B2b segment delimiter issue in 852 4010
Hi,
In 852 out bound i am facing an issue like I am not able to use the segment separator NAK (0x15) while writing the edi file.
Please advice me is there any bug with this delimiter.
Document name: 852
Document version : 4010
Hi Amar,
You opened this thread within the wrong community.
Please do open it in B2B Integration with SAP Process Orchestration
Kind regards,
Dimitri
Similar Messages
-
Segment delimiter causing error
Hi Guru's
We had setup an outbound 810 in b2b. The issue is when EDI file is generated( validations r off) and we look it through spec builder we get following error
The Interchange Trailer is missing. The segment itself may be missing or the Segment Delimiter may be missing.
Trailer was expected after:
Character: 503
The file generted is
ISA*00* *00* *01*0041158668 *01*103391843 *091013*1140*U*00401*000001340*0*P*>Â…GS*IN*041158668*103391843*20091013*1140*1340*X*004010Â…ST*810*1340Â…BIG*20090819*10034411*20090815*4680814246Â…ITD*05*3****20090908*20*****Net 20 DAYSÂ…IT1**170.44*LB*13.27**UP*007221084540Â…PID*F****HAYSTACK.QUESO DE MANO PC PP DPI#: 35639Â…SAC*A*ZZZZ***000*******02***Promotional AllowanceÂ…TDS*226170Â…SAC*A*ZZZZ***000**********Total AllowancesÂ…CTT*1Â…SE*10*1340Â…GE*1*1340Â…IEA*1*000001340Â…
we are using 0x85 as segment delimiter which is (...). Plz see the extra char that is coming. For all other trx we are using other segment delimiter and we are not facing any issue
Any pointers will be highly appreciated
Regards
SahilHi Sahil,
Did you try changing the segment delimiter value to any other value(or keep it default)? Please let us know the patch level of your B2B.
What is the value of below five in your document protocol -
Element delimiter,
Sub-element delimiter,
Segment Delimiter,
Replacement character and
Tag Delimiter
Regards,
Anuj -
EDIAssembler is missing to write segment delimiter on SE segment
We have a custom batching orchestration which batches incoming EDI transaction sets(BizTalk server 2010).
When sending out this batched message it will be assembled by the EDI Assembler on the send port. We noticed that on some of the SE segments the EDI assembler is not putting any segment delimiter and writing the next segment(ST or GE) and this is causing
issues in the down stream applications.
Example:-
SE*89*7025236ST*837*7025237*005010X223A2~
SE*87*0118GE*2*13~
Appreciate any help on this.
Let me know if any additional information is needed.Hi John, yes it is consistent.
We are using a custom batching because of our requirement to batch dynamically and not depend on the defined batches in party.
It is a simple aggregator of the disassembled xml files based on a specific grouping criteria. After this aggregation the aggregated message passes thru the send port with EDI assembler. -
Seeburger BIC mapper - CRLF as the segment delimiter
I am trying to configure an E2X AS2 scenario using Seeburger adapters but the sender AS2 channel is failing. I receive the error "Length limit exceeded - no SEG. delim. found!!!" during the BIC mapping step. The format of the message I am receiving from the vendor has no segment delimiters and the different segments are simply on separate lines of the message. The fields are delimited with asterisks.
If I add ~ at the end of each line, and delete all of the CRLFs so that the entire message is on one line, the BIC is able to successfully map the EDI message to XML.
