Azure Website not reachable after successful publishing via VS

Hello,
I created a website (which locally runs without any problem) in VS 2013 pro and published it to Azure with Azure Tools. Everything looks good when publishing (the wizard says it can connect to the new web address and 'Web Publish Activity' tool window says
'Publish Succeeded'.)
However, when I try to browse the site on Azure ('https://www.yoursite.azurewebsites.net/') it doesn't work and I get ther error 'ERR_TUNNEL_CONNECTION_FAILED'.
Am I missing something? Do I have to do something in addition to just publishing the site from Visual Studio?
I'm quite unexperienced with Azure. Can someone tell me what the problem is or where I have to search for it?
Thanks in advance
Thomas

I have seen this happen a few times myself, It is the time between the deployment and the site start that is causing this issue, If you deploy from Visual studio, Visual Studio pops up a browser window for your site, sometimes for a large site that browser
starts before the site does, you can try a inprivate session and hit your site after VS deploys. 
The issue happens as VS doesn't know the site has come up :(.
Let us know if you are not able to hit the site after the VS in any browser session, that is a serious problem that needs to be addressed.
-CB
Mark as Answer, Helps us help you better ! :). = CB

Similar Messages

  • Windows Azure Website WCF baseAddress after Publishing to Azure

    Hi!
    I have a WCF service, hosted on IIS, that works fantastic when not published, (localhost).
    If I however publish my project, (azure website, NOT cloudapp), to Azure it no longer works. I understand that there is no localhost with azure so I am fully aware that it should not work.
    What I need help with
    Would someone be so kind and provide me with a step by step guide on how to update the baseAddresses after the project is published? I have looked everywhere for this but I cant seem to find a guide.
    WCF Service Library, App.config
    <client>
    <endpoint address="http://localhost:8080/UserWCF" binding="wsHttpBinding"
    bindingConfiguration="WSHttpBinding_IUserService" contract="Fildela_WCF.IFildelaService"
    name="WSHttpBinding_IUserService">
    <identity>
    <userPrincipalName value="REFT\filip" />
    </identity>
    </endpoint>
    </client>
    <services>
    <service name="Fildela_WCF.FildelaService">
    <endpoint address="UserWCF" binding="wsHttpBinding" contract="Fildela_WCF.IFildelaService" />
    <host>
    <baseAddresses>
    <add baseAddress="http://localhost:8080" />
    </baseAddresses>
    </host>
    </service>
    </services>
    When published and navigating to pages that use the WCF service, i get this error:
    An attempt was made to access a socket in a way forbidden by its access permissions 127.0.0.1:2112
    I have tried to set the baseAddress and endpoint address to my azurewebsite url, mywebsite.azurewebsites.net/8080 but it wont work. I am totally a newbie with this so please bear with me.
    Thank you

    Hi sir,
    Did you try to use this link?
    http://mywebsite.azurewebsites.net/yoursvcfilename.svc
    I think you can try this link in your browser to check whether your deployment is rightly.
    Any results, Please feel free to let me know.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • CRT results are not appearing after successful payroll run

    CRT results are not appearing after successful run of US payroll, however, RT results are appearing.
    Please suggest ideas to find the results of CRT.

    Hi Rémi Corriveau,
    Thank you for spending your time to answer my question.
    Here are the answers to your questions . . . .
    QUESTION: Did you run a Payroll Simulation or a live Payroll Calculation ?
    ANSWER: We did a LIVE payroll run for a period of 3 months.
    QUESTION: Did you use t-code pc_payresults ?
    ANSWER: Yes, we used the t-code pc_payresults but still it doesn't show the CRT results.
    QUESTION: Did you check Processing Class 30 and 70 for your WTs ?
    ANSWER: As per the process, we copied the SAP standard (model) Wage Type M010 to
    our customized Wage Type, hence, hope that it wouldn't disturb any of the standard SAP settings.
    However, we did check the Processing Class 30, but did not check the processing class 70.
    Shall update you once PC 70 is also checked.
    Please educate, if there are any particular specifications that need to be entered while checking
    for our WTs in PC 30 & PC 70.

  • Is the apple website not opening after installation of mountain lion?

    is the apple website not opening after installation of mountain lion? because after i updated from lion, apple's webpage is like not opening from any browser..even from safari..

    And other websites work? Do you mean http://apple.com, or a specific page within their website? The main page loads fine for me.

  • Azure website is stopped; after free trial what happens next?

