Back in business.............

hello All,
 I picked up my new tower today and everything seems to be working great. Good news for me huh?.
 Anyways, I'll get on with it.............Is it normal for the rig to take about 2 minutes to get to the welcome screen in WinXP Pro after the loading screen finishes? I don't remember it taking that long before. I have used msconfig to turn off everything that I was comfortable turning off but it still takes 2 minutes. What is happening during that time that would lead to the delay? Is it something else (et al....not msconfig) that I should be looking at?
Thanks in advance,
                               Keith

Good Morning All,
 Yes JasonKruys it does seem like a long delay. I read through the link provided by syar2003 and didn't really know if my situation is the same thing. The thread was talking about how many bars zip accross the screen whilst WinXP loads ((usually takes about 5 for mine). The delay on my rig is between the time that screen finishes and the Welcome screen appears. I am not sure if the solution mentioned in that link would help me. What exactly is happening during those 2 screens?
 On another note, this system kicks some serious butt. Everything I have tried thus far works without a hitch. There are a few other questions I have though if anyone would like to comment.
                     1) I have yet to install corecenter on the advice of the guy who authorized my getting this new tower. When I told him, I think the errors I was getting with the 1st rig started after I loaded the utilites from the MB CD. He said just hold off on that for a little while and make sure the system is stable first.
        Q: is it safe to install corecenter if I don't plan on O/Cing the rig? (not just yet anyways).
                     2) Along those same lines, I install everest to check some things. The reported fan speeds,  temps and other usefull info. However when I look at the reported 12v reading it shows only 2.11v.
         Q:Is this normal or should I be using something else?
                     3) I think I have updated the drivers to the most current versions available, I have used LiveUpdate3 to do so. Yet when I look in device manager it shows a "!" under Universal Serial Bus controllers, specifically on a USB Mass Storage Device. I tried using update driver but get the 'windows needs to know where to look....' message.
        Q: How do I know what this is and where to look for the proper driver?
 This board and posters are wonderful....Thanks in advance,
                                                                                        Keith

Similar Messages

  • Backing Out Business Content

    Hi,
        Is there a way I can back out business content that has been installed. I have installed some but its has failed with an abap dump. In the meanwhile some info-objects have been set to 'revised' which has then meant proces chains etc have failed. I have created an OSS, but was wondering if anyone else knew of anything else I could try?
    Cheers

    There isnt any way to backout your changes unless BASIS takes daily backups of the systems.  You can ask them to restore your system back to a previous day ?
    You can run some programs to activate the InfoObjects in SE38
    RSDG_IOBJ_ACTIVATE.  Please note that this will activate the infoobjects with the changes. 
    There are other programs available to activate objects like transfer rules etc.  Try searching in SE38.
    What phase of the project are you in ?  still in development or production support.
    Which system did you do the activation in ?  Sandbox or development ? 
    Hope that helps.

  • 30 day email sync limit is huge draw back my business; is there a fix?

    My Previous BB phones gave me option to sync email older than 30 days. Also noted phone log is same limit when backed up form my own phone. As both features are vital to my operation, is there a way to work around this? 

    Dear Resident Expert
    Thanks for your comment! I found 10s of users with same complaint in the cackberry community: Im so fed up with blackberry......I cannot believe how stupid they are- obsessed with fab sync IT, theyve neglected the business functionality: They should have a program (similar to a Kalman filter) that
    1.) you can down load bucket loads of email which will sit in a secondary folder (say on your microSD
    2.) Initially on teh download they sSync say 90 days and download as much history as you want-
    3 You yourself have articluated that push technology allows you to download as much email as you want:
    Im going short Blackberry and have already made plans to return it and switch to another phone
    take care
    colinlaw

  • 810 back in business?

    So with Nokia boldly claiming that all Lumia phones running WP 8.0 will get an upgrade to WP 8.1 cyan -- are 810 users back in the fold?

    If T-Mobile decide to make it available, then yes. The 810 is definitely capable of running it, it's now up to T-Mobile and T-mobile only to allow it. You better start lobbying them asap.

  • Anyone else back in business?  Emails are coming in!

