UPK preview topic not displaying after being published

After preview topic loads, it will not display. We have already disabled popup blocker. Any help would be appreciated..

Hello,
Please log a support ticket using My Oracle Support (http://support.oracle.com/). They will be able to assist you.
In the meantime, I would suggest publishing to the Player style to test the content and to see if you have similar problems launching content. If you have similar problems, it might be a bit easier to see what's happening since you can keep trying to open the content without going through the preview.
Best regards,
Marc

Similar Messages

  • Picture files only partially display after being published

    Recently .jpg and .png pictures I have created only partially display after being published.  I've tested it using Paint, Publisher and Gimp with mixed results. The pictures display correctly when I view them locally on my pc.
    Here are the test pictures I made in each program:
    http://www.bgchamber.net/images/GimpTest.jpg
    http://www.bgchamber.net/images/PublisherTest.jpg
    http://www.bgchamber.net/images/PaintTest.jpg
    The only pictures that fully display are those that were taken from a camera, but after I resized one in paint, it also didn't display properly. My question really is, is this an issue with Microsoft Expression Web or with the server hosting the files?

    Publisher is NOT a photo editing program. Neither is Word. Nor is Paint.
    You need a real, and simple, photo editing program. Paint.NET is a good, free one. I find GIMP cumbersome (but it's batch processing is handy). And your graphics aren't being created and saved properly. For example, the events.html page has graphics on it
    that total well over 3 MegaBytes! Pity the poor soul with a wireless connection. The graphics on the events.html page are largely illegible, and as such serve no real purpose (and make the site look bad).
    Let's take an example...on the home page gallery is a graphic for the 2015 Chamber Scholarship. It's displayed at 525 x 340 pixels, yet the image sitting on the server (and which must be downloaded by the visitor) is 1275 x 825 pixels. So you have an unnecessarily
    large graphic taking space on the server, having to download to the visitor's computer at full size, and then be shrunk by the browser to only 17% of the original area. That file should be created and saved in a proper graphics program at the final size you
    plan to use (and in this case, use PNG format). The larger file takes at least 5 times the storage space on the server as a properly sized file (and takes 5 times as long to download and upload).
    I've superimposed the display size on top of the full size and shrunk them down to display here in the forum. See below.
    All the graphics that I have checked on your site have the same problem, and if your site has been up a long time and you haven't cleaned out the old files on the server, you may have run out of server space, which would corrupt the new files.
    Smaller files will also upload faster and more reliably. Plus--browsers stink at resizing graphics. Do that in a proper graphics program to get the best quality.
    Use JPG for photos, GIF for hard-edge graphics with few colors and no gradations/shading, and PGN for hard-edge graphics with full color and gradations/shading. And make sure you are saving the images in the proper version of the format (RGB for web).
    A horse walks into a bar. The bartender asks "Why the long face?"
    "Because I was born into servitude and when I die my hooves will be used to make glue."
    It was at this point that the bartender realized he would not be getting a tip.

  • Swf files are not playing after being published

    i am trying to run the 'connector' example that comes bundled with smartfoxserver2x downloads..there it connects to the server and loads the correct configuration file. when i run it in adobe flash professional 5,it runs correctly and connects to the server but after being published as SWF movie,it doesnt work.it loads the configuration file but cant connect and gives error connection failure..ERROR 2048
    this is the example i am talking about. http://docs2x.smartfoxserver.com/ExamplesFlash/connector
    flash

    that's probably a local security restriction you have.  reset it to allow your swf to communicate across your local sandbox to the internet:  http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l
    or test online.
    in the future, please copy and paste complete error messages.

  • RH Window not updating / topics not displaying after repositioning

    Hi,
    I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
    For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
    The navigation along the top (including the topic tabs) does not refresh.
    If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
    If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
    Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
    Is anybody else experiencing these problems? Is there a solution?
    Thanks
    Eileen

    Thank you for those suggestions, Peter!
    You were right - I was dragging the two windows to where I wanted them.
    I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
    BTW, RH is the only application where I was having this problem.
    I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
    Thanks again!
    Eileen

  • Preview pictures not displaying after BTV+ Update

    My BT Vision + box got its update last week and it seemed fine for a few days but it has now started to do something really annoying.  When I go to browse On Demand content the preview pictures remain blank, I can move to them and see what they are by the text name and select and play them all, but no pictures.  Any ideas how to fix this?  It's not a connectiuon issue as all the On Demand content works fine if selected and all other internet in the house is great.  Any ideas anyone?

