Bad Position Volume Button!
Anybody else have a problem with the volume button getting pressed as you hold the iPad2 in your lap? I ssit on the couch, feet on an ottoman, iPad2 propped on my lap with the Smart Dcover folded under, and as I shift the iPad around, the volume button will decrease! It seems to me this is a bad position for a toggle switch on an edge that is frequently positioned against your lap! With it in this place, there needs to be a lock, either software or hardware, to keep it from fluctuating. Any thoughts?
Is it not in the same position as on the original. No matter where they put it, someone will complain that it is in a bad position.
Perhaps you should condition yourself to use the device that you have, not the one that does not exist.
Going on two weeks with an iPad 2 and have never accidentally changed the volume.
Dah•veed
Similar Messages
-
I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
"Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
Thanks,
JohnnyFixed! Ran disk utilities and repaired my external HD.
-
Volume button stuck in down position
my volume button is stuck in the down position on the + side. How can I fix this? Is there a fix for this? Appreciate any help.
I had a broken home button within 6 months. It was replaced under warranty. Now I have a broken volume up button less than a year later. They want $65 to fix with 90 day warranty. This is a major defect and they should have recalled these units. It is insane that they are still ignoring this problem and telling people to pay to have it fixed. I'm filing a complaint against Apple.
-
My iPad4 lives in a smart case, it never even goes out of the house. I baby it to be honest. So why, I ask you, did the volume button suddenly stop working? I tried all the suggested software and general settings I could find but it appears to be a hardware issue. I hope I'm wrong. I can decrease volume down to mute without effort but the volume 'up' function is totally kaputt. Maybe somebody has experienced this problem and found a solution? I'm bummed that my (otherwise) perfect little iPad now has an annoying flaw. - Thank you
Gormenghast
I would also suggest RMA for that. You can contact support at http://us.creative.com//support/custsup/
Jason -
Nokia Lumia 620 Volume button not working,
Well, first of all after i bought this mobile the camera button stopped working(not fixed till now) and now the freaking volume button ain't working without a **bleep**ing reason.. And don't say the cover is damaged its not also don't say stupid things like restart the phone because OBVIOUSLY THAT'S WON'T WORKING OR WON'T HELP.. YES I'M COMPLAINING its not the first time that I open this forum and ask about a problem and in the end tada I don't get any **bleep** nothing of your solutions works really bad altitude from Nokia as its a new phones company can you test the freaking phones before giving it to shops?.. I need an answer and i did nothing so that stop working it stopped suddenly without a reason.. answer me asap,
I was going to take it to Nokia care but duh? Should the button stop working suddenly? Without anything wrong also the same with the camera button also I'm not the first one to have this problem right? Then its not our problem but its Nokia's I thought there's another solution, but yeah I'm making angry posts can you just make good products? I see all the people complaint about that button **bleep**, you better not talk while maybe the problem from th company.
-
IPod Nano 6th Generation Volume Button Issue
The "-" volume button on my iPod Nano 6th generation is stuck in the "on" or depressed position against the case. It looks like the button either is binding against the case, or a spring-like mechanism beneath the button is broken.
Any ideas on how to fix the issue short of taking it in for a service appointment? Maybe by opening the case?
AIf you open it or have a 3rd party repair site work on it you will no longer be eligible for an out-of-warranty replacement from Apple at a price of $65/$75 (make a Genius Bar appointment before going.
You can buy the switch and replace it but be sure you are up to it. Check http://www.ifixit.com for teardown instructions. -
I am having problems using my ipod 7g with Nike Fitness. When running when I press the button between the volume buttons, I get a different action almost every time. And usually I end up either turrning volume up very high or ending the workout. I need to be able to pause workout, and get spoken feedback regarding time, distance, and pace, that's all. I'm using a Griffin brand armband, that covers all of the buttons. I've read the online manual. no help. I'm just about ready to return it and go back to my 5th gen with its smaller song capacity and no blurry. Any help or suggestions very welcome.
Jeff:
I have had both good and bad experiences with Acronis True Image. I got the recent copy of ATI via a Newegg.com bundle. I haven't tried it yet on any Windows 7 editing systems. ATI installs some services that I would rather not have running in the background.
What made you change from ATI to ShadowProtect Desktop Edition?
Are you running Windows 7?
What do you see as advantages to running ShadowProtect Desktop Edition as opposed to Acronis True Image?
