B210a/Vista WiFi Communication Problem

Computer (Dell) not talking to printer Thru network properties traced problem to printer port CN08 not responding. Tried "reconfigure" button, got error message 0.00000003 "operation could not be completed" Tried to cancel port to then re-install, got the same error msg. Is this a computer problem, a Vista problem or a printer problem? What should I do? Thanks.

Hi Rete,
I couldn't say off the top of my head what the root cause of the issue is, but I am certainly happy to help you find out and with any luck actually fix the issue.
The HP Print and Scan Doctor was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please download and run the utility and let me know if this fixes the problem or gives you an error of any kind that can help point us in the right direction.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Communication problem between NetBeans and Tomcat

hi!
i got a quite mysterious problem. here is what happens:
- i start NetBeans 5.5.1 (the first time)
- i want to debug my JSF-Project, the Debugger starts
- After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
- Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
okay.
when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
But the story goes on:
When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
thanks,
flo.
some system-info:
- windows vista business 32-bit
- no firewall is running
- AntiVir Personal Edition IS running
- Yahoo Widgets Engine IS running
- no other software is running
and finally the tomcat-log:
Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
Listening for transport dt_shmem at address: tomcat_shared_memory_id
21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 1862 ms
21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
21.09.2007 18:27:54 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/31 config=null
21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3626 ms

As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
I hope this help you

Error getting license. license server communication problem: e_adept_document_type_unknown

I began this day with ADE 17.2 and tried every proffered solution to no avail. The last suggestion was to update to ADE 3.0.
The exact error message is:
Unable to download. error getting license. license server communication problem: e_adept_document_type_unknown
I have tried completely disabling the firewall (domain, public, private) and the problem persists. I have tried running ADE as system admin with same results.
I've read all the posts on this forum and it appears no one has found a solution.
Please note: I do not have a proxy, currently all firewalls disabled, no anti-virus software used.
Windows 7 SP 1 32 bit home premium
Firefox 27.0.1
Shockwave flash 12.0.0.70
Network connection is wifi home network
Content to be downloaded is PDF from Google Play Books
Is there anyone who can offer a solution ....
UPDATE:
My husband figured out how to disable the firewall on the router and we tested again (and simultaneiously with software firewall disabled). Still didn't work.
I also created a Firewall Rule specifically for this application:
GENERAL
Name: Adobe Digital Editions 3.0
[x] Enabled
Action: Allow the connection
PROGRAMS AND SERVICES
This program: [local path to]\DigitalEditions.exe
Services: apply to all programs and services
COMPUTERS
[nothing selected]
PROTOCOLS AND PORTS
Protocol type: any
local port: all
remote port: all
ICMP: [default]
SCOPE
local IP: any
remote IP: any
ADVANCED
Profiles: domain, public, private
interface types: [default]
Edge traversal: defer to application
USERS
[defaults]
Authorized: [nothing entered]
Exceptions: [nothing entered]
UPDATE:
I was reading other posts on similar topics and one of the suggestions was to try OverDrive. Since I already have it, I tried it and received the following error message:
The specified OverDrive media file "[local path]\AppData\Local\Temp\Seams-Unlikely-epub-2.acsm" is not valid. (The OverDrive media file root element is not valid.)
According to OverDrive's help forum that means the ACSM file can ONLY be downloaded with ADE!
http://help.overdrive.com/article/0644/What-to-do-if-you-get-an-ACSM-The-OverDrive-media-f ile-root-element-is-not-valid-error-when-using-OverDrive-Media-Console-for-Windows-or-Mac
UPDATE
Have learned we have a WNDR4500 router with built-in firewall which can not be disabled. On the NetGear forums, there was the uninformative suggestion to "use DMZ in the router settings" to disable the firewall. In looking at the settings for our firewall, the nearest screen I could find to resemble that suggestion contained the following:
[ ] Disable Port Scan and DoS Protection
[ ] Default DMZ Server [192.168.1.0]
[ ] Respond to Ping on Internet Port
[x] Disable IGMP Proxying
MTU Size(in bytes) 1500 bytes
NAT Filtering [x] secured [ ] open
[ ] Disable SIP ALG
I'm afraid this is beyond the scope of my understanding and have no idea what I should be doing here so have made no changes.

