B1i SN: Send Email on Technical Error

Hi experts,
is it possible to send an Email if an technical erro occurs?
Especially for inbound errors!
In my Sceanrios there are often File Inbound Erros because of wrong tags and so on. Therefore it would be nice to get informed if something fails.
Any ideas?
Regards
Sebastian

Hi Sebastian,
in B1if you can define a customized error handling for your scenario package.
Please select your deactivated package via Scenarios -> Package design, and click Definitions button.
In the drop down-list, select Error Handling.
In the opening window, please click the Info button to see at which places a customized error handling can be implemented in general.
As prerequisite for such a customized error handling an special "error scenario step" needs to be implemented first, otherwise you cannot select another than "default error handling".
Best regards
Bastian

Similar Messages

OWA Email Prompt Before Sending Email With Spelling Errors

Looking for a way to configure OWA so that it does not send, or at least prompts you before sending, an email that has spelling errors?
Thanks

Hi FaeB,
Thank you for your question.
Exchange 2013 OWA didn’t just receive email without any development.
When we send email with spelling error, OWA will display the red line under incorrect word, as the following snapshot：
In snapshot, I make the word of “email” and “error” incorrect. If we didn’t modify it, OWA will not give another reminder when we send emails.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

After upgrade to 10.10, can't send email (SMTP cert. error). On previous version running on another machine, can still send find. This new version is missing the "Usual Ports" checkbox option. Can someone please help?

I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message:
The certificate for this server is invalid.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
But on another machine running Mavericks, I can still continue to send email. The same is try from my iPhone 5S.
On that machine running Mavericks the SMTP is configured as SSL and for "Usual Ports" (25, 465, 587) but THIS OPTION IS MISSING ON THE NEW VERSION. On the new version I have tried configuring the port to 25 and then 465 and 587 with no success. I have used the Network Utility to see if my provider is blocking me -- it is not. I have no third-party software on this machine (anti virus). I can receive email fine. On the new Yosemitie Mail there are new checkbox options of Automatically check my settings and Allow unsecure connections. I tried to uncheck SSL for SMTP but then it says it cannot send securely my passowrd and i need to check the option "Allow to send unsecurely". I did that but the same error message keeps appearing. So I have tried nearly everything I have been able to, all to no avail. Please can somebody help?

Thanks for your reply. Yes, it is a POP account. Incoming mail is fine. My port for incoming is also 110. But the outgoing port should be 587 (or 24, 465 and 587 as on Mavericks' "Usual Ports" option). I am using the same configuration across three different devices and only the machine running Yosemite is having issues. I notice in the new version of Mail there is no longer the "Usual Ports" option. I am not sure this is the culprit or not. But the fact is no matter how I configure it, it will not send mail for these particular servers. I have multiple clients and only one is affected, meaning I can send email from other email addresses (different hosting contracts) on Yosemite but on this one particular one I cannot.

Sending email on wifi errors

On both my ipad 3 and iPhone 5 sometimes I can't send emails on wifi, I'll get "cannot connect to server" however if I switch wifi off and use LTE it works fine.. Switch back to wifi and it errors...
Using exchange and iCloud.
Anyone else?

Which email service and type (POP, IMAP, Exchange)?

SSIS 2008 R2 - Send email task with error in body message?

Hi there, I'm newbie to SSIS.
In Control Flow, I've Execute SQL task -> Data Flow Task (wirh some CSV export from SQL task)-> Send email on failure as shown in below screenshot. How can I get FOR ANY error message in
Email Body inside "Send Mail Task- Failure" in case of failure?
I found few articles on the internet but I'm newbie to SSIS and I need some step-by-setp guildeline to do this. Any idea? Many Thanks.

Hi KM IT,
You can enable logging for the package, and redirect the error message to a text file, and then display the content of the text file in the email message body.
When configuring the logging, you can enable the logging for the entire package or each Control Flow Task. For the step-by-step guidance, please see:
http://learnsqlwithbru.com/2009/11/26/configure-logging-in-ssis-packages/
Then, in the Send Mail Task, you can configure the "MessageSourceType" property to “File Connection”, and select the log file. Of course, you can attach the log file as an attachment of the email.
If you have any questions, please feel free to ask.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

I just updated my IPad to iOS 5 and now can not send email. The error message says the server rejects the address which is not true Asti sends on my desktop.