Without having the vendor change the format of the file, what can I do to configure the Seeburger adapters to recognize CRLF as the segment delimiter so I can process the vendor's files as they are currently creating them?Try this in the module chain
localejbs/Seeburger/ReplaceString Local Enterprise Bean key
Then in module key parameter
key searchString "\n"
key replaceString "~"
Regards,
Prateek -
ISA Level :: Repeating Character Delimiter Issue
I am receiving an 850 EDI v 5010 X12 document form our trading partners which is being processed in B2B and forwarded to SOA for further processing. The data coming in in PO1 Segment is as under :
PO1*00001*20*EA*12*UM*UP*085896392170*PI*497040453*VA*K39217US*SK*4103636*OT*1397
B2B Successfully processed the EDI , but when i look at the Application message (XML), the Element-639, Element-235_1, Element-234_3 are getting generate improperly and not as per the specification or the data. For eg. Element-639 is only populating M instead of UM, similarly Element-235_1 is populating P instead of UP. (I am attaching the Application Message, EDI file, ECS used for this purpose and B2B configuration export)
<Segment-PO1>
<Element-350>00001</Element-350>
<Element-380>20</Element-380>
<Element-355_1>EA</Element-355_1>
<Element-212>12</Element-212>
<Element-639>M</Element-639>
<Element-235_1>P</Element-235_1>
<Element-234_1>085896392170</Element-234_1>
<Element-235_2>PI</Element-235_2>
<Element-234_2>497040453</Element-234_2>
<Element-235_3>VA</Element-235_3>
<Element-234_3>K39217</Element-234_3>
<Element-234_3>S</Element-234_3>
<Element-235_4>SK</Element-235_4>
<Element-234_4>4103636</Element-234_4>
<Element-235_5>OT</Element-235_5>
<Element-234_5>1397</Element-234_5>
</Segment-PO1>
The issue I figured out was with the ISA Delimiters coming in the EDI File :
ISA*00* *00* *14*001695568GT *12*4155722700 *120906*0038*U*00501*000000118*0*T*>
The Repeating character delimiter in the EDI file is coming as U and hence any data containing 'U' is being treated as a delimiter by B2B. How can i override this? Is there a way B2B can preprocess and change the delimiters coming in the EDI file at ISA levels?The Repeating character delimiter in the EDI file is coming as U and hence any data containing 'U' is being treated as a delimiter by B2B.This is poor selection of delimiter. Character U can easily be part of data and hence it must not be chosen as a delimiter. This issue should only be fixed at sending side by either choosing a delimiter appropriately (so that it does not appear in data easily) or by using "Replacement Character".
Regards,
Anuj -
Error B2B Segment ISA at guideline position missing
Hi Guru's
Wehn we are running the B2B by giving it EDI file we are getting following error:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>C0A8633811F1CC820E7000006E1F0400-1</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5016: A mandatory data element is missing.</errorText>
<errorDescription>
<![CDATA[Machine Info: (soaappcrp1.dpi.com)
Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837 ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
<errorDetails>
<parameter name="GroupReceiverID" value="9099751019"/>
<parameter name="TransactionImplementationReference" value=""/>
<parameter name="Size" value="660"/>
<parameter name="TransactionChildCount" value="23"/>
<parameter name="InterchangeReceiverQual" value="01"/>
<parameter name="InterchangeChildCount" value="1"/>
<parameter name="InterchangeControlVersion" value="00200"/>
<parameter name="GroupID" value="OG"/>
<parameter name="SubelementDelimiter" value=">"/>
<parameter name="InterchangeSenderQual" value="12"/>
<parameter name="InterchangeUsageIndicator" value="P"/>
<parameter name="GroupChildCount" value="1"/>
<parameter name="InterchangeSenderID" value="8283234100 "/>
<parameter name="InterchangeControlNumber" value="000271883"/>
<parameter name="InterchangeTime" value="1315"/>
<parameter name="RepeatingSeparator" value=""/>
<parameter name="ErrorScope" value="Transaction"/>
<parameter name="GroupVersionNumber" value="004010"/>
<parameter name="InterchangeDate" value="081103"/>
<parameter name="TransactionTrailerControlNumber" value="171889"/>
<parameter name="InterchangeAuthorizationInfoQual" value="00"/>
<parameter name="GroupSenderID" value="8283234100"/>
<parameter name="InterchangeAuthorizationInfo" value=" "/>
<parameter name="GroupTrailerControlNumber" value="271883"/>
<parameter name="InterchangeTrailerControlNumber" value="000271883"/>
<parameter name="SegmentDelimiter" value="
"/>
<parameter name="InterchangeControlStandard_RepeatingSeparator" value="U"/>
<parameter name="TransactionID" value="875"/>
<parameter name="GroupControlNumber" value="271883"/>
<parameter name="InterchangeComponentElementSep" value=">"/>
<parameter name="InterchangeSecurityInfo" value=" "/>
