BADI during the save projects

Hi all,
we are trying to create a small program to get cprojects project details and send it to xrpm customer fields... we need a BADI to get this information when cprojects projects are saved (button save is pressed).
we do not want to use the events / workflows from the TC swo1. Someone has any idea to help me?
tks,
Elias

Hi Elias,
You can use the BADI DPR_ATTRIBUTES for the purpose. You can go through the several interfaces provided in this BADI.
In the interface VERIFY_ATTRIBUTES, you can write your logic under the method 'SAVE'.
Let me know if this helps.
Regards,
Vivek Pandey

Similar Messages

There was an error during the save process

Hi All,
When I try to save the data in a form, I got the following error but data was saved. Remaing forms are saving the data without any error.
There was an error during the save process
I found the log
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 acquired connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 releasing connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:17 PM]: Thread TP-Processor8 released connection com.hyperion.planning.olap.HspEssConnection@11d2066
[Jul 4, 2009 4:24:30 PM]: Rebind at: Sat Jul 04 16:24:30 GMT+03:00 2009
[Jul 4, 2009 4:25:30 PM]: Rebind at: Sat Jul 04 16:25:30 GMT+03:00 2009
[Jul 4, 2009 4:26:30 PM]: Rebind at: Sat Jul 04 16:26:30 GMT+03:00 2009
[Jul 4, 2009 4:27:30 PM]: Rebind at: Sat Jul 04 16:27:30 GMT+03:00 2009
Thanks & regards,
Sravan Kumar.

Hi John,
I customized the standerd Transfer BR according to my requirement. And I am using the customized form.
I tried to change the Action in (Action is smart list) in the form, it is getting saved but with the error There was an error during the save process.
My requirement is Action updated through BR only. But it is not updating. Previously the same BR worked fine.
Is there any relationship between the error and the Action was not updating?
Thanks & Regards,
Sravan Kumar.
Edited by: Kumar1899 on Jul 6, 2009 6:29 AM

Error during the save process with Planning data form

Hi,
When in Planning web-client, I am trying to make changes to data on a data form. The cells are level-0 members (Yellow and writeable in a bottom-up Working version). When I save, it takes a while to process the request, then gives me the following error message: "There was an error during the save process."
The data form is fairly large, could this be causing the problem? I am a able to save data on other forms that correspond to the exact same set of members and dimensions with no problem. What are possible causes of this error? I have tried stopping and starting planning and the entire EPM system. Thank you.

Hi,
I believe you are using V11, I would stop planning, clear out log \Hyperion\logs\services\HyS9Planning-sysout.log, start planning, replicate the error and then going in look if the log has any more detailed information.
Cheers
John
http://john-goodwin.blogspot.com/

Crashes during the save process

Okay, so now that we’ve determined that I DO have the PrE 8.0.1 update/patch… I need to figure out why I am unable to save the video I’ve spent days working on.
As I stated in the last discussion concerning the update, I am in possession of a fairly high-speed computer that should be able to handle this kind of work.
I believe I’ve seen some other folks having problems because of the type of video they are using or importing… What kind of video should I convert to if PrE 8.0.1 doesn’t like what I am using? Oh and I have gotten the message to “Save often because you are running low on system memory” WHICH IS UNBELIEVABLE!!!
So here we go. The video that I am trying to save is approx. 10 minutes in length and is made up of still .jpg photos and videos taken from a Canon SX210 IS. I sure hope that is helpful. I looked at the file types and they are .mov files.
One other thing that may be helpful in identifying the problem… and is quite interesting… after the program crashes during the saving process, I can always go to the save location and find the entire PLAYABLE video saved in the format that I wanted (which was MP4). The only thing is that there are three separate files. 1) Complete clear audio 2) Complete clear video and 3) A third unknown file type that I can’t open. Quite strange. Oh and if you’re wondering if I tried to add open those two (Audio and Video) files in PrE and save them together yes, I did… And it crashed again.
Bob

Bob,
Here is SOMETHING to think about, regarding the Memory/Resources error messages.
This ARTICLE might be helpful at finding clues as to what could be causing the problem.
The links in this ARTICLE will help provide you with some very useful tools for checking programs and Processes, like Process Explorer.
As for the inability to Save, I would try a Save_As, and see if that helps, and does the trick. If not, try Save_As_a_Copy.
When you do Save, do you get any error messages, or does the program just not Save the Project file (.PREL)?
In case it's a system issue, can you tell us about your system in detail? Aspects like the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type(s) and how they are allocated, will be very useful.
If you are working with SD material, converting to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, will be as good as it gets.
Good luck,
Hunt

During the Implementation project....

