Backspace navigation key not working in web browser using linux, but does on windoze

using ubuntu 10.04 (lucid). when navigating a web forum, the backspace key (previous page) does not function. the scroll keys are a little jerky too. i have both 'use navigation keys' and 'smooth scrolling' enabled in options.

See http://kb.mozillazine.org/browser.backspace_action

Similar Messages

F10 Key not working in Web Browser mode

I created a click box on a CP5 screen and assigned F10 as the Shortcut key and the action is "Go to the next slide." When the user presses F10 the demo would advance to the next screen.
This works great in preview mode. However, when in Web Browser mode, nothing happens except I get this message at the bottom of the screen, "Contains commands for working with selected item."
How do I get the F10 key to work (action desired: advance to the next screen in my demo) in browser mode?

Hi there
LIkely it depends on the browser, but some keys are always reserved for use by the browser itself and they cannot be used as shortcut keys by a Captivate SWF because the browser will intercept them and not pass them on to the SWF.
I'm not sure if F10 is among those keys, but it may well be.
This would likely beg the question of why Captivate would allow you to assign a shortcut key if if wouldn't work when you publish and play in the browser. And for that I would remind you that SWF output is just one of the ouputs Captivate may produce. If you published as EXE, you aren't bound by browser behavior and the key would likely work just dandy.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Javascript does not work in web browser

Hello friends.
I have a problem with javascript in my Captivate project.
This script only works in preview in Captivate, but does not work in web browser (IE 9, Mozilla, Chrome).
Anybody knows why?
Thank you for your answers.

Common JS interface
That is the official documentation for JS in Captivate 8. For more information, have a look at Jim Leichliter's website: CaptivateDev.com - eLearning Development with Adobe Captivate

Creative Zen Vision 30GB - How to set IR Remote ON with Navigation keys not working in the play

I have Creative Zen Vision 30GB player. Within a month of buying, its navigation keys stopped working. I took it to the customer service of store where I bought it and they fixed it (their solution was to make firmware update, even though I do not understand how come that can fix this issue). Anyways after another 5 months of not so often use, the same problem returned (key pad stopped working and without it this player is useless). I sent it to Creative and they returned it saying that as it has few scratches on the edges, they believe it has been hit. I never dropped the player and these are normal scratches at the end if you do not use any skin (which I could never find for this player). Btw from my other friend's experiences, Creative always does like this, never considered warranty (so beware!). Anyways now the problem is that I have IR remote for Zen vision but it can not work till IR Remote setting in System->Player Settings is switched ON. And this can not be done as the navigation keys are not working. So please please suggest me some other way if anybody of you know to enable this setting through software. Otherwise this costly player is just a 30GB harddisk for me

Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Swing components in applet not working in web browser

