Back again with problems

Back in Feb I posted about having the "blue screen of death" and after many attempted solutions I had to resort to full reinstall. Ibook G3 running Jaguar 10.2 had been working great since and a few weeks ago I got the gray screen with pinwheel. I was able to do a disk repair but some programs didn't work. I then did an archive and install but still having problems with a few programs. I am trying to update to 10.2.8 but it won't work. Any suggestions?

DiskWarrior would be my suggestion. I recently was able to help my sister-in-law upgrade from 10.2.8 to Tiger after running DiskWarrior.
Hopefully it will be able to help you as well.

Similar Messages

  • Fan Noise back again with 3.1.6-1-ARCH

    Hi,
    I opened this ticket (before) https://bbs.archlinux.org/viewtopic.php?id=132077 to solve this issue, and now with the new kernel the temperature is back again
    coretemp-isa-0000
    Adapter: ISA adapter
    Physical id 0: +52.0°C (high = +86.0°C, crit = +100.0°C)
    Core 0: +51.0°C (high = +86.0°C, crit = +100.0°C)
    Core 1: +52.0°C (high = +86.0°C, crit = +100.0°C)
    and of course the fan noise is unbearable again..
    ERR: nothing changes with the fallback ,was a wrong impression
    Please help, or I should never upgrade to other kernels?
    Last edited by r0b0t (2012-01-01 20:57:34)

    I never checked it with htop buthere we have some info (I try keeping it minimalistic)
    1) ps -ely
    http://pastie.org/3922312
    2) ps axjf
    http://pastie.org/3922320
    3) ps axms (threads information)
    http://pastie.org/3922330
    htop screens:
    http://i.imgur.com/oVRvP.jpg
    http://i.imgur.com/gwqEh.jpg
    So currently as "big" program I'm using only firefox (with only 1 tab opened)
    Adapter: ISA adapter
    Physical id 0:  +57.0°C  (high = +86.0°C, crit = +100.0°C)
    Core 0:         +53.0°C  (high = +86.0°C, crit = +100.0°C)
    Core 1:         +57.0°C  (high = +86.0°C, crit = +100.0°C)
    Last edited by r0b0t (2012-05-16 21:16:45)

  • Ok back again with 55 error code endless on and off loop

    So a few days ago i decided to clean up the computer. Removed/reinstalled/cleaned video card, 2 fans attached to a tall finned CPU cooler (to clean out the cooler fins) with q-tip and compressed air can, and remove filters and some fans to clean. All done with comp air cans and q tips. Had my anti static wristband attached and on a clean table with tile floors. Had to remove 2 sticks of RAM to get one of the fans.
    Also decided to add an ssd while i was at it. All went well except i couldn't get into the bios. Booted to windows fine but hung just after del key press just b4 bios setup. Posted in the Bios section for help and I was told to disconnect all hdd's and optical drive and try again. That worked. Reconnected optical...didnt work. Tried just HDD and it worked. Re connected the optical and it worked. Used the same ports as original (when this all started) and it worked. Weird but good to go. Connected SSD, configured windows to "see" the drive, all is good. Then I disconnected the computer, cleaned up a little of the wiring after the new ssd install (nothing was removed or reconnected) and one fan. Put the covers back on reconnected cables and went to bed.
    The next day I go to turn on the computer and i get the dreaded 55 error code and have an endless 3-5 second loop of on and off before it even gets to the splash screen. TV shows nothing. Tried CMOS clear every which way. nothing. Disconnected all components except for 1 ram, and CPU....still nothing. Tried several sticks of ram in each. Nothing works. Tried different PSU's...same thing. Disconnected all USB cables, Mouse, and case switches, same thing. Bench tested mobo with different power supply same problem. Tried different power cords still no worky.
    I dont know what to do. The mobo is still under warranty. Idk what I did to make it do this. Static, short while reconnecting audio out to a home amplifier. Static while cleaning up wiring? tried bios a and b, neither work.
    Please help...I'm about to just go buy a new board and send this one back and have a spare.     