    I guess they had some extra time to fix it now that the new product annoucements are over.  Now, I get to make up for the 2 days without email!!!  I still want an explanation for this from Apple.

    Double tap the home button for multi-task apps .. then close out the mail app completely from the multitask bar. After that, relaunch the mail app
    let me know if it worked.

  • Back in business with iPhone & Siri

    OMG!! the upgrade is amazing
    i had a miriad of issues before..once i applied the upgrade..all vanished!! i also immediately turned on all things i had turned off and used my fone for Siri quite a lot before and got the message it had trouble connecting to network to many times to count...NOT any more!!
    i am seriously NOT having any issues...actually would appreciate the same kind of support for LIOn...that is sukky..beachballs everywhere!!
    good luck everyone..take your time to do it correctly..it states to do it plugged into electric outlet...probably just for battery power saving, but do all the correct steps and hope you get the fab results i have!!

    OMG!! the upgrade is amazing
    i had a miriad of issues before..once i applied the upgrade..all vanished!! i also immediately turned on all things i had turned off and used my fone for Siri quite a lot before and got the message it had trouble connecting to network to many times to count...NOT any more!!
    i am seriously NOT having any issues...actually would appreciate the same kind of support for LIOn...that is sukky..beachballs everywhere!!
    good luck everyone..take your time to do it correctly..it states to do it plugged into electric outlet...probably just for battery power saving, but do all the correct steps and hope you get the fab results i have!!

  • How can I delete latest update and go back to old one

    I have had nothing but trouble with the new update to 3.1.3 and want it OFF my phone. I want to delete it and just go back to business as usual. Does any one know how to do it? I was told that if I just do a restore, it will reinstall the latest version of OS any way. I hate the new mess I have with latest update.
    HELP!!!

    Irchr wrote:
    sorry, but it just looked like this last update was not ready to release and has caused so much trouble that Apple would have a fix or allow us to revert to previous level.
    You are probably not well enough informed to decide whether an upgrade is 'ready to release'. Remember there are millions of iPhones upgraded and only a very small minority with issues - many of which pre-existed 3.1.3
    I haven't had phone for very long now, but it is very frustrating to have a defective OS and phone. I would have thought this would be the place to do things LEGALLY, not hack the phone like I see on GOOGLE
    Hacking the phone is the only way to revert unless you have backups. Hacking the phone is not something that is discussed in these forums.
    You haven't even posted your problems so perhaps start there ?

  • Logical System Name Not appearing in the Business System

    Hi,
    Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
    Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
    Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
    Please also note that Business System is of the ROLE: Integration server.
    When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
    Can anyone please help us to update the 'Logical system name' in Business System in SLD?
    Regards,
    Rehan

    Hi Sunil,
    I followed your link till
    Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
    When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
    But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
    When I go back to Business system again its not showing the Logical system name in Integration tab.
    regards,
    rehan

