AVI's (10bit) made with Digital Rapids say 'Media Pending' and never play on PC

I am running all 3 versions of Premiere Pro on our work PC (CS6, CC, and CC2014). We use this system to edit AVI's made with
Digital Rapids Stream 3.7.47. Before, we could load any AVI and it would read 'Media Pending' for a few seconds then load right up.
Now, it sits on the yellow screen and never loads. I've tried 6 or 7 different AVI's and none worked in any of the 3 versions of Premiere. The only glimmer
of hope was one loaded on After Effects CC2014, but that's it.
So, I should also mention these are 10 bit AVI's. I HAVE been able to load 8 bit AVI's but the 10 bit are all problematic in Premiere.
Please help... Deadlines approaching...
Thanks!
Mark
[email protected]

DustinMedlam, I have the same exact problem. I started using my Iphone 4S for shooting video about 2 months ago and tranferred them to my Windows machine with Windows 7. I use the clips in Sony Vegas pro 11 and make short movies. I upgraded to ios 6 last week and every video that I shoot with my iphone 4S now is not usable in Quictime or Sony Vegas???? My old videos from before ios 6 play just fine and I can use them in Sony Vegas with no problems. The only way to play the files is with Windows media player. this does me no good as I just began making short films and now I can not use any of the video I have shot since ios 6. I also have a Samsung Galaxy S2 and I shoot video with it and use the clips in Sony Vegas with no issues!?? I can not believe this is not BLOWING up on the internet like the WIFI issue is..... What do we do? All my video gear is for my Iphone not my galaxy S2. This is very annoying. I also notice that no one from Apple response to these support forums. So why are they available?? What a JOKE!

Similar Messages

Premiere cc constantly says 'Media Pending'

Hi, if anyone could help me resolve this problem I would be so grateful as I have been tearing my hair out trying to fix it. I was editing wedding footage for a client (the first one I have ever done!) and noticed that as I added more warp stabilisation to my shots, Premiere started getting quite slow and sticky. Then it finally froze and crashed. However, uponrestarted it just says 'media pending' and will not play any of the footage. the worst thing about this is it has affected my auto save files too which do the exact same thing!
All the footage is stored on my hard drive on a 2013 Macbook Pro, 8gb ram with no other programs installed and with over 200gb of space free. I have tried clearing the cache and this did not help. Previously to this Premiere had been crashing at least once per day and twice even wiped all my footage! (Although I was able to retrieve the majority of it from my last autosave). This is currently a trial version of Premiere Pro cc. Any advice or help any of you could give would be greatly appreciated.
Thanks!
Tony

Hi,
Thanks for replying. I just did what you suggested but unfortunately no difference. The footage was shot on a canon 7d, 30fps as .mov files with a h.264 codec. With this uncompressed footage Premiere was really struggling to do anything (never mind let me edit) so I was advised by a friend to transcode the footage to an easier codec (i think it might have been Apple DVCPRO50) but still in a .mov format. This worked better for a time (with less crashes) but whenever i started adding the warp stabiliser it all fell apart.
I had a guy from Adobe controlling my computer for over an hour today trying to work out what the problem was. He was stumped and advised me to move my footage form the external drive to my hard drive - this worked for a short time before the same problem with 'media pending' occurred and i haven't been able to access the footage since.
I am starting to think i might have to start again with my footage (this will be the 3rd time a serious problem with Premiere has forced to restart my project), could i ask you guys what is the best format to transcode the footage to ensure there is as little strain as possible on Premiere while also retaining the best image quality?

Media won't load inside project, always says Media Pending

For some reason when I open a project, even though I let it load all files through the progress bar in bottom right, almost always when I edit for a while and then go into the media bins and look at a file I didn't immediatly look at it says media pending and shows the yellow box. It does this even though there is NO progress bar. However if i quite premiere pro and reopen it and go straight to the same files they are always ready/there/loaded. help?

FAQ: What information should I provide when asking a question on this forum?

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Windows media player plugin loads up, then just says "ready" and never plays the file. what do i do?

Whenever I use the internal WM plug-in, it loads up, then the status in the player reads "Ready" and never downloads/plays the file.

Hi Lindsay.
The [http://kb.mozillazine.org/Windows_Media_Player MozillaZine "Windows Media Player" KB doc] explains installation and troubleshooting in-depth including a link to test the plugin, which should help you solve this problem.
Do note - if your Windows 7 OS is a 64-bit version, make sure that the plugin actually ends up in the Mozilla Firefox plugin folder (default '''C:\Program Files (x86)\Mozilla Firefox\plugins\'''). There are reports of the plugin (or actually Firefox) ending up in the wrong folder. 64-bit Windows systems has 2 Program Folder locations - "Program Files" for 64-bit applications, and "Program Files (x86)" for 32-bit applications.
Also note that the Windows Media Player is required to use the plugin - if WMP has been uninstalled from the Windows Control Panel, the plugin will not work.
Please let us know how above works out, and if we can be of further assistance. Detailed feedback is appreciated and helps us to help you better, plus enables us to better help more users with similar problems.

