Avoid Administration window after starting Admin tool

Hello guys,
Whenever I start the admin tool (double click on the BI admin tool icon), it first opens up Administration window and then after couple of seconds, it opens up the admin tool. Is there a way to avoid the window from popping up? Right now, I close it manually every time I start the admin tool.

Hi User,
I didnt see any issue with admin tool (11.1.1.7) recently did the same working fine check the log
BiClient\oraclebi\orainst\diagnostics\logs\OracleBIServerComponent\coreapplication\....NQAdmintool.log
Thanks,
Saichand

Similar Messages

Can the system automatically start up with OSX and later switch to windows after starting up?

I mean, I don't want to choose between OSX or Windows when I start up. I just want to start up with OSX. Is it possible to only start with OSX and later switch to Windows after starting up, or is there any option?

you want to override the default and reboot into Windows next time?
Use BootChamp or Option key.
But when there are Windows updates it will need to be set to boot into Windows.
Sounds like you don't want to run Windows natively.

Unable to start admin tool

Hi,
I am newbie to portal.
I have installed weblogic 6.1(sp1) & weblogic portal 4.0. I was unable to start due
to license error. I executed updatelicense.cmd. I can start portal with system/weblogic
password. I am not able to logic in to admin tool with system/weblogic. What is wrong.
Any help is appreciated.
Environment is windows2000.

André is right.
Something I find useful if you are like me and keep forgetting
what user/password and URLs to use, you might want to consider
pointing your browser to the default page for the server: http://localhost:7501
This will forward to the welcome-page of the default web appp and
the page provides links to the differents tools and samples. It also
has a reminder of the username/password combinations on the left hand side.
Michel.
"André Pönisch" <[email protected]> wrote in message news:[email protected]..
Hi,
the admin-login is after the installation "administrator" and "password".
André
[email protected]
www.AP-Home.de

After updating to 6.0.2 firefox now takes a really long time to open a window after starting the program

Was prompted to update firefox. Did so, appeared to install correctly.
Now when I open firefox it takes over a minute to open a new window.

Common problem with other complaints under "stall", "freeze", and "hang". Try clicking the refresh button every 5 seconds until the page loads (usually second, third, or fourth try) instead of waiting.
Maybe it will be fixed in FF7. Mozilla is simply not addressing the problem.

Admin Tool Not Opening In Windows 2003 x64

Hi Everybody ,
I installed OBIEE 11G on Win 2003 x64 bit OS, Everything went well but the admin tool is not starting . After a search in a forum I comes to know that Admin tool wont support for x64 bit . Can any one suggest me how to start Admin tool in Win 2003 x64 bit OS .
Thanks In Advance ,
Qujes

Hi,
Check this : Admin tool crash
Regards,
Srikanth

Open and connect in OBI 11.1.1.5 admin tool fowwoling OBE Upgrade

I installed OBI11.1.1.5 on Redhat 5.2 and the admin tool on a windows. In this two machine I have OBI 10 server and admin tool installed as well. The OBI 11 components are all up running as I can access them such as EM and represention service.
Following OBEhttp://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm?print=preview#t3 .I upgraded our 10g rpd and catalog and see the repository saved in instance_home, and verified that the default is RPD sh20110903_BI002.
Next step in the OBE, I verify Reposiotory Metadata. I launched the admin tool, opened inline. In the generated dialog box, I entered the password in defined in the update script as Repository Password, and used weblogic login in User/Password. All other fields are blank. That is all I can do in the dialog box, but the Open buttone is always grey. I think at least one available repository should be listed in the list box at the bottom, but it was empty.
Then I tried to create a new repository. In step 2 Select Data Source, I choose ODBC 3.5 and use a valid system DSN, but got Error : The connection has failed.
I tried also use Connection Type OCI 10g/11g. IN the Data Source Name I used a valid netservice name defined in a Oracle client's Oracle_HOME. But still got Error : The connection has failed.
Questions
1) How can make the Open button active in the Open inline RPD dialog box?
2) Why the valid System DSN failed to connect in 11g admin tool. It is OK in 10g admin tool and ODBC configure
3) How to make Admin Too; sees the tnsnames definition. Should I copy the tnsnames.ora file to somewhere under Admin Tool installation directory?
Many thanks.

Thanks. The post appares make sense. I opened my user.sh file and has 2 questions:
1) There are 32bit section and 64 bit section, and it states that 32 bit server must work with 32 bit client, so is for 64 bit. In my case, the clients are most likely 32 bit windows (browsers and admin tool), but the server is installed on Redhat 64 bit. Is this a problem? How do I know if my OBIEE iis running 64 or 32 bit?
2) All entries in the user.sh file are commented out. Then what file is used to in the current OBI11, it is started automatically after the installation.

