Avoid creation of multiple entry sheets

Dear all,
In our process we create service entry sheets for service process. In SAP once if service entry sheet is created and the p.o qty is exhausted, system still allows me to create dummy document (service entry sheet) which are available as error documents in the system against the p.o - these are accidently created by the users.
Is there any provision to prevent users from creating the SES once the p.o qty is fully exhausted. - i.e., system should throw error message and prevent user from creating the SES.
Can I know why this is kept as standard functionality in SAP - What is the use of the parked document which is not processable at any point of time?
Regards,
M.M

Hi Magesh,
I understand your problem as I have gone through the same. Unfortunately this is standard functionality and you will have to investigate if a user-exit will resolve the issue.
I did some work on this but stopped as the business agreed to live with it. Basically what you can try to do is disable "save" if it hits specific error messages (quantity exceeded or limit exceeded).
Hope this helps !

Similar Messages

  • Prevent auto creation of service entry sheet

    Dear friends,
    I am using maint plan for creating service entry sheets automatically. I am using framework order where I give the validity period. Now when I try to generate service entry sheets through the plans after the end of validity period given in framework order,the system is allowing creation of service entry sheets. Is it possible to prevent a maint plan triggering a service entry sheet if the call date for the service entry sheet to be generated falls outside the validity period given in framework order.
    best regds
    Arun

    Arun,
    This doesn't suprise me...
    I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
    PeteA
    [www.pjas.com]

  • Dump during creation of service entry sheet (ML81N)

    Dump during creation of service entry sheet (ML81N)
    Hi,
    ML81N>Select PO>Enter>goto entry sheet create (empty page)>service entry sheet displayed with internal no. assigned >click tab "service selection">Input PO No.--> enter (here we get Dump ABAP RUNTIME ERROR "TABLE_INVALID_INDEX").
    This is happening only for some POs. What can be the problem?. Is this has something to do with SAP database ???
    - rahul

    Hi,
    it could have the cause that the note 1113220 was missing from your system or that data are inconsistent in your PO.
    If you implemented 1113220 and you still get the dump, please check in transaction ST22 the run time error long text to the dump:
    Parts:
    - How to correct the error?
    - Information on where terminated
    - Source Code Extract -> if you set a breakpoint before the line where the error occured, you could debug the process.
    - Active Calls/Events: if you have an own program displayed here, please check first your program wether it has caused the issue.
    If these do not help to find out the problem cause, please open a SAP ticket and include all of the relevant information regarding the dump.
    Regards,
    Edit

  • Restrict creation of Service Entry Sheet if the Date is Prior to PO Date

    Hi,
       I need to restrict from posting a Service Entry Sheet whose Document date and Posting Date are Prior to the Document date of a Puchase Order...Can any one please suggest...
    Regards,
    Sabita

    Hi,
    Better to go release streatgy in SES Release. Give the right of revoke to some other as per business.
    also
    make the error in
    Application Area SE , system msg 155    Not possible to cancel release with code & as error
    Restrict the user with release Code and release Grp in M_SRV
    Regards,
    Pardeep Malik

  • Creation of multiple Fact Sheets

    Hi,
    I would like to create multiple customer fact sheets from different business partners in one process. The user doesn't want to open every single fact sheet.
    The origin of the business partners could be a BI-query, a target group or a Z-table.
    Does anybody have some ideas? Are there some function modules to fill the fact sheets? Is there a possibility with a function module and smart forms?
    Regards
    Jochen

    Hi Magesh,
    I understand your problem as I have gone through the same. Unfortunately this is standard functionality and you will have to investigate if a user-exit will resolve the issue.
    I did some work on this but stopped as the business agreed to live with it. Basically what you can try to do is disable "save" if it hits specific error messages (quantity exceeded or limit exceeded).
    Hope this helps !

  • Service entry sheet creation thru bapi for multiple line items

    HI All,
    WE are using BAPI_ENTRYSHEET_CREATE bapi for the creation of service entry sheet against service PO.
    We are able to create the service entry sheet successfully with single sevice line item using this bapi,but when we are going for multiple service line items in item services tab in aPO, we are able to create the service entry sheet with only one service line item although there are 4 service line items in the item service tab in the po.
    We know that this bapi cannot support more than one po line item as it has provision for only one line item at the header leavel in the bapi
    will be rewarded for the best solution.
    Regards,
    velu

    Hi,
    Do you know the note 420334?. There you have very useful information.
    Best Regards,
    Arminda Jack

  • Error during creation of entry sheet via BAPI

    Hi all,
    I have a problem with that bapi and that user exit. I can create a entry sheet with the bapi BAPI_ENTRYSHEET_CREATE and get it accepted using the flag BAPIESSRC-ACCEPTANCE of the header.
    But if i use the enhancement SRVEDIT in order to do a custom validation i get the following error during the creation of the entry sheet: "E SE 214 Error during update".
    Even if i don't do anything in the user exit (only activate it) i still get the message "Error during update". Anybody knows if there is a problem with that user exit? should i do something specific to use that user exit (it doesn't exist any documentation for the user)
    Anybody has solved the issue? Anyone knows another user exit to use in the moment of save the changes of the entry sheet?
    Many thanks in advance
    Aaron

    Hi John,
    Some of the structures you have to fill for the IDOC belongs to a  referencing ...X structure. For example structure BAPI1022_FEGLG002 and BAPI1022_FEGLG002X.                                                                               
    When you fill the capitalization dat (BAPI1022_FEGLG002-CAP_DATE = '19981231') it's necessary to fill the corresponding field (BAPI1022_FEGLG002X-CAP_DATE = 'X') to  specify that the content of the field should be transferred to the fixed asset. Otherwise it'll be not transferred and you'll get an error message instead.                                                 
    Regards Bernhard

