AW01N - Asset Not Fully Depreciated, Only till 2014

Dear Gurus,
There was an asset created in 2010 with the useful life of 10 years. I.e the asset should fully depreciated in 2020. When I look at AW01N, Comparison tab, it shows the planned depreciatation of 4 years only. the asset only depreciates upto 2014 (it does not fully depreciate).
I looked into the FYV which is as well defined beyond 2014. Please let me know if there is any configuration missing.
Thanks
Edited by: Priyadarshini on Apr 25, 2011 6:12 PM

Hi Priya
It makes my belief stronger that the World is going to end soon.. SAP has also realized it... :).
Jokes apart, does your Multi Level Method (AFAMA / AFAMS)has "rem life" indicator ticked.... If yes, then the present behaviour is not justified unless and until
a. you have posted any Unplanned dep and hence, the total dep till 2014 equals the APC Value of the asset, or
b. you have specified any change over method in your Dep Key or
c. you have specified any Cut off value Key in your dep key / Scrap Value in the Asset Master
Does, any of these reasons hold good?
br, Ajay M

Similar Messages

Assets Not Fully Depreciating

Hi -
Does anyone know of a report that will identify assets that will not fully depreciate based on their current keys and expired useful lives?
Thanks,
Lynne

Hi Lynne,
you mean, a report that will identify assets that will not depfeciate to zero because of
- depr. key in combination witrh useful liefe
- Memo value
etc.?
No, there is no report for this purpose.
Perhaps RASIMU* could help you.
regards Bernhard
Edited by: Bernhard Kirchner on Oct 21, 2010 12:25 AM

Report needed listing of assets that fully depreciated during 2009

Hi All
want to receive a listing of assets that fully depreciated during 2009. Do we have any SAP standard report to get this detail.
Is there a transaction available to run this listing?
Your immediate attention would be much appreciated as the auditors want this info immidiately.
thanks in adv
Shubhada

Hi,
You can take this one S_ALR_87011963 - ... by Asset Number and filter all the assets with open zero amount and combine it with this one S_ALR_87012026 - Depreciation Current Year.
Regards,
Eli

Oracle Fixed Assets (11i) Fully Depreciated Assets...

Hi there
How to Find out that Assets is Fully Depreciated?
Is there any one field (Flag) on Screen or in any Assets table?
Thanks
ASIM

check that u r NBV bcomes zero

Unplanned Assets depreciation not fully depreciated

Dear all
I tried to manually fully depreciate 3 assets on the 02.03.2011
215513, 224082, 217200 (SAP: Europe R/3 production)
Some amounts remained in the schedule
Regards,
Narasimha Rao

Hello,
Unplanned depreciation will get posted at the month end; when you will post the depreciation through AFAB.
1. ABAA - Unplanned depreciation: Post on asset for the current period
2.AFAB - Run depreciation: Month end activity
After you run the t-code AFAB then the unplanned depreciation will be posted to the asset.
Thanks

Asset not getting depreciated properly on life basis.

Hi
I created one depreciation key Z011. Its on life basis.
Now i created legacy asset through AS91. Total life was 5 years and expired life as on date of upload is 3. Hence remaining useful life is 2 years.
WDV pending as on upload date is Rs.98000. Hence it should depreciate this remaining Rs.98000 over the two years.
However its depreciating Rs. 17210 only. When i checked parameters, it showed:
Depreciation Key: Z011
Base Value: Rs.100000
Remaining Life: 2 years
Dep Period: 366/366
Amount: Rs.50000
Reduction 32790.
Depreciation posted: 17210.
Now i want to know what is this Reduction amount and where does it came from.
I checked multilevel in AFAMS: "Reduction of base value by an entered percentage rate" is blank and there is tick on remaining life.
Please let me from where does its picking reduction amount: Rs. 32790

Its 01... Percentage is not there since i want it to calculate automatically on basis of life.
My problem is that its calculating properly. But its calculating some reduction percentage also. Where i need to check if i have given reduction percentage?.
Edited by: Deepak Agrawal on Oct 16, 2011 9:00 PM

Intracompany asset transfer of depreciation only

We have some assets that were loaded with our legacy load. They have no APC value, only Accumulated Depreciation.
Is it possible to partially transfer these assets to other assets Accumulated Depreciation that have APC without affecting the APC of receiving asset.
Also, if I wanted to transfer the one asset to many assets, does anyone have a suggestion.
Thanks

Thanks Raj. You are right, ABMA will work. I was looking for something to allow me to transfer a large accumulated depreciation asset to the accumulated depreciation of many smaller assets. I am talking about 1000's of assets so ABMA would be very time consuming.
I am thinking that my best alternative may be ABAP.

How to check whether an asset is fully retired or not ?

Hi All,
Where can I see whether an asset is fully depreciated or not from the backend?
Whats the table and the field?
Thanks and Regards,
MPH

You should log into EBS front-end them go to Assets responsibility, from there you go to Asset Workbench, query your asset, and you will be able to check if the asset is fully retired or not.