    When I had the original problem, (not getting into the Bios but booted to OS fine) at the end of disconnecting and reconnecting, I had the HDD and Optical and new SSD connected like original and it worked when it didn't before being connected the same way. Just chalked it up to maybe not connecting something completely.
    Now I'm starting to think the problems are related
    So it worked BEFORE this latest problem. All I did then was add some zip ties to the new SSD cabling and put the panels back on. Didn't check to see if it worked after that, just assumed it did since I didn't do anything of significance.
    Then this. I did think about the can of comp air and yes it can do that. I thought I was being careful enough to not let it do that with just short bursts.
    I have not tried to remove and re-seat the CPU yet. I will try later and inspect the pins. At this point I think it can be attributed to one of the following things:
    1. The EVO Hyper 212 did kind of twist a little (it always has a little when pressure is applied) and bent a socket pin. When I put the panels back on I did have to clean up one of the push/pull fan wires and did twist the EVO a little.
    2. Something shorted/is shorting the board to do with the SATA connections. Maybe the SATA plug to board connection.
    3. Compressed air shot out some frozen water and corroded some connection somewhere over night.
    4. When plugging in the audio OUT from the back of the board to an amp Stereo L & R IN (converts to Surround Sound), the Amp was on and this jolted the board.   
    5. The compu-gods have decided to brick my mobo so as to have an excuse to buy a new one.
    3 things I have learned. 1. Get a water cooler and not use the big tower coolers. 2. Don't use compressed air especially in swamp-ass Florida. 3. Make sure the crap you plug into the computer is OFF.         
             

  • Back again with the frustrating email issue

    After having my BB reset again today by my it guys I brought it home to install a few programs  (BES mailbox, and a couple of games).  When I plugged the unit into my computer after starting dm (version 4.2) I was encouraged because it didnt do any of the sync things that it had done in the past.  I installed the software and voila I get the lovely email telling me I am no longer connected to the BES.  I tried removing the battery for a minute or so, but no joy.  Exploring further I noticed that under options>advanced options> enterprise activation that my email address is missing.  I have had this thing reset every day this week, I cannot figure out what I could be doing wrong.  Any ideas?
    Solved!
    Go to Solution.

    just uninstall dtm from add /remove programs and then re-install it from the cd that came with BB, and during the setup choose BIS as a install option.
    yes you have to buy 6 pack i guess. 
    Click on KUDOS to appreciate our efforts and mark the thread RESOLVED if your issue is resolved.

  • Back again with request for sound help

    I get the opening fanfare when kde starts.
    I also could hear a video that happened to be in a tab when Firefox started.
    None of the sound programs (kcsd, amarok, etc) utter a peep.
    Here's dialogue from a terminal:
    ]$ aplay /usr/share/sounds/alsa/Front_Center.wav
    ALSA lib pcm_dmix.c:1008:(snd_pcm_dmix_open) unable to open slave
    aplay: main:608: audio open error: Device or resource busy
    Otherwise Arch 86-64 seems.  EVEN cups started without any problem.
    Don't wanna go anyplace else.
    Your help very much appreciated.
    Bill

    Don't start several identical topics Bill, that is not the way to get help around here:
    Still looking for help with Sound

  • When i open iPhoto and want to share my photo on face book its popup with problem occur and ask me to repair when i repair it appears back again?

    when i open iPhoto and want to share my photo on face book its popup with problem occur and ask me to repair when i repair it appears back again?

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • My airport is turned itself off and lose contact with my wifi router, trying to turn it on again will not work, I have to restart my Mac for it to work again, but after 5 minutes, the problem is to go back again.

    my airport is turned itself off and lose contact with my wifi router, trying to turn it on again will not work, I have to restart my Mac for it to work again, but after 5 minutes, the problem is to go back again.

    Hi ..
    Follow the instructions for resetting the SMC >  Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • Have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2

    have the same problem tried the signing in and out, rebooting, uninstalling and back again nothing is working, on 4th download of creative cloud still coming up with lightroom 5 after signing in anf out, also signing out dowloading and signing in, spent 2 days on this, just cannot spend days on trying tricks and hacks

    I  am getting so mad because I cant even sign out OR quit! They are both grayed out. I have the spinning blue wheel in my apps and am trying to fix that but none of the solutions are working.

