Backup oracle database - pre post steps
I want to do cold backup of 10g database. Do I need to shutdown Oracle Application server and listeners before doing cold backup and start them again after backup done.
for taking cold backup then its better to shutdown the apps server as well
database.I would recommend to you whenver you are going to take cold
backup for db then its better for you to take apps cold backup too if
the cold backup goes after you applied any patch ,within E-Biz tech the
patch activity affect apps files too.
Khurram
Similar Messages
-
Physical movement of SAP Servers ( Procedure,Odds n Cons, Pre/Post Steps )
Physical movement of SAP Server and Pre,Post steps ?
Hello Experts,
Need your help here.. Our Data Center is moving to Different Place , hence IM team proposed Physical movement of SAP Server to New Location.
In our Landscape we have SRM 4.0, XI 3.0 & BW 3.5 , ITS 620 and Requisites Servers available . As these are out of SAP support we don't have expert for ITS and Requisite Server installation and configutaiton.
Please please tell me Will this process work ? if yes then what are odds n cons in this procedure , Pre and Post Steps need to perform.
Please help me as early as possible as we need to take decision ASAP.
Thanks and Regards,
Raja.
Net-weaver Consultant.Hi Raja,
You need to take care of following
1) Ensure that IP address and hostname are retained in the new DC. If IP is changing you need to take a note of all the RFC and JCO connections where IP is used and replace them with hostname.
2) For ITS you can re-install and re-configure. It is not a big task.
Make a note which all places ITS is configured.
3) You need to have full offline backup of the system before movement.
4) You need to plan for some System integration testing post movement to ensure things are working post DC migration.
Some useful information can also be found in http://christian.bergeron.voila.net/DC_Guide/Data_Migration_Methodology_for_SAP_V01a.doc
Hope this helps.
Regards,
Deepak Kori -
Have any GUI tools to backup oracle database(s) ?
Hi,
I want to know is any oracle's tool or third party tools to backuping oracle database?
Thank you!
Francis SZEDevotee wrote:
Hi,
I want to know is any oracle's tool or third party tools to backuping oracle database?
Thank you!
Francis SZE
Use RMAN through enterprise manager
Cheers -
How to backup Oracle Database Single Instance using RMAN
Folks,
Hello. I am using Oracle Database Server 11gR1 with Operating System Oracle Linux 5.10.
I understand how to backup database instance in SQL Server with Windows. But don't really understand how to backup database instance in Oracle with Linux.
I have done Cold backup and Hot backup for the database instance HRCS90 but both get the same error message.
Cold backup is below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size 2146024 bytes
Variable Size 528482584 bytes
Database Buffers 4194304 bytes
Redo Buffers 3854336 bytes
Database mounted.
Database opened.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
RMAN> backup database;
Starting backup at 25-NOV-13
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 11/25/2013 14:26:52
RMAN-06171: not connected to target database
RMAN> backup HRCS90
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, as, backup, backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, database, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, force, file, incremental, keep, (, maxsetsize, nochecksum, noexclude, nokeep, not, proxy, pool, reuse, recovery, section, skip, spfile, skip readonly, setsize, tablespace, tag, to, validate"
RMAN-01008: the bad identifier was: HRCS90
RMAN-01007: at line 1 column 8 file: standard input
RMAN> backup database HRCS90
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, backup, backupset, channel, copy, controlfilecopy, current, database, datafile, datafilecopy, delete, diskratio, db_recovery_file_dest, filesperset, format, from, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, plus, reuse, recovery, section, ;, skip, spfile, skip readonly, setsize, tablespace, tag, to"
RMAN-01008: the bad identifier was: HRCS90
RMAN-01007: at line 1 column 17 file: standard input
While the database instance HRCS90 is startup, I do hot backup using the same commands and get the same error message with above cold backup.
My question is:
Can any folk tell me the specific steps (command by command) to backup a single database instance in Oracle using RMAN ?
Thanks.Folks,
Hello. Thanks a lot for replying. My database instance named HRCS90 is going to be backed up. My backup directory is /backup_Database_Instance_HRCS90.
If database in open state, we must back up in archive log. If database in mount state but not open, we can back up in noarchive log.
