Backup Mac Pro w/ 4 full bays

I have 1 Mac Pro. 4  2TB Bays.
1st bay Drive has 10.8.4 Mountaion Lion Installed
Other 3 bays are all data usage bays.
I need a way to take a scheduled backup of all drives in a convieniant manner that is set and forget. Some kind of raid, where if 1 bay should fail, I can hot swap it with the backup and be setup.
How can I do this?

RAID provides additional mean Time to Repair after a drive failure, but Backups are not typically a "non-stop computing" requirement, and do not use the redundancy to best advantage.
Using extra drives for a RAID backup is generally not as useful as using those drives for an additional independent backup or a rotating basis ( A, B, or A, B, C) set of Backup drives.
If external single-drive enclosures do not have enough storage space, multiple sets of multi-drive enclosures can be used. Performance will not be an issue because the drives within an enclosure will be written one at a time.

Similar Messages

  • Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

    Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode?  If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little.  However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode.  Unless you have some processes set to activate over night by the cron file and do things like backup the system.
    What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current.

  • Bootcamp to Mac Pro Sata in Optical Bay

    I received my Mac Pro the other day. After reading some of the discussions regarding different setups, I began setting up my Mac Pro as follows:
    I took the 250gb Seagate that came in the Mac Pro out of Bay 1 and installed it under the optical drive. I connected a SATA cable to the mother board and powered the drive using a 4 to 15 pin sata power converter cable. My plan was to use 195gb for MAC OSX and my Mac Applications and to have XP and Doze applications running on the other 55gb.
    I loaded the latest updates in preparation for my Bootcamp install. The partition through Bootcamp installer seemed to work fine - then the Bootcamp installer asked me to put XP in the DVD/CD ROM drive and it loaded files. Then the XP installer reported that it couldn't find a hard drive.
    It seems like the Bootcamp installer and XP is not able to see the partition created by Bootcamp on my SATA drive located under the optical bay and connected via SATA cable to the MB - even though the Bootcamp installer created the partition in the first place.
    At this point, I went ahead and plugged in one of my Bay drives into Bay1. XP was able to see this drive and so I am going to install Bootcamp XP onto that drive. I would really prefer to get Bootcamp XP going on the 250gb under the optical bay.
    I had planned on installing 4x500 gb drives in Bays 1-4 and running a couple of RAID-0 pairs. Now XP is hogging one of those drives.
    Thanks for your suggestions.
    Mike

    So I installed bootcamp XP-Pro on it's own Bay1 drive. It's all working beautifully and the setup is as follows:
    Mac Pro
    2x3ghz
    XT1900 w 2xDell 24"W
    5 gb RAM (4 of it from Other World Computing)
    250gb System Drive OSX (under optical bay)
    Bay1 (500gb WD re2) Bootcamp XP-Pro
    Bays 2-4 (3x500 gb WD re2 in Raid 0 configuration)
    2x 2port Addonics eSATA to Addonics 4 bay eSATA tower with 4x500gb Hitachi
    So far - so good. The ability to run XP greatly increases the value of my Mac investment because I can run some of the programs only available on XP.
    The Apple discussion boards have been very helpful.
    Mike

  • Mac Pro fans run full speed after installing Solid State Drives

    I recently visited the Genius Bar at my local Apple store because my Mac Pro's fans were running at full speed after installing 2 solid state drives. The genius told me that it was because the drives themselves are so small they don't touch the metal tab on the motherboard that reads the drive's temperature, so it defaults to running full speed. Does anyone know how to fix this problem? I've tried smcFan Control but it doesn't let me set the actual fan speed. I'm getting 5200 rpms on my Boost A and B fans, and this causes an insane amount of noise. Can anyone help?

    Which model Mac Pro?
    I have an SSD in a 2009  (MacPro4,1). I removed it from the 2.5 in stamped metal can, and just installed the bare circuit board onto the SATA connector. It does not make any contact with the metal tab below the SATA connector. The only trouble I have is that Tech Tool Pro says its temperature is not optimum when it does disk tests.