  • HT1199 Hi. I've got an issue with Pages running on Mavericks on Macbook air. Every time I open the app it hangs right there and I can't do anything on it. I've uninstall and install it back again but the issue still persists. Any help please?

    HI. I've got an issue with Pages running on Mavericks. Everytime I open it up it just hangs right there and I can't do anything with it. I've deleted the app and installed it back again but the problem sitll persists. Any help please?

    Thank you so much for helping,
    But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
    Anyway thank you very much for your time and effort!!!!

  • TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

    My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

    uninstall all iTunes,5 programes,this worked for me after reinstall them

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word and Pages.  Any idea of how to resolve this annoying problem is appreciated.  System: 10.10.1

    When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back.  The problem occurs in both MS Word 2011 and Pages.  Any idea of how to solve this annoying problem will be much appreciated.  System 10.10.1 on a MacPro (Late 2013)

    The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
    Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
         https://www.youtube.com/watch?v=ZNQ0D84DdF4
    What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

  • How to merge source data with RFC response and post back again as Idoc

    Hi All,
    This is the requirement we have for an interface
    The legacy application is sending Vendor master to PI 7.0
    If it is new vendor then it is send as an Cremas Idoc into SAP. Legacy (New Vendor) -
    > PI 7.0  -
    >Cremas Idoc SAP
    If it is changed Vendor legacy will only send changed fields for that Vendor.In PI we would like to call an RFC which will return all the data for that changed Vendor Number and then merge the RFC response with changed data from legacy and then send it to SAP as Cremas Idoc again with all values.
    I know these can be achieved using Proxy by custom Abap Code in SAP.But we would like to avoid it.
    How can we achieve it?
    1.RFC lookup - Shall we use these , when PI receives changed Vendor from legacy ,it will call RFC using RFC lookup and the response message from RFC lookup should be merged with source data .Is this possible?
    2.Shall we achieve this using BPM ?Is it feasible and How?
    Any Help greatly appreciated
    Thanks,
    V

    If it is changed Vendor legacy will only send changed fields for that Vendor.In PI we would like to call an RFC which will return all the data for that changed Vendor Number and then merge the RFC response with changed data from legacy and then send it to SAP as Cremas Idoc again with all values.
    I am not sure why you want to pull whole data from R3 and send back to R3.
    you can follow any of these approach..
    if you have any indicator for new/ changed cusotmer in the legacy data then trigger CREMAS IDoc accordingly.
    mapping rules will be diffrent for New and changed CREMAS idoc.
    otherwise just do RFC look up for each record then based on the output(new/changed) create or update cusotmer data through CREMAS IDoc.
    when changing the customer through CREMAS no need to pass whole data again. it is enough if pass the changed fields. offcourse qualifier values  for segments will differ.

  • Hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone helphi just

    hi just done some up dates on my i phone three it got half way through sync with my phone then the phone turned of and came back on again with the i tune picture and the end of the usb cable. but my phone is plugged into my computer can anyone help

    Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message.  http://support.apple.com/kb/HT1808
    Then you can restore your phone:  http://support.apple.com/kb/HT1414

  • I have recently upgraded to an iphone 5. When trying to sync/ back up with my current i tunes settings. I get the message the it 1.6GB over the storage capacity. Although when syncing my i phone 4 (same size 16GB) i do not have any problems?

    I have recently upgraded to an iphone 5. When trying to sync/ back up with my current i tunes settings. I get the message the it 1.6GB over the storage capacity. Although when syncing my i phone 4 (same size 16GB) i do not have any problems?' I am not sure what the problem may be?

    iOS uses more memory on the iPhone 5 than the iPhone 4 because there are quite a few more to iPhone 5. Therefore there will be less memory available on the 5. Reluctantly iOS 7, coming this fall, uses a bit less memory than iOS 6 so if you can do without a few apps until then you should be gravy!

Maybe you are looking for