Hi experts,
can you provide us your thoughts/opinions to the following threads
1.during the implementation after uploading the trail balance into sap system what further immediate action will take as a consultant? please tell us total process?
2.What are the entries generated for GL, Vendor, Customer, Asset balances when upload the trial balance from legacy to sap (in implementation) ?
sure will assign good points
thanks
VK
Edited by: VK on Jan 21, 2008 1:29 PM

Hi VK
Normally there will be a mapping between old data and SAP data, therefore you will need to reconcile that the total balances and do spot checks of certain GL accounts. If you are just entering a balance per GL account this should be easy, however if you are taking line items per GL account you need to be more detailed.
Regarding balances of sub ledgers, these will be updated when you upload the line item details, so open items for Customer, Vendors that kind of thing.
You will need to post to a suspense account, you may use a few so these will need to be reconciled as well.

Bex " the program will now terminate" during the save to favorite

Hello everybody,
Ihave a Bw 7.1 system installed with Frontend 720 and bex 700 shared by Citrix.
I have this error "a critical program error as occurred - the program will now terminate" when I try to save as favorite into my Bw system in BEX .
The problem doesn't appear when I do this activity by my PC without Citrix.
Anybody may help me to understand how to solve this issue?
regards
Lopresti

Dear Jelina,
Have you tried to install the latest frontend patches from Marketplace. If not node, I would suggest you to
please upgrade to latest,
Please goto
-> http://service.sap.com/patches
-> Browse our Download Catalog
-> SAP Frontend Components
-> BI ADDON FOR SAP GUI
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> BI 7.0 ADDON FOR SAP GUI 7.20
-> Win32
-> Apply the latest.
For 3.x frontend:
-> http://service.sap.com/patches
-> Browse our Download Catalog
-> SAP Frontend Components
-> BI ADDON FOR SAP GUI
-> BW 3.5 ADDON FOR SAP GUI 7.20
-> BI 3.5 ADDON FOR SAP GUI 7.20
-> Win32
-> Apply the latest.

How to create a BADI for the sceanrio

Hi abapers,
I have a scenario as follows.
I create a Transaction where in i put the details of the product and quantity for a particular project's site. The amount gets calculated based on the products unit value and its displayed in net value field. Now the user saves the transaction and a number gets generated. If the net value amount is less than 500 then the user can approve , if its greater than 501 and less than 1500 then a mail should be generated to his superior who is able to approve and ifs amount is greater than 1501 then a mail should be generated to the top of hierarchy who should approve it.
Now the real challenge is if the same project card has more than 1 new request and the amount is less than 500 the user should not be able to approve instead it should generate a mail to his hierarchy for approval since the site has already been exceeded its limit of approval. bcoz earlier 500 and current 400 which will make it to greater than 500.similarly for the hiearchy.How do i go about it.
Now i want to create a BADI on the save event of transaction to check the net value amount as well as check for earlier amounts saved for the particular site.
Any help will be appreciated.
Regards,
Navin .

hai navin
r u using ECC 6.0 or 4.7 if 4.7 u can create badi defintiion directly form se18 transaction
and define the interface and its methods , once u define them activate them
and to use in ur code u create an instance of ur badi name
and then use
cl_exithandler=>get_instance method in instance name parameter just pass ur badi name and this will create a badi defintion in ur code, and an oen can implement it
if u r usign ecc6.0 then u can either create new badis usign enhancments or classical badis
for clasical badis just go to menu utilites and create classical badis and follw the sam eprocedure
regards
m.a

User Exit or BADI for the Bank validation in BP transaction

Hi All,
My requirement goes like this, my customer wants to validate the bank keys whether the deletion flag is marked or not and if marked then throw the error message, in BP transaction. But when i was searching for the user exit or a BADI during "save" in BP transaction i was not able to get the appropriate user exit or a badi to do the validation. So can anyone help me finding the user exit or a BADI in the BP transaction
Thanks and Regards,
Praveenkumar T

Hi Praveen,
I don't think there is any Standard FM to validate the bank keys.
You need to make a custom FM for the above requirement and call the FM during the save event of the BP.
Go to Transaction Code-BUS7 and look for event-DSAVC
Under the event DSAVC, assign the custom FM and place the X flag for calling the same.
Hope it clarifies.
Thanks,
Amlan

BAdi after the commit of BP

Hi ,
Is there any BAdi whcih gets trigered after the commit has happend during the save of the BP.
R.