Hi Guys,
I've created an applet which makes use of some swing components, but unfortunately, not all of them function properly in my web browser (internet explorer or Mozilla Firefox). Its mainly the buttons; the last buttons works and displays the correct file within the broswer, but the first 5 buttons do not work...
any help please on how I can sort this problem out?
Heres the code for my applet:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.*;
public class MainAppWindow extends JApplet
int gapBetweenButtons = 5;
final JPanel displayPanel = new JPanel(new BorderLayout());
public void init()
   //Panel for overall display in applet window.
   JPanel mainPanel = new JPanel(new BorderLayout());
   mainPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/smalllogo2.gif"))),BorderLayout.NORTH);
   //sub mainPanel which holds all mainPanels together.
   JPanel holdingPanel = new JPanel(new BorderLayout());
   //Panel for displaying all slide show and applications in.
   displayPanel.setBackground(Color.white);
   displayPanel.add(new JLabel(new ImageIcon(getClass().getResource("images/IntroPage.jpg"))),BorderLayout.CENTER);
   displayPanel.setPreferredSize(new Dimension(590,400));
   JPanel buttonPanel = new JPanel(new GridLayout(6,1,0,gapBetweenButtons));
   buttonPanel.setBackground(Color.white);
   JButton button1 = new JButton("User guide");
   button1.addActionListener(
     new ActionListener() {
          public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll(); // If there are any components in the mainPanel, remove them and then add label
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/UserGuide.jpg")));
               displayPanel.revalidate(); // Validates displayPanel to allow changes to occur onto it, allowing to add different number images/applicaions to it.
   JButton button2 = new JButton("What is a Stack?");
   button2.addActionListener(
   new ActionListener() {
           public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/WhatIsAStack.jpg")));
               displayPanel.revalidate();
   JButton button3 = new JButton("STACK(ADT)");
   button3.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StackADT.jpg")));
               displayPanel.revalidate();
   JButton button4 = new JButton("Stacks in the Real World");
   button4.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
               if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
               displayPanel.setBackground(Color.white);
               displayPanel.add(new JLabel(new ImageIcon("images/StacksInTheRealWorld.jpg")));
               displayPanel.revalidate();
   JButton button5 = new JButton("DEMONSTRATION");
   button5.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
             if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
             Demonstration app = new Demonstration();
             JPanel appPanel = app.createComponents();//gets the created components from Demonstration application.
             appPanel.setBackground(Color.pink);
           displayPanel.add(appPanel);
           displayPanel.revalidate();
   JButton button6 = new JButton("Towers Of Hanoi");
   button6.addActionListener(
   new ActionListener() {
         public void actionPerformed(ActionEvent e)
                 if(displayPanel.getComponents().length > 0)displayPanel.removeAll();
                 TowerOfHanoi app = new TowerOfHanoi();
                 JPanel appPanel = app.createComponents();//gets the created components from Towers of Hanoi
                 JPanel mainPanel = new JPanel();//panel used to centralise the application in center
                 mainPanel.add(appPanel);
                 mainPanel.setBackground(Color.pink); //sets mainPanel's background color for 'Towers Of Hanoi'
                 displayPanel.add(mainPanel);
                 displayPanel.revalidate();
   //adding buttons to the buttonPanel.
   buttonPanel.add(button1);
   buttonPanel.add(button2);
   buttonPanel.add(button3);
   buttonPanel.add(button4);
   buttonPanel.add(button5);
   buttonPanel.add(button6);
   JPanel p = new JPanel(); // Used so that the buttons maintain their default shape
   p.setBackground(Color.white);
   p.add(buttonPanel);
   holdingPanel.add(p,BorderLayout.WEST);
   holdingPanel.add(displayPanel,BorderLayout.CENTER);
   //Positioning of holdingPanel in mainPanel.
   mainPanel.add(holdingPanel,BorderLayout.CENTER);
   //indent mainPanel so that its not touching the applet window frame.
   mainPanel.setBorder(BorderFactory.createEmptyBorder(10,20,10,20));
   mainPanel.setBackground(Color.white);
   mainPanel.setPreferredSize(new Dimension(850,600)); //size of applet window
   mainPanel.setOpaque(false); // Needed for Applet
   this.setContentPane(mainPanel);
}

Thanks for the response. I don't quite understand what you're talking about though. I have, in my humble knowledge, done nothing with packages. I have put the applet class (WiaRekenToolActiz.class is the applet class) in the jar file wia_actiz_archive.jar. From what I read on the tutorial, java looks for the applet class in all the jar files specified. Since I put my CODEBASE as the main url, I thought it baiscally didn't matter where you out the html file.
I shall include the complete html page complete with applet tag to perhaps illuminate a bit more what I mean...
<html>
<head>
<title>Wia Rekenmodule hello!</title>
</head>
<body bgcolor="#C0C0C0">
<applet
CODEBASE= "http://www.creativemathsolutions.nl/test"
ARCHIVE= "Actiz/wia_actiz_archive.jar, Generic/wia_archive.jar"
CODE="WiaRekenToolActiz.class"
WIDTH=915 HEIGHT=555
>
<PARAM NAME = naam VALUE = "Piet Janssen">
<PARAM NAME = gebdag VALUE = "01">
<PARAM NAME = gebmaand VALUE = "06">
<PARAM NAME = gebjaar VALUE = "1970">
<PARAM NAME = geslacht VALUE = "man">
<PARAM NAME = dienstjaren VALUE = "10">
<PARAM NAME = salaris VALUE = "56500">
<PARAM NAME = deeltijdpercentage VALUE = "100">
<PARAM NAME = accountnaam VALUE = "Zorginstelling 'De Zonnebloem'">
</applet>
</body>
</html>

Urgent!!! Forms not work on web browser(OAS 10g,Solaris 10 x86).

