Avilibality check if date is nt confimred but have to deliver

dear gurus,
i want if item is avilable nt tdy according to scheduleline date its in future but i want to deliver tdy how can i do it plz provide me the detailss settings?

Hi,
Say you have created the sales order on "08/10/2007" and system had given material availability date as "15/10/2007". Now say today on "11/10/2007" the material has come in stock.
Now say you want to deliver the material today and if you go to "VL01N" then the system will not allow you to create the delivery as the system has not been able to determine a schedule line for today's date.
Do the following:
1. Go to VA02 - select the sales order number - double click on the line item - go to schedule lines - click on the item - on top there is "icon" for "item availability" or press "ctrl+F5" - click on this - now if the item is available then the system will show todays date in the "complete delivery" section. Click on the green button and you will see the change in the schedule line of the line item. Say the order was created for "10" pc and the system had created 2 schedule lines for "08/10/2007" confirmed qty is "zero" & "15/10/2007" with confirmed qty as "10" pc. Now after running the availability check the system will change the schedule lines to "08/10/2007" with confirmed qty as "zero" & "11/10/2007" with confirmed qty as "10".
Now go and create the delivery in VL01N.
NOTE:
1. If you are using make to stock then the availability check will confirm the material directly for the sales order line item.
2. If you are using make to order then in "MB1C" you will have to assign the stock of "10" pc with special stock indicator "E" for that sales order number & line item. Now the system will show the stock in the sales order.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

Similar Messages

My iMessage for my Macbook Air is not working. It says no delivered with a red ! next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time. I have done about everythin

My iMessage for my Macbook Air is not working. I have updated everything. My system is running on OS X Yosemite Version 10.10. When I go to send a message, it says no delivered with a next to it. I have tried serval different options on trying to get it to work to include logging out of iCloud and checking my date and time and updating FlashPlayer. I have done about everything I can think of. Any help would be greatly appreciate!

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

No data in Portal Report but have data in Bex Analyzer

Hi experts,
I have problem regarding portal reports. When you view the report using the bex analyzer, there is data. But when you view the report in the portal from iview, there is no data.
Please help experts.
Thanks

Hi Emmanuel (that's weird, I am an Emmanuel too! and we both have Filo origins),
There can be heaps of reasons for this.
1) Please try to run the query in transaction RSRT by entering the query name and clicking "Java Web". See if that gives you results. If that gives your results, then the iView that was saved in the portal might need some reconfiguration. Check it out.
2) Check the logic of your user exit variables. The sequence of the I_STEP calls is a bit different if you run a query in the Portal. For example, if you don't have a mandatory variable in your query, then the olap engine will call I_STEP=1 to 3 before it shows the variable screen. This behaviour is not documented in help.sap.com. However, it does work that way.
3) Try to check the caching settings for your iView. It might be caching the result. You can change this in Content Administration in the portal.
Try the above and see if it helps. Otherwise, post another message.
Cheers.

Itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?

itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?

bradenfromwaikerie wrote:
itunes says that the version of software on my ipod touch 3rd gen is up to date, but IOS 5 is avaliable. I have checked for software updates for days but it keeps saying that 4.2.1 is the current version. Why cant i get IOS 5?
because you do not have a 3rd generation device. The OS Version says so , otherwise you would be at 4.3.5 minimum and also Itunes is also always correct in determining if you have the latest OS ( if not it fetches the newest from Apple's Servers ) . And because a 2nd generation iPod stops at 4.2.1 you can't get the newest OS, because your device is old. Buy a new iPod , they have iOS5 preinstalled.

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hello Noushin,
It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
If you're using iOS 7, quit and restart the Contacts app on your iOS device:
Press the Home button twice to see preview screens of the apps you have open.
Find the Contacts preview screen and swipe it up and out of preview to quit the application.
Tap the Home button to return to your Home screen.
Wait a minute before reopening the Contacts app.
Turn iCloud Contacts off and back on:
Tap Settings > iCloud.
Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
Wait a few minutes before turning Contacts back on.
Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Regards,
Sterling

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date

already connected to wifi, has secure connection but cannot connect to app store errrormessage is a secure connection could not be established. please check your date & time settings. please help

Can't connect to the iTunes Store
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

My iphone 4s siri is not working, it just worked for a while and stopped. I've checked the data plan and it is intact, i even switched my sim to a friends phone and his siri worked but mine refused even with a wireless network. pls help.