  • Multiple release of Service Entry sheet in ML85 with a release Strategy

    Hello Techies,
    We have requirement where in we need to each release service entry sheet created in each month.
    We have created a release strategy and now using ML85 for releasing SES instead of ML81N.
    Is there any process so that all the SES are released at once(Mass release) .
    Thanks
    Jayashree

    Hi Dear,
    you select the SES as per your Release code and Code Grp, henceofrth the no of service entry sheets will be  display you can choose the multiple Entry sheets and select the green flag w/o coming to the same T-Code again and again.
    Hope it will help you.
    Regards,
    Yawar Khan

  • Service no in service entry sheet

    Hi all,
    we are creating a unplanned service po and creating the service entry sheet against it .We have a requirement  that after the creation of service entry sheet with the service line items with description alone ,can we able to chnage the service entry sheet to  the service no in these same line items before the approval process. We are not able to incorporate these changes in the same service line item.
    we were able to add it in the different service line item.
    Regards,
    velu

    Hi,
    Service entry sheet number we cannot able to change because using T-code ML81N and give PO no and doing service process, first the service entry sheet number generated and then we have given actual service qty.
    So, we are not able to change service entry sheet no.
    Better, deleted service entry sheet and make new service entry sheet for the particular PO.
    Hope, it is clear for you.
    Regards,
    K.Rajendran.

  • Restirct Priting of Service Entry Sheet in ML85

    Hi All,
    I have a requirement where in I need to restrict the Print of Service  Entery Sheet Through ML85 once the User releases the Order and saves it.
    Usually, when the User selects the Order Number, releases and Saves it, the release indicator becomes 'B' and a Print request will be generated automatically.  We need to stop this printing when the Release Indicator is B.
    While debugging, I have found out that this Print Request is coming from the Commit Work statement. There is no separate function module which triggers the Printing.
    If anyone had come across this, kindly suggest me how to proceed. Thanks in advance.
    Regards,
    Adapala M.

    Hi Dear,
    you select the SES as per your Release code and Code Grp, henceofrth the no of service entry sheets will be  display you can choose the multiple Entry sheets and select the green flag w/o coming to the same T-Code again and again.
    Hope it will help you.
    Regards,
    Yawar Khan

  • Is a BAPIBadi available for uploading data to create Service Entry Sheet?

    Dear MM Gurus,
    Users are currently entering Service PO and creating Service Entry sheet for the Subcontractor consultants  (using Transaction code - ML81N) by referring to the Service PO.
    Due to the high amount of data, the users do not want to create Service Entry sheet using ML81N.
    Rather, they have the flat files containing approved timesheet data of the consultants every month and want to upload the flat files. Is there any BAPI or BADI available for uploading such data monthly, to create a Service Entry sheet automatically? Is this feasible?
    Do other companies follow this procedure? Any ideas/suggestions are welcome.
    thanks
    M

    Hello ,,,
    BAPI_ENTRYSHEET_CREATE
    Take the help of ABAPER and write a upload progrme for creation of Service entry sheet.
    Mahesh Naik

  • Collective release of entry sheets in ML85

    Hi,
    When releasing multiple entry sheets in ML85, system posts one material document irrespective of vendor or purchase order.
    Where do i control this situation if i want one material document for one entry sheet?
    Regards,
    Adhi

    There will be one material document per entresheet only.
    Regards,
    Dakshesh

  • RESTRICTION OF CREATING SERVICE ENTRY SHEET

    Dera cons
    Creation of Service Entry Sheet in  ONE User ID(MMCONS) must be linked the Project type i.e one project ID .The same user I.D should not be able to create S.E.S of another Project type. How can we make setting for this. Is there any user exit available for this?PL. SOLVE IT.
    THANKS
    NRK

    Hi,
    Try in
    Setting Release Procedure
    Or
    Consult Basis Consultant for authirisation to user for  SES(creation) for particular project type
    Regards,
    Biju K

  • Double service entry sheet

    Dear friends,
    I have a probem in the shipment costs.
    Service entry sheet is created twice for the same shipment cost document.
    First time the service entry sheet is created for one PO and invoice and payment to vendor is completed for the same.
    Second time, for the same shipment cost,service entry sheet is created and updated in a different PO. Now the problem is since the payment to vendor is completed for the first PO. The newly created service sheets remain open.
    How to avoid the open service entry sheets from being paid to vendor.
    waiting for your valuable reply.
    regards
    Sampath

    If there is sufficient quantity in the PO, this cannot be prevented by the system.
    Have the data entry person write the SE Sheet number on the physical copy of the bill so that another person entering it can see that SE Sheet is done.
    Hope this helps,
    Lakshman

  • Error ' Quantity exceeds quantity in PO' in service entry sheet creation.

    Hi,
    I am getting error "Quantity entered 7,000 exceeds quantity 5,000 in purchase order' ,  Message no. SE363" while creating service entry sheet
    PO Quantity - 1 AU
    Service  quantity - 5 HR
    in service entry sheet creation i am giving 6HR instead of what is planned in PO
    Not sure what driving this error, please help
    Thanks

    Hi
    Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be  able to accept service overdeliveries even if you have the unlimited indicator set.                                                                               
    Regards,
    Mauro

Maybe you are looking for