I just updated my iPad to iOS 5 and now can't send email- I have tried the obvious but no luck. Any suggestions?

Usually 'authentication required' means that you need to submit a username (or e-mail address) and password to the e-mail server, when sending a message. This logic is not different between Outlook and Thunderbird, and even with the latest and previous version of Thunderbird.
Of course you can try the previous version again to see if it solves the problem, although you'll be less secure because you would be missing the latest fixes.
If you'd be willing to get back to Thunderbird, say if your frustration level with your new app would increase too much, please see our article [https://support.mozilla.org/en-US/kb/cannot-send-messages cannot send messages] for further help.
In all other cases I'd appreciate it if you could mark this as answer so we know you don't need further help.

When trying to send email, I get error message, rejected by server

Our companies webhosting and email are through Bluehost. I have set up email on my iPhone and it receives email just fine, but when i try to send I get "recipient rejected by server" error. How can I fix this. i have tried everything i know to do.

most of the time the problem is the settings of the out going server of your email account. Call your internet provideer and ask them for the right settings, or do a research on google for those

Email validation technical error

I am unable to validate the MyBT account, when I get emailed out the validation link it seems to be missing something, https://www.bt.com/customeraccount/yourprofile/secure/consumer/validateemaillink.do?security_code= ,
and just results in an error, can't get onto my bills and payments because of this.. it's been like this for about a week now, any ideas?

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact live chat at this link they should be able to help you
http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Send emails when workflow error arrives

Hello, I know that it is possible to have an e-mail sent to a useru2019s outlook inbox when they receive a workflow error but I am not sure how I should configure this. (This would be for more than 1 person for an individual workflow error, assigned GUID to the related position).
Any assistance would be really appreciated.
Thanks!
Andrea

Just an entry in SU01, cannot not solve your problem neither it can an email. What type of error messages are you getting in the user's inbox? First of all, why they are getting these error messages as WI in their inbox? Is it WI or just a message? To push WI to the outlook, scehdule the report RSWUWFML2 and if it is SRM, RBBP_NOTIFICATION_OFFAPP. SAP cannot simply create an email for the WI received in the user's inbox. You need to do customization in the required WF.
Regards, IA

ODI send email with latest error file attachment

We have kick-out/error file with the format *err.txt. Whenever error occurs the same gets overwritten by the latest file. We are attaching this error file on the completion of the job. If error file generates, everything is fine. But, on the successful run, I mean when there are no error file generation, it attaches the previous run error file.
Anyone of you help me how to handle this situation. Is there any way to validate the file generation date before attaching the file.
Thanks in advance
Edited by: user12958295 on Oct 30, 2012 7:42 AM

Hi,
Thanks for the response.
As of now we are following that as a workaround. However our client wants to avoid the manual work of delete/move/renaming the error file.
Is it possible to check the file generated date with sysdate for attaching the error file by odisendmail.
Thanks!
BRM

Try to send email on my iphone 4s. I get email error: "Recipient was rejected buy server". How do I correct?

I have a iphone 4S. When I try to send email I get error message:"recipient rejected by server". How do I correct

Enter your user ID and pasword for the OUTGOING mail server as well as the incoming mail server.

