Backup SunMC Using RMAN

Hi,
I know that SUN has a utility calls es-backup to backup the SunMC. However, since we could NOT affort to shutdown the SunMC for backup, can we use RMAN to backup SunMC Oracle database, SunMC Config files? This means that SunMC Processes are running during backup operation. Can I use this immage to restore? Thanks
Appreciate your help very much.

use es-backup with -o option; which does online backup. Make sure that oracle is running in archive mode. To configure this you must have run
/opt/SUNWsymon/sbin/es-config -a
I hope this will help.
Cheers,
Zia-ul-Hassan
Message was edited by:
zhassan
Message was edited by:
zhassan

Similar Messages

Oracle 9i TEMP tablespace backup problem using RMAN!

Oracle8/8i whole backup is ok for our backup software(using RMAN without RC database), but for Oracle 9i, I get following error messages when backing up temp tablespace.
1. RMAN-20202: tablespace not found in the recovery catalog
2. RMAN-06019: could not translate tablespace name "TEMP"
I check some views of Oracle9i, and know some changes happen for temp tablespace in 9i, but how to deal with this problem. Any idea, please!

In 9i RMAN does not restore temporary datafiles. Instead, you should create them after your restore. I believe that Oracle is going to make a change to this in the next release of 9i and have RMAN create the temporary files. You can view the temporary datafiles @ v$tempfile.
I believe RMAN doesn't restore temporary files because they are locally managed and not in the control files. RMAN reads the controlfile of the target database to obtain info about backups, datafiles, etc.
Hope this helps.

Synchronous multimaster replication Backup strategy using RMAN

Hi all,
I am using synchronous multimaster replication. my question is backup strategy has to perofirm in all the master site or only in any of 1 mastersite? what all problems will encounter in RMAn backup in my scenario please help me out with your suggestion
nagaraj.K
[email protected]

You ask: "I want to configure backup strategy using RMAN. any one can help me that"
And the answer is clearly no we can not.
An RMAN backup strategy depends on your SLA (Service Level Agreement) with your customers that you didn't post. What is your down-time window? What is your skill set?
You ask: "How to configure for RMAN Incremental backup?"
Read the docs at http://tahiti.oracle.com for your version (which you didn't mention).
You ask: "What will be backup space and there size ?"
We have no idea. Are you going to create an image copy or a backup set? Read the docs and learn the difference. Are you going to turn on compression? Are you going to back up only changed blocks? We don't know.
You ask: "how to manage growing online archiving files?"
Again we can't help you without knowing your SLA. How many MG/GB are they? What period of time do you need to retain them to meet your SLA? When you figure this out back up to tape those you don't need to keep on the server.
You ask: "how to manage growing data and there disk space?"
This is one we can answer: BUY MORE DISK! That was easy.
You ask: "How we can give good performance our CPU and memory?"
Do you really expect that we can with zero knowledge of your environment, your version, your application, etc. distill into a few short paragraphs the collective wisdom of Cary Millsap, Jonathan Lewis, and the rest of the Oak Table Network membership?
Of course we can not. So what you need to do is buy Cary's book, Jonathan's book, and take their classes.
You ask: "we need keep all archive log in backup files or we need to remove old archive files?"
Remove the old ones after being absolutely sure you have a good backup.
You ask: "where we can take backup tape drive,SAN,disk removable hard disk? which one is better?"
No one solution is better than the other. They are all adequate.