I have tried to back up HRCS90 in archive and noarchive log when database in mount state but not open as below:
SQL>startup mount;
SQL>exit
[user@linux bin]$./rman
RMAN>connect target;
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
new RMAN configuration parameters are successfully stored
RMAN> backup as backupset database plus archivelog;
Starting backup at 01-DEC-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=44 device type=DISK
specification does not match any archived log in the recovery catalog
backup cancelled because all files were skipped
Finished backup at 01-DEC-13
Starting backup at 01-DEC-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
channel ORA_DISK_1: starting piece 1 at 01-DEC-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 12/01/2013 17:52:45
ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 13: Permission denied
RMAN>
RMAN>
RMAN>
RMAN>
RMAN> backup as backupset database;
Starting backup at 01-DEC-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
channel ORA_DISK_1: starting piece 1 at 01-DEC-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/01/2013 17:56:51
ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0coqeia5_12_1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 13: Permission denied
As we see the above last 2 commands, either archive or noarchive, I get the same error:
Archive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
Noarchive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0coqeia5_12_1"
My question is:
What is the file "full_0boqei2c_11_1" or "full_0coqeia5_12_1" ? How to solve the above error ?
Thanks. -
Backup Oracle Database whilst online
Guys looking for some help, I have an Oracle database that must run 24hours a day but I need to be able to back this database up daily, from what I understand I have to make the database run in archive log mode to be able to perform a hot backup.
I have found out that currently my database is in noarchive log mode
Can someone help me with the commands to put the database is achivelog mode
Then can you help me with the command to backup the database using RMAN I have read some documentation do I need to just issue the backup database command or do I need to backup the archive logs files as well ?Do you want to teach me lesson ? I'm working with Oracle database since 1988, and I'm using RMAN since version 8.0 (15 years ago, or so).
And please read the link I posted above.
1) ... At lease two redo logs destination is recommended so that one redolog destination is keep working while other is filled up or vice versa.
And you think I don't know that ? And that's not multiplexing.
2) Catalog database is optional but it is recommended.
It's absolutely not needed, and I consider it just and overhead (another database to manage and to synchronize).
3) You need to setup archivelog retention policy so that it cleans up from LOG destination after certain period of time.
You use DELETE INPUT option in your script, but it looks like you don't know what it means.
Please follow oracle documentation for best practice .
Again, are you teaching me lesson ? Oracle documentation is my bible.
Backup is very important for a DBA so you need to set up precisely so that you can recover the database during disaster
Backup is very important for a DBA ? What a news !! About disaster recovery, at your #1 you said "redo logs are very important to restore database" : or we mean something different for "disaster recovery", or you are totally wrong. -
ShadowProtect to backup Oracle Databases
Hi to all
I would like to hear from anyone if you are using ShadowProtect to backup your Oracle databases.
What are your experiences and the pros and cons in using ShadowProtect as the one and only backup/recovery tools for Oracle databases?
Can the potential of ShadowProtect replaces the commonly use Oracle backup/recovery tools?
The reason why I raise this question is because my boss has the idea that ShadowProtect is THE best backup/recovery tools. Personally I don't think so, because there can be cases where we only need to recover the database and not the whole OS. Thus need to hear more from you guys.
Thanks.
Edited by: moslee on Mar 22, 2013 2:24 AMHey Moslee,
You should definitely be testing your Oracle database recovery plan quarterly. If you're not even testing it annually that would be what really scares me the most. Testing should show you what you can and cannot get out of your backup and recovery software. Everything else being equal, please please please test your backup and recovery plan and do it often.
As for ShadowProtect, one of the nice things about this backup solution is that it's an image-based backup which means that it will quiesce the Oracle database and transactions to get a good snapshot of your database. Then (because it's an image-based solution) you can recover the Oracle DB, OS, installed applications, running services, data, and etc to that specific recovery point. Another nice thing is that ShadowProtect can quickly virtualize a backup image as a VM using Oracle's VirtualBox, MS Hyper-V, VMware, Citrix ZenServer and/or RedHat's KVM. Over all ShadowProtect's a pretty powerful and easy to use Windows backup tool.
Oh, and ShadowProtect's integrated with Oracle's VirtualBox technology (it's called ShadowProtect VirtualBoot) which makes it SUPER easy to spin up a backup image as a VM and verify (read "TEST" in capital letters) whether you've got a solid backup of your Oracle DB. I'd hate to find out the day after the excrement/fan fiasco that my backups were unusable. Please test! (I'm cringing in my chair here.) Then let us know whether you agree with your boss.