Sending email using SMTP and Java

Hi guys
I am using the following code to send an email:
private void sendEmail(String mDate, String time) {
 Date date = new Date();
 DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.FULL, Locale.ENGLISH);
 // Open port to server
 try {
 smtpSocket = new Socket(SMTP_SERVER, SMTP_PORT);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 // Connection was made. Socket is ready for use.
 if(smtpSocket != null && os != null && is != null) {
 try {
 // email header
 os.writeBytes("HELO\r\n");
 // set the reply email address
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // give the address of the people that we want the email sent to
 for(int i=0; i<RECIPIENTS.length; i++) {
 os.writeBytes("RCPT To: <" + RECIPIENTS[i] + ">\r\n");
 System.out.println(RECIPIENTS);
// data header
os.writeBytes("DATA\r\n");
os.writeBytes("X-Mailer: Via Java\r\n");
os.writeBytes("DATE: " + dateFormat.format(date) + "\r\n");
os.writeBytes("From: Characterisation System Update\r\n");
os.writeBytes("Mime-Version: 1.0\r\n");
os.writeBytes("Content-Type: text/html; charset=\"ISO-8859-1\"\r\n");
//os.writeBytes("Content-Transfer-Encoding: 7bit;\r\n");
for(int i=0; i<RECIPIENTS.length; i++) {
os.writeBytes("To: <" + RECIPIENTS[i] + ">\r\n");
// get the details of the test and enter them into the message body
String message = "<HTML><BODY>" +
"\r\nThe following System has not received a data packet for at leat 1 hour:" +
"\r\n System: " + rackName +
"\r\n Time Last Pkt. Received: " + time +
"\r\n Date Last Pkt. Received: " + mDate +
"\r\n Job Number: " + jobNoDispLabel.getText() +
"\r\n Device: " + deviceDispLabel.getText() +
"\r\n Run Number: " + runNoDispLabel.getText() +
"\r\n Current Temperature: " + tempDispLabel.getText() +
"\r\n Current Module: " + moduleDispLabel.getText() +
"\r\n Current Test: " + testingDispLabel.getText() +
"\r\n This does not gurantee that the system has crashed!" +
"\r\n</BODY></HTML>";
os.writeBytes("Subject: " + rackName + " Packet Warning\r\n");
os.writeBytes(message + "\r\n");
os.writeBytes("\r\n.\r\n");
os.writeBytes("QUIT\r\n");
// Now send the email off and check the server reply.
// Was an OK is reached you are complete.
String responseline;
//DataInputStream d = new DataInputStream(is);
BufferedReader reader = new BufferedReader(new InputStreamReader(is));
while((responseline = reader.readLine())!= null) {
if(responseline.indexOf("Ok") != -1) {
break;
} catch(Exception e) {
System.out.println("Cannot send email as an error occurred.");
e.printStackTrace();
catch(Exception e) {
System.out.println("Host " + SMTP_SERVER + "unknown");
e.printStackTrace();
} finally {
// close all of the data streams
try {
if(!smtpSocket.isClosed()) {
smtpSocket.close();
smtpSocket = null;
} catch(Exception e) {
e.printStackTrace();
try {
if(os != null) {
os.close();
os = null;
} catch(Exception e) {
e.printStackTrace();
try {
if(is != null) {
is.close();
is = null;
} catch(Exception e) {
e.printStackTrace();
i have used an example on the web to help me do this, so it may look familiar!!
It works fine when i run the program in debug mode but doesn't work when i run the jar file, i was wondering if anyone could help me understand why? or give me a clue as to where to look as i have had the strange realisation that i rarely compile my code up to be used by other people!!
sad but true! Also apologies if i haven't posted adequate information, this is the first time i have posted on the forum asking for help!
Anyway help would be most appreciated and thanks in advance

Sorry, by debug mode i mean running it using netbeans 5.5 and clicking on the "run main project" icon.
Once i have cleaned and built the main project all of the files are put into the jar file. Once i have done that i double click on the jar icon
is that ok? there doesn't seem to be any errors