Database restore from a particular backup set using rman

Hi all,
My OS: UNIX
DB : 10.2.0.1
As i checked the database it will indicate datafile 5 is header corruption.
yesterday i take complete online backup of the database using RMAN but now when i run restore database command it will show as
ORA-19870: error reading backup piece /cms/BACKUP/ora_BSCS_set149_piece1_20111206_4lmth1qj_1_1
ORA-19573: cannot obtain exclusive enqueue for datafile 6
Database is open and datafile is physically present there
So can anyone tell what to do next
Edited by: Vikas Kohli on Dec 9, 2011 9:58 AM

here are the result for the same:
Starting restore at 09-DEC-11
using channel ORA_DISK_1
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
147 Incr 0 1.10G DISK 00:14:10 06-DEC-11
BP Key: 147 Status: AVAILABLE Compressed: YES Tag: TAG20111206T085858
Piece Name: /cms/BACKUP/ora_BSCS_set149_piece1_20111206_4lmth1qj_1_1
List of Datafiles in backup set 147
File LV Type Ckp SCN Ckp Time Name
1 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/system01.dbf
2 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/undotbs01.dbf
3 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/sysaux01.dbf
4 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/users01.dbf
5 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/DATA.dbf
6 0 Incr 9068988016235 06-DEC-11 /u01/app/oracle/oradata/BSCS/users02.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
149 Incr 1 11.49M DISK 00:00:07 07-DEC-11
BP Key: 149 Status: AVAILABLE Compressed: YES Tag: TAG20111207T082737
Piece Name: /cms/BACKUP/ora_BSCS_set151_piece1_20111207_4nmtjkbr_1_1
List of Datafiles in backup set 149
File LV Type Ckp SCN Ckp Time Name
1 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/system01.dbf
2 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/undotbs01.dbf
3 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/sysaux01.dbf
4 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/users01.dbf
5 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/DATA.dbf
6 1 Incr 9068988069143 07-DEC-11 /u01/app/oracle/oradata/BSCS/users02.dbf
BS Key Type LV Size Device Type Elapsed Time Completion Time
151 Incr 1 115.07M DISK 00:01:24 08-DEC-11
BP Key: 151 Status: AVAILABLE Compressed: YES Tag: TAG20111208T075327
Piece Name: /cms/BACKUP/ora_BSCS_set153_piece1_20111208_4pmtm6nn_1_1
List of Datafiles in backup set 151
File LV Type Ckp SCN Ckp Time Name
1 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/system01.dbf
2 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/undotbs01.dbf
3 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/sysaux01.dbf
4 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/users01.dbf
5 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/DATA.dbf
6 1 Incr 9068988123314 08-DEC-11 /u01/app/oracle/oradata/BSCS/users02.dbf
no backup of log thread 1 seq 411 lowscn 9068988025356 found to restore
no backup of log thread 1 seq 412 lowscn 9068988167985 found to restore
no backup of log thread 1 seq 413 lowscn 9068988203392 found to restore
List of Archived Log Copies
Key Thrd Seq S Low Time Name
263 1 3 A 05-DEC-11 /u01/app/oracle/admin/BSCS/arch/BSCS/1_3_769127125.dbf
273 1 13 A 07-DEC-11 /u01/app/oracle/admin/BSCS/arch/BSCS/1_13_769127125.dbf
Media recovery start SCN is 9068988123314
Recovery must be done beyond SCN 9068988123314 to clear data files fuzziness
Finished restore at 09-DEC-11

Cold backup downtime using RMAN

Over the weekend I performed a cold RMAN backup on a 3.6 TB
database. Because a lot of the database was backed up with
transportable tablespaces, the net amount being backed up was
approximately 365 Gb. I took down the database at 11:00 and the
script finished at 4am, but in reviewing the logs, the database
actually appears to have been opened at 2am.
I assumed that the database would be down the entirety of the
backup. Can anyone help me understand why the database was
opened so long before the RMAN command completed? Was the
backup adversely affected in any way by a user obtaining access
prior to the RMAN process completing.
Any information greatly appreciated.

unfortunately i think you misunderstood the original question. i took the database down to do the cold backup. in order to use rman, you have to startup nomount the instance.
the script run was:
#!/usr/bin/ksh
rman msglog '/data2/oracle2/local/log/rman_lvl0.log' <<EOF
@connect.rman
run {
backup incremental level 0 tag full_bkup0 database diskratio=0;
alter database open;
exit;
EOF
exit
the "alter database open" tells RMAN to open the database once the backup is completed. i had a process running that checked each 10 seconds to see if the PID for the RMAN process was still running. The process itself appears to have run for an additional 2 hours after the database was opened.
there is nothing on the system to suggest that the database was opened by anything other than RMAN. was the database opened prematurely? was the additional time spent in the RMAN script doing the sync in the database? did the usage by the user prior to RMAN completing invalidate the backup? (so far the cloning is still running without error).

