Bad update push is causing system errors

Way to go Apple. Pushing out an update that is broken and now application is broken AND causing system errors (see all other comments). Get you act together and fix this ASAP. Just because we are Windows users, don't punish us.

Similar Messages

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

NiRFSA_ReadPowerSpectrumF64 function call in TestStand 4.5.1 cause system error

I am using TestStand with niRFSA.dll to call the function niRFSA_ReadPowerSpectrumF64. This function will make the NI RFSA takes a spectrum sweep and return an array of amplitudes, as well as a structure that contains the frequencies information. My teststand sequence file is attached. The sequence editor will execute this function call, and actually retrieve correct data from the RFSA, I can see all the data in the Locals variables. The data are correct. However, the sequence editor also throws out system error, with no further details.
See the error window also attached.
Once in a while, the sequence editor will work just fine, executing the same function call without throwing out error, this is less than 10% of the time.
I am using this on Windows 7.
Let me know if you have any insight.
Attachments:
RFSA Sequence.seq ‏7 KB
Capture.JPG ‏33 KB

Hi Doug:
Yes this is what I suspected also. Since the container type was a TS custom type I created to accept the C struct from the instrument. But when the data come back from the dll is a C struct, and there lays the conflict, I think its the packaging layer semantics have some conflict, even though each of the element in the C struct matches the TS type definitions, as I received all that data correctly in TS.
Thanks,
Juswanto

Hi I am using MAC OS Yosemite10.10.3 and I have a problem to update my photoshopCC cause of error U43M1D204 eventhough I have deleted AAm Updater/1.0/ but It still not worked. How can I fix it.

Hi, I am using MAc OS 10.10.3 and I have a problem to update my photoshopCC because of error U43M1D204. I have deleted AAm Updater/1.0/ but it still not worked. How can I fix it please help.

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

Adobe automatic sends update notices which cause system crashes.

Adobe occasionally sends out updates for its reader and/or flash player. These updates disrupt various systems on my computer, including Firefox.
Various systems freeze before the Adobe update notice appears. When they freeze (for example: I use a laptop with a plug-in keyboard and mouse; they keyboard and mouse stop working) I now know that I will soon see an Adobe update notice.
I would like to set up Firefox so that I can block these automatic update notices from Adobe.
I have tried to solve these problem through the various help options on the Adobe site without success.

What you are experiencing is called a Kernel Panic and is NOT caused by the OS, they can be difficult to troubleshoot as they can be software or hardware relate. The X Labs writes and excellent article about them, in Kernel Panics. Please read it carefully. In order to troubleshoot your KP you need to post your last KP log, Apple provides instructions for doing so in How to log a kernel panic. Please follow the instructions in that article and post your complete KP report.
As mentioned previously it is NOT caused by OS X! There are common causes, including RAM issues, outdated applications, hard disks failing etc. By posting your KP log we can look at it and determine if it's software and if it is then point you to what is causing the issue.

Update to JRE causes license error

We have been advised to update our CF8 enterprise servers to
the newest version of JAVA. When we do this it generates this error
message:
"Same Serial Number found on another ColdFusion server.The
server may be out of compliance".
How should we update the JRE in CF 8.

Wally Randall wrote:
> We have been advised to update our CF8 enterprise
servers to the newest version
> of JAVA. When we do this it generates this error
message:
>
> "Same Serial Number found on another ColdFusion
server.The server may be out
> of compliance".
That is not an error, that is a warning. One that you can
safely ignore
(from a technical perspective at least).
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Discussions Account couldn't be updated due to system error?

Like everyone else, I was excited to check out the new Support Communities design and functionality when it was launched on Saturday. Unfortunately, when I tried to sign in, I got a message that said: "We're Sorry. Your account couldn't be updated due to a system error." It gave me a short form to fill out for help. I did that and still am not able to sign in. Right now, I'm writing from an old Apple ID in order to post this message. The ID that I normally use (and can't use now) has lots of posts, points, etc, and I really need to recover that.
Interestingly, if I search for the username associated with that Apple ID, it comes up and shows all of my posts and my profile, with all of my points intact. So, the information is still there...I just can't access it. Also, the ID works everywhere other than the Support Communities (such as iTunes Store and Apple Store online).
Has anyone else run into this problem? If a Host happens to see this, I'd love any suggestions as to how to get this straightened out. I was quite active on the old discussion boards and would like to continue to be on the new version!

I got an email directly from the apple person who manages the support communities. He's been helping lots of people out with the transition. It turns out the root of my problem was having the same email address associated with the two different Apple IDs as the "primary email address." If you have two IDs, that could also be your problem. Make sure they all have different email addresses.

HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

It doesn't matter and doing a manual install will not fix the problem either. I'm looking for a solution but no luck yet. I think Apple has given us a bad update.

System Error: Logon failure: unknown user name or bad password

Hello experts,
my system NW2004s (SPS14.1) is producing a lot of the following error messages caused by the internal user Guest... The system user Guest has all the necessary rights using a service user.
*getting mapped math - java.io.IOException: Logon failure: unknown user name or bad password*
at java.io.WinNTFileSystem.canonicalize0(Native Method)
at java.io.Win32FileSystem.canonicalize(Win32FileSystem.java:333)
at java.io.File.getCanonicalPath(File.java:513)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalPath(StdFileImpl.java:74)
at com.sapportals.wcm.repository.util.file.StdFileImpl.getCanonicalFile(StdFileImpl.java:70)
at com.sapportals.wcm.repository.manager.sfs.FSRepositoryManager.startUpImpl(FSRepositoryManager.java:141)
at com.sapportals.wcm.repository.manager.AbstractRepositoryManager.start(AbstractRepositoryManager.java:538)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler.tryToStart(CrtThreadSafeComponentHandler.java:246)
at com.sapportals.wcm.crt.CrtThreadSafeComponentHandler$1.run(CrtThreadSafeComponentHandler.java:252)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:382)
I am not sure about the severity of the error. I can observe the error message almost every minute in the Log file and I have the impression that this message occours more often before the portal has more "problems" in general and is for a short time not accecible (it freezes and sometimes a java server restarts itself). I am asking myself if this error message could give a hint for the system crash we have had today. (a restart of the host was needed.)
However I would like to know what causes the error message?
It is a critical error message? It means can it cause a system crash? Or is it not important?
What can I do to solve the problem?
I appreciate your helful answers.
Thanks in advance.
Thomas

I think the password for the proxy account needs to be changed (expired)
Arthur My Blog

N97 system error after software update

hello there...
I've recently updated my N97 software to 21.0.045 (the last one)... and right after the update is finished, it gave me "system error" on installing... and now I can't get access to the clock, the calender and others... it even stops responding for a while each time I open sittings... and there is no theme effects when the screen flips to landscape even if it is on... please people, I really need help in that, the clock, alarms and the calender are soooo important for me !!!
thanks
Any fool can make things bigger, more complex and more violent. It takes a touch of genius and a lot of courage to move in the opposite direction.
Solved!
Go to Solution.

psychomania wrote:
I'm not being offensive. Just stating facts.
I am simply highlighting the fact so that the user will see it and be aware of what you suggested would do. Sorry if you took offence at that but the user comes first.
of course customer first , i'm doing this with happiness , cause i'll be very happy to help them without reaso
psychomania wrote:
starting petty arguments to cover up your mistakes like you did yesterday.
i'm not covering up my mistakes , what mistakes do u mean ?? yesterday , i said that i said that because it's in Nokia warranty of the authourised nokia resellers in my region and didn't know that this doesn't apply all over the world
psychomania wrote:
This forum exists to help people, not for you to spam posts without thinking about the consequences.
it's not for me, it's for all NOKIA users, and i'm not spamming as if i was that, so how could i stay all that time, solving others problems with alot of thanx
even if i solved 2 problems , that proves that i'm not spamming
so .... welcome bro in NOKIA USERS discussion board
-you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
-if my answer was the solution , so click accept as solution button
Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

10.7.4 update causes system lockup

Hello, I have Mac Pro (2006) with ATI Radeon 5770 (Apple Genuine) and 10.7.4 update causes system lockup.
I installed 10.7.4 update via software update and the update works fine.
But, after a couple of minutes, there are artfacts on display and the system locks up except for a mouse cursor or the display goes blank.
Obiously, ATI 5770 is overheating but on Windows 7, I run FurMark for an hour to see if 5770 is broken or not and no problem found.
So I reinstalled 10.7.4 (combo), reset PRAM & SMC. I found out about SMC error https://discussions.apple.com/thread/3940135?tstart=0 and replaceed AppleSMC.kext from 10.7.3 by using KextHelper but no luck.
I did clean install of 10.7.4 and everything seemed okay but the system locked up during the Setup Assistant.
I restroed the entire system (10.7.3) from Time Machine and am out of ideas. Does anybody have a simular problem?
btw, MP is upgraded to 2 quad core x5355 and to the firmware MP2.1 (2007)

Update.
I ran Quartz Debug and disabled Quartz Extreme to see what'll happen.
No more system lock-up nor artifacts!
I reported to Apple and hope they're gonna fiz it soon.

