Background Job ..... VERY URGENT

Hi,
I have scheduled a report for Execute in background. When I am executing in the background the initial screen what I am getting is background print popup then I am getting the background job schedule. Now my requirement is I dont want background print it should straight away go to background job schedule. Could you please help me out. Its very urgent issue.
Thanks
Vikranth Khimavath

Hi
Have you written any code for the execution of the report in background? if so what code was written?
ARE YOU CALLING ANY PRINT SCREEN BEFORE THE job scheduling screen?
check where and how you are scheduling the job?
Reward points if useful
Regards
Anji

Similar Messages

Issue in background processing- Very Urgent

A custom program which is scheduled to run every day as a background job, Failed yesterday with the below system log:
R3JD: SQL UPDATE FAILED. Error in ZMOMPO05. Contact R3JD Support. R3JD
Additional Info: A2000_UPDATE_PROCESS UPDATE ZMPOR FAILED.
Additional Info: SY-SUBRC RETURN CODE: 4
Transaction termination ZZ 999 ( ZMOMPO05 )
It got failed while trying to update a custom table, but when we tried to run manually in the foreground it got completed successfully, and also the problem was only for that day, as it was doing well before it failed yesterday and even today it has completed successfully as a background job itself .
I am doing an RCA on this, any sought of help would be appreciated.
Thank you

Hi,
Lets take a look at the help for the UPDATE command:
SY-SUBRC = 4 - At least one line was not able to be changed, either because no appropriate line was found, or because the change would generate a line that leads to double entries in the primary key or a unique secondary index in the database table.
To keep it simple I will assume the Z table does not have a unique secondary index. It is most likely that the update failed because the program tried to update a record that did not exist in the Z table. The best you can do is add reporting to the Z program so should the problem occur again you will know exactly why. You can do this by adding a SELECT statement that tries to read the record you are about to update and report an error if the record does not exist. To improve performance you could execute the SELECT after the UPDATE fails just to prove it is missing data.
Alternatively you could replace the UPDATE with a MODIFY statement so the record will be created if it does not already exist.

Can we Call Custom function in Background? VERY URGENT

Hi All,
Can one one tell me can we call a custom function module in background. Is it possible or not. If yes plz tell how.
In the custom function module I am updating a data base table using UPDATE statement. Can help me on this issue.
Thanks
Yathish

Hi,
1)
Yes..You can call a customer function module in BACKGROUND ...
Steps
1 Make the custom FM as remote enabled..
2 CALL FUNCTION 'ZFUNC' IN BACKGROUNG TASK
2) Yes..You can write UPDATE statement..
Thanks,
Naren

BDC Background Execution ------- Very Urgent

I have a report which has the filename as input parameter which has to upload the file from presentation server.
When i execute the report in foreground , it is displaying the output. But i cant seee the output when i execute the the report in back-ground mode.