<parameter name="DecimalSeparator" value=""/>
<parameter name="GroupAgencyCode" value="T"/>
<parameter name="InterchangeSecurityInfoQual" value="00"/>
<parameter name="InterchangeReceiverID" value="041158668 "/>
<parameter name="ReleaseCharacter" value=""/>
<parameter name="GroupTime" value="1315"/>
<parameter name="TransactionControlNumber" value="171889"/>
<parameter name="GroupDate" value="20081103"/>
<parameter name="InterchangeAckRequested" value="0"/>
<parameter name="ElementDelimiter" value="*"/>
</errorDetails>
</Exception>
In the logs I am seeing the following error 2009.01.28 at 02:28:11:116: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup
1c
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Enter
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = TransactionID, val = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [875]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = ec_DataNodeName, val = [Transaction]
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup return = true
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = ecsFileKey
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = 6177FD270834B0EEE043C0A86365B0EE-274-1-2
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsOptFileBlob
2009.01.28 at 02:28:11:247: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValueBlob Param Name = ecsFileBlob
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = xsdFilePath
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.01.28 at 02:28:11:594: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber sName = Transaction, controlNumber = 171889
2009.01.28 at 02:28:11:596: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:setControlNumber return = true
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = TPName
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = lck
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Enter
2009.01.28 at 02:28:11:604: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit NodeGUID = {5CB8FDC2-ED26-11DD-93E2-00151769BE8C} position = 0
2009.01.28 at 02:28:11:605: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doCommit Leave
2009.01.28 at 02:28:11:620: Thread-40: B2B - (DEBUG) iAudit report :
Error Brief :
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
5016: A mandatory data element is missing.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{5CB88E1E-ED26-11DD-93E2-00151769BE8C}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Wednesday, January 28, 2009</ExecutionDate> <ExecutionTime>02:28:11 AM (PST)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>4</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">4</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath/> <FileName/> <LastModified/> <FileSize/> <DataURL>file://</DataURL> </DataFile> <Interchange Guid="{5CB8EE72-ED26-11DD-93E2-00151769BE8C}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>856</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">12</Link> <Link Name="InterchangeSenderID">8283234100 </Link> <Link Name="InterchangeReceiverQual">01</Link> <Link Name="InterchangeReceiverID">041158668 </Link> <Link Name="InterchangeControlVersion">00200</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">12</Property> <Property Name="InterchangeSenderID">8283234100 </Property> <Property Name="InterchangeReceiverQual">01</Property> <Property Name="InterchangeReceiverID">041158668 </Property> <Property Name="InterchangeDate">081103</Property> <Property Name="InterchangeTime">1315</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00200</Property> <Property Name="InterchangeControlNumber">000271883</Property> <Property Name="InterchangeAckRequested">0</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x3e</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x2a</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0xd0xa</Property> <Property Name="SubelementDelimiter">0x3e</Property> <Property Name="InterchangeChildCount">1</Property> <Property Name="InterchangeTrailerControlNumber">000271883</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{5CB8F926-ED26-11DD-93E2-00151769BE8C}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>107</StartPos> <Size>732</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>ES</ID> <Name>ENVELOPE SEGMENTS</Name> <Standard>X12</Standard> <StdVersion>SERVICE SEGMENTS</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="GroupSenderID">8283234100</Link> <Link Name="GroupReceiverID">9099751019</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">OG</Property> <Property Name="GroupSenderID">8283234100</Property> <Property Name="GroupReceiverID">9099751019</Property> <Property Name="GroupDate">20081103</Property> <Property Name="GroupTime">1315</Property> <Property Name="GroupControlNumber">271883</Property> <Property