BUS7 is the t-code for the events in BP after updateing the data u will get events to trigger.
Create a new function module and attach at the corresponding event it will trigger after save also.
Please Allot points if it helps.
Regards,
Shiv

CS6 Freezing on Save Project

When I try to save a project in CS6, Premiere displays the Save Project dialogue and freezes completely. The progress bar does not begin to move. If I click cancel, I get the beach ball. The only way to get out is to Force Quit. Also, if I let that it remain in the frozen state for more than a few minutes, it grinds my entire system to a halt with hard drive read/writes and eventually system memory errors (which I've never seen before). I have 8 gigs of RAM and few things running. It also bizarrely knocked out my system sound, which has not returned after a restart. The volume speaker icon is now grayed out (different from muted) with no fix that I can find. The sound thing could be a coincidence, but that seems unlikely.
The project I've been playing with was started in CS5.5. It's a simple project, just a demo reel that I figured would be a good thing to use to test out CS6. It has one AE comp, but nothing crazy. So I opened it in CS6. It converted, and I saved it to a new location. I made a few adjustments and saved it again without a problem. The auto save was also working.
I opened another project from 5.5, also no problems, although I didn't really make any changes.
When I opened the first project again, everything seemed fine until an auto save which froze as described.
I Forced Quit and reopened the project. As soon as I hit save I got the same freeze. I figured some kind of corruption had set into that project file. So I started over with the original CS5.5 project file again. I was able to save it, this time with incremental file names, and make the same changes.
After a quit and relaunch, I opened the project and again couldn't save. That was the case for every one of my incremental saves. I've now gone through this cycle a lot trying to figure it out. The only project I can open and save is the original CS5.5 project file, but if I make any changes and then close the project and come back to it, the freeze on save happens every time.
I'm not particularly concerned about the reel project, but the other project I'm working on is a client piece that I started in 5.5. I'm pretty terrified this will happen to that project as well. I'll soon find out as I need to move forward with it.
I'm psyched about CS6. I like what I've seen briefly, but this is obviously disastrous.
Various error messages have also popped up. Here they are:
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/mightykilt/PremierePro/UIFramework/Make/Mac/../../Src/Workspace .cpp-209]
Premiere Pro has encountered an error.
[/Volumes/BuildDisk/builds/mightykilt/PremierePro/UIFramework/Make/Mac/../../Src/Applicati on.cpp-3118]
Adobe Premiere Pro
Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attempt to save your current project.
Anyone else experiencing this? I'm running Mac OS 10.7.4.

I tried everything to fix the muted audio. This is what worked, You have to run the script every time you restart your computer. Save it to your dock for easy access.
1. Open Utility.
2. Open Applescript Editor.
3. Copy the following and paste it at the top half of the editor (copy everything below with the quotes in place):
do shell script "launchctl stop com.apple.audio.coreaudiod" password "your_password" with administrator privileges
4. Replace "your_password" with your login password. For example if your login password is ILOVEMYSON2011 then it should look like this...
do shell script "launchctl stop com.apple.audio.coreaudiod" password "ILOVEMYSON2011" with administrator privileges
5. Now go to File ---> Save As (in the Applescript Editor on the Menu Bar)
After "Save As" choose a name for the file. I called mine "AudioFix"
Under "File Format" choose "Application."
Save it to your Applications (or wherever you like) and drag it to your dock.
Run it whenever you restart your computer. If your problem is the same as mine, the volume indicator will pop on within a few seconds or up to a half a minute after you run the script.
Good luck!