Dear Manju,
Please go though the following lines of code:
D A T A D E C L A R A T I O N *
TABLES: ANEP,
BKPF.
TYPES: BEGIN OF TY_TABDATA,
MANDT LIKE SY-MANDT, " Client
ZSLNUM LIKE ZSHIFTDEPN-ZSLNUM, " Serial Number
ZASSET LIKE ZSHIFTDEPN-ZASSET, " Original asset that was transferred
ZYEAR LIKE ZSHIFTDEPN-ZYEAR, " Fiscal Year
ZPERIOD LIKE ZSHIFTDEPN-ZPERIOD, " Fiscal Period
ZSHIFT1 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 1
ZSHIFT2 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 2
ZSHIFT3 LIKE ZSHIFTDEPN-ZSHIFT1, " Shift No. 3
END OF TY_TABDATA.
Declaration of the Internal Table with Header Line comprising of the uploaded data.
DATA: BEGIN OF IT_FILE_UPLOAD OCCURS 0.
INCLUDE STRUCTURE ALSMEX_TABLINE. " Rows for Table with Excel Data
DATA: END OF IT_FILE_UPLOAD.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME,
BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: P_FNAME LIKE RLGRAP-FILENAME OBLIGATORY.
SELECTION-SCREEN: END OF BLOCK B2,
END OF BLOCK B1.
E V E N T : AT S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FNAME.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = '.'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
E V E N T : S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Upload Excel file into Internal Table.
PERFORM UPLOAD_EXCEL_FILE.
Organize the uploaded data into another Internal Table.
PERFORM ORGANIZE_UPLOADED_DATA.
E V E N T : E N D - O F - S E L E C T I O N *
END-OF-SELECTION.
*& Form UPLOAD_EXCEL_FILE
text
--> p1 text
<-- p2 text
FORM UPLOAD_EXCEL_FILE .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_FNAME
I_BEGIN_COL = 1
I_BEGIN_ROW = 3
I_END_COL = 7
I_END_ROW = 32000
TABLES
INTERN = IT_FILE_UPLOAD
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " UPLOAD_EXCEL_FILE
*& Form ORGANIZE_UPLOADED_DATA
text
--> p1 text
<-- p2 text
FORM ORGANIZE_UPLOADED_DATA .
SORT IT_FILE_UPLOAD BY ROW
COL.
LOOP AT IT_FILE_UPLOAD.
CASE IT_FILE_UPLOAD-COL.
WHEN 1.
WA_TABDATA-ZSLNUM = IT_FILE_UPLOAD-VALUE.
WHEN 2.
WA_TABDATA-ZASSET = IT_FILE_UPLOAD-VALUE.
WHEN 3.
WA_TABDATA-ZYEAR = IT_FILE_UPLOAD-VALUE.
WHEN 4.
WA_TABDATA-ZPERIOD = IT_FILE_UPLOAD-VALUE.
WHEN 5.
WA_TABDATA-ZSHIFT1 = IT_FILE_UPLOAD-VALUE.
WHEN 6.
WA_TABDATA-ZSHIFT2 = IT_FILE_UPLOAD-VALUE.
WHEN 7.
WA_TABDATA-ZSHIFT3 = IT_FILE_UPLOAD-VALUE.
ENDCASE.
AT END OF ROW.
WA_TABDATA-MANDT = SY-MANDT.
APPEND WA_TABDATA TO IT_TABDATA.
CLEAR: WA_TABDATA.
ENDAT.
ENDLOOP.
ENDFORM. " ORGANIZE_UPLOADED_DATA
In the subroutine --> ORGANIZE_UPLOADED_DATA, data are organized as per the structure declared above.
Regards,
Abir
Don't forget to award points *

Very urgent ----Background job

Hi all,
I had executed a Program in background, job got finished but there is one error log saying that
<b>No external transaction was assigned to internal transaction 0020 / 0010</b>
but when i debug in foreground,it is going to that error message line but not displaying the error message,
same case when i debug with sy-batch = 'X' also
only when i schedule ,it is showing that error message

Hi.
You have the possibility to debug a program as a job. For that you have to call transaction sm37 and display your job. When you mark your special job and type in the command jdbg (job-debugging) you are able to debug the program with all system-settings like the job-run.
In the first step you are (in the debugger) somewhere in standard-programs. When you press several times F7 you will come to your programm. An other possibility to get there is to set a breakpoint in your program.
Hope this helps.
Michael

Please help me in creating and scheduling jobs. Its very urgent.

RDBMS: Oracle 9.2.0.4
OS: win2k
OWB Client: 9.2.0.2.8
OWB Repository: 9.2.0.2.0
Hi,
I have created a "process workflow" using OWB and deployed it successfully. Now, I would like to schedule this process. I have installed management server and tried to schedule it but all in vain. I am not able to understand anything. I have read "oracle administrator pdf" and couldnt understand anything. Please dont advise me to read any notes or pdf's because I have tried a lot and was not able to figure out the configuration.
I have a target database named "TARGET". I would like to schedule the workflow process I have created. I am not able to understand preferred credentials and how to execute the XML script generated by the "process workflow". Please help me coz its very urgent.
-Aditya

Why dont you try this? I found it after few tries,
In the create job dialog box
under General
for Override Node Preferred Credentials for entire job
username and password should be the NT or Unix
login where your Runtime database Server reside.
under Parameter
for Override preferred credentials
username and password should be of your runtime
repository user
Regards,
Shree

Urgent : Want to know table stores spools created by a background job

Actually background job executed by me creates 2 spool requests
table - tbtcpv holds only the 1 spool
Can any one tell me the table which stores all the spool created by the background job ?
Need urgent help.....

Guru,
Try with below tables
TBTCO
TBTCO
TBTCP
TBTCR
TBTCS
TBTCJSTEP
TBTCO
TBTCP
Pls. reward if useful..

Please help me in creating jobs...very very urgent .

Hi,
I have created a "process workflow" using OWB and deployed it successfully. Now, I would like to schedule this process. I have installed management server and tried to schedule it but all in vain. I am not able to understand anything. I have read "oracle administrator pdf" and couldnt understand anything. Please dont advise me to read any notes or pdf's because I have tried a lot and was not able to figure out the configuration.
I have a target database named "TARGET". I would like to schedule the workflow process I have created. I am not able to understand preferred credentials and how to execute the XML script generated by the "process workflow". Please help me coz its very urgent.
-Aditya

I think in this forum will be help more than in this forum regarding this topic.
Warehouse Builder
http://forums.oracle.com/forums/index.jsp?cat=16
Joel P�rez

Urgent..How to delete background job permanently....!

