondering if there is a problem with my installation of Quicktime. I have got all the usual suspects in stalled, Flip4Mac, Perian, VLC. Mpeg Streamclip but can't get the file to open. The external HDD is Mac formatted but I found some info about problems with missing resource forks in older .mov files causing problems if copied to NTFS HDD's.
Any ideas as to where to look next will be appreciated.
+main debug: CPU has capabilities AltiVec FPU+
+main debug: looking for memcpy module: 2 candidates+
+main debug: using memcpy module "memcpyaltivec"+
+main debug: thread started+
+main debug: thread 26421248 (Interaction control) created at priority 0 (../../src/interface/interaction.c:382)+
+main debug: Creating an input for 'Media Library'+
+main debug: Input is a meta file: disabling unneeded options+
+main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' gives access `file' demux `xspf-open' path `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
+main debug: creating access 'file' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
+main debug: looking for access module: 3 candidates+
+access_file debug: opening file `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
+main debug: using access module "access_file"+
+main debug: TIMER module_Need() : 26.549 ms - Total 26.549 ms / 1 intvls (Avg 26.549 ms)+
+main debug: Using AStream*Stream+
+main debug: pre-buffering...+
+main debug: received first data for our buffer+
+main debug: creating demux: access='file' demux='xspf-open' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
+main debug: looking for demux module: 1 candidate+
+playlist debug: using XSPF playlist reader+
+main debug: using demux module "playlist"+
+main debug: TIMER module_Need() : 19.485 ms - Total 19.485 ms / 1 intvls (Avg 19.485 ms)+
+main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' successfully opened+
+main debug: looking for xml module: 2 candidates+
+main debug: using xml module "xml"+
+main debug: TIMER module_Need() : 99.281 ms - Total 99.281 ms / 1 intvls (Avg 99.281 ms)+
+playlist debug: parsed 0 tracks successfully+
+main debug: removing module "xml"+
+main debug: EOF reached+
+main debug: control type=1+
+main debug: removing module "playlist"+
+main debug: removing module "access_file"+
+main debug: TIMER input launching for 'Media Library' : 71.406 ms - Total 71.406 ms / 1 intvls (Avg 71.406 ms)+
+main debug: thread started+
+main debug: waiting for thread initialization+
+main debug: thread 25213440 (preparser) created at priority 0 (../../src/playlist/thread.c:79)+
+main debug: thread started+
+main debug: waiting for thread initialization+
+main debug: thread 26413056 (fetcher) created at priority 0 (../../src/playlist/thread.c:108)+
+main debug: thread started+
+main debug: waiting for thread initialization+
+main debug: rebuilding array of current - root Playlist+
+main debug: rebuild done - 0 items, index -1+
+main debug: thread 26417152 (playlist) created at priority 0 (../../src/playlist/thread.c:117)+
+main debug: looking for interface module: 1 candidate+
+main debug: using interface module "hotkeys"+
+main debug: TIMER module_Need() : 48.316 ms - Total 48.316 ms / 1 intvls (Avg 48.316 ms)+
+main debug: thread started+
+main debug: thread 25212416 (interface) created at priority 0 (../../src/interface/interface.c:168)+
+main debug: looking for interface module: 17 candidates+
+main debug: using interface module "signals"+
+main debug: TIMER module_Need() : 34.354 ms - Total 34.354 ms / 1 intvls (Avg 34.354 ms)+
+main debug: thread started+
+main debug: thread 26470400 (interface) created at priority 0 (../../src/interface/interface.c:168)+
+main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.+
+main debug: looking for interface module: 4 candidates+
+main debug: using interface module "macosx"+
+main debug: TIMER module_Need() : 511.368 ms - Total 511.368 ms / 1 intvls (Avg 511.368 ms)+
+main debug: thread started+
+main debug: thread 26482176 (interface) created at priority 0 (../../src/interface/interface.c:148)+
+main debug: no fetch required for Playlist (art currently (null))+
+main debug: adding item `testing.mov' ( /Volumes/IR My Book/BTV Videos ƒ/testing.mov )+
+main debug: rebuilding array of current - root Playlist+
+main debug: rebuild done - 1 items, index -1+
+main debug: starting new item+
+main debug: processing request item testing.mov node Playlist skip 0+
+main debug: resyncing on testing.mov+
+main debug: testing.mov is at 0+
+main debug: creating new input thread+
+main debug: Creating an input for 'testing.mov'+
+main debug: waiting for thread initialization+
+main debug: thread started+
+main debug: thread 26771456 (input) created at priority 22 (../../src/input/input.c:370)+
+main debug: `/Volumes/IR My Book/BTV Videos ƒ/testing.mov' gives access `' demux `' path `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: looking for access_demux module: 2 candidates+
+main debug: no fetch required for Playlist (art currently (null))+
+macosx debug: input has changed, refreshing interface+
+macosx debug: notification received in VLC with name VLCOSXGUIInit and object VLCEyeTVSupport+
+main debug: no fetch required for Playlist (art currently (null))+
+main debug: TIMER module_Need() : 1288.828 ms - Total 1288.828 ms / 1 intvls (Avg 1288.828 ms)+
+main debug: creating access '' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: looking for access module: 8 candidates+
+vcd debug: trying .cue file: /Volumes/IR My Book/BTV Videos ƒ/testing.cue+
+vcd debug: could not find .cue file+
+access_file debug: opening file `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: using access module "access_file"+
+main debug: TIMER module_Need() : 110.747 ms - Total 110.747 ms / 1 intvls (Avg 110.747 ms)+
+main debug: Using AStream*Stream+
+main debug: pre-buffering...+
+main debug: received first data for our buffer+
+main debug: pre-buffering done 1408981 bytes in 0s - 9031 kbytes/s+
+main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: looking for demux module: 59 candidates+
+mp4 debug: found Box: mdat size 32+
+mp4 debug: skip box: "mdat"+
+mp4 debug: found Box: mdat size 18891508192+
+mp4 debug: skip box: "mdat"+
+mp4 debug: dumping root Box "root"+
+mp4 debug: | + mdat size 32+
+mp4 debug: | + mdat size 1711639008+
+mp4 debug: file type box missing (assuming ISO Media file)+
+mp4 error: MP4 plugin discarded (no moov box)+
+avformat debug: detected format: mov,mp4,m4a,3gp,3g2,mj2+
+avformat error: avopen_inputstream failed+
+lua debug: Trying Lua scripts in /Users/irdesigns/Library/Preferences/VLC/lua/playlist+
+lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/anevia_streams.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/appletrailers.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/bbccouk.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/break.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/canalplus.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/cue.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/dailymotion.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/france2.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/googlevideo.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/joox.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/koreus.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/lelombrik.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/megavideo.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/metacafe.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube.lua+
+lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube_homepage.lua+
+lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/share/lua/playlist+
+ps error: cannot peek+
+vobsub debug: could not read vobsub IDX file+
+dummy error: unknown command `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+subtitle debug: subtitle demux discarded+
+main warning: no demux module matching "mp4" could be loaded+
+main debug: TIMER module_Need() : 1954.294 ms - Total 1954.294 ms / 1 intvls (Avg 1954.294 ms)+
+main error: no suitable demux module for `/:///Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
+main debug: finished input+
+main debug: dying input+
+main debug: removing module "access_file"+
+main debug: thread ended+
+macosx debug: input has stopped, refreshing interface+
+macosx debug: addition to non-blocking error panel received+
+main debug: dead input+
+main debug: thread 26771456 joined (../../src/playlist/engine.c:244)+
+main debug: TIMER input launching for 'testing.mov' : 3573.150 ms - Total 3573.150 ms / 1 intvls (Avg 3573.150 ms)+
+main debug: starting new item+
+main debug: changing item without a request (current 0/1)+
+main debug: nothing to play+
+main debug: no fetch required for Playlist (art currently (null))+

