BADI for Reference Object when IBase is entered in Service Transaction

Is there a BADI to change the Objject Reference Data when the Object ID (Product ID) and IBase ID is entered in a Service Transaction (User presses 'ENTER')
When the user enters the Product ID/ IBase ID in the Service Transaction and hits 'ENTER', I need a BADI to change and manipulate the Reference Object Data (Description, Serial Number) etc before it is output on the screen.
This is from WebUI

Hi,
I have a similar question and after lloking around in internet I still have no clue how to solve it. When creating a service ticket i introduce the Ibase and Component. The Organization has to be determined based on the postal code of the IBASE. Now my problem is that still no GUID and Object ID of the Business Transaction is generated so I can not use for example FM CRM_ORDER_READ.
Also I have problems to find the structure or table where to see the IBASES which are related to Business Transactions if the transaction still not is created.
Any ideas?

Similar Messages

  • Key focus is not visible for all objects when tabbing

    I'm using LabView 5.1.
    The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
    For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
    Is this a bug with LabView or am I doing something wrong ?

    Hi Ben,
    Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
    When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
    Thanks for your time !
    BigBen
    Attachments:
    3buttons.vi ‏22 KB

  • Complete product list in ICSS catalog for Reference Objects:Products

    In my current scenario, I have products that belong to different sales areas and while I create a catalog, I have created different variants for different sales area and assigned the products accordingly.
    The problem is, in the catalog usage (SPRO->CRM->Web Channel->e-service->catalog usage), I can create 1 catalog indicator corresponding to only 1 catalog variant and the same indicator I am giving in the XCM for ICSS catalogs. The problem is, as different variants have different products, the user would never be able to see the complete list of products but can only see the products belonging to 1 variant (whose indicator I have given in the XCM). The expectation is that the user should be able to see all the products (irrespective of the sales area ) in the Reference Object field (ICSS catalog).
    I tried different combinations like-
    1.Creating catalog views and assigning BPs. There is no option though of assigning a view in ICSS catalog
    2.Giving all the indicators in XCM separated by u2018,u2019. I was hoping that the string would be read with a delimiter in the code.
    3.Only giving the catalog name while creating the indicator in SPRO (Variant is not a mandatory option there). This resulted in runtime errors on the UI when I tried to access the catalog
    Can anyone suggest how we might be able to achieve this without any code enhancement?

    Hi,
    Checked the values in the Visual Admin -> Trex Service--> nameserver.address value is filled with the host name and port number
    But no nameserver.backupserverlist is maintained  . If it required should i give the same server details of the above property ei "namserver.add*"
    And also i found that in the Tcode SES_ADMIN , everything is blank and also in the ICSS/B2C/ADMIN portal . the Catalog Cache Statistics is blank, there is no Key or Catalogue Guid is present
    Please suggest me where to check now again .
    Regards
    Vikrant

  • BADI for raising alert when Saving Opportunity

    Hi,
    Can some one help me with identifying the BADI for raising a alert when saving a opportunity, and suggest steps to implement that BADI?
    Regards,
    Chinnu

    Hi Chinnu,
    Implement the method 'CHECK_BEFORE_SAVE' of BADI 'ORDER_SAVE'.
    Transaciton: SE18, enter ORDER_SAVE in the BADI text box and in the menu choose 'Enhancement implementation' and select overview. You will get a pop up and at the bottom you will get a create button. Go ahead.
    Reward if helpful.
    Regards,
    Naveen

  • BAdI for prepopulating objectives (notes) in Appraisals

    Hi,
    1) Can objectives be prepopulated during template creation and then edited once the template is assigned to an appraisee / appraiser
    2) How can objectives be prepopulated when an Appraisal Form is being created? (phap_admin_pa/phap_prepare_pa)
    The requirement is to prepopulate appraisals with different sets of "objectives" based on the employee's job or personnel number. In addition, the user should be allow to make modification to these prepopulated objectives. Is there a way to do this? What's the BAdI that would allow me to achieve this task?
    Thanks,
    Paul

    Hello Paul,
    Prepopulation can be achieved via a fix enhancement (BAdI Def. HRHAP00_ENHANCE_FIX). It will be triggered once when the document goes from status 'In Preparation' into any other status.
    Whether or not they can eb overwritten depends on your normal configuration settings of the reference element.
    Regards and Groetjes,
    Maurice

  • User exit / BADI for updating STO when change in subcontracting PO

    Hi
    The requirement is to update the STO (stock transfer order ) when their any change in subcontracting PO at item level. Is there any exit or BADI available where STO quantity and delivery date will be updated after any change in PO at item level ?
    Thanks
    Manas

    Deepak, Exits for MB1B are
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.

  • User Exit or BADI for Tcode IW31 when saving the Service Order

    Dear ABAPers,
            I would like to add one more line in Service order item when saving the Service order in (IW31).Is there User Exit or BAdI.It is very Urgent Please help me.
    Thanks & Regards,
    Ashok.

    Dear ABAPers,
    These Exits does not meet my requirement.
    These Exits are not called at the time of saving Service Order.
    Thank you for your valuable reply.
    My Requirement is when saving the service Order  i want to add the Line itm at runtime.
    It is very urgent requirement.Please help me.
    Thanks & Regards,
    ashok.

  • The monitor flashes colors when it sits for awhile. When I hit enter it sill stop.

    About 5 days ago the monitor, HP, would start flashing colors, red, green, white, blue,etc. until I pushed enter. The colors appear one at a time and fill the whole screen.
    This happens when there is no activity, only the desk top picture showing.
    Thank you for your help. The monitor is about 6 years old. No problems until last week.