    Hi,
    My Azure website is stopped and I don't understand why. Restarting it doesn't work.
    I have a free trial subscription, which seems to expire today.  I would like to upgrade it but there is no information about the financial impact of upgrading.  I found this link about the different service tiers:
    https://msdn.microsoft.com/library/dn741336.aspx
    But there is no finance information.  They give you links into all kinds of documentation but the basic question of what to do after free trial subscription ends is nowhere.
    I was able to link to a Web page that details monthly charges (which unfortunately now I couldn't find) where a developer pays $29 monthly and standard subscription costs $300 monthly. I need a standard but I don't have that money to burn. So I'm thinking
    of the developer plan but I don't know what services go with it.  What happened to the pay-as-you-go? Where is the explanation for what services are included in that plan? Where
    are the plans? Why can't I find it in the Azure portal?
    Appreciate anyone with suggestions.
    Marilyn Gambone

    Hi,
    If your Free trial is going to expire and you would like to continue with the azure services, recommend you to go for pay as you go service. click Buy
    here for pay as you go service.
    This offer is billed at the standard
    Pay-As-You-Go rates and You will be notified at least 30 days in advance of any changes to the Pay-As-You-Go rates. New services may be added periodically to the Azure platform. Other details
    here.
    Estimate your expected monthly bill using the
    Pricing Calculator, and track your actual account usage and bill at any time using the
    billing portal. Setup
    automatic email billing alerts to be notified if your spend goes above an amount you configure.
    Also, I would like to clarify that if you want to scale the websites, the websites must be in the basic or standard mode. When we create basic or standard website in free trial account, the website consume the credits limit
    of azure free trial account. But if the free trail is expired, your service will be stopped and your data will be stored 3 month unless you reactivated it or became the paid users .
    Please find the purchase options below :
    Pay-As-You-Go Subscriptions
    Pay-As-You-Go subscriptions are our most popular and flexible payment plan. There are no minimum purchases or commitments and you can cancel anytime. You can pay for them by credit-card as well as by invoice.
    Learn more
    Microsoft Resellers
    You can work with the same resellers that you already purchase Microsoft software from using the
    Open Volume License Program. If you already have purchased Azure from a reseller and have an Open license key, you can activate your Azure subscription or add more credits to it
    here.
    Learn more
    Enterprise Agreements
    Large organizations often sign up for a Microsoft Enterprise Agreement (EA). By making an upfront usage commitment to Azure they earn several additional benefits—including flexible billing options and our very best prices.
    Learn more
    If you need assistance in puchasing,  you may also raise a free billing support via this
    link . Feel free to write back for any queries.
    Regards,
    Shirisha Paderu

  • Using AzureContinuousDeployment.11.xaml template to deploy to Azure Website not working

    I have a visual studio online account and have set up continuous deployment using the AzureContinuousDeployment.11.xaml and set the Azure Website property to my publish profile, however when the build is running, it complete but never deploys.
    If however, I use the TFVCContinousDeployment.12.xaml (http://azure.microsoft.com/en-us/documentation/articles/cloud-services-continuous-delivery-use-vso/)
    then it does deploy as expected.
    Any ideas?

      <connectionStrings>
        <add name="MyWhesEntities" connectionString="metadata=res://*/MyWhesModel.csdl|res://*/MyWhesModel.ssdl|res://*/MyWhesModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data
    source=localhost;initial catalog=mywhes;integrated security=True;MultipleActiveResultSets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" />
        <add name="MyWhesContext" connectionString="tcp:ngw4ziez6g.database.windows.net,1433;Database=mywhes;UserID=********;Password=********;Trusted_Connection=False;Encrypt=True;Connection Timeout=30;" providerName="System.Data.SqlClient"
    />
      </connectionStrings>     
    Hello James,
    Your Entity Framework Model "MyWhesEntities" connection string is still pointing to a local server, not to SQL Azure; or do you change it during runtime in your code?
    And you should add the "data source=" property name to your second connection string, it's missing.
    Olaf Helper
    * cogito ergo sum * errare humanum est * quote erat demonstrandum *
    Wenn ich denke, ist das ein Fehler und das beweise ich täglich
    Blog
    Xing