Well it used to work fine so I think so. When I try and run the installer you linked to I get a message saying that a later version is already installed- isn't it built into the latest QT releases? One thing I thought of- the original files I think were made on a mac so there were some resource fork files of 4K size. I deleted these as I kept trying to open them by mistake, but then after this trouble I dragged them back out the trash to the original location but it didn't fix the problem- could that have caused some sort of association problem?

FCP5: Capture ERROR: "FCP was unable to read movie file just captured"

Something I've never had trouble before has just happened: I get the following error message when I try to capture DV footage as soon as it has completed the capture: "FCP was unable to read the movie file just captured" It doesn't matter what length the file is.
I am using a Sony Z1 and have captured hundreds of hours of footage. I tried capturing HDV footage and it works fine. My sequence and capture settings all match what's on tape.
When I try in iMovie HD, it captures DV fine.
I checked software update and there's nothing for me right now. The only thing that has changed on my system is updating to OS 10.5.4 along with the Quicktime and iTunes updates. Could that be the problem? But why does iMovie work fine then?
Any ideas would be mucho appreciado

Forgot to add, if I capture that same HDV tape but downsample it to DV within the camera, it also does not save the captured file. Thanks

I need an iPad browser runs .mov and flash files

I am looking for an iPad web browser that can run .mov and flash files.