Cheers! -
Backup Oracle Database On 24x7 System
Dear Kamran
First sorry my English.
I am a beginner of oracle 10g and have a problem please help (Consult) me. If you are accept it
My problem is a :
Two oracle server with RAC (Clustering) and one external oracle server (BACKUP ORACLE SERVER) on the this network without RAC (Clustering) on the RHEL 4.7
How to synchronize third oracle server’s database with RAC oracle servers. Becouse of if RAC Oracle servers down or technical corruption change corrupted server.
Or other flexible solution tell me (how to do it)you can make the third oracle server as a physical standby database to RAC setup. for more information, read oracle doc "Dataguard basics and administration" from http://tahiti.oracle.com
as other option, you can schedule a refresh job from RAC setup to third database server. -
Database upgradation post steps
After completion of upgradation we got some objects Invalid dba_registry.How to troubleshoot this issue.
If u we got invalid objects then we run utlrp.sql . we got in registry how to resolve this issue.
Please help me.Hi;
i am upgradting 10.2.0.4 to 11.1.0.1. while upgrading whether we need check any OS requirements or database requirements?Oracle 11g and 10g (or we can say each new version) need to work wiht some settings, thatswhy you need to check installation guide and also below notes and need to make those adjustments like kernel settings, rmp needs etc..
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
After upgradation , if i got any invalid status in dba_registry. How to make it valid staus?It depends what objects are invalid, if you have invalid objects you need to check first what objects are invalid, than you need to make some search. For instance you may hit some package are invalid than you need to search on metalink abotu some notes like below:
Select From Dba_registry Shows Packages & Types Invalid [ID 579002.1]
Regard
Helios -
Alert mail configuration for backup / Oracle database
Hello All,
I am trying to configure alert mail for successful backup in the system and i have did with most of the configurations. The steps are as follows:
Configured mail in 000 client and also assigned mail id for a user
Configured the method CCMS_OnAlert_Email_V2 (set the parameters and its auto reaction method)
Configured the nodes CCMS Monitor templates -> Database -> Oracle -> Backup / restore -> backup status -> last brbackup run and last successful complete backup with the method CCMS_OnAlert_Email_V2 as mentioned in the SAP note 176492
And after these configurations we receive the mail successfuly. However there are few issues which i would like to get corrected / clarified. Whenever a backup is started i am receiving a mail stating that brbackup has been started and whenever a backup fails i am receving mail stating brbackup is failed with some return code. But i am not receiving any mail after successful completion of backup. Am i missing any configuraions here? Is this the standard one and other configurations required for mail on successful backup? Please suggest
Regards,
AnandhWhen should a message trigger an alert?
1.Always (at every message): The Alert Monitor triggers a alert with the corresponding message value for every message.
2.Message value (color) has changed: The Alert Monitor only triggers an alert if the alert color of a reported message changes. For example, an alert is triggered if a red message follows a yellow message.
3.The message sent has changed: The Alert Monitor only triggers an alert if the color or severity of a message changes or if a new message is sent.
4.Never: The Alert Monitor does not trigger any alerts.
As your requirement, I would suggest it to be set to "Always"
Please let us know how it works.
Regards
Puneeth -
How to backup oracle database in C# application
Hi,
Could anyone please tell me about a full script that will backup my Oracle XE "Express" database. I have user schema and it has tables with data and I want to backup them. I hope someone tell me how. I want to do it inside a button so it can be easy for me to just press on button and it will continue its job. Thank you very much for your help.
Any method is appreciated from you. So I just need the way that I can do it. In Oracle forms I used to use exp but in C# I don't how.ok
Even this is ODBC forum, you could check for $ORACLE_HOME/bin/Backup.bat ... analize that script. You could call it from c# with Process Class, and process.startinfo.
Regards
Florin -
OS crush without backup Oracle Database (DB 9i)
Dear All Experts,
My Oracle DB is installed on Window Enterprise 2003R2, all installation files of DB keep in another partition (driver D:) beside OS partition (C:).