Name="GroupAgencyCode">T</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">271883</Property> </Properties> </NodeInfo> <Transaction Guid="{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}" TransactionAckCode="R" RError="4" NError="0" OtherWI="0"> <DataXPointer> <StartPos>166</StartPos> <Size>660</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>875</ID> <Name>GROCERY PRODUCTS PURCHASE ORDER</Name> <GroupID>OG</GroupID> <Standard>X12</Standard> <StdVersion>V4010</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="TransactionID">875</Link> </Links> <Properties> <Property Name="TransactionID">875</Property> <Property Name="TransactionControlNumber">171889</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">23</Property> <Property Name="TransactionTrailerControlNumber">171889</Property> </Properties> </NodeInfo> <TransactionErrors> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="1" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment ISA(Interchange Control Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1340</IID> <ID>ISA</ID> <Name>INTERCHANGE CONTROL HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>ISA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">0</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">430</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>0</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="2" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GS(Functional Group Header) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 0{br}{tab}Character: 837</ErrorMsg> <DetailGuidelineInfo> <IID>1399</IID> <ID>GS</ID> <Name>FUNCTIONAL GROUP HEADER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GS</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">1</Parameter> <Parameter Name="_ec_last_known_data_offset">837</Parameter> <Parameter Name="_ec_node_id_">469</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">837</Parameter> <Parameter Name="ec_DataPath"/> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath"/> <Parameter Name="ec_SegmentCount">0</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>837</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="3" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment GE(Functional Group Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1431</IID> <ID>GE</ID> <Name>FUNCTIONAL GROUP TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>GE</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">2</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">486</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> <Segment RError="1" NError="0" OtherWI="0"> <SummaryGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Sequence/> </SummaryGuidelineInfo> <DataInfo> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> <DataPosition>23</DataPosition> </DataInfo> <SegmentErrors> <Error ErrorCode="{266F5511-2133-45F1-8DB6-79B388F18789}" Severity="Normal" Category="Rejecting" Index="4" ID="50160000"> <ErrorBrief>5016: A mandatory data element is missing.</ErrorBrief> <ErrorMsg>Segment IEA(Interchange Control Trailer) at guideline position (N/A) is missing. This segment's standard option is Mandatory.{br}{br}This segment was expected after:{br}{tab}Segment Count: 23{br}{tab}Character: 824</ErrorMsg> <DetailGuidelineInfo> <IID>1442</IID> <ID>IEA</ID> <Name>INTERCHANGE CONTROL TRAILER</Name> <Requirement>Mandatory</Requirement> <UsrRequirement>Must Use</UsrRequirement> <Excluded>0</Excluded> <MaxUse>1</MaxUse> <Key>IEA</Key> </DetailGuidelineInfo> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">EDIExistence</Parameter> <Parameter Name="_ec_CaseID">00</Parameter> <Parameter Name="_ec_dn_guid_">{5CB8FDC2-ED26-11DD-93E2-00151769BE8C}</Parameter> <Parameter Name="_ec_index">3</Parameter> <Parameter Name="_ec_last_known_data_offset">824</Parameter> <Parameter Name="_ec_node_id_">490</Parameter> <Parameter Name="_ec_size_">0</Parameter> <Parameter Name="_ec_start_pos_">824</Parameter> <Parameter Name="ec_DataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_ElementCount">0</Parameter> <Parameter Name="ec_PrevDataPath">SE*23*171889171889</Parameter> <Parameter Name="ec_SegmentCount">23</Parameter> <Parameter Name="ec_SubElementCount">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> <Parameter Name="ec_group_code">1</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1>SE*23*171889</Part1> <Part3/> <DataXPointer> <StartPos>824</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </SegmentErrors> </Segment> </TransactionErrors> </Transaction> </FunctionalGroup> </Interchange></AnalyzerResults>
2009.01.28 at 02:28:11:621: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processIncomingDocument sErrorGuid =
I have cheked the EDI payload in spec builder and it comes up fine. I tried doing whole configuration by getting new ECS file from spec builder, making a Buisness Action, creating TP, creating aggrement.