Guru's!
How do i track that background job... that is running for every 5 mins,
In sm37 i know the job name , it is executing for every 5 mins, and that is interrupting , and causing me huge prblm.
my basis person suspended the job , but that is started executing again from yesday.
I found that job name in sm37 like below
BI_WRITE_PROT_TO_APPLLOG,
more than that m not getting any additional info abt it..
I can say this is the job that is interrupting R3 transaction
Guys pls advise me How do i get related info abt taht job...
n pls provide me sol'n to delete it permanently..........
Thanks
Srujan

HI,
Report - RSBATCH_WRITE_PROT_TO_APPLLOG is shceduled in BW every particular minutes to write an application log ,this report is having job name BI_WRITE_PROT_TO_APPLLOG .
This report must neither be descheduled nor deleted, as long as BW is working live, because otherwise any error messages that appear are not written to the application log.
This log files can grow large (intensive read on table
TBTCO and TBTCB ),especially logs from Job BI_WRITE_PROT_TO_APPLLOG and might impact some of the performances like system slow down.
Check unused Job logs with Report RSBTCDEL2 and clean out if
and see this posts,
Re: Issue regarding BI_WRITE_PROT_TO_APPLLOG
notes:769414
if it is useful assign points
Regards,
Senthil

Background job fails for BDC profile creation and role assignment

Hi Experts,
I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
Below is the process of job
   1. ZMIS_AUTH_OBJECT_CREATE
       Variant : auth-create
   2. ZMIS_AUTH_ASSIGN_TO_ROLE
       Variant : auth-assign
The problem is in second program, runs in foreground but fails in background.
Code which i have written in my second program
***BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message.
***Generation of Profile created
CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14 .
Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
Regards,
Chetan

Hi Praveen,
Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
To achieve this i have written two programs
1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
"" Creation of Authorization Object
CALL FUNCTION 'ZAUTHOBJ'
        EXPORTING
         ctu                    = 'X'
         mode                   = p_mode
         UPDATE                 = 'L'
*   GROUP                  =
*   USER                   =
*   KEEP                   =
*   HOLDDATE               =
         nodata                 = '/'
         g_authname_001         = 'ZDUMMY_MIS'
          g_targetauth_002       = wa_tab-auth
          g_authtxt_003          = wa_tab-short_desc
          g_authtxtmd_004        = wa_tab-med_desc
         marked_04_005          = 'X'
          g_authtxt_006          = wa_tab-short_desc
          g_authtxtmd_007        = wa_tab-med_desc
         tctiobjnm_04_008       = 'ZBUS_UNIT'
          g_authtxt_009          = wa_tab-short_desc
          g_authtxtmd_010        = wa_tab-med_desc
         marked_05_011          = ''
         opt_01_012             = 'EQ'
          low_01_013             = wa_tab-bu
          g_authtxt_014          = wa_tab-short_desc
          g_authtxtmd_015        = wa_tab-med_desc
         marked_04_016          = 'X'
          g_authtxt_017          = wa_tab-short_desc
          g_authtxtmd_018        = wa_tab-med_desc
         tctiobjnm_04_019       = 'ZCONTRCT'
          g_authtxt_020          = wa_tab-short_desc
          g_authtxtmd_021        = wa_tab-med_desc
         marked_05_022          = ''
         opt_01_023             = 'EQ'
          low_01_024             = lv_contract
          g_authtxt_025          = wa_tab-short_desc
          g_authtxtmd_026        = wa_tab-med_desc
          g_authtxt_027          = wa_tab-short_desc
          g_authtxtmd_028        = wa_tab-med_desc
          g_authname_029         = wa_tab-auth
* IMPORTING
*   SUBRC                  =
       TABLES
         messtab                = temp_message.
"" Creation of role
LOOP AT it_role INTO wa_role.
      CLEAR wa_text.
      wa_text-text = wa_role-desc.
      wa_text-langu = 'E'.
      APPEND wa_text TO it_text.
      wa_jobrole-agr_name = wa_role-role_name.
      wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
      wa_method-usmethod = 'CHANGE'.
      CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
        EXPORTING
          jobrole          = wa_jobrole
         parent           = wa_parentrole
         method           = wa_method
       TABLES
*   RETURN           =
         shorttext     = it_text
*   LONGTEXT         =
*   MENU_NODES       =
*   MENU_TEXTS       =.
    ENDLOOP.
2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
""*BDC for Profile creation and assignment to Roles
    CALL FUNCTION 'ZROLE'
      EXPORTING
       ctu                     = 'X'
       mode                    = p_mode
       UPDATE                  = 'L'
*   GROUP                   =
*   USER                    =
*   KEEP                    =
*   HOLDDATE                =
       nodata                  = '/'
        agr_name_neu_001        = wa_role-role_name
        text_002                = wa_role-desc
        text_003                = wa_role-desc
        text_004                = wa_role-desc
       value_01_005            = 'T-ML330881'
        h_fval_low_01_006       = wa_role-auth
        profn_007               = lv_profile
        ptext_008               = lv_text1
* IMPORTING
*   SUBRC                   =
     TABLES
       messtab                 = temp_message .
   COMMIT WORK AND WAIT.
""*Generation of Profile created
LOOP AT it_role INTO wa_role.
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
     EXPORTING
       activity_group                      = wa_role-role_name
*     PROFILE_NAME                        =
*     PROFILE_TEXT                        =
      no_dialog                           = ' '
      rebuild_auth_data                   = ''
      org_levels_with_star                = ' '
      fill_empty_fields_with_star         = 'X'
      template                            = ' '
      check_profgen_tables                = 'X'
      generate_profile                    = 'X'
      authority_check_pfcg                = 'X'
   EXCEPTIONS
     activity_group_does_not_exist       = 1
     activity_group_enqueued             = 2
     profile_name_exists                 = 3
     profile_not_in_namespace            = 4
     no_auth_for_prof_creation           = 5
     no_auth_for_role_change             = 6
     no_auth_for_auth_maint              = 7
     no_auth_for_gen                     = 8
     no_auths                            = 9
     open_auths                          = 10
     too_many_auths                      = 11
     profgen_tables_not_updated          = 12
     error_when_generating_profile       = 13
     OTHERS                              = 14
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDLOOP.
For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
Regards,
Chetan

