BADI before saving BP

Hi All,
I need to check for certain data changes before saving a business partner using transaction BP in CRM. If there are any unwanted changes I need to throw an error and should not allow to change the business partner using transaction BP.
For this purpose I found BADI BUPA_FURTHER_CHECKS and implemented the BADI method CHECK_CENTRAL. I have put a break-point in the method but it doesn't stop.
I have activated the implementation of the method and BADI but still doesn't work.
Has anyone successfully implemented this BADI? or is there is any other BADI to solve my problem?
Please let me know if anyone has answers.
Points will be rewarded.
Thanks in advance.
Sonali.

Hi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul.

Similar Messages

MB1B User exit or Badi before saving transaction

Dear friends ,
I need to identify a user exit or badi that I can use to populate one field in tcode MB1B before saving.
How could I find it ?!
best regards,
Ale

Hi Alessandro,
Hope you find this useful..
For Finding user exits
[http://www.erpgenie.com/sap/abap/code/abap26.htm]
Find a BADI called from within an SAP transaction
The following steps will allow you to simply find a BAPI that is linked to an SAP transaction code.
1. Execute transaction SE37 or SE80 and find function module 'SXV_GET_CLIF_BY_NAME'.
2. Insert a breakpoint in it.
3. Now go to the SAP transaction you want to find a BADI in.
4. When you execute it, it will stop at the above function module.
5. Look at the value of field EXIT_NAME.
6. This will provide you with the name of the BADI that is available in your SAP transaction code.
This technique can be used to find out the BADI for given transaction.
Follow below steps.
Go to transaction ST05, select buffer trace and click on activate trace button.
Now run your transaction code for which you want to find out the customer exits.
Go back to ST05, click on deactivate trace and display trace.
A popup screen "Set Restrictions for Displaying Trace" appears. Now, filter the trace on Objects V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. The BADI name is the name after the IF_EX_.
E.G: in the name IF_EX_ME_PROCESS_PO_CUST BADI name is ME_PROCESS_PO_CUST.
How to find BADI
1. Go to the TCode SE24 and enter CL_EXITHANDLER as object type.
2. In 'Display' mode, go to 'Methods' tab.
3. Double click the method 'Get Instance' to display it source code.
4. Set a breakpoint on 'CALL METHOD cl_exithandler=>get_class_name_by_interface'.
5. Then run your transaction.
6. The screen will stop at this method.
7. Check the value of parameter 'EXIT_NAME'. It will show you the BADI for that transaction.
Regards

Need an Exit/BAdI before saving RFQ using ME41

Hello,
I need to put some check before an RFQ is created using ME41. Using the package ME, I had searched for Exits/BAdIs, but can't find one which says this can be used for ME41. Can someone give me which of the User Exits/BAdI can be used for my pupose? Thanks in advance.
Regards,
Abijith

When the business saves an RFQ document via ME41, ME42 or ME47 tcodes, SAP will not overwrite the existing Purchasing Group value in the corresponding PIR(Purchasing Information record). can u suggest any user exit/badi?

BAdi or User exit to use in MB26 to avoid posting before saving of mat doc?

Hello Experts,
Can anyone tell me which BAdi or User exit to use in MB26 to avoid posting before saving of material document?
I have requirement to stop posting incase of negative invetory in issuing storag location.
Thanks

Hello,
The issue is currently we alllowing the negetaive stock at storage location level.At this movement , we want to avoid the negetive stock creation while posting the Mat doc with MB26.Before saving the material document I want check the stock levels in MARD , if the stock levels goes negative from this posting, then I want to stop the document posting.
Thanks

User exit, badi or enhancement to validate data before saving for qm02

Hi,
Currently, I have a requirement to validate the data of a notification before saving data in Tcode qm02.
I have found an user exit to check data for tcode qm02. It works for task tab, I mean I can get the data under task tab of qm02 and do the validation. However, for the tab processing: I want to validate the partner name before saving but I can not get the list of partners which is in Processing tab.
Please let me know if you could show me the user exit, enhancement, or Badi so that I can validate the data under processing tab in qm02.
Thanks in advance,
Hung To

Hi Keshav.T,
Currently I am using this exit to validate data for the tab "Task". However, for the tab "Processing" I can not get the data, let say Partner, to validate.
Thanks,
Hung To

How to read the status changed in crmd_order txn before saving it to DB.

hello all,
My requirement is to perform some checks after the user changes the status
( Before saving it to DB i need to do some checks )
I could find the BADI and Fm's for checking conditions.
My question is i need to check for a particular status change how do i trace that that particular status which i need to capture has been changed??
i could see some FM's but it is only fetching the staus save in DB.
how do i trace the status just after user changes before saving it to DB.
it's an urgent requirement............pls help me on this..........
pls get back to me if u want more details.........
Thanks,
Shiva.

Hello.
Have you figured this out yet? We are having the same problem.

How do I add a validation prompt before saving a form?