Now, My OS crushes, I want to reinstall a new OS and recover all DB files back. is it possible?
Please kindly give advice for this.
Thanks and regards,
HengYes, you should be able to recover your database.
You need to reinstall the Oracle 9i software to the same patch level as it was earlier. When doing the install, choose to not create the database -- because you already have one. After the installation (and applying patches), use ORADIM to create the OracleService.
You need to restore the database parameter file (initSID.ora or spfileSID.ora) from a backup. The entry for control_files would reference the existing control files. Thereafter, Oracle would read the list of datafiles from the controlfiles.
Hemant K Chitale -
How to backup an oracle database?
I am running a oracle server on a windows box.
using the oracle 92 management console and developer tools.
Can someone instruct me on how to create a "job" that will backup my oracle databases on a daily basis?
I am more used to MS-SQL and have no clue how to do it in Oracle.
ThanksHi,
this is my weekly script to backup oracle database.
i run it from cron so you can schedule it in win but you must do same change there
#!/bin/bash
. /etc/profile.d/oracle.sh
TMPDIR=/opt/app/oracle/tmp
$ORACLE_HOME/bin/rman target / nocatalog log=$TMPDIR/backup_full_`date +'%Y%m%d_%H%M'`.log >/dev/null 2>&1 <<EOF
set echo on;
show all;
crosscheck archivelog all;
crosscheck backup ;
delete noprompt expired backup device type disk;
backup device type disk database tag='FULL_BACKUP';
backup device type disk archivelog all not backed up;
delete noprompt obsolete device type disk;
exit;
EOF
exit -
Any Simplifiede Script to Backup Oracle XE Database
I need a script to backup XE Database
i.e that script should put all the resultant backup filse at a specified location
Similarly Restore script which should restore from those files.Devotee wrote:
Hi,
I want to know is any oracle's tool or third party tools to backuping oracle database?
Thank you!
Francis SZE
Use RMAN through enterprise manager
Cheers -
The problem of installing oracle database 9.2.0 on Redhat 7.2
Hi, there,
I meet an error when I want to run runInstaller to install oracle database 9.2.0 on Redhat 7.2 at the Oracle Database Configuration Assistant step:
ORA-03113:end-of-file on communication channel.
the installer report every other things are installed successfully except Database Configuration Assistant. but after I try to connect to database using sqlplus:
sqlplus /nolog
connect / as sysdba
after a very long responding time, there is an interior error. I don't know how to fix it. do I need reinstall the oracle or mannully configure the database? how to do that? my machine is P2 266 with 128M memory. the harddisk is 30GB. I don't know if this problem is caused by memory limitation?
besides, who knows any other forums or website about oracle database installed on linux? I found there is very limit resource about this content on oarcle website.
any hint will be great appreciated!It could be because of the memory. Oracle 9.x requires 512 MB minimum on Linux. Also the only Red Hat Oracle is now supporting is Advanced Server. But there are workarounds.
There is an excellent web site for installing Oracle on Linux, but it has been down for the last week or two. But try it maybe next week:
www.puschitz.com -
SAPINST failed step "Install Oracle Database (post processing)"
i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeckHi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego
Maybe you are looking for
-
Everyone that has or had a iPhone, if they did not buy from the dealer, they purchased it from a individual...in most cases, the phone has to be unlocked unless it's being used with the same carrier as the seller. My question is, when you purchase t
-
Mail not saving sent messages, not moving Junk messages
Hi everyone, I'm having a bit of trouble with OS Mail. I've set it up to use an IMAP account, and have set my preferences such that Mail should save all my sent messages in the Sent folder (I assume the Sent folder on my computer, not the one on my I
-
Brand new Pavilion laptop how to turn on my integrated wed cam
I need help when i try to use skype the computer said mi camara is turn off wow i turn on my camara thankyou
-
How do you specify printer profiles in Elements 11?
I upgraded from Elements 7 where there was a "drop-down" box that listed all of the available printer profiles to choose from. I don't see a drop-down box in Elements 11 to accomplish the same thing. I use Color Munki to set up printer profiles and
-
hello everybody, now here is a little something taht totally wrecks my nerves. while trying to set up my laptop for recording (pismo) i noticed a distorted hiss in the headphones. it will not quit, whatever i do. its not the headphones, i doublecheck