Very urgent:To find IDOC list in RSMO(BI 7.0)

Hi all,
Its very urgent to know,for a particular load IDOCs used to run to process the data&dialogs,in 3.5 we used to get the IDOCs list in RSMO screen itself,but in 7.0 is not having that options,please tell me for a particular load where we can find list of IDOCs?
Regards,
GTR.

Hi,
This info may be helpful.
Transact RFC error
tRFC Error - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
queue thats under outbound processing and click on display the IDOC which is on the menu bar.
Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
(Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
to the particular TRFC request for that Idoc.
OR
Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
(For this in RSMO Screen> Environment> there is a option for Job overview.)
This Data Package TID is Transaction ID in SM58.
OR
SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
Transaction ID.
In the Status Text column you can see two status
Transation Recorded and Transaction Executing
Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
execute the "Execute LUWs"
OR
Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
EDIT ---> Execute LUW
Also
Check Note 561880 - Requests hang because IDocs are not processed.
thanks,
JituK

Debug background job program

Hi,
i am debugging the program in background mode,
first time i was successful in capturing the job,
second time it is giving error, capture job is failed.
sm37 , jdbg also not working, its given error like bebuggin is not possible in active mode.
in sm50 transaction, it is giving some information message like user reached maxium debugging modes. some error.
please help me, it is very urgent
thanks in advance
points will be rewarded

Hi,
change source code in a way like this:
DATA:
stop_for_capture.
DO.
IF sy-uname NE 'HABICH'. "change to your account
EXIT.
ENDIF.
IF NOT stop_for_capture IS INITIAL.
EXIT.
ENDIF.
ENDDO.
So you have enough time to capture.
proceed by changing value stop_for_capture.
regards
Walter Habich
Edited by: Walter Habich on May 23, 2008 9:56 AM

Failed to Run OLE Excel program in background JOB (SM36)

Please help.
I have write a program to use OLE to create a Excel file.
The program can run successful in front end workstation. However, when I run the program in background job by SM36.
The statement "CREATE OBJECT EXCEL 'EXCEL.APPLICATION'" return with error "SY-SUBRC = 2".
How can I solve it ?
Can OLE Excel be run on background job ?
Thanks so much,
Mark