Hello
I have a registration form for a family camp. The first page collects the personal information and the second page calculates a financial total. I don't have LifeCycle and designed this using Adobe X Pro. I use a third party data extractor tool for forms returned to move the typed information into Excel. The problem I'm running into is a lot of people don't scroll and complete the second page of the form before saving and submitting it. This results in incomplete information when we extract to Excel and more work for us to process the application.
My thoughts are this could be partially remedied if the user received a prompt when they go to save the form or after a certain field was completed (perhaps clicking the "I agree" button) that asks them to double check to make sure they completed the second page. Similar to how if they try to type in letters in the phone number field they receive a message that they can only use numbers.
The problem I'm having is I have no idea if we can create a prompt when someone goes to save the form, or if I can trigger a prompt for after someone completes a particular field and how to go about doing either? Does anyone have any suggestions on how I can accomplish this or where I can look to for some further help?
Thanks!
Neil
PS Here's the form I'm working on - http://accwesterncamp.com/wp-content/uploads/2015/03/Western-Camp-Application-2015-Fillabl e.pdf

Sorry for the link that turned bad above. Here's a functional one: http://accwesterncamp.com/wp-content/uploads/2014/10/Western-Camp-Application-2015-Fillabl e.pdf
Ultimately I have decided against continuing to work with a PDF fillable. The functionality I ultimately wanted was too cumbersome. In doing additional research I came across Adobe Forms Central which is being decommissioned. In the FAQ section I found a recommendation for an online form design service called Cognito which I ultimately decided to go with. This service allows registrants to register multiple people, pretty robust form logic, and process payment all at one go. The cost is very small too. If you would like to see how the digitization and online processing of the form turned out you can see it here: http://accwesterncamp.com/registration/
Thanks for all the help and recommendations in the forum though!

MIGO - change number range before saving

hi folks
Does somebody know a possibility in ECC5.0 to change the number range object just before saving the material document in MIGO?
an userexit, BADI, customer function?
Thanks a lot

check this
MB_DOCUMENT_UPDATE
regards
Prabhu

MIGO change header data before saving

Hi all,
I want to update header data (budat) before saving the material document with MIGO.
Has anybody an idea?
I tried with Badi: mb_document_badi or similar user-exit
MB_CF001 but with none of these I can CHANGE header data.
Is it possible?
Thanks a lot!

check this
MB_DOCUMENT_UPDATE
regards
Prabhu

User Exit for CO01/CO02 : How to check production order before saving ?

Hi all,
I try to check production order before saving.
if AFPO-LGORT or RESB-LGORT or some other field is initial, throw an error msg and stop saving process.
I try using badi WORKORDER_UPDATE and user exit PPCO0001 EXIT_SAPLCOBT_001, find out that i can check the data but can't stop the saving process.
Anyone knows some other user exits can do this?
Thanks a lot.

Solved.
A wired solution from
http://abaplog.wordpress.com/2007/03/01/reading-other-programs-data-using-field-symbols-in-abap/

Setting timezone and hwclock result in bad time saved to bios

When I follow the guide https://wiki.archlinux.org/index.php/be … #Time_zone and set following in chrooted Arch environment, I always end up with bad time saved to my pc bios.
ln -s /usr/share/zoneinfo/Europe/Prague /etc/localtime
hwclock --systohc --localtime
Before the symlink, 'date' prints correct local time - it doesn't know my time zone so it prints the correct time (thinking I'm GMT+0). I use Windows so it's stored in BIOS as local time ('hwclock' also correctly prints local time and not UTC).
After the symlink, 'date' shows incorrect time - it shows my time zone but the actual displayed time is +2 hours from my local time (UTC+1 DST/CEST). It makes sense that 2 hours were added to the time because previously the time was printed as GMT+0.
Single ntp sync in Arch or Windows fixes this time shift forever but it should be possible to prevent this, right?

While I do agree with @ewaller that UTC is the "way to go", I think "Linux devs" should put a little more effort into supporting both local time and UTC setups
One reason why I think this is important is for people who need to switch between booting a "locked down" Windows (for work, school, etc, where they have no / limited admin rights) and Arch.
If you don't belong to this group of unfortunate people, you can try forcing Windows to use UTC for the hardware clock, no matter which time zone you're in: https://wiki.archlinux.org/index.php/Ti … in_Windows
EDIT:
Try this link for extra steps on newer Windows versions (see JumperPunk's answer, not the accepted one!): http://superuser.com/questions/494432/f … bios-clock
(perhaps this should be condensed and added to the Wiki?)
Last edited by ackalker (2014-05-12 14:57:24)

Check Batch characteristics before saving

Hi community,
i'm searching for a way to check whether characteristics of a batch were changed.
I found an Badi which is called just before saving the batch.
My target is to create (as usual) a batch Idoc if a specific characteristic is set to a specific value.
Thanks & best regards
Michael

I forgot one thing.
If I create the Idoc within the BADI Implementation,
the batch isn't saved yet.
how can I trigger the idoc creation <i>after</i> the batch is saved ?
any ideas ?????

Tcode FV50: How to find long text in FI Document line item Before Saving.