Sending Email using java code

I am using the following code to send an email from my java servlet but the problem is, when it is on its own it works fine but as soon as I combine it with some code to submit data into a postgres database it sometimes does not perform could it be because im missing some close statements??
//grades to submit grades starts here
 String [] paramValues = req.getParameterValues("Mark");
 for(int i=0; i<paramValues.length;i++)
 String [] paramValues2 = req.getParameterValues("StudentExamNumber");
 String Mark = paramValues;
 String ExamNo = paramValues2[i];
 //testing purposes
 out.println("<tr><td>"+ExamNo+"</td>");
 out.println("<td>"+Mark+"</td>");
 try
 st = conn.createStatement();
 query = "SELECT StudentNo FROM STUDENTS"+WebCourse2+ " where ExamNo='"+ExamNo+"'";
 rs = st.executeQuery(query);
 if(rs !=null)
 while(rs.next())
 String StudentNo=rs.getString("StudentNo");
 //testing purposes
 //out.println("<td>"+StudentNo+"</td></tr>");
 here
 st4 = conn.createStatement();
 query4 = "select MAX(entryno) from STUDENTRESULTSFORCOURSE"+WebCourse2+" WHERE STUDENTNO='"+StudentNo+"'";
 rs4 = st4.executeQuery(query4);
 if(rs4 !=null)
 while(rs4.next())
 EntryNo = rs4.getInt(1);
 }//end rs4 while
 rs4.close();
 }//end rs4 if
 out.println("<tr><td>EntryNo= "+EntryNo+"</td>");
 EntryNo = EntryNo + 1;
 out.println("<td>NewEntryNo= "+EntryNo+"</td></tr>");
 //Submitting grades to database/
 st3 = conn.createStatement();
 insert = "insert into STUDENTRESULTSFORCOURSE"+WebCourse2+" (StudentNo, CourseCode, AttemptNo, ExamMark, EntryNo, EnteredBy) values ('"+StudentNo+"', '"+WebCourse2+"', 1,'"+Mark+"',"+EntryNo+",'"+WebUsername2+"')";
 st3.executeUpdate(insert);
 }//end rs while
 rs.close();
 }//end rs if
 }//end try
 catch (SQLException e)
 System.out.println("Error: "+e.getMessage());
 }//end for loop
 //code to submit grades ends here
 //code used to send email starts here
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 // Connection was made. Socket is ready for use.
 System.out.println("Connection was made. Socket is ready for use.");
 try
 // The email address that the server
 // you are using know user as.
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <[email protected]>\r\n");
 //send a CC to:
 os.writeBytes("RCPT Cc: <[email protected]>\r\n");
 // add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 os.writeBytes("From: "+WebUsername2+"<[email protected]>\r\n");
 os.writeBytes("To: Marie <[email protected]>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: ProfCuthbert <[email protected]>\r\n");
 String sMessage = "ELECTRONIC ENGINEERING EXAM COLLATION SYSTEM EMAIL\n\nThe results for the following course have been submitted by the following member of staff\n\nCOURSE: "+WebCourse2+"\n\nSUBMITTED BY: "+WebUsername2+" \n\nPLEASE LOCK COURSE NOW IN ORDER TO PREVENT ANY FURTHER SUBMISSIONS TO BE MADE BY USERS.";
 os.writeBytes("Subject: A SUBMISSION HAS BEEN MADE FOR COURSE "+WebCourse2+"\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Once an OK is reached you are complete.
 String responseline;
 //for testing purposes
 //out.println(responseline = is.readLine());
 while((responseline = is.readLine())!=null)
 //for testing purposes
 //out.println("responseline= "+responseline+" ");
 //out.println("responseline.indexOf(Ok)= "+responseline.indexOf("Ok"));
 if(responseline.indexOf("Ok") != -1)
 break;
 if(responseline.indexOf("Ok") == -1)
 confirm=1;
 if (confirm==1)
 out.println(" the marks have been submitted thank you");
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
Does anyone know what the problem is??
thanks
tzaf

i close them later in the program. Ive made sure they are all closed I have a feeling that it could be coming from here....
//code used to send email starts here
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 // Connection was made. Socket is ready for use.
 System.out.println("Connection was made. Socket is ready for use.");
 try
 // The email address that the server
 // you are using know user as.
 os.writeBytes("MAIL From: <email address>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <email address>\r\n");
 //send a CC to:
 os.writeBytes("RCPT Cc: <email address>\r\n");
 // add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 os.writeBytes("From: "+WebUsername2+"<email address>\r\n");
 os.writeBytes("To: hello<email address>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: hello <email address>\r\n");
 String sMessage = "ELECTRONIC ENGINEERING EXAM COLLATION SYSTEM EMAIL\n\nThe results for the following course have been submitted by the following member of staff\n\nCOURSE: "+WebCourse2+"\n\nSUBMITTED BY: "+WebUsername2+" \n\nPLEASE LOCK COURSE NOW IN ORDER TO PREVENT ANY FURTHER SUBMISSIONS TO BE MADE BY USERS.";
 os.writeBytes("Subject: A SUBMISSION HAS BEEN MADE FOR COURSE "+WebCourse2+"\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Once an OK is reached you are complete.
 String responseline;
 //for testing purposes
 //out.println(responseline = is.readLine());
 while((responseline = is.readLine())!=null)
 //for testing purposes
 //out.println("responseline= "+responseline+" ");
 //out.println("responseline.indexOf(Ok)= "+responseline.indexOf("Ok"));
 if(responseline.indexOf("Ok") != -1)
 break;
 if(responseline.indexOf("Ok") == -1)
 confirm=1;
 if (confirm==1)
 out.println(" the marks have been submitted thank you");
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
 //code used to send email ends here
do i need to close is and os?
thanks
tzaf