    Hi morrison1976,
    Thanks for posting back.
    Sorry you're still having this problem and that restarting the box didn't permanently fix the issue.  Send me your details and I'll give you a hand from here.  Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
    All the best,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Hyperlinks Not Function After Being Published

    Hello,
    I've recently switched over to iWeb 08 and really dig all the new functions. I am running into one spot of trouble and hope that someone might shed some light on it for me.
    I've got a few images that I use as hyperlinks rather than text. The hyperlinks are fully functional while in iWeb and everything is fine in the inspector window, yet when I publish the site, the links are no longer operational. Some of the text links have now decided to stop working as well.
    The non-functioning thumbnail links are at:
    http://www.lolabydesign.com/LolaByDesign/Bead_Gallery.html
    The non-functioning text links are at:
    http://www.lolabydesign.com/LolaByDesign/Shop_Instructions.html
    I publish to my desktop, then use Fetch to upload the files to my host at netrfirms.
    This seems kind of random as other links on the site work fine, and I have never run into this problem before.
    Anyone have a quick fix for this one? As the images are thumbnails which point towards the full-size image, using text is not an option in this case.
    Thanks in advance!
    ~Lola

    Hi,
    there's this shapeimage
    http://www.lolabydesign.com/LolaByDesign/ShopInstructions_files/shapeimage4.png
    in front of the links, thus they do not work.
    If you can send that to back (select, ctrlclicksend back)
    Regards,
    Cédric

  • Probelms previewing SWF into file on startup of site after being published to "deploy to web" folder.

    I am having problems previewing a "swf" intro file (created in Flash, and saved as an Actionsrcript 3 "swf" file) after the site is published to the "deploy to web". When I open the "Maiin.html" in a browser, the "swf" intro does not play as it did on a browswer from within Flash Catalyst. What can I do to get the "swf" inrto to play on startup of the site?
    Caveat: When I initially published the site, I also chose the "publish to AIR option", but recieved an error message to check the code in the code space of Flash Catalyst in the "problems area" at the bottom of that menu. I did check, and there were no problems in the bottom area. Could this be part of the problem why the "swf" intro will not preview in a browser after being published to "deploy to web"?

    > www.melodiousthought.com/mtdesign/
    Same issue as the other thread you barged in on.
    this:
    <script src="../../../Scripts/AC_RunActiveContent.js
    is in a page in the second level of the site.
    there is NO WAY to go three folder levels up from
    http://www.melodiousthought.com/mtdesign/
    Define the local and remote site folders to the correct
    level.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Will Not Copy After Being Idle

    THIS IS A COPYING ISSUE!!!  After installing the upgraded version of Comcast's latest modem/router, our HP 6550 would not print.  I contacted Comcast and reported the difficulty and they informed me it was a printer problem - not their new modem.  Consequently, we purchased a new HP 5740 printer  The printing function worked fine and it would copy immediatley after the printer was turned on, however, after the printer sat idle for a couple of hours, the copy function would not work.  If you then turned the printer off and immediately turned it back on, it would copy.  Again, Comcast reiterated it was a printer problem.   I returned the original 5740 back to the store from which it was purchased and exchanged it for another HP 5740 printer.  After hooking up the second HP 5740, the same problems with copying occurred.  I returned the second HP 5740 to the dealer for a refund and left town for three months.  We recently returned and purchased a HP ENVY 7645 printer from another dealer.  We are having the same issues with this printer as we had with the two previous HP 5740 printers.  I discussed the situation with a level II supervisor at Comcast and he arranged for a new modem/router to be brought to the house and installed by a technician.  The installation occurred today and we are still experiencing exactly the same problem.  The Comcast technician who installed the new modem/router (who couldn't wait around while the printer sat idle) said that if the problems occurs after the installation, we should purchase a printer/copier from another manufacturer - or turn our printer "off and then on" when we want to copy.   He also asid that if this problem does continue after the new modem/router is installed, it definitely won't be a Comcast problem.  DOES ANYONE HAVE ANY IDEA WHERE I SHOULD GO FROM HERE?

    Hi @lamoso,
    Welcome to the HP Forums!
    I understand that your HP Envy 7645 will not copy after being idle. I am happy to look into this for you!
    I believe this is happening due to the printer going into sleep mode. As the options are for 5 minutes, 10 minutes, and 15 minutes for sleep mode to activate. I would recommend trying a hard reset, by going to this post,How to perform a Hard Reset, by @Rich1. It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. See this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would then make sure the printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates.
    Let's see what happens after giving these two steps a try!
    Thank you for posting!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.”
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Preview does not display pdf properly

    I have OS X 10.5.8 and Preview 4.2. Preview will not display a bank statement properly. Most of the content is missing. I initially thought this was the bank's fault, but the pdf statement displays OK on my work Mac using Adobe Acrobat Professional. On Preview, howerver, at work (OS X 10.4) it also does not display properly.
    Can anyone suggest a fix, or does Apple read these discussions...? Thanks. Graham

    "Preview is meant for previewing PDFs generated by OSX applications for printing.
    OSX uses its own code to generate and display PDFs, not Adobe's code.
    Adobe has been adding features to its PDF code that is used by some non-Apple software.
    PDFs generated by such software may not display correctly with Preview, but will work with the latest Adobe Reader."
    (courtesy of Malcolm Rayfield in this thread https://discussions.apple.com/message/12739728#12739728 )
    So, download and install the latest free Adobe Reader on your home Mac for these statements.
    Stefan

  • Annotated PDF from Preview will not display annotations in iPad mail

    I have an Annotated PDF from Preview will not display annotations in iPad mail, yet, it will display them on my Macbook Air. I confirmed this with another iPad user. Same results. Any ideas.

