Information about daq card AT-M10-16E-10

Hello friendsI found in the desk from my prof. a old daq-card with this number AT-M10-16E-10. On the Website of NI i cant find information about this card. Can you give me some tips how i can find information about this card?
many thanks for the support
greets from italy

Do a search for the correct name and you should come up with a lot of references. It is the AT-MIO-16E-10. Note that it is not an M'ten' but an MI(as in input)O(as in output).

Similar Messages

Hi, I had registered my credit card a week ago on Apple.and then that day I remove all information about credit card off my apple acount.but today i learned that 2 dollars payment has been given off my credit card.but I never buy any paid apps.Each ti

Hi, I had registered my credit card a week ago on Apple.and then that day I remove all information about credit card off my apple acount.but today i learned that 2 dollars payment has been given off my credit card.but I never buy any paid apps.Each time I was looking up my Itunes on pc , but there was always a 0.00$.so I do not know what to do now.please help me.check it . what happened and where is the 2 dollars? Please .

Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck

Need for sugestion about DAQ Card for load cell

Hi.
I have a AT-MIO-16XE-50 DAQ card. But, I guess it doesn't work with load cell since it dosen't have output. So I need your regomendation about what DAQ card I should use. Also, if I need to use strain gage conditioner, recomende to me.
Thanks
Jee

I couldn't find any information about a DAQ 512, but I did find info about a DAQCard-512 and DAQCard-500. If you meant one of these boards, then you will need NI-DAQ 6.9.3. That is the latest version of NI-DAQ to support these boards. Post again if you need additional assistance.

Need information about creadit card process in ESS and transaction PR05

Hello,
Can anybody explain me the credit card clearing in ESS and information about transaction PR05...Its very urgent...No doubt...Good help will be appreciated and honoured...
Thanks,
Tushar

Dear Sarthak M,
Assume you have gone through the transaction BAPI,
where you can find all relevant BAPI's .
select the relevant text such as "sales orders" - from the right side of the screen - check "Tools" tab,where you will find "Create BAPI list", click to search for the Function moduels.

About credit card

Hi, I had registered my credit card a week ago on Apple.and then that day I remove all information about credit card off my apple acount.but today i learned that 2 dollars payment has been given off my credit card.but I never buy any paid apps.Each time I was looking up my Itunes on pc , but there was always a 0.00$.so I do not know what to do now.please help me.check it . what happened and where is the 2 dollars?

Blitzinger,
Maybe you can check here Juniper.
Click on Check the status.
ali b

Basic question about accessing card reader from browser

Hi,
I am very new to card technology. I have a very basic and general question not directly related to java cards.
I need to write a web application that allows the user to read a card with a card reader.
For that I maybe need to write an applet that has to access a native DLL and call methods
to get the card ID. I already have that DLL (written in Delphi) that reads multi-technology cards.
Then pass that ID to the application server to retrieve complete information
about the card holder and display them on the user browser.
Please could someone guide me on useful resources for that kind of development, for example
already existing developments, personal experience, design solutions ?
Thanks.
Adriano

Hi Joseph,
One thing I forgot to tell is that I work with contactless cards and readers.
Contactless cards use radio frequency. Despite this fact, the problem stays the same. I already have a Delphi DLL that reads contactless cards.
What I need is a way to retrieve card holder information from a client browser. The card contains a unique ID. My idea is to use an applet that reads that ID on the client-side and then calls a servlet on the server-side to retrieve holder information associated with that ID, i.e. first and last names, and finally displays them on the client browser.
So the card contains only the unique ID, a database on the server-side contains all other related data.
Technically the applet has to call the DLL via JNI.
Do you think that using an applet that way is a good solution, do you see simpler solutions, is there security issues ?
Thanks.

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I downloaded a free game and my credit card informed about a spending of 1 dol... What is it about? Was it not a free game?

Hi. I've just downloaded a free game (gizmonauts) and inmediatly my credit card informed about a spending of 1 dol... What is it about? Was it not a free game?

You may well get additional temporary authorization holds on your credit card. Anytime you use the iTunes or App Store and you are asked to verify your account, which happens periodically (especially if you have not used it in awhile), an authorization hold may appear.
Again, they are not actual charges - think of it as Apple's billing system simply asking the credict card issuer "if I charged a dollar to this account, would the charge be honored?". When the bank's system replies affirmative, the hold is removed and disappears from your account. But no charge is actually submitted to the bank, nor processed by the bank.

I need a user manual for a PCI-MIO-16E-1 DAQ card

I am starting research using a PCI-MIO-16E-1 DAQ card that was used by a prior student and the manual is not available. I tried to access the manual online through your websitem, but I was denied access. How can I gain access to this manual so I can start to use this DAQ in my research?