Problem discribe:
1.environment:
(1)Network: only local network.
(2)Platforms
All platforms we use are Solaris 10 for X86.
(2.1)Server: (intel) Solaris 10 for X86
Oracle Application Server Forms Services 10.1.2.0.2
(2.2)Client: Mozolla web browser on (intel) Solaris 10 for X86 .
Mozolla web browser information:
(2.2.1)[menu]-[Help]-[About web browser]display:
Welcome to Mozilla 1.7 for Sun Java(TM) Desktop System
Mozilla/5.0 (X11; U; SunOS i86pc; zh-CN; rv:1.7) Gecko/20070606
(2.2.2)[menu]-[Help]-[About Plug-in]display:
Java(TM) Plug-in 1.5.0_12-b04
file name： libjavaplugin_oji.so
Java(TM) Plug-in 1.5.0_12
MIME type
application/x-java-vm Java
application/x-java-applet Java
application/x-java-applet;version=1.1 Java
application/x-java-applet;version=1.1.1 Java
application/x-java-applet;version=1.1.2 Java
application/x-java-applet;version=1.1.3 Java
application/x-java-applet;version=1.2 Java
application/x-java-applet;version=1.2.1 Java
application/x-java-applet;version=1.2.2 Java
application/x-java-applet;version=1.3 Java
application/x-java-applet;version=1.3.1 Java
application/x-java-applet;version=1.4 Java
application/x-java-applet;version=1.4.1 Java
application/x-java-applet;version=1.4.2 Java
application/x-java-applet;version=1.5 Java
application/x-java-applet;jpi-version=1.5.0_12 Java
application/x-java-bean Java
application/x-java-bean;version=1.1 Java
application/x-java-bean;version=1.1.1 Java
application/x-java-bean;version=1.1.2 Java
application/x-java-bean;version=1.1.3 Java
application/x-java-bean;version=1.2 Java
application/x-java-bean;version=1.2.1 Java
application/x-java-bean;version=1.2.2 Java
application/x-java-bean;version=1.3 Java
application/x-java-bean;version=1.3.1 Java
application/x-java-bean;version=1.4 Java
application/x-java-bean;version=1.4.1 Java
application/x-java-bean;version=1.4.2 Java
application/x-java-bean;version=1.5 Java
application/x-java-bean;jpi-version=1.5.0_12 Java
2.Install Config:
(2.1)formsweb.cfg
after install,
/export/home/ias/OraHome_2/forms/server/formsweb.cfg
include a section :
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
(2.2)run oracle test form and my forms
http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
(Oracle simple test demo form)
or
tttp://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
(2.3)browser dialogue window display:
[title:Default Plugin]
This page contains information of a type (application/x-java-applet;jpi-version=1.4.2_06)that can only be viewed with the appropriate Plug-in.
Click OK to download Plugin.
when I Click Ok ,display warning :
File not found:www.sun.com, check filename ,try later.
(2.4)change formsweb.cfg
/export/home/ias/OraHome_2/forms/server/formsweb.cfg
change:
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
to:
jpi_mimetype=application/x-java-applet;
(2.5)run again oracle test form and my forms
http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
(Oracle simple test demo form)
or
http://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
(2.6)Problem:
myform and test(Oracle simple test demo form) can run and display,
but all buttons(when click) not work(no response);
all meuns not work...........
How to Solve this problem?
thanks in advance.

The currently supported versions with patches installed are as follows:
<li>10.1.2.3 (10.1.2.0.2 + patch 5983622)
<li>11.1.1.4 (11.1.1.2 or 11.1.1.3 + patch 11060983 : this also requires WLS 10.3.4)
Fusion Middleware (FMw) 11 downloads are available from here:
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
Patches are only available to customers with access to MyOracleSupport (http://support.oracle.com)
For Forms/Reports users, look for the FMw download titled "Portal, Forms, Reports and Discoverer". The distribution includes all that is necessary to design and deploy your applications. Note that WebLogic Server is also required and is a separate download (from the same page). Be sure to carefully review the installation instructions before attempting the process. It may also be helpful to review MyOracleSupport note 1073776.1.