Hi Mark:
Your need is a very common one. I also was asked to generate an Excel in Background.
It is not possible to work with OLE in background mode.
The reason is: In background mode there is no presentation server. OLE is executed in presentation server.
Below I paste the code I wrote to solve my problem.
This class sends a mail with an excel attached. The Excel content will be the internal table you pass to the class. But the Excel is not binary, it is a plain text file, separated by tabulators. Anyway, when you open it with Excel, the columns are properly shown.
Sorry. Comments are in spanish, I don't have time to translate it.
I kindly ask to everybody which want to use it to keep my name in the code.
* Autor: Jordi Escoda, 30/10/2008.
* Descripción: Esta clase genera un correo electrónico destinado a
* una persona, adjuntando el contenido de una tabla interna como
* Excel (campos separados por tabuladores).
* La virtud de esta clase es su sencillez de utilización. Para lanzar
* el mail con el excel adjunto basta con declarar la tabla interna,
* llenarla, colocar el asunto del mensaje, el destinatario, el nombre
* del excel adjunto, y pasar la tabla interna.
* Ejemplo de utilización:
* DATA: lc_mail TYPE REF TO cl_mail_builder_xls_attach.
* DATA: lt_anla TYPE STANDARD TABLE OF anla.
*    SELECT * INTO TABLE lt_anla FROM anla.
*    CREATE OBJECT lc_mail.
*    CALL METHOD lc_mail->set_subject( 'Excel adjunto' ).
*    CALL METHOD lc_mail->set_recipient( 'XXX@XXXDOTCOM' ).
*    CALL METHOD lc_mail->set_attach_filename( 'ANLA' ).
*    APPEND 'Cuerpo del mensaje' TO lt_body.
*    APPEND 'Saludos cordiales' TO lt_body.
*    CALL METHOD lc_mail->set_bodytext( lt_body ).
*    CALL METHOD lc_mail->set_attach_table( lt_anla ).
*    CALL METHOD lc_mail->send( ).
*       CLASS cl_mail_builder_xls_attach DEFINITION
CLASS cl_mail_builder_xls_attach DEFINITION.
PUBLIC SECTION.
    METHODS: set_subject
                           IMPORTING im_subject TYPE so_obj_des,
             set_bodytext
                           IMPORTING im_body TYPE bcsy_text,
             set_recipient
                           IMPORTING im_recipient TYPE ad_smtpadr,
             set_attach_table
                           IMPORTING im_table TYPE ANY TABLE,
             set_attach_filename
                           IMPORTING im_attach_name TYPE sood-objdes,
             send.
PRIVATE SECTION.
    CONSTANTS:
      c_tab TYPE c VALUE cl_bcs_convert=>gc_tab,
      c_crlf TYPE c VALUE cl_bcs_convert=>gc_crlf,
      c_singlequote TYPE c VALUE '.
    DATA: l_recipient_addr TYPE ad_smtpadr.
    DATA: send_request   TYPE REF TO cl_bcs,
          document       TYPE REF TO cl_document_bcs,
          recipient      TYPE REF TO if_recipient_bcs,
          bcs_exception TYPE REF TO cx_bcs.
    DATA: binary_content TYPE solix_tab,
          size           TYPE so_obj_len.
    DATA: l_string TYPE string,
          l_body_text TYPE bcsy_text,
          l_subject TYPE so_obj_des,
          l_attach_name TYPE sood-objdes.
    METHODS: create_binary_content,
             get_dataelement_medium_text
                    IMPORTING im_table_name TYPE tabname
                              im_field_name TYPE fieldname
                    EXPORTING ex_medium_text TYPE scrtext_m.
ENDCLASS.                    "cl_mail_builder_xls_attach DEFINITION
*       CLASS cl_mail_builder_xls_attach IMPLEMENTATION
CLASS cl_mail_builder_xls_attach IMPLEMENTATION.
METHOD set_bodytext.
    l_body_text[] = im_body[].
ENDMETHOD.                    "add_bodytext
METHOD set_subject.
    l_subject = im_subject.
ENDMETHOD.                    "add_subject
METHOD set_attach_filename.
    l_attach_name = im_attach_name.
ENDMETHOD.                    "add_subject
METHOD set_recipient.
    l_recipient_addr = im_recipient.
ENDMETHOD.                    "add_subject
METHOD set_attach_table.
*   Rellena en un string el contenido de la tabla interna recibida
    DATA: ref_to_struct TYPE REF TO cl_abap_structdescr.
    DATA: my_like TYPE fieldname,
          nombretabla TYPE tabname,
          nombrecampo TYPE fieldname,
          texto_mediano TYPE scrtext_m.
    DATA: l_idx TYPE i,
          l_valorcampo(16) TYPE c,
          l_long TYPE i.
    FIELD-SYMBOLS: <fs_linea> TYPE ANY,
                   <fs_campo> TYPE ANY.
    FIELD-SYMBOLS: <comp_descr> TYPE abap_compdescr.
    CHECK NOT im_table[] IS INITIAL.
*   Línea con los nombres de las columnas.
    CLEAR l_string.
    LOOP AT im_table ASSIGNING <fs_linea>.
*     Toma los atributos del componente
      ref_to_struct =
                 cl_abap_structdescr=>describe_by_data( <fs_linea> ).
      LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
        ASSIGN COMPONENT <comp_descr>-name
                            OF STRUCTURE <fs_linea> TO <fs_campo>.
*       Obtenemos el origen de donde proviene (like). Ej:BKPF-BUDAT
        DESCRIBE FIELD <fs_campo> HELP-ID my_like.
        SPLIT my_like AT '-' INTO nombretabla nombrecampo.
        CALL METHOD get_dataelement_medium_text
          EXPORTING
            im_table_name = nombretabla
