AX connects successfully to wireless network - itunes does not see it.

I have connected my AX via wireless to my Belkin N600 DB router and the light is green. The Airport utility recognises the AX, and I have set it up to use external speakers.  However, iTunes will not allow me to select other speakers. Please help?  What other settings am I missing? Is this possibly the firewall? I've a new Win7 PC.

I have not used Windows for 4-5 years, so cannot provide the best information.
I was always able to access the Windows Firewall in the Control Panel and locate a tab or page for "exceptions" or "blocked attempts". It was a simple matter to tell the Firewall to "Allow" the attempt by iTunes to connect to the AirPort Express.
Perhpaps some other Windows users can help with more details on the newer Windows 7.
I do not know if installing Bonjour for Windows will help, but it could not hurt....and  you will need it if you want to connect a printer to the AirPort Express.

Similar Messages

  • Netctl fails to connect to a wireless network and does not give detail

    If I try to connect to a wireless network (WEP, DHCP) using netctl I get "Jon for netctl@wlp2s0\x2dnetworkname.service failed." and two commands (journalctl -xn and systemctl status ...) that should give details about the error.
    However, both of them give the following lines:
    oct 05 14:44:25 laptop network[422]: Starting network profile 'wlp2s0-networkname'...
    oct 05 14:44:30 laptop network[422]: Failed to bring the network up for profile 'wlp2s0-networkname'
    oct 05 14:44:30 laptop systemd[1]: netctl@wlp2s0\x2dnetworkname.service: main process exited, code=exited, status=1/FAILURE
    oct 05 14:44:30 laptop systemd[1]: Failed to start Networking for netctl profile wlp2s0-networkname.
    oct 05 14:44:30 laptop systemd[1]: Unit netctl@wlp2s0\x2dnetworkname.service entered failed state.
    Just one line saying that it was trying to connect and four lines repeating the same thing (connecting failed), but it does not give any detail at all.
    The netctl profile is:
    Interface=wlp2s0
    Connection=wireless
    Security=wep
    ESSID=networkname
    IP=dhcp
    Key=\"hex-password
    Last edited by eduardosm (2014-10-05 14:01:02)

    MoonSwan wrote:Either this Key=\"hex-password was a typo when you cut & pasted that code or your issue is that you need a closing " symbol.  So your line should read:  Key=\"hex-password".
    If you look at the netctl.profile man page, it explains some special quoting rules at the end.  The literal double-quote (or escaped double-quote) actually just results in a non-quoted string when passed from netctl to the underlying supporting software.  This is apparently necessary if the WEP key is in hexadecimal.

  • Itunes does not see my device when connected

    As above when I plug iphone in, itunes does not see my device. i have repaired the itunes files. I have deleted all itunes files and re-installed and still no good.
    When I do connect the usb to my iphone the computer bleeps three times in succession.
    Has anyone got any advice as to what to do next?

    Try this... http://support.apple.com/kb/TS1495

  • PC itunes does not see network

    Hi all,
    My MM can see the itunes Airport speakers, but the itunes does not see the speakers (the dropdown menu at the bottom of the interface) on my PC laptop. It used to, but since I switched routers it doesn't anymore. Any idea to configure the PC itunes?

    fixed itself it seems.

  • Wiped our old iPad 1 clean, now can't install iOS from iTunes.  iTunes does not "see" the devise.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.

    Wiped our old iPad 1 clean, now can't install iOS from iTunes using laptop PC (W Vista).  iTunes does not "see" the device.  Tried uninstalling and installing iTunes on laptop.  Also bought new USB cable.  The iPad is charging, but that's all it does.  Just want to get it operating again for browsing and e-reading.

    OK.  You merely erased the content and settings.  The IOS is still there.
    If it has NEVER been jailbroke, here are some standard repair procedures.  From what you've already stated, my guess is that you'll end up with Recovery Mode described in the last paragraph.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Itunes does not see ipod touch

    Upgraded Itunes11.0.0.163 for Windows 7 64 bit.  Running on Asus Laptop.  Windows 7 Ultimate 64 bit.
    Itunes does not recognize ipod toch Gen 4 updated to ios 6
    Totally uninstalled and manually cleaned all itunes software several times.
    Reset iPod touch offline several times.
    Updated iPod touch driver.
    WIndows ses the iPod as portable device, iTunes does not see it. 
    Any ideas on why I can't use iTunes with my touchi?  Has anyone hadluck with non apple softyware, seems apple has made a mess of itunes on this version.  I've been throught multiple threads on reinstalling and with tweaks.  I've read the apple device is faulty in this latest version, any news on when this fault will be fixed?  Love to hear from an Apple person on this.  Samsung is looking more and more attractive.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I updated to iTunes 10.7 and now iTunes does not see my iPod Touch.  It says the Apple Mobile Device USB Driver cannot be installed.