Quicktime Movie Controller Will Not Work in Web Browser

Regardless if it's Safari or Firefox, I cannot click any of the buttons on the movie controller when viewing my movies in a web browser. They work as intended in iWeb, however.

Well I figured it out. Apparently if the video is too low on the page it will not play. I had to change the Y value, moving it up, and it would magically play. Weird...

Navigation key not working

Hi
I have 6600, the problem with my phone is the navigation key is not working some times... i had the same problem with left softkey but it is fixed by itself, i don't know how it got fixed but it started with the navigation key now.. it works fine all the sides but when i move it upwards it is not working.. and it is not happaning all the times.. some times it is working fine and some times it is not... some one plz help me out in this issue........

You will need to take the handset to a Nokia service point for repair - see below
http://www.nokia.co.uk/A4228006
Today Me Tomorrow You

User Authentication for subfolder not working in Web Browser

We are using Oracle Application Server 10.1.2.3 and Database Server 10.2.0.5 for our application.
One of the functionalities of the Application is to send emails with attachments.
The logic is that the Application would generate the attachment file on the Application Server.
Then a database package uses Oracle's utl_http package/procedures(more specifically utl_http.request_pieces where the single argument is a URL) to pick up the file from the Application Server via URL, attach the file and send the email.
Exchange and Relay Server is also set in the Application.
The problem is that the folder containing the folder which stores the attachments is having user authentication set.
Example : The main folder is /apps/interface, this folder requires a valid user when it is accessed via URL on a web browser.
Alias created in httpd.conf
Alias /int-dir/ "/apps/interface/"
The folder /apps/interface/email/ is the folder where the attachment files are generated and stored.
Application Server : 10.12.213.21
Database Server : 10.12.213.22
Email Server : 10.12.213.44
Configuration as per httpd.conf
Alias /int-dir/ "/apps/interface/"
<Location /int-dir/>
AuthName "Interface folder"
AuthType Basic
AuthUserFile "/u01/app/oracle/as10g/oasmid/Apache/Apache/conf/.htpasswd"
require user scott
</Location>
<Location /int-dir/email>
Options Indexes Multiviews IncludesNoExec
     Order deny,allow
     Deny from all
     Allow from 10.12.213.21
     Allow from 10.12.213.22
     Allow from 10.12.213.44
</Location>
Using the above configuration the Application is able to attach the files and send the email, however, when we access the following URL :
http://10.12.213.21:7778/int-dir/ - it prompts for user authentication
However if we use the following URL :
http://10.12.213.21:7778/int-dir/email/ - it does not prompt for user authentication, and all the files in the folder are displayed in the browser.
I have tried so many things including AllowOverride, .htaccess, but i am not able to get user authentication for the email folder.
Please help me if you can.
Thanking you in advance,
GLad to give any more information that i can.
dxbrocky

Thanks for your response. I fixed the problem by selecting "full site" or "full website" at bottom of the web page. After making this selection the zoom function returned. Thanks again for your interest.

IOS 7 glitch: Music app keys not working in lockscreen. Using iPhone 5. iOS version - 7.0.2

the music keys next, prev and play/pause not working in lock screen. I have already reset my iphone twise. reset all settings also. It worked for 2 days and today morning also the same issue. WHich is really annoying. iOS 6.1.4 never had such kinda issues. If anybody has the same issue, please lemme know any solutions to it.

yeah man.. same here.. They just raped the beautiful iOS. Now it looks like a gay OS.. with less performance. I hope they improve it. Else their end is very near like blackberry phones. God save them. God save us. I have spent Rs 45500 to buy my iPhone 5. Dont wanna realise that i have wasted so much money.

Airport Extreme Card Not Working Properly (Web Browsing Slow)

Hello people of apple discussions,
I have the original MacBook Pro with Mac OS X 10.5.7 installed on it. And I have a problem, my airport extreme card is not functioning properly like when I go on the internet, it comes up with the server "www.google.com" cannot be reached or the same with Yahoo! Back when it had 10.4 it was functioning properly with very high speeds. But, all the other PCs in the house gets good internet even my iPhone and the router is functioning properly. It's been like this since for about 6-8 months and i am very upset with my mac!:|So can I have some help or any suggestions!
Message was edited by: mr.ts

Have you tried contacting your ISP? Sometimes they can help you optimize your settings. Such as DNS server numbers. I had a simullar problem and found out my DNS settings were wrong.
Do you have other computers that use the wireless single? If not you might look into your router to see if maybe something is wroung with it. You can always go to a wifi hotspot or a friends house and see how the connection is there. If it seems normal then you know it is your ISP or your router. If not then it might be a laptop problem.