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

ITunes has encountered a problem and needs to close when adding movie files

So.. I haven't done anything recently with installing any new versions of itunes or anything of the such. Just one day whenever I tried to add .mp4 files (videos) on my ipod using Itunes, it crashes with the error message "iTunes has encountered a problem and needs to close." and it closes the application. I can add music files just fine.
anyone else having this issue? If so, can you let me know what you have done to fix this problem?
Also, I got fed up today and decided to uninstall Itunes and Quicktime and then downloaded the most recent off Apple's site and that still didn't work.
Please help....
Ipod Video 80GB Windows XP

One other thing.. all the movies that I currently have in Itunes that once worked no longer work either. It crashes when I attempt to play them as well in Itunes.

Why does iTunes not give an error message for wrong type of movie file

I just spent an hour trying to get iTunes to import a movie type which it doesn't understand. Why on earth does it just fail silently instead of giving an error message about incompatible file type ? It was my own stupid fault, but I am so used to getting quirky errors in iTunes that I overlooked the obvious and started going up blind alleys. Is there some preference somewhere that can change this way of working.

Have you tried downloading the apps on your computer and syncing?
The message means what it says. Yu do not see the "artwork" for the app.

Getting errors in LR 6 after importing MOV files

Hi,
LR 6 newbie here after using Apple's Aperture. It seems that none of my MOV files are working after importing them from Aperture.
Any suggestions what should I do? I've tried purging the cache in Preferences->File handling but no luck so far.
Really clueless why LR doesn't work.
Thanks for any light you could shine on my problem.

Hi,
Could you please have a share about what KB you moved?
From the posted message, it seems to be this VMWindow.exe is not working well.
VMWindow.exe is the executable that is used for the standard “work with the virtual machine desktop” experience. If you just start this executable by itself it will open the “Virtual Machines” folder. See: Windows
Virtual PC Executables
To have it a quick fix, please take a try to reinstall Windows Virtual PC(uninstall via View installed updates Windows Virtual PC (KB958559), restart and then download/install from
here), then mount the Windows XP VHD file,
Virtual Hard Disks (VHDs) in Windows Virtual PC.
Best regards
Michael Shao
TechNet Community Support

SQL Server Browser service group does not exists. Check for earlier failures in the setup. during sql express 2008 R2 setup

Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
Gaurav

Hi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li

SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Move files from one server to another

<cfset spath = "\\ght4\clients\abc\new\256\">
<cfset dpath ="\\ffg\clients\def\new\kij">
<cffile action = "move" source = "#spath#" destination = "#dpath#">
It generating an error Is there a way to move files from server to another in coldfusion

You talk to your network administrator(s) and ask them what permissions have been assigned to the user that the ColdFusion service|demeon is running as.
P.S. By default, on a windows machine, ColdFusion runs as a "localSystem" user, which usually has *no* permissions to other systems.

Applet within browser not releasing file resource

hi,
I have an applet for ftp images upload.
run from eclipse IDE (which uses applet viewer) the applet is ok.
if i run my applet from browser here is what happens:
i upload a file .& leave the browser opened.
i then open this same file with gimp or photo-shop & get file in use error.
if i close browser & try opening file .it works ok.
why the file isn't released when applet instance still on browser ?
is there a fix to this issue ?
thanks for helping .

thanks for prompt reply.
yes i close all streams...
the core method i use to upload files is below (client is a FTPClient object)
private synchronized void putFile(File file, String remoteFile)
               throws FileUploadException {
          String sFile = null;
          try {
               sFile = r.chomp(remoteFile, '/');
               client.put(file.getAbsolutePath(), sFile + file.getName());
               r.numBytes += file.length();
          } catch (Exception e) {
               //e.printStackTrace();
               try {
                    retry(file, sFile);
               } catch (Exception e1) {
                    throw new FileUploadException(e1.getMessage());
     }what am i doing wrong ?