My Apple TV won't let me access Netflix, but all other internet choices work fine. It keeps saying Accessing Netflix and never connects. Any suggestions?

My Apple TV won't let me access Netflix, but all other internet connections work. It keeps saying :"accessing netflix" and won't connect Any ideas as to the problem?
Thanks

are you in a country where netflix is supported ?

Problem when you undo an operation DeleteTextOperation that was made with absoluteStart in a line above and absoluteEnd in any line below, but absoluteEnd should be at the end of the line above

I posted the bug on the https://bugs.adobe.com/jira/browse/SDK-23181

Hello tmock,
Welcome to the forum. It certainly would be an odd experience to attempt a common occurrence such as a simple exchange of the headphones you received as a gift for another item, and have it almost result in authority involvement! It sounds like the sales associate might have made a mistake processing the transaction, and I can understand not wanting to leave your gift behind with the uncertainty that you would ever hear from anyone again. I truly apologize for any unpleasant experience this may have caused.
I would be happy to look into this further to see if I can help you get the PS4 you wanted as an exchange, so if you could send me the information of the store you visited, I would appreciate it very much. Once I have this information, I will follow up with you as soon as possible.
Thank you for visiting the forum to share your feedback, and I look forward to continuing to work with you.
Maria|Social Media Specialist | Best Buy® Corporate
Private Message

On version 24 tried to update to 25 says install pending and will not update.

Apparently on 11/10/13 at 1:31:34 firefox did a security update from version 24 to version 25. At that time my system may have been doing a backup to a usb drive. In checking other problems on my system that has to do with video hesitation I looked at the version of firefox. When I go to about help section is says I am on version 24. When I click the look for updates, it says a newer version is available. I click to download and it fails. No error message. When I go to the troubleshooting information page and look at the update history. It says that version 25 was installed and is pending installation. How can I get the new version installed? I have a lot saved bookmarks and am afraid to just install the new complete version. Any ideas on what i can do? Appreciate the help.
rich oros

Greetings. Firstly firefox failing to properly update, and not have and sort of resolution is nothing new. Mozilla, and Netscape has had a long history of dodgy update, poor page rendering, and being as slow (or slower) than glacier on tar- hence it's nickname 'nutscrape'
I am also experiencing several issues directly related to firefox . For me 'update 26' flatout did not work, and as far as I can tell the last few updates haven't gone well. None of
-Gmail.
-Bing,
Amazon
Google (for searches)
G+
Youtube
(that's my short list)
Work. At. All.
I can pove this is unique to firefox for at least 'update 26'- Those webpages for sure will with seamonkey.
You can also prove it by way of using something from around V22.
If you can: Us a previus version of firefox. I don't know for sure if that'll messup your set-up. Up to 20 you could have two different versions of firefox installed on the same computer without any conflicts.

Iphone 4: updated to IOS 6.2. Blank Mail screen, and stuck at 21 emails. Can't access anything. Cannot Sync with iTunes either. It cycles and never gets beyond step 2, then recycles

I have an iphone running OS6.01. After updating, March 3 was my last sync. iTunes recognizes the phone, but the progress bar sits on eithe step 1 or 2 of 7 steps. Then it starts over. The device icon on the left shows syncing taking place, as does the phone.
Have rebooted the MBpro and the phone several times. Have held down the top and home buttons until the apple appears, to no avail.
Also starting March 3rd my iPhone has been struggling; My Mail is stuck at 21, and all I get is a blank screen when I click on the app. I have now other apps that won't open at all now...and when I go into settings to click on mail, I get a blue hightlighted box that stalls and goes nowhere.
Thoughts...solutions are welcome

Apple - Fix this!!!!!!
Apple, THIS IS WHERE YOU NEED TO LOOK on iOS 6 regarding "WIFI Lockout"!!!!!!
When this happens (WIFI freezes up aka "WIFI Lockout") – you can not get on internet while using WIFI!!!!!
You could be in the middle of surfing or using any app that makes data calls based on DNS and suddenly you can go no where or do nothing!
Yea sure, you can restart the WIFI connection, but WHO wants to CONTINUALLY do that?????
Apple (or any curious iOS 6 user that wants to see my point), when this happens open up a browser before you reset, disconnect/reconnect WIFI ( I tried both safari and chrome ) and type type 74.125.227.144 (google) and then “go”. A google search page will come up and you will be able to execute a search. (of course any link you click on will not work as it is dependant on DNS resolution)
Non DNS traffic works so the issue is not the WIFI connection to the access point!
APPLE, FOCUS ON FIXING THIS DNS DATA ISSUE AND YOU WILL GET MANY PEOPLE OFF YOU BACK!!!!
I KNOW THIS IS NOT ALL OF THE PROBLEMS WITH iOS 6, BUT THIS IS A HUGE PROBLEM NOT BEING ABLE TO SURF OR GET DATA THE iOS 6 DEVICE IS REQUESTING!!!!!