  • I need to Downgrade my iPhone 3G from iOS 4.0 back to 3.1.3

    I've had the same problem as many iPhone customers, updating iTunes to newest version (9.2.0.61) and Upgrading my iPhone 3G to v. 4.0 from v 3.1.3.
    iTunes successfully upgraded to iOS 4.0, but the Restore of my backup FAILED!!! OVER and OVER and OVER and OVER and OVER and OVER Again! I know for a fact that I tried to Restore my Backups from: AppData\Roaming\Apple Computer\MobileSync\Backup folder. At one time I had 14 backups and each 1 was 3.55GB. This is kind of interesting, because after my last backup just before the iOS 4.0 Upgrade, the backup was 3.55GB. After each failed Restore and then another backup,etc. *+each and every backup was 3.55GB+*.
    Each time (over 25) I have to do a hard restart(see the USB Logo), install iOS 4.0 > Restore, which the progress bar goes about a quarter of an inch and then loops over and over, trying to Restore my phone. Just an attempted Restore takes at least 45 minutes! The time of any of the Restores I've tried, which are many and all take the same amount of time and are all 3.55GB.
    I can't tell you how many migraines I've had over this B.S. or how many hours over the last 3+ weeks I've been trying to get my data back. I don't care about the pictures or the applications, cuz I can always get them. It's all the IMPORTANT Data I can't get back that I desperately NEED. OK, I'll quit complaining. Sorry! I had to get it off my chest. ;^\
    I spent weeks on the phone with 2 different *+Apple Senior Advisor's+*, who in turn submitted a number of Tickets to the *+Apple Engineers+*.
    After a few weeks of phone calls back and forth, I've spent untold hours off the phone trying to get my NOTES, CALENDER, CONTACTS, and AUDIO RECORDINGS, I've saved for the last 2 years, without any good results.
    The last reply from an Apple Engineer, was to try something I had already tried and the other answer was to *+TRY 3rd. Party Apps & Suggestions+*.
    OK, one of the things I did was to download some files, such as:
    1) iPhone1,23.1.3_7E18Restore.ipsw (Apple Device Software Update File)
    2) iRecovery Application (.exe)
    3) libusb0.dll
    4) libusb-win32-filter-bin-0/1/12/2
    when I installed either 3 or 4, my PC started acting weird, so I restarted my PC and got the BSOD. I restarted my PC in Safe Mode and uninstalled libusb..., restarted my PC and I was back in business. I haven't tried anything since and need step by step HELP. PLEASE, PLEASE, PLEASE!
    I have a comprehension disability, which makes it difficult at best to get much accomplished on my own.
    5) redline5.dll Windows Batch File
    6) EnterRecov Windows Batch File
    7) exitrecovery.commandlist COMMANDLIST File
    8) IPHUCWIN32 Application
    9) RecBoot Application
    Now I have these 9 things to work with and will download anything else I need.
    Thanks in advance ;^)

    I updating iTunes to newest version (9.2.0.61) and Upgraded my iPhone 3G to v. 4.0 from v 3.1.3. Now my iPhone won't Restore from my backups.
    iTunes successfully upgraded my iPhone 3G to iOS 4.0, but the Restore of my backup FAILED, OVER and OVER Again! I tried to Restore my Backups from: AppData\Roaming\Apple Computer\MobileSync\Backup folder. At one time I had 14 backups and each 1 was 3.55GB. This is kind of interesting, because after my last backup, just before the iOS 4.0 Upgrade, the backup was 3.55GB. Each and every backup was 3.55GB
    Each time (over 25) before I could do another attempt to Restore, I would need to reinstall the iOS 4 (see the USB data cord & iTunes Logo). During Restore, which the progress bar goes about a quarter of an inch and then loops over and over, trying to Restore my phone. Just an attempted Restore takes at least 45 minutes! The time of any of the Restores I've tried, which are many and all take the same amount of time and are all 3.55GB. Go figure!
    I can't tell you how many migraines I've had over this B.S. or how many hours over the last 3+ weeks I've been trying to get my data back. I don't care about the pictures or the applications, cuz I can always get them. It's all the IMPORTANT Data I can't get back that I desperately NEED. OK, I'll quit complaining. Sorry! I had to get it off my chest. ;^\
    I spent weeks on the phone with 2 different Apple Senior Advisor's, who in turn submitted a number of Tickets to the Apple Engineers.
    After a few weeks of phone calls back and forth, I've spent untold hours off the phone trying to get my NOTES, CALENDER, CONTACTS, and AUDIO RECORDINGS, I've saved for the last 2 years, without any good results.
    The last reply from an Apple Engineer, was to try something I had already tried and the other answer was to TRY 3rd. Party Apps & Suggestions.
    OK, one of the things I did was to download some files, such as:
    1) iPhone1,23.1.3_7E18Restore.ipsw (Apple Device Software Update File)
    2) iRecovery Application (.exe)
    3) libusb0.dll
    4) libusb-win32-filter-bin-0/1/12/2
    when I installed either 3 or 4, my PC started acting weird, so I restarted my PC and got the BSOD. I restarted my PC in Safe Mode and uninstalled libusb... I restarted my PC and I was back in business. I haven't tried anything since and need step by step HELP. PLEASE, PLEASE, PLEASE!
    I have a comprehension disability, which makes it difficult at best to get much accomplished on my own.
    5) redline5.dll Windows Batch File
    6) EnterRecov Windows Batch File
    7) exitrecovery.commandlist COMMANDLIST File
    8) IPHUCWIN32 Application
    9) RecBoot Application
    Now I have these 9 things to work with and will download anything else I need, but I need to know what to do with the ones I really need and in the proper order.
    Thanks in advance ;^)

  • HT201303 Has anyone experienced being a victim of GNU Emacs Api Emulations hacking thru URL's - Feeds - Email - Redirect - Data Scrabling and more? We are unable to stop them because they are super users. They come back and do more damage. Help Please.