Thanks -
How to position two buttons on top of div element inside a div container?
Hello!
Good news...
I have created my very first thumbnail slider for my website that actually works!
Bad news...
The buttons that help scroll the div element, which is wrapped inside a center container, are no longer positioned on top of the div.
Here is the html:
<div id="centerContainer">
<div id="aemcSlider">
<ul>
<li>
<a class="aemcPkgBut" href="" target="" alt="AEMC Packaging" title="AEMC Packaging"> </a>
</li>
<li>
<a class="aemcGroundFlexBut" href="" target="" alt="GroundFlexAd" title="GroundFlex Ad"> </a>
</li>
<li>
<a class="aemcClampBut" href="" target="" alt="Clamp-On Ad" title="Clamp-On Ad"> </a>
</li>
<li>
<a class="aemcMetrixBut" href="" target="" alt="Metrix Ad" title="Metrix Ad"> </a>
</li>
</ul>
</div>
<div id="leftBut">
<a class="arrowLeft" href="" target="" alt="Left" title="Left"> </a>
</div>
<div id="rightBut">
<a class="arrowRight" href="" target="" alt="Right" title="Right"> </a>
</div>
</div>
Here is the CSS:
Main container:
#centerContainer
{width: 800px; margin: 0 auto; background-color:#0e210e; position:relative}
Div Element:
#aemcSlider
text-align:center;
list-style:none;
width: 450px;
height: 114px;
margin: 0 auto;
padding-top: 0px;
padding-right: 0px;
padding-bottom: 0px;
padding-left: 0px;
top: 67px;
position: relative;
overflow: hidden;
#aemcSlider a {margin-right: -12px;}
Left & Right Buttons:
a.arrowLeft
width: 29px;
height: 96px;
float:left;
position:absolute;
margin: 0 auto;
display: block;
background-image: url(../Images/arrowLeft.png);
background-repeat: no-repeat;
left: 311px;
top: 91px;
opacity: 0;
a.arrowLeft:hover
background-image: url(../Images/arrowLeft.png);
opacity: 0.5;
a.arrowRight
width: 29px;
height: 96px;
position:absolute;
float:right;
margin: 0 auto;
display: block;
background-image: url(../Images/arrowRight.png);
background-repeat: no-repeat;
opacity: 0;
left: 720px;
top: 92px;
a.arrowRight:hover
background-image: url(../Images/arrowRight.png);
opacity: 0.5;
Here are the things I've done to troubleshoot:
If I put the div element as an absolute container, the left button disapears.
I get the same effect when I change the position to relative.
I tried changing the position to relative for both buttons.
I also tried to position the buttons outside the Main Div container and no go.
How can I position the relative div element under these controller button?
Any help would be muchly appreciated.
~LAOK,
Got the site onto a public web space.
Here sre the links...
http://www.aliciaalmeidagraphicdesigner.com/Work.html
http://www.aliciaalmeidagraphicdesigner.com/style/Body.css
http://www.aliciaalmeidagraphicdesigner.com/js/functions.js
Anyone can help me out, please?
Thanks!
LA
PS: Dissapointed...my website looks much better from my local file than remote -
Show Track Volume button missing
I'm trying to edit clip volumes in the timeline and I have no 'Show Track Volume' button. The button is simply not there. Do I need to enable this button or the the software corrupt?
Cheers!That depends: what version are you on?
If you're on CC7.x or 2014.x, then right-click in an audio track header, in the vicinity of the Mute and Solo buttons. In the context menu, select "Customize..." Then drag the Track Volume control from the Button Editor to the desired position in the track header. -
I have been experiencing a weird behaviour on my iPhone since yesterday. As every one aware the volume up/down button is sensitive , and the down button is too sensitive in my iPhone (Sometimes I won't even feel I am reducing the volume) . It's happening frequently from y'day that , my ringer volume is reduced to max low without even touching the volume button (When I am on the screen as well as off the screen). If it happens when I am on the screen , ringer icon stays on top for some time (app 1 min). When I tried to increase the volume , its not allowing me todo so. If I give about 5 mins ,every thing back to normal.
I am suspecting , the down volume button getting struck in some position and causing this behaviour or Is it do with the firmware upgrade(1.1.1), I did 2 days back. Could any please advice how to proceed on this??
