BADI IERI_USERSCR_INSTALL issue

Hi,
I tried to activate BAdI IERI_USERSCR_INSTALL which will be used in Installation of Equipment in PM.
The 'Customer Fields' tab is now visible in tcode IE4N, however, the fields and other items under it are still not present.
May I know the complete step for this activation?
Here are my codes regarding the codes in the methods which start with prefix CUS_:
FOR IF_EX_IERI_USERSCR_INSTALL~CUS_GET_DATA_FROM_SCREEN
method IF_EX_IERI_USERSCR_INSTALL~CUS_GET_DATA_FROM_SCREEN.
MOVE-CORRESPONDING if_ex_ieri_userscr_install~ipw4_com TO es_ipw4_com.
MOVE-CORRESPONDING if_ex_ieri_userscr_install~itob TO
                                                   es_itob.
MOVE-CORRESPONDING if_ex_ieri_userscr_install~resb TO
                                                   es_resb.
MOVE-CORRESPONDING if_ex_ieri_userscr_install~mseg TO
                                                   es_mseg.
endmethod.
FOR IF_EX_IERI_USERSCR_INSTALL~CUS_PUT_DATA_TO_SCREEN
me->if_ex_ieri_userscr_install~ipw4_com = is_ipw4_com.
me->if_ex_ieri_userscr_install~itob     = is_APPEND_CUS_ITOB.
me->if_ex_ieri_userscr_install~resb     = is_APPEND_CUS_resb.
me->if_ex_ieri_userscr_install~mseg     = is_APPEND_CUS_mseg.
Did I put the right code?
I need help for this.
Thanks in advance.
I'll reward poits for helpful answers.
Regards,
Reymar

Hi,
This BAdI is not yet released for use by the customers. It is being used by SAP. So you will not be able to implement this BAdI.
How ever, after/before every badi there will be an enhancement point. Use the Enhancement point and use do what ever you want.
Hope this solves your problem.
Regards,
Raj

Similar Messages

I have a 4s runing 6.1.1 every 5minutes it promp me network lost and i have very bad battery issues lit draine so fast what should i do

I have a 4s runing 6.1.1 every 5minutes it promp me network lost and i have very bad battery issues lit draine so fast what should i do?

What have you figured out? Anything? What you show just shows a pretty quiet system except for firefox having a bunch of tabs open. You've got some page ins and outs so you maybe your'e hitting your HD with swap files more than what you think?
I think something like coconut battery app or something like it will tell you the charge cycles on the battery. How many do you have?
Lastly, are you using any extensions like ad blocker, or click to flash?

Really Bad Playback Issue w/iTunes

I really hope there's someone who can help with this issue! Sorry for the long post but
I wanted to cover as many possible questions right away.
While working on photoshop files or switching between apps or windows, opening
finder windows, basically doing anything outside of itunes seems to cause itunes
to cut out briefly or completely stop OR the audio stops but the song keeps
playing. Other times a song will stop and then only a loud HISS comes from the
speakers.
I have unplugged the 3rd party speakers and played just through the small
speaker in the G5 and the issues remain.
I've done a fairly thorough search for this issue and have found a few postings
(http://tinyurl.com/yajdg6z) (<--windows version) about it but no answers offered except for one that
suggested:
"right click on the song and go to 'Convert ID3 Tags...'then from the drop down
menu pick one, mine works with v1.1
after that the song should start working again."
I converted my entire library to 1.0 and the problem remained. _I do not_ recommend anyone
do this as itunes will duplicate your entire library!
*This is a brand new (month or so) install of 10.5.8 on a 300GB drive w/tons of*
*space in a Dual 2.0 G5 w/8GB's or RAM. itunes 9.0.3 (15)*
This issue was there w/10.4.11 using the OEM boot drive and I'm still having
this issue even having done a new installation on a NEW, bigger freakin drive.
The itunes library resides on an external 500GB firewire drive with 39 GB of
space available, so no airtunes or network to contend with.
I've also deleted my entire song list twice. Once re-importing the original
files and finding the issue remained, then deleted again and imported the backup
of the songs from my backup drive in case the 1st drive the originals reside on
was having issues. I guess it isn't!
When working w/Photoshop, the maximum amount of RAM being used by all processes
is a little over 4GB. Since I have 8GB (that's the max amount of RAM this
machine can hold) AND a completely empty 160GB internal drive for Photoshop
scratch disk space, I should be well within tolerances, but I could be wrong for
unknown reasons. I have allotted CS3 it's maximum amount of RAM which is
3072MB.
I have MenuMeters in the toolbar which gives me a constant readout of processor
and RAM usage, so I'll see it if there is a spike or maxing out of the
processor at any given time. I usually never see that unless I am applying an
effect that requires that much, but the iTunes issue comes when just using a
very small healing brush and I'm cleaning up a scan.
BUT, and this is a big "but", the problem is not isolated to just when I'm using
CS3. CS3 might be running and doing nothing, and I'll be switching windows or
to a different app or just advancing to the next song in iTunes itself and bad
things will happen.
With iTunes being the only app running the problemwas minimized. I tried
opening a lot of finder windows with coverflow andscrolling and the problem
wasn't too bad, occurring ONLY when I did a title change of
a song in iTunes. As soon as Safari was opened and I had multiple windows open,
the problem was back with no CS3 running. Basically if I run any app with itunes,
itunes has problems.
I had left itunes running with some Safari windows open to some CNN pages and wasn't
even at the keyboard and heard itunes cutting in and out.
I do all the necessary utilities (DiskUtility, Disk Warrior, iDefrag, Applejack, and CleanMyMac)
to keep everything up and running so why is this going on? I have also uninstalled Perian just
+in case+ that might help. It didn't.
This is driving me nuts!
Help!
Eric