Bridge CC just stopped working on my MAC. Was working perfectly for a while and I haven't done anything different that I know of. When I try to load a folder it says " building criteria" and never does load. Please help!

Please help me figure out why bridge isn't working! I'm pretty computer illiterate, so step by step guidance would be helpful. Thanks in advance!

You may get better help in Bridge General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

My music has a cloud with a redline next to it and wont play music I downloaded

I downloaded songs from itunes and they wont play they have a cloud next to them with a redline through it, I cannot seem to fix this problem

Ok strange work around but try this. Hook your phone up to the computer you sync it to. On the phone go to settings / iTunes & App store double tap your apple ID and log out. Then sync your phone. (make sure you have selected the music or apps you want to sync in iTunes on your computer). That should move all those cloud with red line songs to your phone (or other device). Now just sign back into your account on the phone.

After an update firefox keeps asking me to reboot when this is done and i go to launch it it keeps saying to reboot and never launching

Then when I reboot it then asks to reboot again and again and never launching. I have reinstalled fire fox but it keeps asking the me to rboot again.

It works.
Deleting the two files mentioned by 2mymisc above does work.
Great job

Restore Backup made with Backup and Restore W7 x64

Hi ....
Im really looking for some help here...
I had my laptop stolen and my now trying to recover a 2013 Backup Image made with a Windows tool called Backup and Restore.
The backup was made with a W7 SP1 64bit using Windows own Backup/Restore utility to create a system image on an external HDD connected by USB port.
The application saved the image into a folder called WindowsImageBackup. Inside this folders there are 2 *.VHD file
So as my laptop was Stolen, im trying to recover this old Backup and save my files again.
I would like to restore that previous Image. These are the steps I took:
1) Plugged in the HDD.
2) I went to Control Panel->Backup and Restore.
3) I selected 'Select another backup to restore files from'.
4) In the Restore Files (Advanced) dialogue, my backup isn't showing into the box, because its on my external drive, so i choose browse network location
5) I clicked 'browse network location' button, and it takes me to another restore files (advanced) dialogue that asks for network folder path. I tried to locate my external HD, without success. So i tried Search Network. As i also have a copy of my
backup on my NAS, i tried to inform the network IP path, but it didnt locate the backup either. I get the error that windows was not able to find any backup sets in that directory.
6) As the step 5 resulted in nothing, i tried the option: Recover system settings or Computer. And then Advanced recovery methods. And finally use previously system image to recover computer. And then Windows asks to reboot the computer and once rebooted
it starts on recovery mode where it cant find my backup image either.
So, how can i recover my backup?
I saw that the Backup created 2 VHD files and also tried to mount the VHD using Disk Management and attaching the VHD. The VHD mounted as drive and i could finally see my files, but most of them are corrupted. So i dont know if im doing something wrong when
attaching the VHD.
Can anyone help me please? I dont know what else to try.
Thanks a lot
Flavio.

Hi,
If you mean that you want to restore an system image in a different computer, then I have to say that it will not work.
Please see the statement in KB 249694,
we do not support restoring a system state backup from one computer to a second computer of a different make, model, or hardware configuration.
http://support.microsoft.com/kb/249694/en-us
How to restore a Windows installation or move it to different hardware
Yolanda Zhu
TechNet Community Support

How to open a edxcel file made with edxcel version before windows 1997

i have recently bought a imac and i am currently transfering my spreadsheets that i had on my old windows computor to my imac and i can not open them beacuse the where made with a edxcel version before 97 and i need the information that they contain beacuse it referse to my buissness finances

Barry Carver wrote:
i have recently bought an iMac and i am currently transfering my spreadsheets that i had on my old windows computor to my imac and i can not open them because they were made with a excel version before 97 and i need the information that they contain because it refers to my business finances
Hi,
Welcome to Apple discussions and the numbers '09 forum.
You might check dataviz.com, suppliers of MacLink Deluxe. They claim to support MS Excel 2.x, 3.0, 4.0, 5.0, 95, 97, 2000, XP 2002 files on the Windows side. On the Mac side, spreadsheet support includes Excel 2004 (.xls) and (listed as database support rather than spreadsheet) CSV files. Numbers '09 can, I think, open both those formats.
The other route is to find someone with a more recent version of Excel that can open you files and save them in a newer Excel format.
Regards,
Barry

Media file thumbnails in browser say "media offline", but files are online and available for viewing/editing. How do I get a thumbnail of the clip back?

I am moderately experienced with FCE, but cannot figure out this issue. The thumbnails in my browser say "media offline", and no longer show a thumbnail of my video clip. When I try to reconnect the media files, the reconnect dialog box only checks for "online" media. I am able to view and work with the media files in my project even though it says they are offline. This issue seems to occur after a power outage. Its more of an annoyance than anything else, but I would still like to find a solution. Any help would be greatly appreciated. Thanks.

Figured it out.

AVI's (10bit) made with Digital Rapids say 'Media Pending' and never play on PC

Similar Messages

Maybe you are looking for