Backup set in the tape. copied into disk. how to recover using RMAN
I have backup set in the tape. copied into disk. how to recover using RMAN
any link and steps please
It should be something like the following, but really you should read and understand the rman documentation first ...
1. restore the controlfile
sqlplus / as sysdba
startup nomount
exit
rman
connect target /
restore controlfile from '/path to the controlfile backup piece';
exit
sqlplus / as sysdba
alter database mount
exit
2. catalog the backup pieces
rman
connect target /
catalog start with '/path to backup pieces';
3. restore the database
rman
connect target /
restore database
4. recover the database
rman
connect target /
recover database
5. open the database
sqlplus / as sysdba
alter database open resetlogs;
Similar Messages
-
I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it. -
When I go to Setting>icloud, the tap Delete it asks for a password and the email on screen is incorrect.So I cannot delete Account.
Don't know anything about McAffe Enterprise Server, but if your employer is preventing you from using iCloud backup there's really no way to use it without removing this from your phone. Unless you can convince the IT guys to make an exception.
-
Im canadian and recently bought THG dvd in the us, but when i went to download the digital copy into my iTunes is would't let me. Is there any way to download it?
Probably something to do with Apple/iTunes cross border copyright !
Only thing I think you can do is to try and appeal to Apple's better nature and explain what has happened, I would not hold your breath though.
Custom mini -
HT4414 I accidentally deleted garageband and I can not find the disks how to recover it?
I accidentally deleted garageband and I can not find the disks how to recover it?
Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html -
My phone some how deleted not all but most of my contacts and then backup to the iCloud can I go back to a previous backup and retrieve the contacts. If so how.
Hi Shero89,
Thanks for the answer. I am not new to IOS software but I don't really ever bother with it, have discovered how little I take advantage of the i-phones capability, in reality I still only really use it to phone, text, check emails, listen to music and look on internet. I'm not keen on jailbreaking it as I don't trust it to work so normally just update and leave it at that. Only reason I wanted to downgrade was because the update had stopped my bluetooth working but Kilted Tim solved that problem for me so am now not interested in downgrading software. I quite liked the things that IOS 5.1 gave me but wasn't happy with fact that bluetooth stopped working in car as it caused me problems. One day I might try and work out exactly what I-phones can do but on the basis that it's a phone all I really want it to do is phone, if that bit works I'm happy. -
How to recover using lion recovery disk assistant IN MAC MINI
how to recover using lion recovery disk assistant IF MY KEYBOARD AND MOUSE DOEST NOT WORK DURING BOOTING ?
Hello:
If my memory serves me correctly, the licence agreement that comes with a new system indicates that is good for one system....
Also, I do not think that something that would boot one type of processor would work on a different type.
Barry -
i already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1 how can i use previously downloaded software
plzz help me as soon as possible
-
I am living now in UAE if I bought an I pad from your website is the warenty for it and how I will use the waranty
You can find authorized Apple dealers in Abu Dhabi by clicking here. They can answer purchase questions and most can handle warranty service.
By the way, this forum is for questions about the iPod touch, not the iPad. If you have questions specific to the iPad, it would be best to ask them in the iPad forum.
Regards. -
i formated my macbook pro with windows 7 and i lost all the drivers, does anyone know how to recover the drivers?
How did you get them to install the first time and where did you get them?
Read the Installation Guide, Boot Camp 4.0 FAQ and the Windows 7 FAQ.
Here's the Boot Camp Manual. -
i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?
why can't you use the keyboard the way it is printed?
-
I have ASA 5505 8.4. How to configure the switch to the backup channel to the primary with a delay (for example 5 min.) using the SLA monitor?
Or as something else to implement it?
My configuration for SLA monitor:
sla monitor 123
type echo protocol ipIcmpEcho IP_GATEWAY_MAIN interface outside_cifra
num-packets 3
timeout 3000
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachabilityHey cadet alain,
thank you for your answer :-)
I have deleted all such attempts not working, so a packet-trace will be not very useful conent...