Adobe Digital Editions Communications Error When Downloading PDF from Overdrive (and maybe elsewhere too):
If you get an “error getting license server communication problem” message in Adobe Digital Editions:
1. Try downloading any of the PDF files from Adobe here: http://www.adobe.com/products/digital-editions/eBook.html
2. Now re-download the book from Overdrive
3. Enjoy!!
I figured this out after many, many hours of frustration . . hope it helps!!

"Error Getting Licence. License Server Communication Problem. E_ADEPT_DOCUMENT_OPEN_ERROR

After a fatal HDD crash and rebuild, my ADE was working fine but now it's not. I purchased a book from Google, it starts to download to ADE then I get the ADE message "Error Getting License. License Server Communication Problem. E_ADEPT_DOCUMENT_OPEN_ERROR. Can anyone help? I've re-booted and re-authorized with no success. My wife is all over me to get this fixed so she can read the book. Thanks.
FYI: ADE 4.0.3 Windows 7x64

I was unable to download the book so I couldn't open it. However, I've been doing some experimenting and have finally got the book downloaded to ADE with some challenges. Here's what happened.
Prior to my HDD crash my Digial Editions library was on C:drive. When I restored my lost data it put it back on the C:drive. I copied it with all my other data to the new My Document on F:drive, pointed my existing My Documents to the F:drive.and re-installed ADE. It worked but VERY VERY slow loading. (4 minutes and not the only program to slow down. I checked drive share and everything should work well but it doesn't). Fine, I then pointed My Documents back to the C:drive and the original ADE library. Voila! It loads right away like it used to but now I get the open document error. This morning I redirected My Documents back to the F:drive which is where it was when I set up ADE. It again took many minutes to load but then allowed me to download the book.
So I guess the real questions is this: How can I move my ADE 4.0.3 library from the F:drive back to the C:drive without getting this kind of error? In absence of any better suggestion I'm going to uninstall ADE, point My Documents back to the C:drive which contains the original restored ADE library and re-install ADE. Do you think that makes sense?
Thanks for your help.

WiFi connection problem with WRT120N

Hello,
I'm trying to configure the WiFi on a WRT120N (firmware 1.0.05), but I encountered several problems.
The Internet routing is OK => no problem to have a RJ45 connection.
But when I configured the WiFi, the problems begun...
1) With a laptop Dell XP SP3 (about 6 years old, and working fine with other WiFi networks b/g WPA/WPA2), I can see the SSID, but it is not possible to connect (without security, or with WEP, WPA or WPA2).
2) With 2 different desktops (XP SP3 and Vista SP1) and an USB adapter Linksys Wireless-G, I cannot see the SSID (but I can see other SSID in the neighbourhood).
3) With an Alienware, no problem, I can immediately connect and surf (with or without encryption).
Could you please help me to solve this problem ?
Thanks in advance.

Connect the computer to the router with the Ethernet cable.
Open the setup page of the router. Create a new wireless network.
Click on the wireless tab and set the configuration view to manual.
Keep the network mode on Mixed, change the SSID, standard channel to 11. Save the settings.
Click on wireless security sub tab. Change the security mode to WPA personal and enter the password for the wireless network. Save the settings.
Click on Wireless MAC filter sub tab and make sure that it is disabled.
Click on Advanced wireless settings sub tab. Change the beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
Now try to connect to the wireless network. See if that works.
if you are not able to see the SSID then try changing the wireless channel on the router.
If that doesn't work then re-flash the firmware on your router. Download the latest firmware from Linksys website and save it on your computer. open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and re-flash it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Communication Problem with the second battery

Hello,
In Lenovo Solution Center it says that there is communiction problem with the second battery. I already had this problem some months ago, back then it didn't charge the second battery. I got a new one and it worked again. Now it says the same thing "communication problem", but i can charge the battery and I also can't find any other sign of something not working. But still- it seems weird that the program tells me something is wrong. Can somebody help me?
Thanks Lina

Hi, Lina
What is the machine type and model of your computer? Also, what operating system are you running?
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Communication problem with proxy server

We have establish the configuration of an iPad to access the enterprise net, but when trying to access any webpage we get the next message: Safari can not open the page. Error:"There is a communication problem with proxy web server (HTTP)"
The access has no problems with other movile devices.
Ahy help?