    We have been compromised within our businesses from an empolyee that was terminated with GNU Emac Api enulation program that has infiltrated all of our brand new Apple Computers. We made a decision to move to Mac's this year because of all our businesses being internet based and we are in several different platforms that require many different passcodes, email address, bank accounts, etc. It is not one seamless system that would address one email, password, bank account, etc.
    Eacy time we change one segment of our business unit to move to the next one to fix, we go back to check the previous one that we changed and they have already been in the accounts and changed them so that we have to redo them.
    The information is so broad and wide that the only way I know to ask this first questions - has anyone had this happen to them? We have seeked many avenues with law, experts, reformating our 2 momth old systems 2-3 times each and start over. They are the super users of this program and we can not get them out by changing passwords, accounts, etc. They have everything we do and make sure they keep changing it as we work on the next segment. They have cost our small business thousands of dollars already.
    I am a victim of something that even the local forenic authority is stumped because they don't know where to start. We are not a banking instutition or 100 million dollar company to get the help we need. We don't want to find hackers like they have done to us, we want to get them stopped and get us back on track to start getting our businesses rebuilt.
    Lots of stuff, but WE ARE BEGGING for HELP.
    Apple Support today spent 3 hours with us on the phone and our suppot representative was awesome, but they also said it was big and we need to reach out to the Apple community to see if they heard of anything like this crime. They are in the URL's, RSS Feeds and ghosting everything we do.
    I was told by our local Mac support that this was done by someone that was highly sophicated and they did not know many people that could do this type of damage. I can't image that someone in the Apple community would not know of someone that can assist. The one security company we contacted was around $25,000 to fix this aweful crime.
    We just want them stopped and put in jail so we can go back to business before it destoys us completely.  They even installed emacs on all of our Iphone and androids. WE are being taped, video recorded and eery key stroke is recored. They are only taking us down in middle America.
    Anyone have any ideas? Thank you.

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Cursor changes to "Busy" when timers expires in Form

    Forms 10.1.2.0.2
    I created a Form with a multinline block to implement a blinking effect on certain rows depending on certain conditions
    whilst using a repeating timer.
    The screen is working fine so far but I am facing the problem that the cursor automatically changes its status from
    normal to busy for a moment and then back from busy to normal when the timers expires.
    In addition, the status bar on the console (which is the lower right working status bar) displays a "working"
    condiition when the timers expires (scrolling from left to right each time the timer expires).
    This leads to annoying visible effects as not only my rows are blinking fine but also the cursor does -.-
    I removed the Synchronze; Built-In from the WHEN-TIMER-EXPIRED and also replaced any data processing within
    the Trigger by a Null; Statement but the cursor keeps on changing its Form automatically.
    I also tried to set the Cursor style to default within this Trigger but the cursor keeps on changing its Form.
    Is there any way to suppress this behaviour ?

    Hi,
    Do you have any security programs installed on your computer? If so, temperarily turn off them to check if this issue persists.
    We can also try to run Word in safe mode to test if the issue is caused to a problematic add-in. To do this, press Windows key + R, type
    Winword.exe /safe in the Run dialog and press Enter. 
    In addition, did you installed any printer drivers? If so, some bad printer drivers may cause such issue. Please make sure you have installed the latest printer driver form the official website. If possible, we can try to uninstall the printer drivers
    to check if the issue persists.
    Regards,
    Steve Fan
    TechNet Community Support

  • Customer not ready to send free of goods back But he wants money back for damaged stock