Yep, unfortunately.
I have 2 500GB FW drives that are clones of each other.
One drive I work from and the other is the backup.
I have deleted the library from itunes and loaded the +clone drives+ copies of the music instead, in case working on images while playing music from the same drive was causing the issue.
Also I switched FW ports the drives are plugged into; switching from the PCI FW card they were plugged into, to the built-in FW port on the G5.
Worst case I will just play music through the wired network on my G4 and plug in the good speakers into the headphone/speaker jack on the G4. I've tested this out using +itunes 6+ which is what is on my G4. I'll update itunes on the G4 eventually if no other suggestions come in. I may try downgrading to itunes 8.2 on the G5 unless I hear otherwise.
You're right this shouldn't happen but seems to be specific to this particular machine as a previous G5 that died on me had no problems. I bought this one used so I can't speak to it's previous history, but it demoed just fine w/final cut and HD movies that were being edited by the previous owner.
I've had this issue since getting this G5. It occurred using the boot drive from my original G5, the boot drive that came with this G5, and the present brand new 300GB boot drive that I'm gonna stay with.
Things that have come to mind as possible culprits have been bad memory and the application switcher if that's still used in Leopard.
Eric

Bad Sound Issues, not Sure what to do here..

It seems my mac is having some terrible sound output problems. Since this my first home mac, it's the first I have to troubleshoot on my own and I'm not quite sure what the problem is. But here's what it's doing:
Using iTunes, the music playback is crap. It sounds very, very full of static and is unbearable to listen to. Though uf I put in a dvd or even watch something from itunes, or a movie through itunes, the sound is great. I've got two little Bose companion speakers, I small monster cable for the rca's and the 1/8" into the headphone jack. The speakers themselves sound perfectly clear when the "audio of my mac's choice" is something which plays back well. This issue I have brought up on the forums before. But it's went a little further, and I thought someone could figure out the problem.
I installed World of Warcraft - a game I like to play for about 2 hours a week - and when the title screen popped up it looked beautiful in 24" i-Mac glory. The sound was loud and the music was crystal clear - then the sound effect of some fire kicked in - and that sound effect was intolerable to the ears. Sounded like bad short-wave radio on it's wost night. Very crackly, full of static. When I get in game, the background music is beautiful, but all spell effects / voice / or action sound is coming out as terrible. So I thought, "Okay, lets unplug the speakers and use the macs internal speakers." Did that and had the same effect, only sounded worse on the internals. All sound effects and EQ's sturned off in itunes.
Sorry for the long interlude, but that's whats going on I can't make heads or tails of why 'some' audio is fine and 'some' is not.
I'm also getting a "phazed sound" as posted by another user on here. Tends to fade left to right, not keep the audio centered, weirds me out, and again makes this beautiful piece of machinery sound like a gameboy. The first one.
Is this a warranty issue?
Bad sound card?
Is there a setting I'm missing here?
If it were a bad card, do I send it to Apple or take it to the Apple Store in Best Buy where I purchased the iMac, to the "I-have-no-idea-what-a-mac-is-or-how-it-works -- here, buy a monster cable for $40 and your problems are solved." guy?
Should I buy something that has digital in sound, fearing having the same results since It's not the speakers? (Probably not, hmm )
Any and all help much appreciated. It's driving me nuts here, music and sound is my life and1/2 the reason this machine was purchased.
Merry Christmas to all of you!
Message was edited by: stevemasten

Does this happen with the build in speakers?