  • How to backup Mac Pro 2nd HD onto Time Machine

    Hi, I have a Mac Pro with 2 internal HDs (1 x 500GB containing system and app files) and 1 x 1TB containing documents, pictures, etc.
    I want to use Time Machine to store hourly versions of my work (especially changes to documents and pictures). How do I configure time machine to do this - at the moment it looks like it will backup everything from my home directory but not my second internal drive?
    If I can't do this, what are the performance implications of having my documents (pages, keynote, numbers) being accessed from the boot drive - I understand that it is better to keep these separately.
    Thanks for your help.

    Actually, T.M. backs up any and you use to have to exclude a volume to not be included.
    Also, I would still use another method for making a backup copy of your system and documents, like SuperDuper.
    I don't see the need to backup the system except before making changes, patches, and updates or installing programs and such that I'm not 200% confident of, but otherwise I would not want to have the system and apps being backed up.
    There are also utilities to modify T.M. behavior, when etc and to help navigate and inspect what is in T/M's backup archive.

  • Backup mac pro?

    Stupid question, but how do I back up this computer?

    You can use Time Machine, I would use an external hard drive in case the internal crashes.
    http://support.apple.com/kb/VI29
    You can also make a clone to an external HDD that would be bootable
    http://www.bombich.com

  • PowerPC OS X HD put into Mac Pro 2nd Drive Bay

    Hello all,
    I have a PowerPC G5 and a Mac Pro. The G5 had two drives in it, a master boot drive with 10.4.11 on it and a second internal drive with 10.4.9.
    I took the second drive out of the G5 and put it into the Mac Pro's second drive bay. The Mac Pro's main drive is running OS 10.5.1.
    I figured that I'd have to run the Mac Pro installation disc on the second drive to make it bootable on the Intel system, but it's not allowing me to install. It keeps telling me that I cannot boot off of the second drive in the OS X installation destination window.
    How can I fully strip the OS out of the second drive without reformatting it/touching the other files I have on it so I can basically start it as a clean slate for the Intel system installation?

    Hi,
    your problem is that your 2nd drive is formatted using APM (Apple Partition Map) instead of GUID. Usually PPC Macs use APM and Intels use GUID. Even though Intel Macs can boot from an (already installed) Intel OS X, the Install DVD refuses to install on APM partitions when run on an Intel Mac. So in order to install OS X on this drive you need to repartition it using GUID partitioning in Disk Utility. This will, of course, delete everything that's on the drive!
    If you don't want to do that you can put the drive in the G5, install Leopard and then put it back into your Mac Pro and see if it boots.

  • Mac Pro Compatibility With Older SATA Drives And DVI Connectors

    I soon plan to replace my 5 year old G5 with a new Mac Pro and need two questions answered so that I will know what options i have for the transfer of older data and apps. The Apple web site for the Mac Pro includes the following paragraph which gives me reason for concern:
    Your Mac Pro includes four drive bays, allowing you to configure it with
    up to 8 terabytes of storage using 7200-rpm Serial ATA 3Gb/s drives, up
    to 2 terabytes of storage using high-performance solid-state drives, or
    any combination of each type of drive. Configure each drive bay
    separately.
    Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
    I currently have two internal SATA 250/300 GB Maxtors (Maxtor 7Y250M0 and Maxtor 6B300S0... both are 7200 RPM but I don't know the data transfer speed). Ideally I would get a Mac Pro with a single 1 TB drive, move one or both of these older SATA drives to the new computer, one temporarily and the other permanently in order to transfer data and Apps to the new machine. If this is not possible then the new machine will need to wait until after I get a new larger FW external drive to use as a data transfer medium (I had planned to do that anyhow). I need to do some advance planning for this so I need to know what to expect in advance. I noticed this possible wording ambiguity on Apple's description of the Mac Pro long ago, but now I need to find out the answer for sure. Apple, you need to be more specific with your words.
    Can anybody answer this question for me?
    My second question regards display connectors. Does the standard (no bucks added) display card include a standard DVI connector or only the newer Mini-DVI connectors. I think I see a standard DVI connector in the low res picture of the back of the Mac Pro but am unsure. My 5 year old Apple display bit the dust a year ago and I had to replace it with an HP 2009m display (mumble grumble) which does use a standard DVI connector. A new Apple display is too rich for my blood so I plan to continue using the HP display for now and need to find out if I will need a display adapter to go with it.
    Many thanks to anyone who can answer these questions authoritatively.
    For anyone who asks why I still run 10.3.9 on my G5, I can only answer response speed. New OS versions always act like a lead anchor on a machine with their added overhead and Tiger really does feel like a ball and chain tied to me... it just does not reaspond as fast as I do. I look forward to the speed of a new machine.
    Phil Rogers
    --