Troubleshooting Siri
http://support.apple.com/kb/TS4079

Check the code pls. getting attachment but some data missing

HI all,
PLs check the code. I am getting mail in the attachment is having only " 12". i am not getting 13 and 14.
where i am doing wrong. ?
TABLES:adr6.
TYPES: BEGIN OF t_test,
x(3),
y(3),
z(3),
END OF t_test.
DATA: itab TYPE STANDARD TABLE OF t_test,
wa TYPE t_test.
SELECT-OPTIONS : s_rcvr FOR adr6-smtp_addr LOWER CASE VISIBLE LENGTH 30
NO INTERVALS OBLIGATORY.
wa-x = 12.
wa-y = 13.
wa-z = 14.
APPEND wa TO itab.
*LOOP at itab INTO wa.
WRITE:/ wa-x, wa-y, wa-z.
*ENDLOOP.
PERFORM send_email.
**& Form send_email
*text
*--> p1 text
*<-- p2 text
FORM send_email .
DATA : lo_mail_docu TYPE REF TO cl_document_bcs,
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL ,
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL ,
l_oref TYPE REF TO cx_root,
l_message_body TYPE bcsy_text VALUE IS INITIAL,
l_message_line LIKE LINE OF l_message_body,
l_doc_subject TYPE so_obj_des,
l_file_subject TYPE so_obj_des,
l_mail_subject TYPE string,
l_text TYPE string.
DATA itab_bin TYPE TABLE OF solix.
CONCATENATE 'Error' ' Log ' INTO l_doc_subject SEPARATED BY space.
l_mail_subject = l_doc_subject.
CALL FUNCTION 'SCMS_TEXT_TO_BINARY'
 TABLES
 text_tab = itab
 binary_tab = itab_bin.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CONCATENATE 'Attached is the' 'log file generated '
INTO l_message_line-line SEPARATED BY space.
APPEND l_message_line TO l_message_body.
APPEND '' TO l_message_body. APPEND '' TO l_message_body.
TRY.
 lo_mail_docu = cl_document_bcs=>create_document(
 i_type = 'RAW'
 i_text = l_message_body
 i_subject = l_doc_subject ).
 lo_mail_docu->add_attachment(
 EXPORTING
 i_attachment_type = 'TXT'
 i_attachment_subject = l_file_subject
 i_att_content_hex = itab_bin ).
 lo_send_request = cl_bcs=>create_persistent( ).
 CALL METHOD lo_send_request->set_message_subject
 EXPORTING
 ip_subject = l_mail_subject.
 LOOP AT s_rcvr .
 lo_recipient = cl_cam_address_bcs=>create_internet_address( s_rcvr-low ).
 lo_send_request->add_recipient(
 EXPORTING
 i_recipient = lo_recipient
 i_express = '' ).
 ENDLOOP.
 lo_send_request->set_document( lo_mail_docu ).
 lo_send_request->set_send_immediately( 'X' ).
 lo_send_request->send( ).
 CATCH : cx_send_req_bcs INTO l_oref,
 cx_document_bcs INTO l_oref,
 cx_address_bcs INTO l_oref.
ENDTRY.
COMMIT WORK.
FREE : lo_mail_docu, lo_send_request, lo_sender, lo_recipient, l_oref.
REFRESH : l_message_body, itab_bin.
CLEAR : l_message_line, l_doc_subject, l_mail_subject, l_file_subject,
l_text.
ENDFORM. "send_email
Thanks
krupali

HI Jelena,
I think we cannot commenting the
CALL FUNCTION 'SCMS_TEXT_TO_BINARY' because we are transfering the data in binary format.
Have you got the mail with full ITAb data ?
have you tried it ?
I have tried by commenting the
CALL FUNCTION 'SCMS_TEXT_TO_BINARY' but getting syntax error.
Any other idea please ?
Thanks in advance
krupali.

Apex 4.0 - Can see view data in SQL*Plus but no data in Object Browser

Hi There,
I have just started using Apex 4.o and migrated some apps. I have an issue with a report, but see the same issue with Object browser, which is easier to describe.
I have a view:
create or replace view V_PLJ_USERDEF_CODES (
         CODE_SET_ID,
         CODE_SET_CODE,
         CODE_SET_DESC,
         CODE_ID,
         CODE_SYS_CODE,
         CODE_VALUE,
         CODE_DESC,
         DISPLAY_SEQ,
         DISPLAY_FLAG,
         LANGUAGE_CODE) as
select CS.CODE_SET_ID,
         CS.CODE_SET_CODE,
         CS.CODE_SET_DESC,
         C.CODE_ID,
         C.CODE_SYS_CODE,
         C.CODE_VALUE,
         C.CODE_DESC,
         C.DISPLAY_SEQ,
         C.DISPLAY_FLAG,
         C.LANGUAGE_CODE
    from PLJ_CODES C,
         PLJ_CODE_SETS CS
   where C.CODE_SET_ID         = CS.CODE_SET_ID
     and CS.CODE_SET_TYPE_CODE = SYS_CONTEXT('PLJUMPSTART','C_USERDEF_CODE_SET');This returns data in SQL*Plus, but no data in Object Browser OR report region based on this view.
Workspace parses in the same schema as tested in SQL*Plus.
If, in report, I swap out view, and use underlying table - no problem.
Any ideas -
thanks
P