  • CUE Website not reachable

    Hello,
    we've configured a UC560 with Cisco Standards. So the CUE has the IP-adress 10.1.10.1 (Gateway .2).
    The CUE successfully answer a ping ! The CCA CUE diagnostics ended successful.
    I also can connect to CUE through CLI of the UC560.
    BUT : The Webinterface of the CUE does not answer. The webiste ist not reachable.
    Here the http config of the UC560 :
    ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    ip http path flash:/GUI
    telephony-service
    video
    fxo hook-flash
    max-ephones 138
    max-dn 600
    ip source-address 10.1.1.1 port 2000
    auto assign 1 to 1 type bri
    calling-number initiator
    service phone videoCapability 1
    service phone ehookenable 1
    service dnis overlay
    service dnis dir-lookup
    service dss
    timeouts interdigit 5
    system message Cisco Small Business
    url services
    http://10.1.10.1/voiceview/common/login.do
    url authentication
    http://10.1.10.1/voiceview/authentication/authenticate.do
    cnf-file location flash:
    cnf-file perphone
    user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
    network-locale U4
    load 7941 SCCP41.9-1-1SR1S
    load 7941GE SCCP41.9-1-1SR1S
    load 7961 SCCP41.9-1-1SR1S
    load 7961GE SCCP41.9-1-1SR1S
    load 521G-524G cp524g-8-1-17
    time-zone 23
    time-format 24
    date-format dd-mm-yy
    dialplan-pattern 1 5909.. extension-length 2
    keepalive 30 auxiliary 4
    voicemail 39
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    moh flash:/media/music-on-hold.au
    multicast moh 239.10.16.16 port 2000
    web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern .T
    transfer-pattern 0.T
    transfer-pattern 6.. blind
    secondary-dialtone 0
    and the telephony part :
    telephony-service
    video
    fxo hook-flash
    max-ephones 138
    max-dn 600
    ip source-address 10.1.1.1 port 2000
    auto assign 1 to 1 type bri
    calling-number initiator
    service phone videoCapability 1
    service phone ehookenable 1
    service dnis overlay
    service dnis dir-lookup
    service dss
    timeouts interdigit 5
    system message Cisco Small Business
    url services http://10.1.10.1/voiceview/common/login.do
    url authentication http://10.1.10.1/voiceview/authentication/authenticate.do
    cnf-file location flash:
    cnf-file perphone
    user-locale U4 load CME-locale-de_DE-German-8.1.2.2.tar
    network-locale U4
    load 7941 SCCP41.9-1-1SR1S
    load 7941GE SCCP41.9-1-1SR1S
    load 7961 SCCP41.9-1-1SR1S
    load 7961GE SCCP41.9-1-1SR1S
    load 521G-524G cp524g-8-1-17
    time-zone 23
    time-format 24
    date-format dd-mm-yy
    dialplan-pattern 1 5909.. extension-length 2
    keepalive 30 auxiliary 4
    voicemail 39
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    moh flash:/media/music-on-hold.au
    multicast moh 239.10.16.16 port 2000
    web admin system name cisco secret 5 $1$xdzm$dQ00q0.IUYeRDA4lTuNIl1
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern .T
    transfer-pattern 0.T
    transfer-pattern 6.. blind
    secondary-dialtone 0
    Can the problem be based on corrupt http CUE files or the wrong version ? Which files are required ?
    May the Firewall ACLs block this traffic ? But ping works !
    Please help !
    Greets
    Huck

    That usually happens when your PC is using a default gatway that doesn't know about CUE address subnet.
    So you have to fix your routing.

  • ISE 1.1.3.124 secondary node not reachable after registration

    G'day All,
    I'm constantly seeing that the sync and replication status for my secondary admin/monitor node in the primary node as node not reachable. The secondary still thinks it is in standalone mode. When I run the ISE diag tool connectivity tests I am able successfully ping the devices from each other using both hostname and ip and the nslookup also works fine between both nodes. Ping and nslookups also work from different networks within the environment. The two nodes are in the same vlan on a 6500 vss pair but on different switches of the pair. I'm new to ISE so any help is greatly appreciated.
    Thanks All.
    JS
    Sent from Cisco Technical Support iPhone App

    Hi Saurav,
    Thanks for your prompt repsonse...
    I have worked through that section of the document. The registration completes successfully, I've got NTP sync on both nodes and the system time on both nodes is identical.
    I am only using the self signed certificates, but following the user guide instructions I have imported the secondary's cert into the primary node.
    Just as of about 30 minutes ago, I saw an alarm on the Secondary ISE node stating that a Slow or Stuck Replication has been detected...
    As I said in the original post, I can ping the fqdn's from each other so it appears that the DNS requirements have been satisfied.
    I've changed the admin account password, I am certain that the ISE DB passwords are correct and the same on both nodes and the timezones for both nodes is the same also....
    It looks to me that registration is fine, but the first full replication isn't completing successfully
    Thanks,
    JS

  • Website not scrolling after 2014.1 update

    This is happening to only one website not having this issue on some others. After updating to 2014.1 the website doesn't scroll vertically. I check on all browsers and different computers same thing. Is there any of you having the same issue? I bet this must be related to a javascript issue but not pretty sure.

    Sorry for a delayed response , But I think the issue is resolved ?
    Thanks,
    Sanjit

  • Ise node is not reachable after upgrading 1.2

                       Hi, I was using beta version of ISE with 1.2.834 code. and now the official release came out so I upgraded it.
    after that, the ISE is not communicating with AD, and when I go to download logs, It says node is not reachable even though it is STANDALONE mode.
    does anyone know how to work around this ?
    should I just delete everything and go from scratch ?