Updating fully depreciated assets during creation of subsequent depreciation area

I am subsequently adding multiple depreciation areas in SAP. The system has been live for many years with a legacy system handling the depreciation for the tax books via dual maintenance. I have been able to bring in the new areas via AFBN without issue except for one thing. Many of these assets are fully depreciated in Book01 in SAP but they have remaining tax life. The problem is when the asset is fully depreciated and I assign it cost or try to make a change in the depreciation area tab it automatically fully depreciates those values.
Has anyone ran into this before? What options are there to provide a solution?
To recap; Want to add tax book values to assets already live in SAP. Issue is assets already fully depreciated. Any adjustment to keys and UL on them results in a calculation but regardless it fully depreciates whatever that amount will be.
Many thanks,
Jack

Hi Jack,
I suppose, there are some settings somewhere, which do not allow the asset to have values.
Presumption:
1) AFAMA - Base method -Treatment of end of life: In the depreciation key: there is not "dep. after pland. life end" allowed
2) In OADB there are wrong settings (perhaps no positive acquisition values allowed)
3) Perhaps this is constitutional area and in OADB there is rule for the derived area which is broken.
Best regards Bernhard

Not posted depreciation for an fixed asset

Dear SAP Guru's,
I have the following situation at my company:
I have an asset where the first APC value was posted in year 2000. The useful life for this asset was 3 years.
That means in 2003, the asset was fully depreciated.
The problem is that in 2004 it was made again an APC posting on this asset, but nobody has seen that the useful life still ended. Therefore this amount was never planned for depreciation and as consequence it was never depreciated.
Now the problem is that the financial department wanted to retire this asset but they received the error message that they can not retire the asset because there is still value on the asset.
Which options do I have in this case to be able to plan and post the whole remaining depreciation in this month (31.11.2010) in order to do after wards the retirement?
Thanks,
Best regards,
Melitta

Hi Melitta
1. Do an un-planned dep posting or
2. Better and simpler option would be do ABSO using Transaction type 101... You can enter a P&L account of your choice (Which will be Debited) and asset will be receiving the off set posting
Regards
Ajay M

Additions to existing fully depreciated assets

We have scenario wherein Assets useful life is over but still asset is in use.
Asset is fully depreciated however Gross APC/*** Deprn is shown in books.
Now we would like to make additions to this asset & would like to post Deprn in a normal way as if new asset is created.
Kindly advice as to what will be best practice/steps to be followed in SAP to meet such requirement
Thanks
Nikhil

Hi Jack,
I suppose, there are some settings somewhere, which do not allow the asset to have values.
Presumption:
1) AFAMA - Base method -Treatment of end of life: In the depreciation key: there is not "dep. after pland. life end" allowed
2) In OADB there are wrong settings (perhaps no positive acquisition values allowed)
3) Perhaps this is constitutional area and in OADB there is rule for the derived area which is broken.
Best regards Bernhard

How do you list fully Depreciated Assets in SAP?

Hi experts:
My client has some assets that are fully depreciated in reality. The client has created a fully depreciated asset in newly configured SAP system. She wants the asset to be listed in SAP as fully depreciated and depreciation should not be recalculated again. How do I configure to achieve this?
Thanks so much for your help!
QuinB.

Check the base method you have used in the Depr keys. Follow the below path:
IMG-> Asset Acctng ->Depreciation-> Valuation Methods-> Depreciation Key-> Calculation Methods-> Define Base Methods.
Ensure that the field "Dep.below NBValue zero" is marked No. This will restrict your system to post the Depr till it is equal to APC and not beyond that.
Please check your fully depreciated asset under AW01N, see whether the planned values is zero or not. If it is zero, then your configuration settings is correct. But still check it out and confirm yourself.

How to handle a fully depreciated asset that has been brought back to life?

I have an old fully depreciated asset(from the 1990s) that has been brought back to life and has new cost to add to it.
The fixed asset master data looks like this:
Capitalization date: 01.01.1998
Historic APC: 0
Acquisition value: X
NBV: 0
Ordinary depreciation: X
Depreciation tab - no planned depreciation(for current fiscal year).
Now I want to add the new cost Y to it. I add a subsequent acquisition but the planned depreciation (on the Depreciation tab) is not what I expect. I can't figure out how it is getting that amount. Calculation should be Y / Useful life starting 1st day of current period.
The depreciation type setup is NBV / Rem life, straight line depr, prorata temporis.
Any ideas?
Thanks

Okay, I have just realized how the system is calculating depreciation.
useful life = 36.
There are 3 months left in the current fiscal year. Depreciation is calculated as Y / (36 -9) = one month's depreciation.
Why? Is this correct from accounting point of view? My client expects the calculation to be Y / 36 even though we are in period 10 of the current year.

Fully depreciated asset list

Hello,
How can i get a list of the assets that are fully depreciated?
Thanks!

Hi Lidya,
I did not completely understand the problem and the objective for which you'd need such a report.
However, S_ALR_87012936 (Depreciation Simulation) is one report that we generally use for determing the depreciation amount expected to be posted.
If this is not useful for your purpose, wud request to slightly elaborate on your requirements.
Thanks n Regards,
Nitin

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

http://support.apple.com/kb/HT4236

AW01N - Asset Not Fully Depreciated, Only till 2014

Similar Messages

Maybe you are looking for