Thankssent74 wrote:
As every one aware the volume up/down button is sensitive , and the down button is too sensitive in my iPhone (Sometimes I won't even feel I am reducing the volume) .
Everyone is aware it is sensitive...I don't think that is the case. I own two iPhones and both have volumn buttons that are not sensitive. I have never accidently changed the volumn and when I do try it takes a good amount of pressure for a click of the buttons (not saying I have to push hard, but it is by no means sensitive). It could just be you got a iPhone that just happened to be sensitive. If it a big concern to you, I would suggest an Apple Store where you can show them it is sensitive. They may swap phones for you or at least fix yours. -
Why does it say headphones when i use the volume buttons
why does it say headphones when i use the volume buttons instead of volume when the headphones are not plucked in?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
I need some help to move volume button in flash file.
Hello,
If anyone can help with this 2 issues I’ll be very glad.
I have this swf file to which I need to move the volume button to another place because my flash will be smaller and the button its not visible there. I have a picture attached with correct position. Actually I haver managed to move it myself using Adobe Flash Pro, but as I export the fla file to swf it results a mess. I have tried also with Sothskin Quicker with same results.
2. I need the main pictures to have direct links to my prefferance i.e. www.mysite.com/forum. I don’t know where to enter it.
I attached the 1Mb rar file with swf , xml and correct position. http://www.fileswap.com/dl/hihoGYdQZx/
Thank youTry downloading the installer(s) from the links in http://forums.adobe.com/thread/889580
-
Iphone 4 volume buttons not working
iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!
This could be due to some debris or dirt inside the headphones jack that makes the iPhone think that the headphones are connected even when they are not.
Try to see if you can clean the jack being very careful, with canned air as sold in electronics store. Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
Avoid introducing anything else like a pointed object. You could damage the jack.
If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets. If the problem continues after this, take it to an Apple Store to see what they believe should be done. -
Hp envy 6 1040EW audio volume buttons don't work
hello, i'm new to the forum
i have a problem with my HP Envy Ultrabook 1040EW with the volume buttons (f9, f10 and f11 )
they will only work when i have opened the beats audio application or i've clicked on the speaker sign
were you can slide the volume up and down.
if anyone has the answer or the same issue please reply.
Thank you very muchBartB,
Access the BIOS menu and reset the factory defaults.
1. Shut down the laptop
2. Restart it and tap the F10 key repeatedly
3. It should lead you into the BIOS menu
4. Press F9 to load defaults and then F10 to save and exit
The compuer should then restart and take you back to your main desktop screen. Once there test out those 3 keys.
Please respond back with your results.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
This thread concerns IOS 7.1.2. update and the subsequent loss of volume button functionality and use of internal speakers.
Please can someone help from the mac team!
It's not a jailbreak phone. The phone is a replacement from Apple and the volume buttons are virtually won't work for certain functions on the phone. Here are the symptoms:
When the volume buttons are pressed on the home screen i get "ringer" and the speaker symbol appear but nothing more (ie. +/- volume)
When playing back from iTunes with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
When i playback Youtube content with no headphones in, I get nothing through the internal speakers, nor do the volume buttons work, nor is the volume slider visable.
With headphones plugged in sound is audible and volume buttons work.
Whilst using voicemail, (no headphones connected) i can play the message through the speakers and control volume using side buttons.
I have restored the phone and this has not fixed the problem.
iPhone 4S, iOS 7.1.2. upgradeHey there jeremy,
It sounds like your Volume buttons aren't working correctly and you are also not getting sound from your built in speaker. I would start by quitting all the running apps on your phone:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
All the best,
Sterling
Maybe you are looking for
-
?
-
Problem with Adobe Reader X on a Windows XP
When I try to open a PDF my screen blacks out for a second then comes back on and everything is huge and distorted. Does anyone know a fix for this? Should I download an older version of Adobe? Thank you for any assistance.
-
Hi all, I was wondering if you can have mulitple forms of payment in a single transaction when making a purchase at in store or online? My case is that I have 2 reward certificats avaible to use as well as 2 bestbuy gifts cards that were given to me
-
Frequently transfering databases between MS SQL and Oracle
Hello all, I am looking for a solution to easily, efficiently and be able to migrate/transfer databases between MS SQL and Oracle frequently. I need to be able to replicate a databases on Ms SQL and Oracle for testing purposes. I will need to do this
-
Are there any ways to disable the Top In App Purchase?
Thanks for your help.