    Dear sd Experts please tell me How To Achieve In SAP
    Customer : 120000
    Company: AAA
    AAA Company offered if customer purchased Material ZZZ  For 100 qnty They will Give Free of goods Material XXX 15 For Diwali
    : ex: Now customer Purchased 100 qnty and he got 15 Free of goods from the company Now This scenario ok Imagine stock reached just one day before DIWALI  suddenly Customer Found some damaged stock Like 10 Items
    now he wants to back the stock  and he doesn't want the same material 10 Items  (zzz) He wants only Money
    because Once DIWALI Completed he cant sell the products he will be in loss ( i am giving just example to understand)
    so he wants money back .....................For 10 Qnty
    But he is not ready To Give back Free of goods Back (XXX) Because He purchased the stock From the company is giving free goods thats way
    Yes it is correct point From the customer side because every customer will think like this only no wrong with him ...
    Now coming to Company issue .... Company everything calculated material cost and finally decided That 100 Material ZZZ We can give XXX 15 Material As a free of Goods here no loss and no profit 
    But if customer Is asking Money back for Damaged stock and he doesn't want To give free of goods back ,,, So here from company point of view some loss will be generating definitely..100 %  so how we will proceed with FI @MM IN SAP
    Because I think another option plz guide me
    Thanks a lot

    Dear Venu,
    As i understood On a purchase of 100 TVs--10 DVD players are free(may be 10+1 offer)
    Now after receiving customer found 10TVs damaged
    (only TVs got damaged--not the free good DVD players)
    So he returned those damaged 10 TVs back to Business and he dont want to take this new 10 TVs based on his sales after his seasonal experiences.
    So now the adjustment can happen in the following ways:
    (solely depends on your understanding with your customer)
    1.Adjust the total amount only for 90 TVs(you can use credit memo else invoice correction request)
    2.here the question comes is for 90 TVs only 9 DVDs are free--(here again you can do in two ways charge the customer by a debit memo for additional one piece of DVD player   or   ask the customer to return that one DVD player)
    Hope this helps.
    Very Important note:
    I just saw somebody asking you to correct your punctuation and there is a like given by Our senior and respected member JP. we have to understand one thing here--always we  need to take these comments as positive manner(recently our respected moderator JP cautioned me  too through a direct message asking to correct my diction and some spelling mistakes--which i might be doing without any intention)
    Remember one thing in life--- all of our respected senior members are here to help us whenever we are facing career threatening issues--even though they dont know us personally --they are helping us & we come out with victory and smiley faces from all these issues--we should respect their comments and say thanks to the people who is correcting you at your career.
    To Respected JP: sir--i think you might have observed the change in my approach too
    (like ""me too"" at your message)
    whenever i am crossing-- requesting you again to correct me.
    sorry to give this pain again to you sir.
    Regards
    Phanikumar