Hi,
How to find long text in FI Document line item.
During Parking of the FI document through Tcode FV50 i m giving the some text in the long text not in the text field.
I would like to validate the Long Text Before Saving in user exit "U300" under the "Sunstitution" .
Please anybody can be help me out where exactly this long text is going to be stored or in which internal table or memory id.
Please give me the answer as soon as possible .
Note:- Read_Text function module is not useful. Because Read_text useful after saving document.

Hi Amit,
In application area FINANCIAL ACCOUNTING , go for node LINE ITEM. Here create a step & maintain the prerequisite as per your requirement & in the check you can mention the code or you can direct it to a custom program like ZFI_RGGBR000.
Here while maintaining the check you will get structures BKPF & BSEG in which you will get the desired field you are looking for.
Just try to explore in your system how the other validations are maintained.
After you are done with all your code, you have to run the regeneration program RGUGBR00.
Here utmost care should be taken while running regeneration program, you should select all the checkboxes in the selection screen except GENERATE SETS, GEN SUBSTN ROUTNS IN ALL CLNTS & TRACE PROG. GENERATE CALLS .
Hope this make your doubt clear.
Regards
Abhii

Pop up Window before saving remembering the need (forcing) to fill required fields in a form

Hi!
I searched the "old" forum and have very good help from UVSAR but unfortunately I'm not able to access my message sent to that forum anymore.
[I could never thank all the people who answered because I keep receiving "Your submission has triggered the spam filter and will not be accepted.""]
I've have never use Java scripts in my life: I started about three days ago.
1) I'm using Adobe Acrobat Pro X (Windows 7)
2) I've created a form using Microsoft Word and save it as a pdf file.
3) After I created a form using Acrobat Pro X;
3.1.) This form it's not going to be submitted over Internet. It will be send by e-mail to some persons. They will receive it, fill in the form and send it back to me via e-mail. Note: I will save it with extended rights in order to allow to be read with acrobat reader (I'm the only one of the group having Professional edition).
4) In that form I've created some text fields (for now it's just what I need - no radio buttons, dropdown
menus, and so...)
5) Choosed Properties and marked 7 fields as "required";
6) Used a script I found in here: http://forums.adobe.com/thread/784322 (thank you for the authors of the thread)
if (!event.target.valueAsString) {
app.alert("My text My text", 3);
7) This script allows me to remember people to fill that 7 specific fields (when using mouse or tab).
8) So... What I really need? Here are the reasons for my request for help:
8.1.) When people use the Acrobat Reader Save button (not a button I created inside the form) it will pop up an alert message. Users will receive a pop up window telling them they need to fill those fields before saving the form and send it back to me. Can someone share a script, please? Thanks in advance.
8.2.) Is there a way to colorize the fileds that need to be filled? Again I only learned where to insert a java script yestaerday sou I'm not able to write one. I'm sorry for my newbie questions.
8.3.) Last question: In one of the fields there will be an e-mail address. On the end of the form I want to create a button like "Send by e-mail" and When someone press that button the e-mail will be sent to the address that was written in the earlier specific field. How can I do this (link a button to an e-mail address in a specific field)? Can someone help me with a script or ideas? Hope I was clear.
8.1.) UVSAR sent me the following code that works fine untill I save the document for the first time. Affter that he never shows me pop up window again.
var isFilled = true;
for (var i=0;i < this.numFields;i++){
var f = this.getNthFieldName(i);
if (this.getField(f).required && !this.getField(f).valueAsString) isFilled = false;
if (!isFilled) app.alert("You must complete all the required fields");
8.3.) With the help of UVSAR I used:
var mailto = this.getField('emaddr').valueAsString;
if (mailto!='') this.mailForm({ bUI:true, cTo:mailto, cSubject:"This is the subject", cMsg: "This is the body of
the mail." });
else app.alert("Cannot submit form until the email address field is completed");
but gives me an error (Note: I named the filed with e-mail "emaddr")
Once again Thank you so very very much to all the kind people who take their time to share knowledge...
I'm not a native speaker, sorry for some errors
Best regards
AC

Hi Winnie
Unfortunately I have been sick and did not read the message before. I apologize.
I have not received help beyond what is on the page. But when I get I tell you.
I hope you can get answers. If you receive, I ask that you share with me.
thank you very much
best regards
AC
Date: Mon, 27 Feb 2012 09:33:10 -0700
From: [email protected]
To: [email protected]
Subject: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    Re: Pop up Window before saving remembering the need (forcing) to fill required fields in a form
    created by Win_Form in Forms - View the full discussion
Hi ACI wonder if you can share any responses on to your question above?I too have never used a script but, I have the same problems as you in regards to building a form. And wants to have the same 'protection' and message reminders for the end users. Any information, including a script and/or a contact email of experts you can share with me will help tremendously. Thank you so much in advance. Winnie
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4232307#4232307
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4232307#4232307. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Forms by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

User Exits for transaction VF01 before saving the billing document

Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.

J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
These are the Exits Available in the Package
Jus try finding which will suffice ur Requirement.
Regards,
Mithun

BADI before saving BP

Similar Messages

Maybe you are looking for