Bad request issue on Azure

we run into it every time after redeployment?
Issue detail:
-The first request to our cloud site (mysite cloudapp net) from any machine will be redirected to login(mysite cloudapp net/Account/Login?ReturnUrl=%2F#/)
,after filling in username/pwd, clicking login
gets “bad request”, “refresh” won’t solve this issue.
-update url back to mysite cloudapp net,
redo login, this time works.
thanks

I haven't solved this issue.
this is the error:
400 The anti-forgery cookie token and form field token do not match.
and I noticed the __RequestVerificationToken are different in request header and form data：
Accept:
text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8
Accept-Encoding:
gzip, deflate
Accept-Language:
en,en-US;q=0.8
Cache-Control:
max-age=0
Connection:
keep-alive
Content-Length:
161
Content-Type:
application/x-www-form-urlencoded
Cookie:
ai_user=0C348769-EFD5-43DB-A089-8B24FAC3E780; .AspNet.ApplicationCookie=mI_Bb1ZbDfJDjjgUSIViJV3ByuTCGSW9ISubRCuISa9lWLT1LBsFRpI6O-gZgG0zq5odVF04lg3J2zoMggN9B8f_jy2JQfAQWGMmDxdQfYlQEk5m1LtKso6iggoYReru_z6NK3gpbcVVS9mKo8ietGnBB92oieUikXtm4I3LEbPXsirkPpOH2rXfJ-PlxXQN1-w-tBpxXZakuFYmMJaOKTvXVjhymtHDSrsBs0LpYbcPCncFX_B1rSvBc8zT_99_wNkzTT1lbTIQqahVVxGr_dxDXUIkcu5X13ng_PZX-G3DikQhsyU66X721F2hhU0zwpkr4ZW8VYaAs6bFzBkMkjlv2CKlZg8zMj4FB1DqDA7dVbHymMqGz9B3Ma1_UBq3o3guv4ZDWcKRPvDWwwgEzidjLWhF9oYHwYZqj-hG9A_d4ITKc47Tde1PpVe2247zWl77hnqR07UyLZM_45J2h3hooQj8ofIsYHXoCF62seLChJd_d2Ash8RE4JJ8ByPyZmCrX0DjjZB105QcoQG04ByZHTY;
__RequestVerificationToken=a-cqe0GcLCXPRQtKr6LPGObUZP9nCC55k1P2wc2_qzWj-nhTKuREYjo2yfo2yhT-F-DV6rm9_s8dBAJDrMHFM27pFXE1; ai_session=C3B73A83-7377-4B92-A522-B73600522C11|2015-02-12T21:01:46.477Z|2015-02-12T21:01:46.957Z
DNT:
1
Host:
26ef0dfa5ecc41149068d2813447fc5d.cloudapp.net
Origin:
http://26ef0dfa5ecc41149068d2813447fc5d.cloudapp.net
Referer:
http://26ef0dfa5ecc41149068d2813447fc5d.cloudapp.net/Account/Login?ReturnUrl=%2F
User-Agent:
Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/40.0.2214.111 Safari/537.36
Query String Parametersview sourceview URL encoded
ReturnUrl:
Form Dataview sourceview URL encoded
__RequestVerificationToken:
0UoJRAXCBNKhYZ6NG9FtorrAPQmUno2ToGntepniXMsmyIswv0CyZz3oUZ3Wmxo1ZzozydyVIusZBYKTBUuTP8Tzh7k1
BTW, our website is asp.net MVC + windows identity.
this is the login page:
@using (Html.BeginForm("Login", "Account", new { ReturnUrl = ViewBag.ReturnUrl }, FormMethod.Post, new { @class = "form-horizontal", role = "form" }))
@Html.AntiForgeryToken()
this is the controller:
[HttpPost]
[AllowAnonymous]
[ValidateAntiForgeryToken]
public async Task<ActionResult> Login(LoginViewModel model, string returnUrl)
if (!ModelState.IsValid)
return View(model);
// This doesn't count login failures towards account lockout
// To enable password failures to trigger account lockout, change to shouldLockout: true
var result = await SignInManager.PasswordSignInAsync(model.Email, model.Password, model.RememberMe, shouldLockout: true);
thanks，