    Does the phrase "using 7200-rpm Serial ATA 3Gb/s drives" mean that the Mac Pro will ONLY work with 3Gb/s drives or that it performs best with 3Gb/s drives?
    Any commercial sATA drive will do just fine. 7200 RPM is not a requirement.
    WD "Green" drives have caused user complaints about "long delay until ready" when installed inside a Mac Pro, but are fine for backups.
    You are making the leap from PowerPC to Intel Mac. Eventually, you should re-initialize your old drives to GUID partition table for best responsiveness.
    Migrating your System will not be possible. Use the pre-installed System or Install a new System on a GUID-partitioned drive with the release DVD in the box.
    Migrating your Applications is a Bad Idea. You should plan on re-installing all your third-party Applications from their release discs.

  • Ad a drive already containing Win7 to Mac Pro

    Hello,
    i would like to "merge"  a windows 7 PC with my Mac Pro.
    Since the Mac Pro has 4 drive bays, i can place the HDD from my windows machine in the Mac Pro very easy
    I can install Boot Camp.
    But i dont want to install Win7 again and use the already installed and running Win7.
    Is this possible?
    Maybe a brute force method:
    If i just ad the drive without installing bootcamp
    and boot using the option key can i select the Win7 drive?
    Will this work ?
    Thanks in advance

    If it came from different motherboard and platform you will have to scrub the OS and re-activate, assuming it is retail version and can be moved.
    There are utilities to sanitize or scrub but I have not used any, most are Windows platform but I have seen people post here that they did. Hint: search if possible with Google moving Windows from PC to Mac.
    And while you might be able to option boot, it may not show up in Startup Disk in OS X, and you will want some of the Apple drivers, may need to uninstall graphic driver it had first too.

  • Mac Pro vs G5 speeds

    I have been all over the internet and forums trying to find out what type of performance difference there would be between a dual 2.7 g5 and a quad 2.66 Mac Pro.
    I wrote off upgrading as I thought the performance gain wasn't great enough to be worth the time to buy a new computer, transfer the contents and then sell my old one on ebay.
    Now I am rethinking it because I need more storage and the Mac Pro has 4 internal bays. I would like a second internal optical bay as well.
    I really only care about the speed running lightroom as that is 90 percent of what I do. (Aside from burning CDs). I hardly even go to photoshop anymore.
    Thanks so much for any info.
    JMHO :) Adam
    http://www.adamapalmer.com

    Lightroom is throttled to under about 3 gigs. . .that's something the engineers are looking at but as long as free system ram is high enough I'm not seeing ram induced slowdowns for LR. With regards to the processors, yes, I've seen processor loads reach just under 600%-particularly for processor intensive (and well written multithreaded activity) such as generating previews and prociessing raw files. The mian bennies for the 16 gigs of ram is that I can't remember seeing a spinning pizza wheel since there's so much free ram the system never really pages. mAnd that's running CS3, Bridge 2, Lightroom, InDesign and Word all at the same time.

  • Upgrading a Mac Pro 1,1 for FCP X

    I'm starting with a Mac Pro 2.66GHz Dual Core Intel Xeon with 4GB RAM (4x 1GB Modules) and Geforce 7300 GT. I run FCP 6 on DV footage. My goal is to run FCP X working with AVCHD from consumer level cameras, DSLR video from cameras such as the 5DMkII, and the Canon XF300. The Scratch Disks are 7200 RPM HDD's either in the Mac Pro's additional drive bays or connected via eSATA. What I'm thinking is to replace the stock video card with the ATI Radeon HD 5770 and increasing the RAM to 12GB by adding 4x 2GB Modules. My level of complexity for edited projects is basic transitions, lower 3rds, and ocassional use of three way color correction. With the upgrades I have listed here, do you think I have sufficient hardware to get started with FCP X? Anything else I should be aware of either hardware or software related?