            im_field_name = nombrecampo
          IMPORTING
            ex_medium_text = texto_mediano.
        IF texto_mediano IS INITIAL.
          CONCATENATE l_string <comp_descr>-name INTO l_string.
        ELSE.
          CONCATENATE l_string texto_mediano INTO l_string.
        ENDIF.
        AT LAST.
          CONCATENATE l_string c_crlf INTO l_string.
          EXIT.
        ENDAT.
        CONCATENATE l_string c_tab INTO l_string.
      ENDLOOP.
      EXIT.
    ENDLOOP.
*   Contenido de la tabla
    LOOP AT im_table ASSIGNING <fs_linea>.
*     Toma los atributos del componente
      ref_to_struct =
                 cl_abap_structdescr=>describe_by_data( <fs_linea> ).
      LOOP AT ref_to_struct->components ASSIGNING <comp_descr>.
*       Asignamos el componente ue tratamos, para obtener
*       el valor del mismo
        ASSIGN COMPONENT <comp_descr>-name OF STRUCTURE <fs_linea>
                                        TO <fs_campo>.
        CASE <comp_descr>-type_kind.
          WHEN 'P'. "Packed Number
*           Convierte a caracter
            WRITE <fs_campo> TO l_valorcampo.
            CONCATENATE l_string l_valorcampo INTO l_string.
          WHEN OTHERS.
            l_long = STRLEN( <fs_campo> ).
            IF l_long > 11 AND <fs_campo> CO ' 0123456789'.
*             El Excel muestra un número tal como 190000000006
*             en formato 1,9E+11.
*             Para eviarlo, los números de más de 11 dígitos los
*             concatenamos con comillas simples.
              CONCATENATE l_string c_singlequote
                          <fs_campo> c_singlequote INTO l_string.
            ELSE.
              CONCATENATE l_string <fs_campo> INTO l_string.
            ENDIF.
        ENDCASE.
        AT LAST.
*         Añade CRLF
          CONCATENATE l_string c_crlf INTO l_string.
          EXIT.
        ENDAT.
*       Añade tabulador
        CONCATENATE l_string c_tab INTO l_string.
      ENDLOOP.
    ENDLOOP.
    create_binary_content( ).
ENDMETHOD.                    "set_attach_table
METHOD create_binary_content.
    DATA: l_size TYPE so_obj_len.
*   convert the text string into UTF-16LE binary data including
*   byte-order-mark. Mircosoft Excel prefers these settings
*   all this is done by new class cl_bcs_convert (see note 1151257)
    TRY.
        cl_bcs_convert=>string_to_solix(
          EXPORTING
            iv_string   = l_string
            iv_codepage = '4103' "suitable for MS Excel, leave empty
            iv_add_bom = 'X'     "for other doc types
          IMPORTING
            et_solix = binary_content
            ev_size   = size ).
      CATCH cx_bcs.
        MESSAGE e445(so).
    ENDTRY.
ENDMETHOD.                    "create_binary_content
METHOD send.
    DATA: l_sent_to_all TYPE os_boolean.
    TRY.
*       create persistent send request
        send_request = cl_bcs=>create_persistent( ).
*       create and set document with attachment
*       create document object
        document = cl_document_bcs=>create_document(
          i_type    = 'RAW'
          i_text    = l_body_text
          i_subject = l_subject ).
*       add the spread sheet as attachment to document object
        document->add_attachment(
          i_attachment_type    = 'xls'
          i_attachment_subject = l_attach_name
          i_attachment_size    = size
          i_att_content_hex    = binary_content ).
*       add document object to send request
        send_request->set_document( document ).
*       add recipient (e-mail address)
        recipient =
           cl_cam_address_bcs=>create_internet_address(
                                      l_recipient_addr ).
*       add recipient object to send request
        send_request->add_recipient( recipient ).
*       send document
        l_sent_to_all = send_request->send(
                             i_with_error_screen = 'X' ).
        COMMIT WORK.
        IF l_sent_to_all IS INITIAL.
          MESSAGE i500(sbcoms) WITH l_recipient_addr.
        ELSE.
          MESSAGE s022(so).
        ENDIF.
      CATCH cx_bcs INTO bcs_exception.
        MESSAGE i865(so) WITH bcs_exception->error_type.
    ENDTRY.
ENDMETHOD.                    "lcl_mail_xls_attachment
METHOD get_dataelement_medium_text.
    DATA: lt_fld_info TYPE STANDARD TABLE OF dfies,
      wa_fld_info TYPE dfies.
*   Busca en el diccionario los datos del campo
    CALL FUNCTION 'DDIF_FIELDINFO_GET'
      EXPORTING
        tabname        = im_table_name
        fieldname      = im_field_name
        langu          = sy-langu
      TABLES
        dfies_tab      = lt_fld_info
      EXCEPTIONS
        not_found      = 1
        internal_error = 2
        OTHERS         = 3.
    CLEAR ex_medium_text.
    IF sy-subrc = 0.
      READ TABLE lt_fld_info INDEX 1 INTO wa_fld_info.
*     Si lo ha podido tomar del diccionario...
      IF NOT wa_fld_info-scrtext_m IS INITIAL.
*       Toma el nombre del nombre de campo del diccionario
        ex_medium_text = wa_fld_info-scrtext_m.
      ENDIF.
    ENDIF.
ENDMETHOD.                    "get_dataelement_medium_text
ENDCLASS.                    "cl_mail_builder_xls_attach IMPLEMENTATION