Hi all,
Thanks for getting back so promptly.
It just seems weird to me, as tables are just fine, but not views.
In the underlying schema:
SQL> sho user
USER is "ICSREPORTING"
SQL> select count(*) from plj_codes;
COUNT(*)
       107
SQL> select count(*) from v_plj_userdef_codes;
COUNT(*)
        29And in the APEX schema
SQL> sho user
USER is "APEX_040000"
SQL> select count(*) from icsreporting.plj_codes;
select count(*) from icsreporting.plj_codes
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> select count(*) from icsreporting.v_plj_userdef_codes;
select count(*) from icsreporting.v_plj_userdef_codes
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>However, in SQL browser, I can see the data in PLJ_CODES but in V_PLJ_USERDEF_CODES, just the message "This view has no data". Indeed, it is like this for all views.
I even explicitly granted access to APEX_040000 but no good.
In fact, I would like to know more about how Apex gets access to do DML against the underlying parsing schema(s).
This is a little frustrating though. It worked just fine in lots of apps in version 2.1 to 3.2
Am I missing something
paul
p.s I knew there would be a question about the context, but I had already checked that. :)
Edited by: PJ on Nov 19, 2010 4:09 AM

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

Connection failure - Itunes tells me to check my date/time. Help?

Evening, everyone.
I'm having some trouble connecting to Itunes. I get the following error message when i try -
"Itunes could not connect to the music store. A secure network connection could not be established.
Check that your computer's date and time are correct and try again."
I duly checked the date/time and found that they were wrong, so updated them and tried again and still received the same message.
I also tried turning off my Norton and trying to connect with it disabled, with no luck. The other things currently running are DVD43, Sonic Cineplayer and MSN messenger. I can't see why any of them would be interfering, but i'm happy to be corrected.
I've had no luck finding answers on the Itunes support page. I'm not sure what other information i can give to help elucidate, so feel free to ask.
Any ideas?
Hallmark Xblade Windows XP

Has anyone figured this out yet - this is the same message I get. I have the newest version of iTunes and just started using it with music I already had. First time trying to buy music, and that's what I got!!
Please someone!!!!!!!!
Dell XPS 400 Windows XP

How can I check the date of purchase for my MacBook Pro?

I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date.

Check Box data NOT been collected consistently by Acrobat XI Pro

Hi folks
I'm having a real problem with Check Box data not being processed consistently by Acrobat XI Pro.
I've got 140 response forms back - and have processed them in one batch or smaller batches of 50 forms. I can see the various check boxes ticked in the pdf view but on some forms that data does not get exported to the csv or xls. For other forms it works fine.
I've tried various exports, even opening one returned pdf form and exporting that alone. All with the same result.
I'm at a loss to the problem.
The original form is at:
http://www.orchardrevival.org.uk/wp-content/uploads/2014/02/Orchard-Inventory-Survey-form- v2-superceded.pdf
Any pointers would be very welcome.
thanks
Crispin

Thanks for that George.
Corruption: If the file is corrupted, do you know why Acrobat doesn’t report this? There was no indication of an error in this respect.
Method: I have followed your suggestion. Opened ‘BORD0008checkboxissue.pdf’ in Acrobat ProXI. Export as .fdf. Close all files.
Open a blank form in Acrobat Pro XI. Import the fdf file.
Result; The newly filled form is still missing checkbox data. Result file at http://www.orchardrevival.org.uk/?p=798
[ I also exported as xfdf and xml and csv, and looked at these files in a text editor. Neither had the correct checkbox data exported. Therefore I think it is clear that Acrobat Pro XI is not exporting checkbox data for this file to any format]
Does that shed any more light on what might be the problem ?
thanks
Crispin
Background to document: An outline form was created on Word Mac 2008, and then a pdf generated with the Save As pdf in the Word dialogue (which I think may have been an Mac OS based generator).
Then the fillable form was created complete with all 143 fields in Acrobat Pro 8. Then distributed by email. So despite the fillable form being created in Acrobat Pro, the PDF Producer is reported as Mac OSX 10.n.n Quartz PDFContext for all forms. However some of them work, some don’t. Obviously I do not have control over how the forms are filled out there in the wild – even though I’ve asked folk to use Adobe Reader.
I’ve tried processing results with both Acrobat Pro 8 and XI with similar inconsistent results. (a further interesting issue is that the filename stated in the record is incorrect for that record)

Avilibality check if date is nt confimred but have to deliver

Similar Messages

Maybe you are looking for