Incopy crashed during editors save in Word on PC

I am the reporter here, let me know if I have left out any pertinent details...The editor has input all of the corrections into the Incopy file [created from Indesign 5.5 (v7.5.1)] on her PC in Word. During the save the file crashed. When she reopened it the corrections were still visible however, she got the message, "do you want to save back to an earlier version and lose your changes." No matter if we chose, yes, no or cancel, it would not get out of the loop. After many tries she was able to get passed that, and could see that her changes were still there. She packaged the file to send back to the remote designer. The remote designer now cannot see that any changes were made. We've had this problem in the past, where the editors file crashes during save and the changes are lost. The designer has ended up having to input the corrections into the indesign file:( Any help would be greatly appreciated.

You said:
The editor has input all of the corrections into the Incopy file on her PC in Word.
What exactly does that mean?
And all ID and IC users should be patched to 7.5.2.
Bob

CCM BAdi During File Upload

Hi All,
We are looking for a BADI during the file upload for Supplier catalog. The requirement is to modify the file ocntents during upload.
We tried implementing BADI /CCM/CTLG_ENRICHMENT, but seems like this BADI is not called during the upload function at all..
Please help us to fix this..
Thanks in Advance
Karthik

Karthik,
The Upload process is launched in a background task, that is why you have to 'insert a infinite loop' as Bertrand said, in order to enter in debug mode through transaction SM50.
PS: Please be careful, and use filters in your BADI implementation, because it is called also in the mapping and publishing processes.
Regards.
Vadim

Saving 0% 'Could not complete the save as command...'

Hi,
I keep running into this issue on my Mac Pro (Mountain Lion 10.8.4 - 3.2 GHz Quad-Core Intel Xeon 16GB 1066 MHz DDR3 - 2013) in Photoshop CS6 13.0.5.
I have just finished working on a file and saved the .PSD
The only problem is it appears to be stuck at 0%.
The filename in the current document photoshop tab is followed by '-Saving 0%'
If I try and save the file again via 'Save as' I get the following message:
'Could not complete the Save As command because the document is currently being saved in the bavkground. pleae try the operation again after the save has been completed'
Any ideas how I can force this to resume saving or am I about to lose hours of work?
Thanks for your help!

Hi Mike,
I have no other apps running, the only thing using CPU in Activity Monitor is Photoshop at 1%. I currently have 6GB of RAM free and 100+ GB of hard disk space. There is also 100GB free on my scratch SSD for photoshop.
What do you mean by dismount server? I'm not currently connected to any networks and have unplugged all external disks just incase.
How long will it take to 'error out'? It's been over 30 mins now
I didnt switch apps during the save, I wasn't actually doing anything else at all.
As far as I know this isnt a background save because I went to file - save as. Or do you think this has conflicted with a background save?
I also just made a new document and saved that as a .PSD without any problems. The other is still stuck at 0%.
Thanks for your help

"save project as" problem

I'm having this problem on both my mac book pro using FCE 3.5 upgrade as well as on my imac where I just use FCE. I will go to "save project as" and save as Tape 2 for example. I make changes and then I go to "save" but it is grayed out and I only have access to the "save project as" So then I have to save Tape 2 as a copy and end up with numerous copies because that's the only way I can save changes. Is there a setting that I have overlooked, has any one had this issue.
Sputnik

I'm saving to a LaCie external using a usb. Oh shoot is it because I'm using USB?

"Save Project as" -- Beach Ball spinning for a long time????

Hi,
I wanted to make some changes to an Encore project I am working on.
I opened up the Original Project, Deleted the timeline and then replaced it with another encoded timeline.
I then re-linked my chapters and presed File ---- Save Project As ---- renamed it and pressed OK.
I still wanted to keep the original just in case I needed it again.
As soon as I pressed save (for the Save project as), the dialog box came up and on the top of that it says "Save Project as" , but it has been five minutes since I did the "Save as" and I got the Colored Beach Ball spinning in Encore.
Is this supposed to happen. Is it trying to save it? Or did Encore Freeze? How long do I wait until I Force quit?
Thanks
Encore 5.1

For Save As, Encore copies everything in its folder structure, which includes transcodes of assets while in Encore (using AME or encore). It usually shows its progress, however.
I prefer to "save as" before I start making changes. Encore is just too likely to get confused.
But the way you are doing it, inside Encore is the right way, and it should work.
If you see disk activity, I'd keep waiting.
Force quit can result in problems and you don't have a save as backup yet.

BADI during the save projects

Similar Messages

Maybe you are looking for