Unknown user name or bad password issue while creating AD accounts

Hi All,
While creating accounts on AD through IdM, I am getting below error. Sometimes I don't see this error while sometimes I do. What could be the actual reason ?
com.waveset.util.WavesetException: Error opening object 'LDAP://cn=ut9778ug,ou=Employee USA,ou=Users,ou=CorpHQ,dc=corpz,dc=utcz,dc=com': ADsOpenObject(): 0X8007052E: , , Logon failure: unknown user name or bad password.
Please help me out.
Thanks,

Hi,
I just faced the same problem while provisionning account on AD through Sun Identity Manager Gateway. (I'm in Oracle Waveset 8 patch 6)
When I test configuration on the configuration page of my AD resource, everything was ok, but when i tried to create / update account on AD, i had the same error. (when i forced a bad password for example, the test configuration was in error, so i know that was ok)
I resolved the problem using IP address in "LDAP Server Name" instead of url or host name. I don't understand because 'ping' on url and test configuration on resource were ok.
I hope it will be usefull for you
Nicolas

Crystal Reports 2008 Fix Pack 3.5 (Bad Fixed Issues Document)

The document available at
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f06b7148-0f52-2e10-e4ad-82ed9e94c350
doesn't list any fixed issues for 3.5. The latest fixed issues listed in that document are for Fix Pack 3.4
Is there a corrected document somewhere?

Hi Ido,
I went through the BOE PDF and these are all I found for just CR 2008 FP 3.5 and not completely sure if they do anything for CR Designer. They may only be affect in BOE.
Here's is the info:
ADAPT01472419
Description:
When a report uses a "For each record" chart, and the report data is sorted on a formula field, after a report refresh the record order in the chart may not match the record order in the report.
The cause of the problem is that the chart is refreshed before the sort order is applied to the report.
To solve the problem, upon a refresh, the formula field in the report is sorted first, before the "For each record" chart is regenerated.
ADAPT01495638
Description:
The label for Summarized Field in a crosstab is always the database field name.
To solve the problem, users can click Options > Database >Tables and Fields, and then select the option to either display the
database field name, description, or both for the Summarized Field Label of a crosstab.
ADAPT01497827
Description:
When exporting or scheduling reports to PDF, an error may occur.
ADAPT01498515
Description:
When exporting a wide-page report to text format, report field headers in the page header may either be missing or wrapped.
ADAPT01503419
Description:
Reports that have linked subreports may run more slowly than usual.
This problem happens when the report contains no data. Despite having no data, Crystal Reports attempts to run the subreport, and this extra processing reduces performance of the report.
Thanks
Don

BADI BADI_SD_BILLING issue

Hi all,
We're trying to implement the BADI BADI_SD_BILLING thought SE19, but appears the error text 'BADI definition BADI_SD_BILLING is only provided for SAP internal use' . Does anybody know how to use this BADI ?
Thanks in advance

Hi,
Thanks for your reply,
For calling a BAPI, i need a userexit which provides the Billing document number and also line items. I tried with the following includes however these are not solving my purpose -
RV60AFZZ
RV61AFZA, ZB
Hence guide me the correct exit which give the information of billing document number and the data related to line items.
Anticipating a positive reply
Best Regards,
Goutham

Macbook shutoff is a bad battery issue - free replacements offered

MacBook and MacBook Pro Battery Update 1.2
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to address these issues.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
* Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
* Battery will not charge when computer is plugged into AC power.
* Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
* Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.

MacBook and MacBook Pro Battery Update 1.2
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to address these issues.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
* Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
* Battery will not charge when computer is plugged into AC power.
* Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
* Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.