Backup database using RMAN

Hi,
I wanted to perform the first backup with RMAN and I used this command and I got error:
RMAN> BACKUP AS COPY DATABASE;
"can not backup or copy active file in noarchivelog mode".
But in order to turn on the log_mode to ARCHIVELOG, first I need to do shutdown the db and perform the backup. Right?
So how can I get my first backup using RMAN if the log mode is in NOARCHIVELOG mode?
I also performed this command successfully...
RMAN> configure controlfile autobackup on;
new RMAN configuration parameter are successfully stored...
but I'm not sure the controlfiles are being backed up. How can I verify this and where I can find the controlfile backup file?
Thanks,

So how can I get my first backup using RMAN if the log mode is in NOARCHIVELOG mode?You can do RMAN backups with DB in NOARCHIVELOG mode, but the DB must be MOUNTED and not OPEN. You can do something like the following :
$ $ORACLE_HOME/bin/rman nocatalog
Recovery Manager: Release 10.2.0.1.0 - Production on Thu Feb 9 01:18:08 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target
connected to target database: DB102 (DBID=XXXXXXXXX)
using target database control file instead of recovery catalog
RMAN> run { allocate channel d1 type disk;
2> shutdown;
3> startup mount;
4> configure controlfile autobackup on;
5> backup database;
6> sql 'alter database open';
7> }
I'm not sure the controlfiles are being backed up. How can I verify this and where I can find the controlfile backup file?
RMAN> list backup of controlfile;

Backup procedure using RMAN for 11i Instance

Hi,
we have 11.5.10.2 instance
Node 1 = Application Tier ( 11.5.10.2)
Node 2 = DB Tier ( 9.2.0.7)
as of now, we are taking daily cold backup of both instances.
we want to implement RMAN online backup for DB and take cold backup every week end only.
so, what are the best procedures for implementing RMAN for 11i Database.
Please share your experience, if you have anybody implemented?
which one you prefer in RMAN backup ( backupsets or copy option or backupsets with compressed option) interms of performance.. our db size is 60 GB only.
we apply apps tier patches very rarely . so we want to take RMAN online backup for DB daily and take cold backup for entire apps and db in the week ends.

Hi,
This time, i am going to implement for Oracle 11i Database. thats why, i need you guys advice regarding 11i Database.Well, the same is applicable to 11i/R12 databases. You just need to configure RMAN the same way you configure it on any standalone database.
If you have implemented any where RMAN, can you share, how you are taking RMAN backup? I can share the scripts we use for backup using RMAN. If you are interested, let me know and I shall send it by email.
if we want to clone, are you cloning the TEST instance with RMAN backup or using cold backup.We use both, depends on the time frame of the cloning task and whether it is possible to use cold backup for cloning or not.
Please have a look at the following notes, it should be helpful.
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
Note: 760772.1 - Cloning Oracle Application 11i /R12 with Rapid Clone - Database (9i/10g/11g) Using Hot Backup on Open Database
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=760772.1
Note: 362473.1 - Cloning E-Business Suite Using Hot Backup for Minimal Downtime of Source Environment
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362473.1
Regards,
Hussein