Any guess what the issue is.
any pointer will be highly appreciated.
Regards
SahilHi Sahil,
It seems like the ecs file used in the document definition contains the Interchange(ISA)/group segments(GS). Please remove the these ISA and GS segments and use only the transaction set (ST) segments.
Thanks and Regards,
Prasanna -
The reference to entity "M" must end with the ';' delimiter issue
Hello,
My interface scenario is third party system sending file to PI; Then PI is generating IDOC and sending it to ECC system.
Now issue is we are getting below error message,
“The reference to entity "M" must end with the ';' delimiter”.
What do I have to do to fix this error? I'm not sure what the problem about the delimiter is?
I am giving example here,
Input payload like:
<NAME>H&M</NAME>
<NAME_2>H&M</NAME_2>
<NAME_3></NAME_3>
<POSTL_CODE>00002</POSTL_CODE>
<CITY>HELSINKI</CITY>
If I removed ‘&’ from <Name> segment value then IDOC is generated correctly.
But Name is coming to PI like that only.
Please help me.Hello Rohan
It might be that PI thinks &M is part of an XML escape code in line
<NAME>H&M</NAME>
it should be <NAME>H&M</NAME>
Kind regards
Steve -
Hi All , currently we hare installing single stack SAP PO .We are running very very late .
As per client commitment we must install the B2B add on tool in decentralised engine . We are facing the following issue .
Can not start
com.sap.aii.adapter.ediseparator.app ( 622677 / 2014 )
This is related to issue we are facing after the B2B addon support pack upgrade, I have updated the SAP
message with the required information and waiting for SAP's response.
We got an unofficial input from one of my friends in SAP that this feature is not possible in decentralised engine. I wish to know , has any one done it in decentralised engine , to be more precise , IS IT POSSIBLE ?
Thanks and Regards,
Arnab Mondal.Hi Arnab,
Follow this thread: Error While Upgrading B2B AddOn to SP02
Seems like they face a similar problem.
Kind regards,
Dimitri -
Import Manager Delimiter Issue "|
Hi,
We are facing a issue in during Import...We are loading Pipe Delimited file. Whenever we get "after |(Pipe) MDM is throwing an exception stating that 'Number of field values does not match the field columns'...Please let me know any body faced these kind of issues and solution. The format used here is UTF-8...
Example : |TEST123"EEE|TEST|A| - Here " comes after the Pipe and MDM Import Manager Accepting
|"TEST123 EEE|TEST|A| - MDM Import Manager is throwing an error stating that 'Number of field values does not match the field columns' because " comes immediately after pipe....
Thanks
Ganesh KottiGanesh, please see [Note 1346052 - Connecting to source Import Manager error message|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1346052].
The " has special meanings in import manager and can only be used in pairs. If the first character of a field is a ", then there has to be another one in the same field. Or you can remove it alltogether. -
Oracle SOA B2B 10g Console Issue
Hi All,
I'm trying to create a Business Action in Oracle SOA B2B 10g Console but getting below error, please suggest.
Error
An error occured when creating the business action
Erroe -: AIP-11052: Writing following objects: Document Type failed due to following constraint violation:
DOCUMENTTPE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION
Using Custom Document over Generic exchange protocol to create a business action.
Note: Tried by bouncing server once, even though getting same error.
Regards,
Jagadesh.Jagadesh,
Oracle 10g version is very old release of Oracle B2B. In the 11g or 12c release, it has been enhanced with many features, optimised, integrated with SOA and it is very easy to use.
Hence it is highly advised to install the later version of 11g or 12c.
This link might help you - https://blogs.oracle.com/oracleb2bgurus/entry/what_it_takes_to_migrate_an_ex
Incase if there is any issue in production environment of 10g, you might not get the support if you file any SR.
Regards, -
IDoc segment version issue in ECC upgrade from 5.0 to 6.0
Hi experts,
we are in the process of upgrading our ECC environment from 5.0 to 6.0. We have quite a few interfaces which use ORDERS/Invoice Idocs in customised form. In ECC5.0 environment, we had developed a Z segment in the ORDERS Idoc and the segment release was set as 640. Everything worked fine in ECC5.0.