    AVCHD is fairly processor intensive, being so compressed. So, I'd suggest downloading the free trial of FCP X to get an idea of how well your current CPU will handle some of this footage. You can transcode it to ProRes. Just keep in mind your files will get a lot bigger.
    You might want to check on the current status of XF300 support. I think you might have to re-wrap those files into *.mov files. I do when I use Sony's XDCAM EX format. Not an issue, just make sure you understand what it takes to work with Canon's format. (or Sony's)
    Check to make sure the 5770 will work in your Mac Pro. I have one in my Mac Pro 3,1 and it's fine. But I had heard there might be some capatibily issues with older Mac Pros.
    You might want to consider more than 12 GB of RAM. On my system, FCP X seems to hover around 7 GB of real memory. 
    It can be a touch decision to upgrade an old Mac Pro, or simply getting a new system. I wouldn't suggest getting a new Mac Pro now. Intel's new processors should be out in 1Q12 and they will be significant upgrade to the current offering.
    The new iMacs (specifically the fastest ones, with the most GPU RAM) are very good FCP X editing machines. They can keep up with the fastest Mac Pros, for less money. But, you do loose internal expansion and would have to move to Thunderbolt. Probably at least three times the perfomance of what you have now.

  • Adding a SSD to a Mac Pro

    I want to get a Mac Pro in the new year, I will also get one of the new 300gb Intel X25-M's when they are released. I'm wondering if there is a product to mount a 2.5" SSD in the sled that doesn't cost a lot of money. The products I can find that are reasonably priced are designed for PC's and don't take into account the position of the SATA connectors in the Mac Pro. I don't want to spend $60 + shipping to Australia for the one bracket I found thats made for a Mac Pro.
    Thanks for any suggestions.

    Hello DELTAsnake,
    As Alex said, you can install an SSD in the lower optical drive bay without any form of mounting at all:
    http://macperformanceguide.com/Mac-InstallingSSD.html
    I installed my SSD system boot drive (OS and Apps.) there, as per the above instructions, which are the same for the new 2010 models as shown for the Mac Pro Nehalem (2009) installation.
    Its performance there is exactly the same as if it was installed in one of the Mac Pro's hard drive bays, but with the added advantage, for me, that I could use all four of those bays for a RAID 0 configuration using WD VelociRaptors.
    Even if you don't want to use all four hard drive bays initially, it still makes sense to install the SSD in the lower optical drive bay, unless you need two optical drives.
    You mention your intention to buy "one of the new 300gb Intel X25-M's when they are released", but why not consider an OWC Mercury Extreme Pro (or Pro RE) instead?:
    http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSD_Sandforce/Solid_StatePro
    http://eshop.macsales.com/shop/internalstorage/Mercury_Extreme_SSD_Sandforce/Solid_State_RaidEdition
    They are rated extremely highly for use in Mac Pros:
    http://macperformanceguide.com/SSD-RealWorld.html
    I ordered a Mercury Extreme Pro RE 100GB SSD from OWC in the USA, and delivery to the UK, via Federal Express, was effected within two days.
    Regards,
    Bill

  • Will a DVR from a G5 Mac Pro work in a G4 MDD?

    Specifically, will a Sony Optiarc AD-7170A DVD±RW  work in a G4 1.25MHz dual Mirror door?  The drive is a pull from Mac Pro G5.  The optical bay in the MDD is ATA-33.   The burst specs on the drive suggests ATA-66.  The optical bay cable will reach the ATA-66 plugin on the logic board.  Is this kosher?
    As a "This Old Mac" guy,  I welcome your suggestions.  I hate to discard neat old things that work well. 
    best regards

    Hello Krumer,
    Houston, we have a problem!
    G5s & Mac Pros are 2 completely different animals though they look quite similar on the outside, G5's are PPC, have one Optical slot & use IDE Optical drives like G4s do, Mac Pros are IntelMacs & have two optic slots, & might use IDE Opticals or SATA Opticals!
    So, with the Sony Optiarc AD-7170A being IDE, I suspect no problems, depends which APPs you want to use it with.

  • Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    It is a hard one.. laptops with small drives are a pain.
    What you need is a home media server.
    Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
    https://www.apple.com/au/support/homesharing/
    For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

  • Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA  - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

        Hi All,
         I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
         What are relative speeds of USB vs. Firewire vs. eSATA ?
         I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Thanks

    Jim Bogy wrote:
    ...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
    Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

Maybe you are looking for