Error #1009 - think it has to do with a movie file

This error keeps on coming up when im trying to complete my flash website, the error seams to linked to a movie file that is interrupting something somewhere
this is the complete error message,
TypeError: Error #1009: Cannot access a property or method of a null object reference.
          at wokringonsite_fla::MainTimeline/frame3()[wokringonsite_fla.MainTimeline::frame3:16]
          at flash.display::Sprite/constructChildren()
          at flash.display::Sprite()
          at flash.display::MovieClip()
          at flash.display::MovieClip/nextFrame()
          at wokringonsite_fla::MainTimeline/updatePreloader()[wokringonsite_fla.MainTimeline::frame1: 12]
this is the code from the begining
stop();
//Preloader
loaderInfo.addEventListener(ProgressEvent.PROGRESS, updatePreloader);
function updatePreloader(evtObj:ProgressEvent):void
          //container for the progress of the site (download)
          var percent:Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);
          preloader_txt.text = percent+"%";
          if (percent==100){
                    nextFrame();
next frame
stop();
//Animate in the home_mc from right to left, using the Tween class.
//Flash - go get code that's going to make the tween work...
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
//content_mc animation - animate in..
var homeTween:Tween = new Tween(content_mc,"x",Regular.easeOut,content_mc.x,350,1,true);
//Move the background into place
new Tween(bkgd_mc,"x",Regular.easeOut,bkgd_mc.x,0,1,true);
//handle events for buttons...
home.addEventListener(MouseEvent.CLICK, clickSection);
about.addEventListener(MouseEvent.CLICK, clickSection);
portfolio.addEventListener(MouseEvent.CLICK, clickSection);
contact.addEventListener(MouseEvent.CLICK, clickSection);
AD5.addEventListener(MouseEvent.CLICK, clickSection);
AD6.addEventListener(MouseEvent.CLICK, clickSection);
AD7.addEventListener(MouseEvent.CLICK, clickSection);
tvc.addEventListener(MouseEvent.CLICK, clickSection);
function clickSection(evtObj:MouseEvent){
          //trace shows what's happening.. in the output window
          trace ("The "+evtObj.target.name+" button was clicked!")
          //go to the section clicked on...
          gotoAndStop(evtObj.target.name);
var aboutTween:Tween = new Tween(content_mc,"x",Regular.easeOut,content_mc.x, 0,1,true);
//Move the background into place
new Tween(bkgd_mc,"x",Regular.easeOut,bkgd_mc.x,-166,1,true); ------- this basic code is used for all windows from home to tvc ,
tvc code
var tvcTween:Tween = new Tween(content_mc,"x",Regular.easeOut,content_mc.x,-2500,1,true);
//Move the background into place
new Tween(bkgd_mc,"x",Regular.easeOut,bkgd_mc.x,-1500,1,true);
tvcTween.addEventListener(TweenEvent.MOTION_FINISH,donePlaying);
function donePlaying(e:TweenEvent):void{
          trace ("done playing!");
          content_mc.tvc_mc.myvideo.play();
I have absolutely no idea and right now it seams like a maze trapped in the puzzel trapped in pac man,
any help would be fantastic
cheers

hey man this is a screen shot from frame 3, there is nothing in frame 16 which makes me wonder

Mbx_bad_handle error when using ssh -X user name @ server name

We have a Solaris 10 server that we're migrating an old Cadre Teamwork application to. We find that when users on Sun workstations use ssh -X <username>@<new server> and run Teamwork on this new server it is fine.
When cygwin users and linux users run ssh -X to get to this new platform they initially get some positive feedback but they then receive the following error message:
==> teamwork
teamwork
Copyright 1984-1996.
Cadre Technologies Inc., a wholly owned subsidiary of Cayenne Software, Inc.
All Rights Resereved.
Date: Tue Feb 24 11:06:16 EST 2009
Version: TeamWork 7.1.1
ERROR: 11:06:20 24 Feb 09 HOST usat0x49 (NODE 842c0c1a)
Exception in interactive_sim: MBX_NO_SERVER_FOR_MAILBOX
ERROR: 11:06:20 24 Feb 09 HOST usat0x49 (NODE 842c0c1a)
EXC_PANIC -- Raise: No Context
Exception = 'MBX_BAD_HANDLE'
Traceback:
Can someone help explain why this is happening and what we need to do to correct the problem?
Thanks!
M. Meadows

We have a Solaris 10 server that we're migrating an old Cadre Teamwork application to. We find that when users on Sun workstations use ssh -X <username>@<new server> and run Teamwork on this new server it is fine.
When cygwin users and linux users run ssh -X to get to this new platform they initially get some positive feedback but they then receive the following error message:
==> teamwork
teamwork
Copyright 1984-1996.
Cadre Technologies Inc., a wholly owned subsidiary of Cayenne Software, Inc.
All Rights Resereved.
Date: Tue Feb 24 11:06:16 EST 2009
Version: TeamWork 7.1.1
ERROR: 11:06:20 24 Feb 09 HOST usat0x49 (NODE 842c0c1a)
Exception in interactive_sim: MBX_NO_SERVER_FOR_MAILBOX
ERROR: 11:06:20 24 Feb 09 HOST usat0x49 (NODE 842c0c1a)
EXC_PANIC -- Raise: No Context
Exception = 'MBX_BAD_HANDLE'
Traceback:
Can someone help explain why this is happening and what we need to do to correct the problem?
Thanks!
M. Meadows

Avanti ssh error need a server browser to move files

Similar Messages

Maybe you are looking for