    I updated to iTunes 10.7 and now iTunes does not see my iPod touch.  After the update I got a message that the Apple Mobile Device USB Driver could not be installed.  I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem.  I have followed the suggested fixes in Apple Support.   Any suggestions?  Thanks!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • TS1538 itunes does not see any of my devices.

    itunes does not see any of my devices.  It used to. But not any more. Why. They show up in Windows. But not itunes.
    <Edited by Host>

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with               
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or               
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Moved to new PC from WinXP to Win7, and iTunes does not see library

    My old laptop was running Windows XP. My new laptop is running Windows 7. I installed iTunes and copied my the contents of my "iTunes Music" directory into the "iTunes Media" directory (from "Documents and Settings/<user name>/My Documents/My Music/iTunes/iTunes Music/ into "Users/<user name>/My Music/iTunes/iTunes Media).
    My iTunes Media directory on my old laptop was set to the iTunes Music directory, and my iTunes Media directory on my new laptop is set to the iTunes Media directory. However, iTunes does not see my music on my new laptop.

    My old laptop was running Windows XP. My new laptop is running Windows 7. I installed iTunes and copied my the contents of my "iTunes Music" directory into the "iTunes Media" directory (from "Documents and Settings/<user name>/My Documents/My Music/iTunes/iTunes Music/ into "Users/<user name>/My Music/iTunes/iTunes Media).
    My iTunes Media directory on my old laptop was set to the iTunes Music directory, and my iTunes Media directory on my new laptop is set to the iTunes Media directory. However, iTunes does not see my music on my new laptop.

  • ITunes does not see airport express speakers but airfoil does

    iTunes 6.0.2 and AE 6.3
    iTunes does not see the AE speakers but Airfoil does.
    Have restarted AE to no avail.

    Having a similar problem. iTunes 6.0.2 "sees" the Airport Express but cannot select the speakers associated with the Airport. iTunes 6.0.1 works on a Mac Mini with the same Express. Tried to re-load the system from the CDs but iTunes 6.0.2 still on

  • How do I (re)add a device? New iTunes does not see an iPad or IiPhone.

    How do I (re)add a device? New iTunes does not see an iPad or IiPhone.

    Go here and download and install iTunes on your PC
    http://www.apple.com/uk/itunes/download/

  • Itunes does not see ipod shuffle?

    brand new iPod shuffle, itunes does not see it. the computer sees it but not itunes. have tried all support tips.

    Have you had a chance to look at this troubleshooting page? It may be of some help: iPod shows up in Windows but not in iTunes

  • TS1538 after a restore, the itouch screen has a "USB arrow to iTunes" picture.  Now iTunes does not see the itouch and my itouch is non-responsive

    i was restoring my itouch and after completed, the itouch screen has a "USB arrow to iTunes" picture.  Now iTunes does not see the itouch and my itouch is non-responsive

    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?

    You may need to put the iPad in recovery mode to restore it.
    http://support.apple.com/kb/HT1808

  • ITunes does not see shuffle

    I purchased an iPod shuffle for my girlfriend. Loaded about 40 songs then repacked and gift wrapped it before giving it to her. She has iTunes on her computer and it is updated. When I hook up her iPod, iTunes indicates it is not authorized so I authorize the ipod but the icon does not appear so it seems that iTunes does not see the shuffle. Please advise.

    Shuffles are a bit different, they can only hook up to one PC
    http://support.apple.com/kb/HT1202
    I would restore it to factory settings using your PC, then see if her PC will recognize it.

Maybe you are looking for

  • Problem with Pushlet (and/or Thread Competition?)

    Hi all, Once again, I'm in over my head and have approximately four hours to dig myself out. I have a client-server application. One the client side is an Applet that runs Java 3D and has a JavaPushletClient / JavaPushletClientListener pair (from Pus

  • Error when run a simple sample using jsp tag

    When i run a jsp using jsp tag, the tomcat gave me the following information: Resolve entity failed-//Sun Microsystems,Inc.//DTD JSP Tag Library 1.2//EN http://java.sun.com/dtd/web-jsptaglibrary_1_2.dtd My tld file is: <?xml version="1.0" encoding="I

  • INDEX on VIEW or TABLE when using CONTAINS function on the VIEW

    Hi, I'm querying a view with a contains function and I'm getting an error: query: select * from view where contains(name,'jack OR jill')>0 ORA-20000: Oracle text error DRG-10599 column is not indexed. From what I gathered you can't create an index on

  • Ctrl+Shift Pasting within Same Document

    So I dont know if this is possible, if its not, I'd like to request it be added to future releases I have an animation which requires all frames be on the same document, for example, if the animation was 50x50 pixels, and there were 10 frames, my doc

  • How to show a new value in a legend

    Hi for All, I have a DataObject with the following data: Name   Date Table  4/10/2012 8:40:13 AM TV     4/10/2012 8:45:13 AM Table  4/10/2012 8:46:13 AM Table  4/10/2012 8:47:13 AM TV     4/10/2012 8:48:13 AM Table  4/10/2012 8:50:13 AM I'm creating