  • Suddenly can't back-up with Time Machine

    Time Machine has finally completely quit. I have followed most of the suggestions on various Apple forums, including reformatting the backup HD (several times), repairing both the back-up and main HD, settting spotlight to private, quitting Finder (using Tinker tool), etc. Followed Pondini's very useful steps repeatedly. I get different error messages from Time Machine Buddy most every time. The most consistent refers to indexing.
    Below are the three most recent Buddy logs, in hopes somebody can help. Or suggest another backup solution.
    Starting standard backup
    Backing up to: /Volumes/Hitachi Orange/Backups.backupdb
    Ownership is disabled on the backup destination volume.  Enabling.
    Detected system migration from: /Volumes/Macintosh HD 1
    Backup content size: 498.4 GB excluded items size: 460.7 GB for volume Macintosh HD
    No pre-backup thinning needed: 45.22 GB requested (including padding), 930.58 GB available
    Waiting for index to be ready (101)
    Indexing a file failed. Returned 200 for: /System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/wx-2 .8-mac-unicode/wx/lib/inspection.pyc, /Volumes/Hitachi Orange/Backups.backupdb/Galloway Desktop (3)/2011-07-08-190340.inProgress/F18A8582-E9F7-4D93-9BA0-07DEB1749449/Macintosh HD/System/Library/Frameworks/Python.framework/Versions/2.5/Extras/lib/python/wx -2.8-mac-unicode/wx/lib/inspection.pyc
    Aborting backup because indexing of file failed.
    Stopping backup.
    Copied 60774 files (16.3 GB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    The one before
    Starting standard backup
    Backing up to: /Volumes/Hitachi Orange/Backups.backupdb
    Detected system migration from: /Volumes/Macintosh HD 1
    No pre-backup thinning needed: 37.67 GB requested (including padding), 877.17 GB available
    Indexer unavailable (200)
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0a4b0 "The file “classes.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0cf10 "The file “info.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0cf10 "The file “keyedobjects.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1005312b0 "The file “classes.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Copied 0 files (35 KB) from volume Macintosh HD.
    Backup canceled.
    And before that
    Starting standard backup
    Backing up to: /Volumes/Hitachi Orange/Backups.backupdb
    Detected system migration from: /Volumes/Macintosh HD 1
    No pre-backup thinning needed: 37.67 GB requested (including padding), 877.17 GB available
    Indexer unavailable (200)
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0a4b0 "The file “classes.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0cf10 "The file “info.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x102e0cf10 "The file “keyedobjects.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Error (256): fetching properties: Error Domain=NSCocoaErrorDomain Code=256 UserInfo=0x1005312b0 "The file “classes.nib” couldn’t be opened." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=5 UserInfo=0x103004520 "The operation couldn’t be completed. Input/output error")
    Copied 0 files (35 KB) from volume Macintosh HD.
    Backup canceled.
    Any help would be most appriciated.
    This is my iMac (Late 2010) running OS X 10.6.8, backing up to a 1Tb Hitachi external HD, connected directly (no hub) via usb.

    It's possible that the system was keeping some piece of the I/O error in memory and, after the underlying cause of the I/O error went away, something you did juggled the system's brain back to a non-error condition.
    You are absolutely correct to remain suspicious of your HD. While it's possible that changing USB cables or zeroing out the disk might have solved the underlying I/O problem it's equally possible that you have a failing drive on your hands that may only be showing ugly symptoms sporadically. There is a small risk that you will end up with two sets of damaged data if a drive fails during data transfer so it was very wise of you to order another drive.
    You might want to consider using Carbon Copy Cloner or Super Duper! to make a clone to your new drive. Having a TM backup and one or more clones, all on separate physical drives, is a very effective backup solution. That's the combo I use.
    When my Mini's internal drive failed it took about five minutes to boot from one of my clones, restore a few files from my TM backup, set TM to back up the clone, set SuperDuper to back up to my second clone. After that, I was fully back in business by booting from my clone which allowed me to get the Mini's HD repaired when it was convenient for me.

  • How do i get back my stateful session bean after it has been passivated

    hi ,
    How do i get back my stateful session bean after it has been passivated by container.
    i'm confused that is it possible or not .......give me answer
    i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
    now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
    java.rmi.NoSuchObjectException: no such object in table
    java.rmi.NoSuchObjectException: no such object in table
         at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
         at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
         at sun.rmi.server.UnicastRef.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
         at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
         at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
         at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
         at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
         at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
         at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
         at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
         at $Proxy1.makeNewAcc(Unknown Source)
         at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

    Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
    Chuck

  • How do I get my apps back after sync to MBP, Upgrade to iOS5?

    After Sync'ing my iPhone 4 to MBP, I upgraded to iOS5 on the iPhone and Lion on the MBP.  Now, my icons for iPhone apps are on the MBP.  I don't see how to get them back to the iPhone.  The former "Apply" button has disappeared.  What is the new procedure?

    Two things that I did wrong:
    1) I was in iTunes, clicked on the left navigation bar for Apps and expected to see something like "Apply".  This was incorrect.  I needed to click on my iPhone under Device in the Left Nav bar, and then, click on Apps in the top nav listing.  Then I could see my apps.  And,
    2) I could see that my apps had actually sync'd but they inexplicably sinc'd to a 3rd/4th/and 5th screen leaving the second screen nearly empty, so I thought they had never sync'd at all.
    So, I'm back in business.  Thanks to replyer.

Maybe you are looking for