Backup/restore using RMAN with no catalog

Hi all,
Can someone tell me if this is correct:
I have two identical machines, same configuration and same file structure, everything is the same.
On machine A, I have a 9.2.0.7 database running. I take a hot backup and try to restore it on machine B.
Note: I am using RMAN for backup/restore whith no catalog.
This is how I perform backup on machine A:
ALLOCATE CHANNEL C1 TYPE DISK;
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
BACKUP INCREMENTAL LEVEL=0 CUMULATIVE format '/backup/level0_%u' BACKUP CURRENT CONTROLFILE format '/backup/control_primary' FORCE;
SQL 'ALTER SYSTEM ARCHIVE LOG CURRENT';
BACKUP ARCHIVELOG ALL format '/backup/archivelogs_%s_%t';
On machine B, here is how I perform restore:
SET DBID 1221334455;
RESTORE CONTROLFILE FROM '/backup/control_primary';
ALTER DATABASE MOUNT;
RESTORE DATABASE VALIDATE;
RESTORE DATABASE;
Recover database;
Thanks,

You forgot to restore the spfile or pfile on the second node to go to nomount state.
OR
You can use RMAN Duplicate to do this.
Regards
Message was edited by:
Singh

How to backup database using RMAN on another server's tape?

Dear All,
Please give me an advise what parameters I should set up in RMAN to backup database on another server's tape.
Best wishies,
Givi

I am connected to the database server from the server
where I have tape, but Rman is searching tape on
database server.I am not sure I understabd the above statement, but at the Operating System Level, you must ensure that from the Server you are running RMAN, it is configured to see the Tape Drive of the other Server. Once the Remote Tape is mounted with any name (say sbt) on the Local Server (however it is done with), then RMAN can configure the channels to use it.
If you cannot get this access at the Operating System Level, then do not bother trying RMAN to access it.

Need help with Backup Recovery using Rman - Point in Time.

Hi all,
I am trying to recover my database to a certain point in time. Here are the details below.
Oracle database version is. 11G R1. on 2 Node RAC. OS is AIX.
Database name is Sales.
Due to a mistake by the Application team, the database is written over by bad data. Now I have to restore the database in to a point in time, where the database was good.
For this, i took a whole (full) RMAN backup, everything, all the archivelog files and Controlfiles as well.
After doing this, i dropped the entire database. So now everything is clean.
Now i have to restore and recover the database to this point in time.. 03/16/2011 12:45:00
Please guide.
The backups are located at.. /backup/sales/rman/
I am trying various things, but each time i get the msg..
ORA-01507: database not mounted
I understand.. the reason for this message is the controlfile does not exist.. as the database is in mount mode. But as i said.. i have dropped the database in order to proceed with entire restoration.
But i have taken a whole backup.. which also includes the controlfiles + archivefiles.
Please guide.. with proper steps and commands.

Hi,
Priror to start with restore and recovery - Try to restore the control file from backups "/backup/sales/rman/"
Then further you can mount the db and further carry on with recovery (catalog the backups prior to recovery)
- Pavan Kumar N

Help me! cann't restore database using RMAN!!

i've backuped database using RMAN,
now datafile of system tablespace have lost,
and i execute the command as following:
run {
allocate channel c1 type disk;
restore database;
these are errors:
RMAN-03002: failure during compilation of command
RMAN-03013: command type: restore
RMAN-03002: failure during compilation of command
RMAN-03013: command type: IRESTORE
RMAN-06003: ORACLE error from target database: ORA-01843: not a
valid month
RMAN-06097: text of failing SQL statement: select decode(bitand
(festa,(4096+128)
),128,fecps,4096,fecps,0) ,decode(bitand(festa,
(4096+128)),128,281474976710655,4
096,controlfile_change#,0) ,decode(bitand(festa,
(4096+128)),128,SYSDATE,4096,con
trolfile_time,to_date('JAN 01 1988','MON DD
YYYY')) ,feofs ,feonc_scn ,to_date(n
vl(feonc_tim,'01/01/88 00:01:01'),'MM/DD/RR HH24:MI:SS')
into :b1,:b2,:b3,:b4,:b
5,:b6 from x$kccfe ,v$database where (fenum=:b7 and fedup=1)
RMAN-06099: error occurred in source file: krmk.pc, line: 21652

Try setting the NLS_DATE_FORMAT at the command prompt.