What you need is the E Series help file. Here is the link, but for some reason if you can't get there, the zip file is attached.
-Alan A.
Attachments:
370503f.zip ‏1260 KB

I do not have credit card but in review your account always ask about the card information. what should i do?

i do not have credit card but in review your account always ask about the card information. what should i do?

Call the Apple Store and ask them what you should do if you want to purchase on line without a credit cart and without purchasing a gift card which seems to me would require a credit card.

How can i chancell information about my credit card

how can i chancell information about my credit card

Easiest way is to redeem an iTunes gift card. If you don't want to do that:
Go here:
https://getsupport.apple.com/GetproductgroupList.action
ask for assistance.

HT204053 how can i chancell information about my credit card

how can i chancell information about my credit card

On an iOS device:
Settings>iTunes & App Stores
Tap on your Apple ID
Tap View Apple ID
Enter your password
Tap payment information
Tap None
On the iTunes on a computer:
Go to the iTunes Store
Click on your Account Name in upper left corner of the Store and click Account (or click sign in)
Enter your Apple ID and password
Click Edit, next to Payment Type
Click None

Noise in thermocouple measurement using PCI-6024E DAQ card

I am using a PCI-6024E DAQ card for thermocouple(TC) measurement. The
TC is installed in the mold cavity of an injection molding (IM)
machine. The leads from the TC are connected to the DAQ card using a
CB-68LP board. I made a temperature mesurment task in LabView 7.0
with the two leads from TC as differential inputs and used CJC value of
25 deg C.
The problem is that when the IM machine is OFF, I get a reasonable temp
reading with some slight noise but as soon as I turn ON the IM machine,
the temp readings go wild with a lot of variations around the mean
value. The temp values also don't go to higher values when the TC is in
contact with the molten plastic in the IM machine.
Do I need to ground something here or put a resistor in the I/O board?
BTW the IM machine is grounded and the TC give correct temp values when
connected to a hand-held temp reader.
Any help will be highly appreciated.

Hello Aftab,
Looks like you need to use bias resistors to reduce the noise. Check out the following tutorial for more information about how to use bias resistors.

What is the maximum number of samples that can be acquired with a single trigger using PCI-6036E DAQ card?

1. My PCI-6036E card has a FIFO of 1024 bytes in AI. Maximum how many samples can be acquired with single trigger for digitizing a waveform?
2. PCI-6036E DAQ card has got a AO with 10ks/s update rate? Can I generate a pulsed output with the AO of this card? I need a pulse of, say, 5 V and 1 kHz frequency.

Giri,
1.The trigger is usually for enabling the acquisition. I mean, when it is logic zero, you acquire nothing; however, when it is logic one, you start acquiring your waveform,and you can acquire continuously without having to worry about how many samples, unless you want to set your program for doing so. You can acquire continuously by implementing buffer acquisition. Finally, the FIFO that is in the board will not affect the buffer acquisition.
2.Yes, you can do that! You can generate your 5V signal with that specific frequency, and you should not have any problems, because the freq fits in the update rate.
I hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

Commutation with 6280 DAQ Card

Hello,
I want to perform parameter identification of a three phase brushless DC servo motor. Basically I want to obtain mass moment of inertia, viscous damping coefficient and coulomb friction at the bearing. To do so, I plan to apply a step voltage input to the motor terminals and collect the position information with a DAQ card. I know the inductance and resistance values of the motor windings as well as the I want to perform parameter identification of a three phase brushless DC servo motor.
Basically I want to obtain mass moment of inertia, viscous damping coefficient and coulomb friction at the bearing.
To do so, I plan to apply a step voltage input to the motor terminals and collect the position information with a DAQ card.
I know the inductance and resistance values of the motor windings as well as the torque constant of the motor.
So when I apply a step voltage input to the terminals of the motor, I would know the torque that is applied.
And since I know the torque that is applied and also collect the position data I would be able to plot torque vs. position curve and would be able to obtain the necessary parameters from this graph.
My problem is; I don't know how i can apply a step voltage input to a three phase brushless DC motor.
Is it possible to use a DAQ card (I have a PCI 6280 DAQ card) for commutation? If it's possible is there an example about commutation of brushless dc motor?
I don't want to use a motion control card to perform the commutation since I want to observe the motor dynamics only.
Regards.

Hello,
for commutation you need to synchronize the output signals to the absolute rotational position of your motor. Typically this is done by implementing a lookup table to output values according to the motor's angle of rotation. This operation requires deterministic real-time behavior, so you could use a DAQ board with LabVIEW Real-Time, but for your application an FPGA-based R-Series device is probably a much better choice.
Instead of generating analog output signals, with an R-Series device you could directly generate PWM signals with sinusoidal duty cycles to control an external FET amplifier.
Here you can find example code for such a setup.
I hope this helps.
Kind regards,
Jochen Klier
National Instruments

Information about daq card AT-M10-16E-10

Similar Messages

Maybe you are looking for