Here is the LogLine when i try to browse port 80 from outside (80.xxx.xxx.180:80) without VPN connection:
3
Nov 21 2011
18:29:56
77.xxx.xxx.99
59068
80.xxx.xxx.180
80
TCP access denied by ACL from 77.xxx.xxx.99/59068 to outside:80.xxx.xxx.180/80
The attached file is only the show running-config
Now i can with my AnyConnect Clients, too, but after connection is up, my vpnclients can't surf the web any longer because anyconnect serves as default route on 0.0.0.0 ... that's bad, too
Actually the AnyConnect and Nat/ACL Problem are my last two open Problems until i setup the second ASA on the right ;-)
Regards.
Chris -
How do I remove a person from the computer, when it was new the person registered themselves
I don't know OS X server but presumably it's a lot like Mac OS X in which case all you need to do is going in System Preferences -> Users & Groups -> Click on the lock at the bottom left if it's locked to unlock it.
Then you select the user account you wish to delete and click on the minus sign under "Login Options" in the bottom of the users table.
As far as I remind it will ask you wether you want to delete or not the selected user's data.
PS: you need an admin account to do that. If that user you want to delete is the only one then you must create one using the plus sign instead of the minus one and check the "Allow user to administer this computer" box. Then log out from user #1 account and start a new session with your new account. -
Need a help: how to recover using backup control file?
Please a help:
First computer
1. I create a database
2. put it in archive mode,
3. shutdown and made a cold backup
4. Created backup control file (alter database backup control file to trace)
5. I started up and created some archived log files.
Second Computer
1. I copied all files created in the step 3 above except the control file
2. I create all the same map directory on the 2nd computer as in the 1st computer
3. I recreate the control file from the script got in the step 4 above
4. I Copy archived log files generated at the step 5 in the local directory in the second computer
5. I set the logsource and set the autorecovery to on
6. I recover the database: RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL
Error got:
the archived log file applied do not go beyond the first one?,How could I do to applied all archived log files copied from the first computer to the second computer to have the same data?
Thank you very mucharchived log sequeces in the first computerSQL> select sequence#,first_change#,next_change# from v$log_history;
SEQUENCE# FIRST_CHANGE# NEXT_CHANGE#
1 553723 555484
2 555484 557345
Actions I did in the second Computer(after copied the former two archived log files from the 1st computer)
SQL> CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG' SIZE 50M,
9 GROUP 2 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG' SIZE 50M,
10 GROUP 3 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSTEM01.DBF',
14 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\UNDOTBS01.DBF',
15 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\SYSAUX01.DBF',
16 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\USERS01.DBF'
17 CHARACTER SET WE8ISO8859P1
18 ;
Control file created.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Disabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 0
Next log sequence to archive 0
Current log sequence 0
SQL> alter database archivelog;
Database altered.
SQL> set logsource C:\local_destination1_orcl
SQL> set autorecovery on;
SQL> recover database using backup controlfile until cancel;
ORA-00279: change 555611 generated at 01/18/2007 14:14:14 needed for thread 1
ORA-00289: suggestion :
C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC
ORA-00280: change 555611 for thread 1 is in sequence #1
ORA-00328: archived log ends at change 555483, need later change 555611
ORA-00334: archived log:
'C:\LOCAL_DESTINATION1_ORCL\ARCH.1_1_612194518_43F17CF5.ARC'
Idon't know where the change 555611 is coming from? -
Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.
Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.
Maybe you are looking for
-
Need help to display geo-characteristics on a map in SAP BW report
Hello all, Currently I am struggling to display plants on a map of Germany in a SAP BW report, using dynamic geo-characteristics in SAP BW. We do not have the ESRI software ArcView (my superior does not want to buy it), so I have to be successful wit
-
There are some common error tables storing error IDs information ( IDs like error type, project id, interface id, message id etc.) in Operational Database (is not on source or target system) which we have to update using java API. We need to call jav
-
I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic
-
Can the iphone be compatible with my existing hardware?
I need to know if the iphone will work with my Powerbook G4 500. I don't believe it has a USB 2.0 port. Will the iphone work with my Powerbook USB port? At a slower speed? I do have a Firewire 400 port. Is there such a thing as Firewire 400 converted
-
Home/Remote Interface and BeanName EJB in different Packages
Hi all, I have a simple stateless session bean. Its Home and Remote interfaces are in X package and the BeanEJB in another. The files compile without any error. While I try to deploy it into J2EE ref implementation server using its deployment IDE, it