BADI Implementation Issue

We are doing a enhancement for opening of Bid Invitations. For this we have created ZTABLE in which I had defined a check field for Bid Invitation document which has to be manually updated. Than to perform this check we need a BADI that will search for this field status.Depending upon the status check our Bid Invitation will open else transaction will not go further.
This check we had planned at the time when buyer checks for vendor submitted bid in system i.e say for bid invitation Document no.810000, we received 2 vendor bid 87211 & 87212.Now when buyer will try to see document 810000 or vendor bid 87211 than the BADI should activate & performs a check in ZTABLE for the document status maintained.So we need to set filter for object type BUS2200 & BUS2202.
We have tried few BADI for which we didn't got any complete result,likewise we implemented "BBP_DOC_CHECK_BADI" where system gave required result only when we are going to change mode of Bid Invitation & that also worked only for BUS2200.
Here are few BADI that we tried-
BBP_DOC_CHECK_BADI
BBP_DOC_CHANGE_BADI
BBP_PROCDOC_CHECK
BBP_PD_BID_LOCK
BBP_PD_BID_UNLOCK
BBP_PD_BID_UPDATE
BBP_bid_det_proctype
BBP_authority_check
Please suggest your opinion as I feel we are missing something or not able to define logic correctly or not picking up correct BADI.

thanks

Server Migration gone bad - several issues - help.

I migrated my Snow Leopard Server to Lion Server and am so frustrated right now. I've been reading posts on the issues below, but have yet to find a solution that works. I could use some help on:
- moving user and groups. I made an LDAP archive of the old server, but don't know how to bring in the users and groups.
- Before doing anything I need the Lion server to be an open directory master, but I keep getting this error "The hostname does not resolve to any configured address. Please ensure your hostname and network configuration." WHAT WOULD BE CORRECT?
- I went into terminal (per message boards) and did the sudo changeip -checkhostname which returned my server's correct internal LAN ip address and current hostname, but it also said "The DNS hostname is not available, please repair DNS and re-run this tool."
- I've tried the new Server.app and Server admin tool and can't seem to make any progress on this.
I need some guidance on what's wrong, what the correct settings should be, and how to move forward. The message boards are good, but many leave out very important information like what things should look like. I did the migration process according to the Lion server migration manual, but even that leaves out pertinent information.
Thanks for any advice.
MacMini Server 10.7.1

Yep, did all that already before the post. I get to a screen where it has Directory Administrator for the name, diradmin for account name, and I put in the password I used to set this machine up and I still get the message about The hostname does not resolve to any configured address. Please ensure your hostname and network configuration."
I don't understand why I should change the host name. It has the same host name as the previous server which is what I want to keep.
Also, in reading the migration manual, my understanding is that the only way to import users and groups while maintining the passwords and such is to do an LDAP archive, which I did. When I try to use server admin on my Lion server and use the archive feature to restore from my LDAP backup, I can't because it will only work for Open Directory masters. I am trying to make my Lion Server an OD master, but can't get anywhere.
The server migration is the worst I've ever seen in setting up a Mac. I just don't know where to go from here. It seems I can't get the OD master to work until I get the hostname resolved but I don't know what that means - resolved to what? It's exactly as I want it - the same host name as my previous server (which is not on the LAN anymore by the way so it can't interfere with this new server).

Bad Audio Issue on first gen MB

Hello everybody!
I have a first gen MB, 2.0ghz, 2 gb ram, custom 160gb Hitachi HDD, 2,5 years of life. Leopard 10.5.3.
Audio issues:
- sometimes (more often when I have USB devices attached) audio is not recognised at boot. No audio icon in menu bar, no output, nothing in preference pane. Restart solves the problem
- Always when Isight is on (i.e.green light on) Audio crackles and skips horrible (i.e. I can't use skype with isight, or photobooth with itunes).
- Audio skips and crackles often when I am just listening to something (itunes) and doing something else (live web browsing, nothing very cpu or hdd consuming).
It happens whatever software I am using to play audio files (even video files with VLC). It seems a very generalised issue. It started around when I updated to 10.5.2, no sign of getting better today with 10.5.3 (should solve something related to usb and audio).
Any hint, help possibilities? (I have tryed to: repair permissions, repair disk, run every single onyx optimisation, defrag, reset SMC, reset NVRAM) nothing works.
Any help would be much much appreciated, thank you very much.

Stop using Onyx. Don't defrag your hard drive. Both steps are unnecessary and can cause more damage than help. You may be able to solve your audio problems with this article:
http://docs.info.apple.com/article.html?artnum=300832

DHCP server bad address issue

Hi,
I'm having an issue with ip address conflict or "bad_address"
I've checked for rogue dhcp server with wireshark. One issue i'm having is that the mac address of the device getting the bad_address issue on the dhcp server is only 8 characters. There is no such device like that on my network. This would be occuring every
other week. Removing it solved the problem, but how do i find the culprit of this problem?
Thanks.