In upgraded environment, SAP has released new version of some segments. one of those is E1EDP01. This segment has 2 new versions in ECC6.0 environment - 007 and 008. This change in the version changes the data in the IDoc and hence interface goes in error at the EDI provider.
We have tried to use 640 as the IDoc segment release in the partner profile of the IDocs. This still gives us an issue because the 007 version of the segment E1EDP01 has release 620 and hence the Idoc picks up 007 version instead of 006 version as desired. When we change the partner profile with Segment release in the IDoc type as 46C, it gives us an issue in the Z segment saying that the IDoc segment is not released in 46C and the Idoc goes in error.
has any one faces such situation in the past? if yes, please throw some light.
Thanks in advance.Please let me know if your issue was resolved. I have similar issue now.
Thanks,
Sailaja -
Dear expert
our client implement SAP in 2006 without activating document splitting and profit center accounting & segment & 2011 after migration we are going to implement document spiting and profit center accounting & segment.
My Question
what are the possible way to update all profit center and segment with OPENING BALANCE
Regards
Ajeesh.,sMate....
Profit Center: This will be carrying the Segment field where ever you use PC. Bcoz, Segment will be defaulted in PC Master data.
Every Revenue item will be given PC, nad PC will carry Segment. So you do not have any issues in reporting.
All Open items of AR, AP off-setting entry will be updated with PC while uploading into SAP.
Segment - PC - CC
Hope it helps
Thanks -
CCMS agent - segment name issue
Hello,
Does anybody know where the CCMS agents get their segment name (visible in RZ21 transaction) ?
I have a problem with one of my agent that doesn't have the right segment name and it's causing a lot of other problems.
If someone has any idea on this, it would help me a lot.
Thank you very muchRouger,
I am not sure whether i understand your issue.But anyway try these steps to register and unregister the ccms agents...Please explain next time if doesn't works.
ABAP -- sapccms4x agent
Registering the agent -
> sapccm4x -R -f /usr/sap/SID/ccms/log/sapccm4x/csmconf pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
starting the agent -
> sapccm4x -DCCMS pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
status of the agent -
> sapccm4x -status pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
unregistering the agent -
> sapccm4x -U pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
Java -- sapccmsr agent
sapccmsr -DCCMS -j2ee pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS00_hostname
sapccmsr pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS00_hostname -j2ee -initshm
( To clear shared memory )
Try this SAP Note 883361 - CCMS Agent does not start
Hope this will help you.
Thanks
Kalyan
Pls reward if answer is helpful. -
PI : Idoc to JDBC scenario : repeating segments mapping issue
Experts
Please help.
Question reg. mapping for ECC idoc to JDBC scenario.
I am using the ORDRSP idoc which has multiple segments as below.
IDOC -> multiple E1EDK14 segments with 2 fields (QUALF and ORGID)
Depending on the value of the QUALF field i need to populate the column in my target structure.
QUALF 001 => Colmn a
QUALF 002 => Colmn b
For now my graphical mapping is very simple - QUALF => column a (done just to find out how PI mapping works)
What happens in my case, is the PI Payload shows all the E1EDK14 segments however only the value 006 present in the first occurence goes into the target column.
How do I repeat a mapping between QUALF and target col. for multiple occurences of the same segment?