Issue Creating Duplicate Database on Different host using RMAN Backup

HI friends..
I m trying to create a duplicate db on different host ....... 27
i have live production db on ............. 15
its up 24*7.
i know how to create dup db using cold backup..but dont know how to create it using RMAN Backup..
I have googled..but getting issues..
Steps Taken till now
Note- I dont have catalog created on live db..
I already have set the tnsnames.ora on both servers
1) Took full backup plus archivelog plus control file on 15
2) moved it to another host..ie 27
3) now on live db..
I conected to rman target /
so i m now connected to prod db
than i try to conect to rman auxiliary sys/sys@dubpd..
But it gives me insufficient privilages error..
Can you tell me what to do next..Coz unless i get into mount phase on sever 27( new server)..i cannot use the control file from backup).my dupdb is up in nomount phase..but what enxt i can do..to restore the control file and than restore the backup after cataloging them to right path..
Thanks in advance frieds...

sai121 wrote:
Nope ..on live db..
@comand prompt when i type sqlplus sys/sys@dupdb..
its says 0ra-12518...Listener cannot hand off client connection..
My tns name for live server is..*primary* on live server .. whose ip is 15..(lIVE SERVER).
i also have another entery with tns names- standby .on live server .. whose ip is 27..(other server for duplicated db).
now @command prompt..@live server.. i did sqlplus sys/sys@standby
It gives me ORA-12518
Am i missing something..1- It could be a network problem. You may enable tracing on listener (and examine the logs).
2- Add "DIRECT_HANDOFF_TTC_LISTENER=OFF" to listener.ora, then reload the listener
3- You may want to increase "large_pool_size"

How to restore a table using RMAN with previous backup ?

Hi everyone,
we have to restore a table from 1 week previous backup using RMAN.
Could you show me how to restore a table using RMAN with previous full backup.
please Help me out.
Thanks
Info > oracle 10g, OS: AIX5L

Hi,
first of all you must have all the archivelogs since you want to recover your table from the previous backups.
anyways if you want to recover your table then you need to perform incomplete recovery to the point where you loss the table for that you need to restore and recover your database.you likely to loose all the transcation which occurs to the point where you you loose your table.
thanks..