Flash Player trust file not working with Embedded browser on linux

Hi,
I have an application which embeds a browser based on
Xulrunner inside it. I have couple of flash swf files I need to
load in the browser. The swf files talk with a javascript to change
the page title and also to change the URL when I am browsing
through the content in the URL. I need the URL change because I
need to remember where I was in the flash content so that I can go
directly to that place in the flash file when I open my browser the
next time.
To let the swf file do this I created a cfg file and placed
it into the Flash Player Trust folder( I tried both the local one
at /home/user/.macromedia/Flash_Player/#Security/FlasPlayerTrust
and global trust file location at /etc/adobe/FlashPlayerTrust ) ,
but I didn't get the expected result. I debugged into my app and
found that the swf never reset the Title of the page( which
indicates that the javascript was blocked) . It works fine from a
firefox browser but not from inside my embedded browser. My app
also works fine on windows and Mac . This is observed only on
Linux. Can any body think of what else I need to do get my
javascript embedded in the flash file working?
Thanks
jbsp72

I tried out a few more things since nobody on this forum was
responding. I tried installing another application which also
embeds xulrunner browser. So I downloaded Prism which is a simple
xulrunner based browser. The flash works fine with that and the URL
gets set appropriately. So is there any setting I need to do to get
it working. Or could somebody atleast point me to the right place
to ask this question? :(

Using shift key not working with bluetooth keyboard

Am I missing something here? Or does the shift key not work with the iphone using a bluetooth keyboard? I'm using the logitech K810 for reference on iphone 6 iOS 8.1

The shift key works just fine on my Bluetooth keyboard. So I would imagine this is an issue with your keyboard.

G,H,Backspace Keys Not Working- G7 Series Notebook

Product name: HP Pavilion G7-B5Z48UA
Operating system: Windows 8 64 bit
I purchased this computer about a month ago, and it was fine. A few days ago, I noticed that several of the keys (g,h,',backspace, 8) were not working. After the computer has been on for a few minutes, they start to work. This lasts for about a minute or two, then they stop working again.

Hello Lorelly,
Take a look at this page and follow the troubleshooting steps to update your BIOS. The latest version (F.23) was released less than 25 days ago.
Please let me know if this helps resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Certain keys not working. (backspace, brightness, volume)

Recently, the keys on my Macbook Air (mid-11') has not been working properly and I'm unsure as to why this happened. I noticed in the keyboard viewer that sometimes when I press the arrow keys or such, the fn keys stick and doesn't unstick until i use my cursor in order to click on the key. The keys such as the delete, brightness settings, and volume are not working as it should. Sometimes it does, other times it doesnt not. For example, my delete key now only deletes from the left to right. Brightness settings only work when I change to setting to when I hold FN to use f1 f2. My volume settings randomly switched me to dashboard and desktop 2. It should be noted that everything works fine when i type, delete, etc when I restart the computer and go

Hi orangepekoe,
If the keyboard on your MacBook Air is responding erratically, try the following troubleshooting steps:
OS X Yosemite: Reset your computer’s PRAM
http://support.apple.com/kb/PH18761
OS X Yosemite: Reset your computer’s PRAM
If your Mac doesn’t seem to be remembering your speaker volume, display resolution, or the disk it should be using during startup, you may need to reset your computer’s PRAM.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Important: To print these instructions, click the Share button in the Help window, then choose Print.
Choose Apple menu > Shut Down.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.
Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
After resetting your computer’s PRAM, you may need to update your speaker volume, display resolution, and startup disk preferences. For more information about PRAM, see the Apple Support article About NVRAM and PRAM.
Last Modified: Jan 6, 2015
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
http://support.apple.com/en-us/HT201295
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
I hope this information helps ....
- Judy

Backspace navigation key not working in web browser using linux, but does on windoze

Similar Messages

Maybe you are looking for