Background job in APO does not start because of invalid user name

Hello,
I have a macro in a planning book and the /sapapo/cons_check program which a triggered via a background job. Now, I have problems with the start of the job:
At the time the job was created inside SAP, an error occured. The job contains invalid values.
The user name within the job does not exist any more.
Now, I try to change the user name of the job (via step in sm37), but the error occured again.
I have the possibility to create the invalid user name once again in su01.
But I want to change the user name of the job - does somebody know how to do it?
Thanks for your help!
Kind regards
Heinz

Hello Heinz, this looks surprising.
It's quite easy to change the user name in the SM37 job step, and we haven't faced issues with this.
Could you check how many jobs are in either "scheduled" or in "released" status, and change steps for all of them? May be you changed the scheduled job, but the released job wasn't changed.
Use your job name and give a search date as 1-2 years in the past, and around 1 month in the future. With this time horizon, you should most likely be able to capture all the relevant jobs having the same name that you are using.
Now change the user name in step for all the jobs received above to be fully sure.
One more trial could be to copy the current scheduled job to another job, modify the user name in this newly created job and then delete the old one.
One of the above trials might possibly help you in some way, else its very tough to understand/explain your situation.
Thanks - Pawan

Background Job Scheduling

Hi,
I am scheduling a report to run in background.
In this report it is creating background jobs automatically for different company codes.
It submits the 1st background job and waits until it finishes.
Then 2nd job starts in background and continues with other jobs.
At end it finishes all the jobs and closes.
Now my problem is.
1.       Whether is it possible for us to submit all the jobs at 1 time. And execute at same time. Ie., 1st, 2nd job will start at same time.
2.       If possible how can we do that.
What I have written is
loop at companycode.
Create job name.
call fun 'Job_Open'.
submit xxxx user sy-uname via job job_name numer job_count
to sap-spool
spool parameters l_spool_parameter
without spool dynpro
with companycode
with ......
and return.
endloop.
Please help ASAP, urgent.