Backup from 9i and restore this backup to 10g using RMAN

Hi all;
I have a database 9i on SuSE9. And I want to restore another server this database's backupsets to 10g on SuSE10 using RMAN. Then I have run following scripts.
On 9i Database: (SID=discoden)_
RMAN > backup database plus archivelog;
and I have three backupsets (05l87nik_1_1, 06l87nio_1_1, 07l87nml_1_1) and one controlfile backup (c-4279316798-20100310-00). then I copy these backuppieces to new server.
On 10g Database:_
+1. I have created udump and bdump folder into $ORACLE_BASE/admin/discoden/+
+2. I have copied init.ora, pasted initdiscoden.ora in $ORACLE_HOME/dbs folder. And I have changed following parameters+
db_name = discoden
shared_pool_size = 350000000
control_files = (/disk2/oracle/discoden/control01.ctl, /disk2/oracle/discoden/control02.ctl, /disk2/oracle/discoden/control03.ctl)
user_dump_dest = /opt/oracle/admin/discoden/udump
background_dump_dest = /opt/oracle/admin/discoden/bdump
compatible = 10.2.0.3.0
undo_management = auto
+3. export ORACLE_SID=discoden+
+4. cd $ORACLE_HOME/bin+
+5. ./rman target /+
+6. RMAN> startup nomount;+
+7. RMAN> restore controlfile from '/disk2/setup/c-4279316798-20100310-00';+
+8. RMAN> alter database mount ;+
+9. RMAN> catalog backuppiece '/disk2/setup/05l87nik_1_1';+
RMAN> catalog backuppiece '/disk2/setup/06l87nio_1_1';
RMAN> catalog backuppiece '/disk2/setup/07l87nml_1_1';
+10. SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo01.log' to '/disk2/oracle/discoden/redo01.log';+
SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo02.log' to '/disk2/oracle/discoden/redo02.log';
SQL> alter database rename file '/disk2/oracle9i/databases/discoden/redo03.log' to '/disk2/oracle/discoden/redo03.log';
+11. RMAN > list backup; (With this command, I have learned last sequence number. For example 204)+
+12. I have run following command on RMAN:+
+run {+
set until sequence 204;
set newname for datafile 1 to '/disk2/oracle/discoden/system01.dbf';
set newname for datafile 2 to '/disk2/oracle/discoden/undotbs01.dbf';
set newname for datafile 3 to '/disk2/oracle/discoden/cwmlite01.dbf';
set newname for datafile 4 to '/disk2/oracle/discoden/drsys01.dbf';
set newname for datafile 5 to '/disk2/oracle/discoden/example01.dbf';
set newname for datafile 6 to '/disk2/oracle/discoden/indx01.dbf';
set newname for datafile 7 to '/disk2/oracle/discoden/odm01.dbf';
set newname for datafile 8 to '/disk2/oracle/discoden/tools01.dbf';
set newname for datafile 9 to '/disk2/oracle/discoden/users01.dbf';
set newname for datafile 10 to '/disk2/oracle/discoden/xdb01.dbf';
set newname for datafile 11 to '/disk2/oracle/discoden/DATASPACE1.dbf';
set newname for datafile 12 to '/disk2/oracle/discoden/CARDEM.dbf';
set newname for datafile 13 to '/disk2/oracle/discoden/MUHASEBE.dbf';
set newname for datafile 14 to '/disk2/oracle/discoden/ORTAK.dbf';
set newname for datafile 15 to '/disk2/oracle/discoden/MAGAZA.dbf';
restore database;
switch datafile all;
recover database;
alter database open resetlogs;
+}+
Then I have an error like following lines:
+..........+
media recovery complete, elapsed time: 00:00:04
Finished recover at 06-MAR-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00601: fatal error in recovery manager
RMAN-03004: fatal error during execution of command
ORA-03114: not connected to ORACLE
ORA-03114: not connected to ORACLE
RMAN-03002: failure of alter db command at 03/06/2010 09:00:47
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
ORACLE error from target database:
ORA-03114: not connected to ORACLE
I don't understand the mistakes. I hope your helps. Thank you.

Hi,
You have followed the steps correctly while restoring and recovering the 9i database under 10g home using RMAN except the last step of opening the database.
Remove 'alter database open resetlogs;' from the rman script and rerun the script. Once the database is restored and recovered, open the database with RESETLOGS & UPGRADE option through SQL*Plus as below.
SQL> alter database open resetlogs upgrade;
Once the database is opened, create the SYSAUX tablespace and run $ORACLE_HOME/rdbms/admin/ upgrd.sql catupgrd.sql script to upgrade the database to 10g ( follow the steps for upgrading the database).
MetaLink Note : 369644.1 - Answers To FAQ For Restoring Or Duplicating Between Different Versions And Platforms
Regards,
Vaibhav
Edited by: Vaibhav on Mar 11, 2010 11:09 AM

To restore backup on different host using RMAN

Hi All,
Friend I need your help once again. I want to restore my database from the past backup to new HOST by keeping the original database intact using RMAN. Let me explain the scenario:-
Databas Version - 8.1.7
OS - Solaris 5.8
We are using RMAN with Tivoli as third party media management. I just need to restore the database from this tape library using RMAN with recovery catalog on new server. The only doubt I have is how I will make the backups of the production database whose backup has to be restored available on the new host where I have to create new database.
I will be using different file structure for the newly restored database. Do I have to create TDPO files seperately on the server on which I have to restore the database.
Please reply asap.
Regards
Harpreet Singh

You need to create a tdpo.opt file of source on the destination database. Then, allocate channel using this TDPO_OPTFILE and recover database.

Backup SunMC Using RMAN

Similar Messages

Maybe you are looking for