Please can you guide me reg. use of context, loop over segment, UDF = which will be the best solution to achieve this?Hi
My mapping is as below. I will take an example of a sales order that has 2 line items 00010, 00020. The payload is as follows
I see this payload in the SXMB_MONI transaction => Receiver grouping => Payloads
- <ZORDRES>
- <IDOC BEGIN="1">
+ <EDI_DC40 SEGMENT="1">
+ <E1EDK01 SEGMENT="1">
+ <E1EDK14 SEGMENT="1">
<QUALF>006</QUALF>
<ORGID>01</ORGID>
</E1EDK14>
+ <E1EDK14 SEGMENT="1">
<QUALF>007</QUALF>
<ORGID>01</ORGID>
</E1EDK14>+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDK03 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDKA1 SEGMENT="1">
+ <E1EDK02 SEGMENT="1">
+ <E1EDK02 SEGMENT="1">
+ <E1EDK17 SEGMENT="1">
+ <E1EDK18 SEGMENT="1">
+ <E1EDK18 SEGMENT="1">
+ <E1EDP01 SEGMENT="1">
<POSEX>000010</POSEX>
+ <E1EDP01 SEGMENT="1">
<POSEX>000020</POSEX>
</E1EDP01>+ <E1EDS01 SEGMENT="1">
<SUMID>001</SUMID>
<SUMME>2</SUMME>
</E1EDS01>
+ <E1EDS01 SEGMENT="1">
<SUMID>002</SUMID>
<SUMME>1100.00</SUMME>
<SUNIT>GBP</SUNIT>
</E1EDS01>
</IDOC>
</ZORDRES>
There are 2 problems. First one which I discovered after posting the query. I can see only the line item 10 in the query that gets contructed in PI to insert the data into the target jdbc table. Please see jdbc receiver communication channel log below
If you see above there are 2 E1EDP01 segments for line 00010, 00020.
INSERT INTO tblOItem (IDocDate, IDocTime, SalesOrderNo, ItemNo, Plant, ItemCategory, UnitSellPrice, QuantityOrdered, QuantityAllocated, ScheduledDeliveryDate) VALUES (20111206, 135530, 0015002085, 000010, 0086, ZTAN, 0.00, 1.000, 1.000, 20111201)
My source and target mappings are as below.
ZSALORD
IDOC
BEGIN
E1EDK01
E1EDP01
POSEX =============> SalOrdItm table column itemno
My target side structure (idoc to jdbc scenario is as follows)
I have mapped the E1EDP01 to Statement - I thought this will build one query per line item (per occurence of E1EDP01) but this is not working.
MT_OITEM
Statement
dbtablename ============> SalOrdItm
action =================> Insert
table
access
Itemno (this is one of the columns from the table)
The occurence of E1EDP01 is 0..9999999 while the occurence of Statement node is 1...unbounded.
Please is there any email address where I can send you screen shots if the above is not clear.
I need to get this interface delivered as soon as possible but am STUCK.
Edited by: gary jojo on Dec 6, 2011 3:06 PM -
Hi all,
We are implementing CRM B2B 7.0 and we need to attach pdf files to the server. When we try to upload the pdf file the server seems to do do nothing and the file is not uploaded. The transaction we use to upload the file is COMM_PCAT_IMS_INIT.
Any suggestions why the server refuses to upload the pdf file?
ThanksCheck you have completed the following configuration steps for PDF documents.
(1) You maintain the document classes / types that can be assigned to a catalog area and/or item in the Customizing
(2) CRM IMG: SAP NetWeaver -> Application Server -> Basis Services -> ArchiveLink -> Basic Customizing -> Edit Document Classes).
Maybe you are looking for
-
T400 screen blinks, goes black, then returns
Hi & hope someone can give some guidance. I have a T400, Win7Pro 32bit that has been acting strange. It is a problem that I sent it back for right after I got it, but now am out of warranty. While using it (not at start up, usually has been running f
-
Can I able to view ASP pages in iplanet web server
can iplanet web server handle the ASP pages in Windows NT server. i tried but i might be wrong configuring it in content manager, anybodys help will be appreciated.
-
How to check Tablespace in DB2 with AS400
Hi Guru, Can u please tell me how to check tablespace in db2 database with ecc5.
-
I cannot access Epson profiles using Photoshop CS
Trying to print from Photoshop CS using Epson 2200 and R800 but profiles are not available in print dialog. Is this fixable? Thanks.
-
Hi all, I'm using FM 'REUSE_ALV_GRID_DISPLAY' in my program. However, I'm having problem getting the current row or the cursor position in my ALV. If possible, I do not wish to use OO method in doing this. Is there any other way?