    Is this only happening in Firefox?
    Sounds that a screensaver is kicking in.

  • Can you use objects as "cut outs" for other objects when they are only bitmaps?

    Hi, If this is possible, this would help me a TON.
    I am using Flash CS4 professional
    I will explain the issue. I have made a tree with a tree trunk and on top of the trunk I have made steps. I am making a Flash Game and you have to go up this steps to continue on the level, while being able to collide with the parts of the tree that aren't the steps. To do this, I would have to cut out the parts on the trunk that are the steps. I have already made the steps. It would take a long time to remake them when the trunk is isolated as a selection and delete the part. If there is a way to just put the already made steps on the bit map and then use it as some kind of cookie cutter-like thing, it would be VERY useful for many things. If something like this exists, or if there is any way to do something like this, PLEASE TELL ME !

    For all,
    This page has some Jabber info on linking to MSN amnd other service with the Jabber side of iChat (at the top_
    http://ralphjohns.co.uk/page5.html
    And in the Other Apps section number 11 and 12 point to two apps that can Video only from the Mac to MSN Buddies.
    9:16 PM Tuesday; February 26, 2008

  • I used to have an RSS feed to a blog site which is protected by a username and password rembered by Firefox. I am now asked for those details when trying to enter the blog and despite entering them correctly I am denied entry.

    My old server (5.5. years) was failing me and loosing some random items. I have accessed this blog site for the past three years and during that period the access passwords and user names have been changed several times. Each time I asked Firefox to remember the correct details and I gained entry with no problems. Before I replaced the equipment I was continually refused entry despite entering all the correct information. I received a message telling me that I was either not entering the correct information (which according to the Blog editor I was) or that my server did not know how to connect to the RSS feed.

    Try BottomFeeder for those live feeds.
    * BottomFeeder: http://www.cincomsmalltalk.com/BottomFeeder/

  • To setBorder for JMenu Object when JMenuBar Object's border is also set

    Hi,
    I have created a JMenuBar Object mb and have set its border as
    mb.setBorder(new EmptyBorder(-3,-3,-3,-3)); // have given negative values so that the height of the Menubar decreases since i wanted a narrow menubar.
    Also cretaed a JMenu Object-menu . and now i want to set the border of this Menu Object as simple lineborder.
    menu.setBorder(BorderFactory.createlineborder(Color.black) );
    But the border is not seen fully. Only the left and right vertical border is seen. Top and bottom horizontal border is not seen.
    The moment i make the negative values to positive in EmptyBorder or for that matter i comment that line and do not set EmptyBorder for the Menubar then --the whole border is seen properly.
    So, how do i make the border wholly visible and with a narrow menubar...
    Thanks and regards

    From the JMenuBar API it looks like you could use setMargin(...);

  • BAdI for technical object replication

    Hi,
    I have created a new attribut and settype for PoD (Point of delivery) family with tcodes COMM_ATTRSET and COMM_HIERARCHY.
    I want replicate this new field from SAP CRM to SAP R/3. For this, I have implemented two BAdI : IBSSI_SEND_TO_UPL (for SAP CRM) and IBSSI_RECEIVE_TO_UPL (SAP R/3).
    But, I have tried to put break point into these BAdI and I think that BAdI are never called.
    Perhaps, I don't use good BAdI.
    Have you got any documentations, OSS Notes, or others to help me ?
    Thank you for your help.
    Best regards,
    Rémi

    Hi, Remi
    You have to setup your aleremote user as dialog for debug purpose.
    Denis.

  • Found userexit for LT15, but when run not enter...

    Hi all,
    I found these user exit from here for LT15:
    MWMTO001 and MWMTO002.
    I already placed breakpoint on the code that calling this user exit which is something like call customer-function '002'. Then when i run LT15 and it does not stop at the user exit (means failed to get through this user exit)
    can someone please advice?
    Thanks.
    Best Regards,
    JL

    Hi,
    Goto SMOD and give the enhancement name ..and click on TEST button...
    Then activate the exit..and put the break point in it..
    Then it wil ask for a T.Code..Give the t.Code for which you want to test...
    If the cursor comes to the break point ,,then u can use that...
    Cheers,
    ravi

  • Notification - reference object/reference documents

    hi all,
    When I create a new notification number for a given notification type in our system, there is a subscreen for reference object (such as material number) and reference document (such as production order number)
    Is it possible to have a notification created for more than one material number or more than one production order?
    Does this have to be with ABAP defining new screens?
    Thanks,
    neo

    Hi Neo,
    there's a new feature since EHP 5.
    Check this:
    Assigned Objects - Quality Notifications (QM-QN) - SAP Library
    This is the only way I know to assign more than one object to a notification (without ABAP),
    Chris

  • Reference object in Notification and Order

    Hi ,
    I have a requirement to capture following in the reference Object for notification and  Order
    1. Functional Location
    2. Equipment
    3. Material
    4. Serial Number
    Configuration setting for overview of notification type doesn't have  the option to capture all the above fields.
    I am able to get all fields except Functional Location...
    Please guide me
    Regards
    Anil Kumar

    Anil,
    I have just been looking at this same requirement.
    Unfortunately you can only use the standard options for reference objects which does not allow for your requirement.
    There are no user-exits/BADIs either, you would need to build a new screen and screen-logic which is a system modification.
    The best I could do within the standard system is to include these fields on the Enhancement tab (user-exit IWO10018) or build a bespoke front-end via ABAP or HTML. GUIXT is another option.
    PeteA

Maybe you are looking for