What confuses me, is that it works fine at one site with all of your Windows 7 machines, but not the other. So something up with the DHCP Server? As I asked before, is it multihomed? If RRAS is installe on it, that constitutes multihoming, too.
OTH, Windows 7/Vista's DHCP Lease behavior is a bit different than XP. And keep in mind, we can't discount server side issues, yet, or we can look at this as a combo of the facts. In addition, if anything is on a VLAN, then that's another layer of "something"
else that we need to look at.
Anyway, here are my notes on Windwos 7/Vista DHCP lease behavior differences:
Windows 7 DHCP Lease Behavior is different than Windows XP upon startup
DHCP Client Behavior
http://blogs.technet.com/b/networking/archive/2009/01/29/dhcp-client-behavior.aspx
If the DHCP client obtained a lease from a DHCP server on a previous occasion, and the lease is still valid (not expired) at system startup, the client tries to renew its lease.
If, during the renewal attempt, the client fails to locate any DHCP server, it attempts to ping the default gateway listed in the lease, and proceeds in one of the following ways:
•If the ping is successful, the DHCP client assumes that it is still located on the same network where it obtained its current lease, and continues to use the lease as long as the lease is still valid. By default the client then attempts, in the background,
to renew its lease when 50 percent of its assigned lease time has expired.
•If the ping fails, the DHCP client assumes that it has been moved to a network where a DHCP server is not available. The client then auto-configures its IP address by using the settings on the Alternate Configuration tab. When the client is auto-configured,
it attempts to locate a DHCP server and obtain a lease.
As a workaround, you can force a Windows Vista or Windows 7 DHCP client to keep the old DHCP lease by adding registry key “DontPingGateway” if connectivity fails, see the resolution in the KB article below:
Windows Vista does not keep its DHCP IP address if a DHCP server is not available (works for Windows 7, too):
http://support.microsoft.com/kb/958336
Ace Fekay
MVP, MCT, MCITP Enterprise Administrator, MCTS Windows 2008 & Exchange 2007 & Exchange 2010, Exchange 2010 Enterprise Administrator, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

G60 laptop left without sound and bad screen issues after upgrading to Windows 8

I have a G60-458dx notebook that I just recently upgraded to windows 8.
Since then I have had no audio whatsoever, and anytime I try to wake the computer from sleep or hibernation, the screen won't turn on. To get the screen back I have to do a forced shut-down, then turn it back on.
I've tried uninstalling/reinstalling all of the relevant drivers (e.g. video, audio, chipset) to no avail. If anyone has any info on available generic drivers that would work, or updates from hp, you would make me a very happy man.
Here are the hardware id's for my audio and video.
HDAUDIO\FUNC_01&VEN_14F1&DEV_5051
PCI\VEN_8086&DEV_2A42

Try uninstalling the audio driver and installing this generic IDT audio driver: http://goo.gl/0IMBd
If that does not resolve your audio issue, then more than likely it is a hardware compatibility issue.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Premiere elements 10 bad resoulotion issue.

I have a project for school and am using premiere elements ten to edit, which I need to do since it is my personal favourite for school media projects. And i habe downloaded youtube videos with video downloader from firefox. And when i play them they are good quality on any program except when I am editing on premeire. Any help would be amazing. Thanks.

Downloaded video from YouTube does not make the best source material for Premiere Elements. This is because it has been transcoded and compressed once by the person who posted it to the site, then transcoded and compressed again by YouTube then transcoded and compressed AGAIN by the software you used to download it. Also, a lot depends on the quality and resolution of the footage posted to YouTube and the quality and format of the video your software used to download it. (There are dozens of programs that download video from YouTube and vary wildly in quality.)
You also need to consider how compatible the video format is you downloaded and which settings you used in Premiere Elements when you set up your project.
In short, there are a lot of variables here -- but the short answer is that you're just not going to get good, editable video from YouTube. And even if you do get acceptable footage, it's pretty much impossible for it to be as good as first generation video directly from a camcorder.

BADI IERI_USERSCR_INSTALL issue

Similar Messages

Maybe you are looking for