KERNEL Security Update Causing System Havoc

MAY KERNEL PATCH CAUSES SYSTEM HAVOC
We regularly update our patches, including recommended kernel security patches for Solaris 10.
However, two days ago upon attempting to load the weekend Solaris 10 security patch (the latest as
of this writing), the system indicated that the install had failed. After that, it was all downhill and as
of today our main server is completely down.
Being based on a ZFS file system didn't particularly help either as it appears that whatever problem
was generated by the botched init5 installation of the Kernal Security patch got copied to the mirror
disk, because the despite the failed installation the bootarchive was "updated" before shutdown
and there didn't appear to be any way to restore from the mirror.
What few errors I could view before even rebooting failed had to do with PCI and basic boot-time
mounting. Currently, there is not even enough time for any text to appear on screen before the
system reboots again (i.e. a reboot-loop).
It appears there is no choice in a case such as this other than to restore from a zfs snapshot and I
am not even sure that will work with no functioning kernel! I'll try it from fail-safe.
Somehow I feel I am not alone this weekend as a frustrated system administrator. What has been
most frustrating is that this was not an optional patch, but a kernel security patch which most of
us would conscientiously add!
Anybody been here, done this? Is there a "best procedure" in this case?
Thanks for any help you can provide on restoring after a botched kernel update!
Gunnar K. A. Njalsson
The SPACEPOL Corporation

We switched to Windows Server 2008 Enterprise this week, partially as a result of the problem above and not having
a simple and straight-foward solution to recovering backup snapshots.
In my opinion this is a real weakness with ZFS and the Solaris operating system. It should essentially be a no-brainer
that there exist a simple file system-integrated solution that does not require all of the extra calculations, mirrors,
commands and set-ups which are currently part of Solaris and ZFS. These are valuable tools, but in the case I
mentioned above, the major problem was a false sense of security provided by all of the hype about ZFS and
mirrors.
It only took a botched official update to copy the errors to the mirror and thereby loose our data and make
recovery a very intricate process which we did not have time to do. Windows Server provides us with a simple
interface for backing up our data and server on a separate disk at times of our choosing and with a recovery
or restore option that is intuitive and just as simple as backup.
I love Solaris and Sun and share much of the philosophy of UNIX and related tools. However, in a security-focused and
critical production environment such as ours, it's not a matter of my personal likes and dislikes; but a question of
being able to get typical system administration tasks done simply, even if they have to be left to non-computer scientists
at times. Solaris worked well for a year, but when the kernel became corrupted by an update, everything was lost.
That's too much risk!

Rollup 8 for Exchange 2010 SP2 causes EWS error with bad parameter for Exchange.MailboxReplicationService.ProxyService

When I installed Rollup 8 for Exchange 2010 SP2 it caused an error in EWS
EWS failed with the error:
exchange web service could not load file or assembly Exchange.MailboxReplicationService.ProxyService bad parameter
When I uninstalled the rollup all worked fine again.
Any ideas, Thanks in advance?

Hi,
To apply this update rollup, you must have Exchange Server 2010 SP2 installed. And remove all interim updates for Exchange Server 2010 SP2 before you apply this update rollup. Please check your installation deployment by the following article:
Install the Latest Update Rollup for Exchange 2010
http://technet.microsoft.com/en-us/library/ff637981.aspx
Description of Update Rollup 8 for Exchange Server 2010 Service Pack 2
http://support.microsoft.com/kb/2903903/en-us
If all requirements and preparations are configured properly, please collect your error logs to check your installation. It would be helpful to post some event logs here for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

Why does Mozilla Plugin Check keep giving me a Systems Error? I can't update my plugins otherwise!

No sooner than I log into Plugin Check, it keeps telling me "Systems Error Please try again Later", every single time without fail! I'm sick of not being able to view videos without my Adobe flash player crashing on me! At least on my other Firefox browser on Linux, my 3rd party Plugins come in an update packet, unlike XP, which requires us to Manually update the damn things!

* Does the problem happen in a [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#w_creating-a-profile new profile]?
* Does the problem happen when security software is temporarily disabled?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

System error in Funds Management update

Dear you,
Have anyone seen the following when updating FM from FI document:
"System error:Funds management update (FMRI, CHECK_WE_RE)"
Any ideas what to do?
Thanks
Sonja

Hi there,
The update problem occurs both if we try to post with FB50L or if I try to make a transfer of FI postings in FM. This all happens in the new installation where we plan to use new GL and FM.
This note you gave did not ring a bell for me
The error message is FI057. But we have not yet found a suitable note.
Therefore any ideas are still welcomed.

Bad update push is causing system errors

Similar Messages

Maybe you are looking for