Hi,
I am not sure whether you have already solved the problem or not....
Do the following to deploy MobileBIService.war file on tomcat
1.Stop Tomcat Web application server.
2.Copy the file, MobileBIService.war from [Install directory]\Mobile 14\Client to the Tomcat's "Webapps" directory.
In my case, I copied the MobileBIService.war from C:\Program Files (x86)\SAP BusinessObjects\Mobile14\Client to C:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps. ( I used BO 4.0 SP02)
3. Start Tomcat.
Restarting Tomcat would automatically deploy war file as a Web App
One folder u201CMobileBiServiceu201D will appear in webapps folder when MobileBIService.war is deployed successfully.
Hope it helps.
Regards,
Ankur

Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

COMMUNICATION PROBLEM WITH SCANNER TO COMPUTER OF DESKJET 3050 j610

WHEN i TRY TO SCAN USING MY DESKJET 3050 j610 A MESSAGE SHOWS 'COMMUNICATION PROBLEM NOT CONNECTED THEREFORE i AM NOT ABLE TO SCAN.
i HAVE BEEN TRYING TO RESOLVE THIS PROBLEM OVER 8 HOURS AND I' M GETTING SICK. I'VE TRIED EVERYTHING AVAILABLE ON THE SUPPORT PROGRAMS INCLUDING 'PAINT' AND NOTHING WORKS.
I NEED A ANSWER OR I;LL THROW THIS THING OUT

I have the same problem here, i have two PC's both running Windows 7 but only one works printing and scanning wirelessly.
On the PC running Windows 7 32bit wireless printing and scanning works great.
On the PC running windows 7 64bit only wireless printing works. Havent found a solution, but just a work around. Here it is......
1. Got to you printer and hit the Wireless button to find the IP address your router gave it.
2. Open up your Internet browser and input the IP address.
and...BAM!!! if it worked it should take you to the Deskjet 3050 All-in-One J610a Embedded Web Server page and from there you can scan with what looks like all the original options if the thing was working to begin with and save to your PC.

Communication Problem: E_ADEPT_REQUEST_EXPIRED

I keep getting this message :
Error getting License. License Server Communication Problem:
E_ADEPT_REQUEST_EXPIRED

The same problem. Origin is, I suppose, a changement of profile when I lost all my data and programs by a virus. Who can help us?

Communication problem

Hi, I think I have a communication problem between the servers in a cluster,
          I attached a picture of the administration console where it seems that one
          server in the cluster cant communicate with the other.
          (one server is running on Windows and the other on Linux)
          Any ideas to solve this problems?
          Thanks
          [console.jpg]


Using multicastTest I found that the messages that the windows machine
          produces are lost. Nobody receives that messages.
          I don't know what might be happening
          cheers
          "Campot" <[email protected]> escribió en el mensaje
          news:[email protected]..
          > Hi, I think I have a communication problem between the servers in a
          cluster,
          > I attached a picture of the administration console where it seems that one
          > server in the cluster cant communicate with the other.
          > (one server is running on Windows and the other on Linux)
          >
          > Any ideas to solve this problems?
          > Thanks
          >
          >
          >