Sending email using java

Im using this code to do this, but i have a feeling that I need to close os and is is that the case? do i need to close anything else?
thanks
tzaf
//code used to send email starts here
 String m_sHostName="localhost";
 int m_iPort=25;
 try
 // Open port to server
 smtpSocket = new Socket(m_sHostName, m_iPort);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 if(smtpSocket != null && os != null && is != null)
 // Connection was made. Socket is ready for use.
 System.out.println("Connection was made. Socket is ready for use.");
 try
 // The email address that the server
 // you are using know user as.
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // Who the email is going to.
 os.writeBytes("RCPT To: <[email protected]>\r\n");
 //send a CC to:
 os.writeBytes("RCPT Cc: <[email protected]>\r\n");
 // add the message and the
 // header of the email to be sent out.
 os.writeBytes("DATA\r\n");
 os.writeBytes("X-Mailer: Via Java\r\n");
 os.writeBytes("From: "+WebUsername2+"<[email protected]>\r\n");
 os.writeBytes("To: Marie <[email protected]>\r\n");
 //Again if you want to send a CC then add this.
 os.writeBytes("Cc: ProfCuthbert <[email protected]>\r\n");
 String sMessage = "ELECTRONIC ENGINEERING EXAM COLLATION SYSTEM EMAIL\n\nThe results for the following course have been submitted by the following member of staff\n\nCOURSE: "+WebCourse2+"\n\nSUBMITTED BY: "+WebUsername2+" \n\nPLEASE LOCK COURSE NOW IN ORDER TO PREVENT ANY FURTHER SUBMISSIONS TO BE MADE BY USERS.";
 os.writeBytes("Subject: A SUBMISSION HAS BEEN MADE FOR COURSE "+WebCourse2+"\r\n");
 os.writeBytes(sMessage + "\r\n");
 os.writeBytes("\r\n.\r\n");
 os.writeBytes("QUIT\r\n");
 // Now send the email off and check the server reply.
 // Once an OK is reached you are complete.
 String responseline;
 //for testing purposes
 //out.println(responseline = is.readLine());
 while((responseline = is.readLine())!=null)
 //for testing purposes
 //out.println("responseline= "+responseline+" ");
 //out.println("responseline.indexOf(Ok)= "+responseline.indexOf("Ok"));
 if(responseline.indexOf("Ok") != -1)
 break;
 if(responseline.indexOf("Ok") == -1)
 confirm=1;
 if (confirm==1)
 out.println(" the marks have been submitted thank you");
 catch(Exception e)
 { System.out.println("Cannot send email as an error occurred.");
 out.println("Cannot send email as an error occurred.");
 catch(Exception e)
 { System.out.println("Host " + m_sHostName + "unknown"); }
 //code used to send email ends here

any thoughts?
thanks
tzaf

Problem sending email

I fail to send email with the error message "This message could not be delivered and will remain in your Outbox until it can be delivered. Sending the message content to the server failed." No problem in receiving emails and the Connection Doctor tool indicates no problem in connecting to the internet. Any help will be appreciated.

There's a myriad of possibilities here. If the connection doctor checks out, and you're able to send other emails then there's something about this particular email that's causing the problem - it could be some kind of spam filter running on the server that is rejecting the message because of the recipient address, the content of the message, an attachment, etc.

B1i SN: Send Email on Technical Error

Similar Messages

Maybe you are looking for