    The ISE is not communicating to the AD, So, you have to rejoin the domain. For this purpose please follow the following actions:
    Go to Administration > Identity Management > External Identity Stores and select Active Directory from the left-hand pane.
    Click Join at the bottom of the configuration page:
    Also please check the LDAP port

  • Adobe Captivate 7 will not open after successful installation

    After successful installtion of Captivate 7, I am unable to open/run the program.  The error message below is received when attempting to open the program.  I've installed/uninstalled the program twice both with the same results.  Any thoughts on why this is happening??
    My system details:
    Windows edition:  Windows 7 Enterprise SP 1
    Processor:  Intel(R) Core(TM)2 Duo CPU
    Installed memory:  4.00 GB

    Hello and welcome to the forum,
    Did you install on the system itself, hopefully not on a networked drive? And is the default folder 'My Documents' on your system as well?
    Which version: 32-bit or 64-bit. 4GB of RAM and a Duo, I would recommend 32-bit really.
    Do you launch Captivate as an Administrator?
    Lilybiri

  • Company Portal not installing after successful enrolment

    Hey up guys,
    After some more advice please.
    So I have Intune integrated with SCCM and the Company Portal App is signed using the Symantec Cert, then imported and deployed to my Intune User Collection. So far so good.
    Now when we enrol a device (WP8 or WP8.1) it goes through ok and enrols successfully and any policies apply fine, however the company portal app never installs. I have tried emailing and installing and click "download hub" In workplace
    both of which do nothing at all, no errors - I have looked through here
    Company Portal not installed after enrolling but as I have said I don't get errors, the device enrols and policies apply just no Company POrtal App.
    Has anyone else experienced this before, are we missing something obvious?

    Hi, Aaron,
    You say you're using this with ConfigMgr, in what we call a Hybrid configuration. When you configured the Windows Phone MDM page in the Intune Subscription wizard, which did you upload- the PFX or the AET of your Symantec cert? Also, I'm assuming you're
    using your own Symantec cert and not the trial cert, but correct me if I'm wrong there because it matters.
    It sounds like you've tried this on at least 2 different devices, right? 8 and 8.1? Do you have a "clean" device you can try it on, one that hasn't been enrolled or unenrolled previously? If so,
    without enrolling, try mailing the .aetx (generated using the AET generator in the WinPhone SDK) and the SSP signed by the same cert and see if you can sideload that way. Just trying to eliminate
    as many variables as possible. If you take Intune completely out of the picture and just do the manual AET and SSP deployment and it
    still doesn't work, then there's something wrong with your ssp.xap - try downloading it again, in case it got corrupted, and then try signing it again. I swear a few times I've signed something, didn't get any errors, and it wasn't working. I had a
    tester sign it for me and it worked. Don't know why. You can even try signing any other .xap file you know works and see if you can sideload that.
    Cathy Moya PM, Windows Intune/System Center Configuration Manager This posting is provided AS IS with no warranties and confers no rights.

  • Swf files are not playing after being published

    i am trying to run the 'connector' example that comes bundled with smartfoxserver2x downloads..there it connects to the server and loads the correct configuration file. when i run it in adobe flash professional 5,it runs correctly and connects to the server but after being published as SWF movie,it doesnt work.it loads the configuration file but cant connect and gives error connection failure..ERROR 2048
    this is the example i am talking about. http://docs2x.smartfoxserver.com/ExamplesFlash/connector
    flash

    that's probably a local security restriction you have.  reset it to allow your swf to communicate across your local sandbox to the internet:  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    or test online.
    in the future, please copy and paste complete error messages.

  • URL is not change after successful authenticate with ISE 1.1.1

    Hi,
    I have setup Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)
    Everything is complete unless the URL redirect. My guest client can join the Guest SSID and also can authenticate to ISE.
    But after they success to authenticate with ISE, the URL in the browser doesn't change to the pre-configure. It still be something like https://ise-ip:8443/guestportal/redir.html . Anyway the content in the browser is changed to the URL that being configured such as http://www.google.com/
    How can I do with this situation cause everything is working fine but only the browser URL that is not change to the preconfigure one.
    Thanks,
    Pongsatorn

    Hi,
    This is the user experience when using central web authentication:
    http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080ba6514.shtml#final
    Here is the process when you use local web authentication:
    http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_guest_pol.html#wp1295223
    Hope this helps,
    Tarik Admani
    *Please rate helpful posts*

  • UPK preview topic not displaying after being published

    After preview topic loads, it will not display. We have already disabled popup blocker. Any help would be appreciated..

    Hello,
    Please log a support ticket using My Oracle Support (http://support.oracle.com/). They will be able to assist you.
    In the meantime, I would suggest publishing to the Player style to test the content and to see if you have similar problems launching content. If you have similar problems, it might be a bit easier to see what's happening since you can keep trying to open the content without going through the preview.
    Best regards,
    Marc

Maybe you are looking for