Communication problem from the vpn-anyconnect to easy-vpn-remote

Hi Team,
I have a communication problem from the vpn-anyconnect to easy-vpn-remote, I´ll explain better bellow and see the attached
topology:
1) VPN Tunnel between HQ to Branch Office - That´s OK
2) VPN Tunnel between Client AnyConnect to HQ - That´s OK
The idea is that the Client Anyconnect is to reach the LAN at Branch Office, but did not reach.
The communication is stablished just when I start a session (icmp and/or rdp) from Branch Office to the Client AnyConnect,
in this way, the communication is OK, but just during a few minutes.
Could you help me?
Bellow the IOS version and configurations
ASA5505 Version 8.4(7)23 (headquarters)
ASA5505 Version 8.4(7)23 (Branch)
**************** Configuration Easy VPN Server (HQ) ****************
crypto dynamic-map DYNAMIC-MAP 5 set ikev1 transform-set ESP-AES-256-SHA
crypto map outside-link-2_map 1 ipsec-isakmp dynamic DYNAMIC-MAP
crypto map outside-link-2_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside-link-2_map interface outside-link-2
access-list ACL_EZVPN standard permit 10.0.0.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.1.0 255.255.255.0
access-list ACL_EZVPN standard permit 192.168.50.0 255.255.255.0
access-list ACL_EZVPN standard permit 10.10.0.0 255.255.255.0
group-policy EZVPN_GP internal
group-policy EZVPN_GP attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value ACL_EZVPN
nem enable
tunnel-group EZVPN_TG type remote-access
tunnel-group EZVPN_TG general-attributes
default-group-policy EZVPN_GP
tunnel-group EZVPN_TG ipsec-attributes
ikev1 pre-shared-key *****
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup
**************** Configuration VPN AnyConnect (HQ) ****************
webvpn
enable outside-link-2
default-idle-timeout 60
anyconnect-essentials
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
anyconnect profiles Remote_Connection_for_TS_Users disk0:/remote_connection_for_ts_users.xml
anyconnect enable
tunnel-group-list enable
access-list split-tunnel standard permit 192.168.1.0 255.255.255.0
access-list split-tunnel standard permit 192.168.15.0 255.255.255.0
access-list split-tunnel standard permit 10.0.0.0 255.255.255.0
group-policy clientgroup internal
group-policy clientgroup attributes
wins-server none
dns-server value 192.168.1.41
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
default-domain value ipconnection.com.br
webvpn
anyconnect keep-installer installed
anyconnect ssl rekey time 30
anyconnect ssl rekey method ssl
anyconnect profiles value Remote_Connection_for_TS_Users type user
anyconnect ask none default anyconnect
tunnel-group sslgroup type remote-access
tunnel-group sslgroup general-attributes
address-pool vpnpool
authentication-server-group DC03
default-group-policy clientgroup
tunnel-group sslgroup webvpn-attributes
group-alias IPConnection-vpn-anyconnect enable
object-group network Obj_VPN_anyconnect-local
network-object 192.168.1.0 255.255.255.0
network-object 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
network-object 192.168.50.0 255.255.255.0
object-group network NAT_EZVPN_Source
network-object 192.168.1.0 255.255.255.0
network-object 10.10.0.0 255.255.255.0
object-group network NAT_EZVPN_Destination
network-object 10.0.0.0 255.255.255.0
nat (inside,outside-link-2) source static Obj_VPN_anyconnect-local Obj_VPN_anyconnect-local destination static Obj-VPN-
anyconnect-remote Obj-VPN-anyconnect-remote no-proxy-arp route-lookup
nat (inside,outside-link-2) source static NAT_EZVPN_Source NAT_EZVPN_Source destination static NAT_EZVPN_Destination
NAT_EZVPN_Destination no-proxy-arp route-lookup
nat (outside-link-2,outside-link-2) source static Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote destination static
NAT_EZVPN_Destination NAT_EZVPN_Destination no-proxy-arp route-lookup

Hi,
the communication works when you send traffic from easyvpn branch side because it froms the IPSEC SA for local subnet and anyconnect HQ pool. The SA will only form when branch initiates the connection as this is dynamic peer connection to HQ ASA.
when there no SA between branch and HQ for this traffic, HQ ASA has no clue about where to send the traffic from anyconnect to branch network.
I hope it explains the cause.
Regards,
Abaji.

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

Communication problem, deskjet 920c

I received a note for a repair to a communications problem for my printer. When I tried to download it, I got to a "dot4 scrubber" which stalled everything. I had to reboot my computer to get rid of the note.

Hi robincom2,
Thank you for joining the HP Support forums. I understand that you received a message about a communications issue with your printer.
I have included a document with the trouble shooting steps you need to take to resolve the issue. I know that you weren't installing the printer when you received the error, but it's the trouble shooting steps that are important. Please follow the instructions for Steps one and two, as the software is already installed you shouldn't need to follow Step three.
Software Installation Stops Without Warning and With No Error Message
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

B210a/Vista WiFi Communication Problem

Similar Messages

Maybe you are looking for