    I had the same issue. iAnnotate PDF will display your annotations made in preview and allow you to annotate on the iPad. It is a great app, I and quite happy with it.

  • Oem web page will not display after O/S dst patch

    Hello,
    The Grid web page will not display after we DST patch for the o/s.
    All below start fine without any errors:
    emctl start oms
    emctl start iasconsole
    opmnctl startall
    emctl start agent
    The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
    What logs should I be looking at to figure why the web page is not displaying? Thank you.

    Provide the output of these comands:
    $OMS_HOME/bin/emctl status oms
    $OMS_HOME/opmn/bin/opmnctl status
    $AGENT_HOME/bin/emctl status agent
    $DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
    SELECT STATUS FROM V$INSTANCE;
    EOF
    $DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
    Regards

  • My iBook will not display after Power up Chime

    Please I need Help.
    My iBook (16VRAM) Does not display after the power up chime. so i have tried to reset the PRAM by holding down CMD, OPTION, P & R after the chime, But Nothing Happens, I dont hear a second chime (I dnt Knw how long am suppose to hold down the keys, But i held it for 2 mins and still nothing)
    Please help.
    Thanks.

    Welcome to Apple Discussions Aaron
    Force quit in the middle of an installation spells "trouble". Try starting the computer in Safe Mode. If successful, restart the computer and see if it fully boots. If not, you more than likely have directory damage that needs to be repaired. Disk Utility may be up to the task.
    Post back

  • Pages not displaying properly in Publisher instances as we activated the page from Author

    HI All,
    Pages not displaying properly in Publisher instances as we activated the page from Author. In author it is working well but in Pulisher it is showing first 2 lines of the page and then showing error as
    Apache sling/2.2 Hot Spot ****** Sun OS error
    Please help me on this.IS this issue with the templates or components are we using?

    Ok, then let's go the long way and try to reduce the number of possible root causes:
    1) Is your problem reproducible on this publish? (I suppose it is)
    2) Is it reproducible on other publishs as well, which have received the same page with the same application?
    3) Can you reproduce it on other replicated pages as well?
    4) When you upload a page to such an affected publish via a content package, does this page render correctly?
    5) Does this problem appear on other environments as well?
    6) Do you use dispatcher when you get this result? Or do you get it when you request the page directly of CQ5?
    7) What's the HTTP statuscode when you render this page? You can see it in the request.log of CQ5.
    If you change logging via Felix Console, you don't need to restart the instance.
    kind regards,
    Jörg

  • Illustrator CC 18.1.1 print preview is not displaying preview properly. Any work around?!

    I only started having this problem recently. It might be a Yosemite bug or graphics driver bug. When I go to print in the latest version of Illustrator CC 18.1.1 I get a shrunken window of what print preview should be (see below).
    Circumstances are that I have my MBP 15" Retina connected to a Apple Thunderbolt Display. When I'm working in Illustrator on the Thunderbolt display and have the laptop screen open beside it, print preview will not display correctly. If I drag the print dialog box over to the laptop screen, it then shows print preview correctly. Also, I found that if I close the laptop screen and just work off the Thunderbolt display print preview works correctly again. ITS DRIVING ME CRAZY! Please Help!
    I'm currently running:
    OS X 10.10.2
    MacBook Pro (Retina, 15-inch, Early 2013)
    2.8 GHz Intel Core i7
    Memory 16 GB 1600 MHz DDR3
    Graphics NVIDIA GeForce GT 650M 1024 MB
    Screenshot from Thunderbolt Display. Print Preview is shrunk to upper-left hand corner:
    Screenshot from laptop screen when I brought the print dialog window over to it. The print preview corrected itself:

    Thanks pipinngpete.  You helped me understand what was going on.  Here is my post:
    Illustrator print preview is not displaying the preview properly. Any clue as to why?
    Rob

  • Photosmart 2610 all-in-one Scan preview does not display

    Recovering from a hard-disk crash, I've just reinstalled my Photosmart 2610 all-in-one using the driver and software package for Windows XP : rub_W01_Americas_Euro1_NB.exe. downloaded from the HP support site. All seems to be running well, except for a glitch when I try to scan: the document Preview does not display.  I have made certain that the Preview checkbox is duly selected, but nothing seems to help. It is the same whether I'm scanning a picture or a document. It also makes no difference whether I launch the scan from HP Director or from within another application.
    Note that if I click Accept, the document (or picture) will indeed be scanned and saved. But I won't see it until I open it with some other application.
    Thoughts, anybody?
    Thanks!
    James

    Hello James, welcome to the forums
    I understand you are unable to see your scanned preview with your Photosmart 2610. I would suggest the guide below to use for troubleshooting steps for this issue.
    Scanning Stops at the Preview Screen when the Printer is Connected to the Computer with a USB Cable ...
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Have a great day
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for