hi praveen,
Job Scheduling Explained
Definition
Before any background processing can actually begin, background jobs must be defined and scheduled. The scheduled time for when a job runs is one part of the jobs definition. There are several ways to schedule jobs:
From Transaction SM36 (Define Background Job)
With the "start program in the background" option of either Transaction SA38 (ABAP: Execute Program) or Transaction SE38 (the ABAP editor)
Through the background processing systems own programming interface. (Many SAP applications use the internal programming interface to schedule long-running reports for background processing.)
Through an external interface.
Scheduling Background Jobs
Use
You can define and schedule background jobs in two ways from the Job Overview:
·         Directly from Transaction SM36. This is best for users already familiar with background job scheduling.
·         The Job Scheduling Wizard. This is best for users unfamiliar with SAP background job scheduling. To use the Job Wizard, start from Transaction SM36, and either select Goto ® Wizard version or simply use the Job Wizard button.
Procedure
       1.      Call Transaction SM36 or choose CCMS ® Jobs ® Definition.
       2.      Assign a job name. Decide on a name for the job you are defining and enter it in the Job Name field.
       3.      Set the jobs priority, or Job Class:
·         High priority:      Class A
·         Medium priority: Class B
·         Low priority: Class C
       4.      In the Target server field, indicate whether to use system load balancing.
·         For the system to use system load balancing to automatically select the most efficient application server to use at the moment, leave this field empty.
·         To use a particular application server to run the job, enter a specific target server.
       5.      If spool requests generated by this job are to be sent to someone as email, specify the email address. Choose the Spool list recipient button.
       6.      Define when the job is to start by choosing Start Condition and completing the appropriate selections. If the job is to repeat, or be periodic, check the box at the bottom of this screen.
       7.      Define the jobs steps by choosing Step, then specify the ABAP program, external command, or external program to be used for each step.
       8.      Save the fully defined job to submit it to the background processing system.
       9.      When you need to modify, reschedule, or otherwise manipulate a job after you've scheduled it the first time, you'll manage jobs from the Job Overview.
Note: Release the job so that it can run. No job, even those scheduled for immediate processing, can run without first being released.
Specifying Job Start Conditions
Use
When scheduling a background job (either from Transaction SM36, Define Background Job or CCMS ® Jobs ® Definition), you must specify conditions that will trigger the job to start.
Procedure
Choose the Start condition button at the top of the Define Background Job screen.
Choose the button at the top of the Start Time screen for the type of start condition you want to use (Immediate, Date/Time, After job, After event, or At operation mode) and complete the start time definition in the screen that appears.
For the job to repeat, check the Periodic job box at the bottom of the Start Time screen and choose the Period values button below it to define the frequency of repetition (hourly, daily, weekly, monthly, or another specific time-related period). Then choose the Save button in the Period values screen to accept the periodicity and return to the Start Time screen.
Once youve completed specifying the job start conditions, choose the Save button at the bottom of the Start Time screen to return to the Define Background Job screen.
No job can be started until it is released, including jobs scheduled to start immediately. Since releasing jobs can be done only by a system administrator from the job management screen (Transaction SM37) or by other users who have been granted the appropriate Authorizations for Background Processing, no unauthorized user can start a job without explicit permission
Managing Jobs from the Job Overview
Use
The Job Overview, or Job Maintenance, screen is the single, central area for completing a wide range of tasks related to monitoring and managing jobs, including defining jobs; scheduling, rescheduling, and copying existing jobs; rescheduling and editing jobs and job steps; repeating a job; debugging an active job; reviewing information about a job; canceling a job's release status; canceling and deleting jobs; comparing the specifications of several jobs; checking the status of jobs; reviewing job logs; and releasing a job so it can run.
Procedures
To display the Job Overview screen, choose CCMS ® Jobs ® Maintenance or call Transaction SM37. Before entering the Job Overview screen, the system first displays the Select Background Jobs screen. You'll need to complete this Job Selection screen to define the criteria for the jobs you want to manage. Once you've selected jobs to manage, you can choose from a wide range of management tasks:
To copy a single existing job, choose Job ® Copy.
To reschedule or edit job steps or attributes of a single job, choose Job ® Change. A job step is an independent unit of work within a background job. Each job step can execute an ABAP or external program. Other variants or authorizations may be used for each job step. The system allows you to display ABAP programs and variants. You can scan a program for syntax errors. You can also display the authorizations for an authorized user of an ABAP job step.
To repeat a single job, choose Job ® Repeat scheduling.
To debug an active job, choose Job ® Capture: active job. Only a single selection is allowed. If an active job seems to be running incorrectly (e.g., running for an excessively long time), you can interrupt and analyze it in debugging mode in a background process, and then either release it again or stop it altogether.
You will be able to capture a background job only if you are logged on to the SAP server on which the job is running. To find server information in the Job Overview, select and mark the job, then choose Job ® Job details.
To review information about a job, choose Job ® Job details. Details displayed can include:
current job status
periodicity, or the repetition interval
other jobs linked to the current job, either as previous or subsequent jobs
defined job steps
spool requests generated by the current job
To cancel a job's "Released" status, select the job or jobs from the Job Overview list and choose Job ® Release -> Scheduled.
To cancel a job from running but keep the job definition available, select the job or jobs from the Job Overview list and choose Job ® Cancel active job.
To delete a job entirely, select the job or jobs from the Job Overview list and choose Job ® Delete. Jobs with the status of Ready or Running cannot be deleted.
To compare the specifications of more than one job, select the jobs from the Job Overview list and choose Job ® Compare jobs.
To check the status of jobs, select the job or jobs from the Overview Job list and choose Job ® Check status. This allows you to either change the job status back to Planned or cancel the job altogether. This is especially useful when a job has malfunctioned.
To review job logs, select a job or jobs with the status Completed or Canceled from the Job Overview list and
regards
karthik
reward me points if helpfull

Background Job ..... VERY URGENT

Similar Messages

Maybe you are looking for