What's up with the Server Admin Tools update 10.3.5?

I keep getting the Apple update window with Server Admin Tools Update 10.3.5 checked off in its checkbox.
When I run the installation, it goes throught the status bar, etc, and then comes back up as needing installation.
The tools I run show 10.3 (v106) in the about window.
What's up?
thanx

Cliff, I am not sure why you are getting this update, but if you are not using Apples' Server and you are not that Servers System Administrator, Uncheck it and ignore it, you do not need it.
If by chance somewhere along the line you downloaded software that was not through the Software Update feature on your computer, you might have mistakenly downloaded some software you did not need.
Don

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

Hi Friends,
After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

WINDOWS 8.1 - System Tools no longer displaying User and Group Settings after adding a new LOCAL user.

I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!

Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

OBIEE 11g BI Admin tool not working on Windows 7 64bit - Any alternative???

Hi Experts,
I installed OBIEE 11G on Win 7 64 bit after a long struggle it went well but the admin tool is not starting..........After a search in the forum i came to know that 64 bit os can run obiee client tools. is there any work around for this? I don't want to move to 32 bit os again after taking this much struggle in installation.............can any one suggest me an alternative to work with admin tool. Using VMware 32 bit windows is an option but I don't want to go with it.
Bellow is the screen shot of the error.
http://img42.imageshack.us/img42/9389/biadmintoolerror.png
Thanks in advance,
DK
Edited by: user12296343 on Sep 19, 2010 6:28 PM

"There is currently no standalone, Windows 64‐bit Oracle Business Intelligence Client Tools installer, however the Windows 32‐bit Oracle BI client tools are compatible with 64‐bit Windows platforms per the certification document."
Source: Oracle Business Intelligence Developer Client Tools Installer (11.1.1.3.0)
http://download.oracle.com/otn/nt/bi/111130/biee_11.1.1.3_client_install_README_13_JAN_2011.pdf
The Certification Document: System Requirements and Supported Platforms for Oracle Business Intelligence Suite Enterprise Edition 11gR1
http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/bi-11gr1certmatrix-166168.xls
Tab: Current System Certificatin
Row: 46

Unable to Open the OBIEE Admin Tool (RPD) 10.1.3.4.2 after Installation

Hi,
I have installed obiee 10g (10.1.3.4.2) in windows server 2008. After installing, when I tried to open the Admintool it is giving me the below error.
The application has failed to start because its side by side configuration is incorrect. Please see the application event log or use the command-line sxtrace.exe tool for more details
Restarting the machine also does not work. Presentation Services were not started. When tried to start the services, it is throwing error like asking to check the system log. Is this stopping Admin tool to open..?
What could be the wrong with presentation services. I havent changed anything. I have reinstalled and restarted the machine, still same problem
Please help...
Thanks in advance

HI,
I see there are totally 3 programs listed with the naming convention --
"'MS VC++ 2005 Redistributable(x64)"
"'MS VC++ 2008 Redistributable(x64) x86 9.0.30729.4148"
"'MS VC++ 2008 Redistributable(x86) x86 9.0.30729.4148"
I am not sure which one to uninstall and reinstall out of these listed programs.
Is this causing the issue to display error while opening the Admin tool ?
Please help with your inputs
Thanks

OBIEE Admin Tool (11g) takes very long to start up

I am running on Windows 8.1, on a new, fairly powerful desktop machine, and launching the BI Admin Tool takes much longer than (I feel) it should. I haven't timed it but it's in the ballpark of 15-30 minutes. I double-click the shortcut and immediately I see a black console window with the title "BI Administration", but it takes such a long period of time to eventually open a GUI window. I can observe via Task Manager that the CPU appears to be utilized constantly during this startup time. Could I have something configured incorrectly? Any advice on solving this problem would be much appreciated.

Hi,
If you look at the certification matrix for OBIEE you will see the Admin Tool is currently not officially supported on Windows 8.1, for now it's only up to Windows 7 (and starting from Windows XP if not wrong).
Making it work on Windows 8.1 is a workaround (I remind I read it require the 32bit version even on a 64bit OS) so you can't complain if it's taking long or not working at all.
For a perfectly working Admin Tool stay on supported environment => use a virtual machine.

Starting visual admin tool

HI
I have recently installed SAP ENTERPRISE PORTAL
Now,I need to do some changes in the visual admin tool
I browsed to following loaction in my personal computer where I have installed SAP EP
c:\usr\sap\CE1\J00\j2ee\JSPM
There I See the file go.bat Once I click on that I see blank command prompt window being get displayed.
What are the settings I need to perform inorder to open the VISUAL ADMIN TOOL
Thanks in advance

Hi Rev,
1> Your Visual admin tool is located in folder
"C:\usr\sap\CE1\JC00\j2ee\admin".
JSPM is another tool used for upgrade or appling *.SDA or *.SCA files.
2> There is also web based tool called NetWeaverAdministrator located under alias http://<hostname>:<port no.>/nwa .
3> Also set the path for JAVA_HOME in environment variable.
4> If the locked account is the only administrators account, follow the instructions in note 669848.
5> If you no longer connect to the Visual admin it is better change the password of the user j2ee_admin as mentioned bellow
You have to change the J2EE Engine administrator password in the secure store as follows:
a. Start the Config Tool by executing the /usr/sap/<SID>/<Instance name>/j2ee/configtool/configtool script file.
b. Select secure store.
c. Select the admin/password/<SID> entry.
d. Enter the J2EE Engine administrator user new password in the Value field and choose Add.
e. Choose File -> Apply to save the data.
f. Restart the J2EE Engine
Regards,
Manomeet
Award points if helpful **

I can't start listener in the Control Painel/Admin Tools/ Services

Windows XP - Home Edition (I know it´s not the better but came with my laptop)
I installed the Oracle 10g and I don't know why I have 3 listener as services. Its services showed me different messages when I tried start it:
1. OracleOraDb10g_home1TNSListener: Could not start the 2. OracleOraDb10g_home1TNSListener service on Local Computer
2. OracleOraDb10g_home1TNSListenerORCL: The OracleOraDb10g_home1TNSListenerORCL service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
3. OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER: The OracleOraDb10g_home1TNSListenerSID_LIST_LISTENER service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the Performace Logs and Alerts service
====PATH======
Path=C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\oracle 8i\bin;C:\oracle\
product\10.1.0\Db_3\jdk\jre\bin;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classi
c;C:\oracle\product\10.1.0\Db_3\jdk\jre\bin\classic;C:\oracle\product\10.1.0\Db_
3\jlib;C:\oracle\product\10.1.0\Db_3\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C
:\oracle\product\10.1.0\Db_3\jre\1.4.2\bin\client;C:\oracle\product\10.1.0\Db_3\
jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\ATI Technologies\ATI Control Panel;%java_home%\bin;C:\Program Files\Commo
n Files\Ulead Systems\MPEG;C:\WINDOWS\system32\gs\gs8.13\bin
====REGISTRY======
TNS_ADMIN I set as Binary Data in the HKEY_CURRENT_USER\Environment with the path C:\oracle\product\10.1.0\Db_3\NETWORK\ADMIN
====LISTENER.ORA======
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.1.0\Db_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
====TNSNAMES.ORA========
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.17)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====SQL.ORA========
NAMES.DEFAULT_DOMAIN = 192.168.0.17
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
=======OS CONFIGURATION================
C:\>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Production on 23-MAR-2006 08:23
:44
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.17)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Ethernet adapter Wireless Network Connection 2:
Connection-specific DNS Suffix . : myhome.westell.com
IP Address. . . . . . . . . . . . : 192.168.0.17
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
C:\>
Please, if somebody knows this problem I need a very urgent help. Thank you very much.

Thanks ALL, I GOT IT, but I used other solution.
Since I installed and uninstalled the Oracle several times, it keeps also many different Services for the listener. I don't know why, it didn't create a Service for my actual instalation with its path. In other words, all the services remained in the services.msc panel, had the path that was already removed from the Windows folder.
Then what I did, was that I picked one service, took its name (OracleOraDb10g_home1TNSListener), went to regedit to [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\OracleOraDb10g_home1TNSListener] and simply changed the image path that was setted for the one that was removed (C:\oracle\product\10.1.0\Db_2\BIN\TNSLSNR ) for mine that is installed right now
(C:\oracle\product\10.1.0\Db_1\BIN\TNSLSNR). Nothing more and finally works.
I have tried something in the services.msc panel before, as you can see in this forum at the thread "I can't start listener in the Control Painel/Admin Tools/ Services", but I never got
success.
Appreciate your time!!

Avoid Administration window after starting Admin tool

Similar Messages

Maybe you are looking for