Baldur's Gate Enhanced Edition missing libjson.so.0

Hi guys, I just installed the beta of BGEE from Steam and I noticed that it won't start. I figured out it was missing libjson.so.0 by running it from the terminal.
Knowing good and well I had json-c and lib32-json-c installed, I was stumped. 
So I turned to the wiki: https://wiki.archlinux.org/index.php/St … leshooting
and as it suggested I ran
ldd baldursgate
and I got:
./baldursgate: /usr/lib32/libcrypto.so.1.0.0: no version information available (required by ./baldursgate)
./baldursgate: /usr/lib32/libssl.so.1.0.0: no version information available (required by ./baldursgate)
./baldursgate: /usr/lib32/libssl.so.1.0.0: no version information available (required by ./baldursgate)
linux-gate.so.1 (0xf77dc000)
libjson.so.0 => not found
libopenal.so.1 => /usr/lib32/libopenal.so.1 (0xf7708000)
libGL.so.1 => /usr/lib32/libGL.so.1 (0xf75f0000)
libpthread.so.0 => /usr/lib32/libpthread.so.0 (0xf75d0000)
librt.so.1 => /usr/lib32/librt.so.1 (0xf75c0000)
libssl.so.1.0.0 => /usr/lib32/libssl.so.1.0.0 (0xf7550000)
libcrypto.so.1.0.0 => /usr/lib32/libcrypto.so.1.0.0 (0xf7358000)
libexpat.so.1 => /usr/lib32/libexpat.so.1 (0xf7328000)
libX11.so.6 => /usr/lib32/libX11.so.6 (0xf71f0000)
libdl.so.2 => /usr/lib32/libdl.so.2 (0xf71e8000)
libstdc++.so.6 => /usr/lib32/libstdc++.so.6 (0xf70f0000)
libm.so.6 => /usr/lib32/libm.so.6 (0xf70a0000)
libgcc_s.so.1 => /usr/lib32/libgcc_s.so.1 (0xf7080000)
libc.so.6 => /usr/lib32/libc.so.6 (0xf6ec8000)
libnvidia-tls.so.340.32 => /usr/lib32/libnvidia-tls.so.340.32 (0xf6ec0000)
libnvidia-glcore.so.340.32 => /usr/lib32/libnvidia-glcore.so.340.32 (0xf4928000)
libXext.so.6 => /usr/lib32/libXext.so.6 (0xf4910000)
/lib/ld-linux.so.2 (0xf77b8000)
libz.so.1 => /usr/lib32/libz.so.1 (0xf48f8000)
libxcb.so.1 => /usr/lib32/libxcb.so.1 (0xf48d0000)
libXau.so.6 => /usr/lib32/libXau.so.6 (0xf48c8000)
libXdmcp.so.6 => /usr/lib32/libXdmcp.so.6 (0xf48c0000)
any help here?
Last edited by redneckdrow (2014-10-07 04:06:43)

Well, that almost worked. Now I get a segfault.
/baldursgate: /usr/lib32/libcrypto.so.1.0.0: no version information available (required by /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/baldursgate)
/home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/baldursgate: /usr/lib32/libssl.so.1.0.0: no version information available (required by /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/baldursgate)
/home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/baldursgate: /usr/lib32/libssl.so.1.0.0: no version information available (required by /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/baldursgate)
INFO: Creating DPWrapper
INFO: scanning:(18) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/override
INFO: scanning:(16) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/scripts
INFO: scanning:(15) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/sounds
INFO: scanning:(13) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/lang/en_US/sounds
INFO: scanning:(11) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/portraits
INFO: scanning:(10) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/characters
INFO: scanning:(9) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/movies
INFO: scanning:(8) /home/khelben/.local/share/Steam/SteamApps/common/Baldur's Gate Enhanced Edition/lang/en_US/movies
INFO: scanning:(6) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/override
INFO: scanning:(5) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/scripts
INFO: scanning:(4) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/sounds
INFO: scanning:(3) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/portraits
INFO: scanning:(2) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/characters
INFO: scanning:(1) /home/khelben/.local/share/Baldur's Gate - Enhanced Edition/movies
INFO: gl.useShaders: 1
gl.has_s3tc: 1
gl.has_pvrtc: 0
gl.has_atc: 0
gl.postprocessing: 1
gl.uploadFormat: 0x80E1
gl.uploadType: 0x8367
Segmentation fault (core dumped)
Now, I have to tell you, I got the same error when I had the idea of symlinking the newer library with the older filename too. I undid that before I tried this.
I'm guessing it's some problem with opengl or my nvidia driver.
Now, how do I continue troubleshooting?
Last edited by redneckdrow (2014-10-07 18:16:29)

Similar Messages

  • [SOLVED] Gemrb, baldur's gate 2 multiplayer

    Hi!
    I was trying to get Baldur's gate 2 working better on my little netbook, because with wine it is really slow.
    Well, i found out gemrb, and after i compiled it from aur, get the right config, now launching "gemrb", makes baldur's gate 2 start (and it is really smooth), i can play sp. All i need is to play mp now, because i'm playing again that game with my brother. With wine I could, but as i said, it ran really slow. (something like 15-20 fps)
    Now, when i click on multiplayer, then connection, it does nothing. Don't know why...
    Hope someone already had this problem and he managed to fix it... or may be someone has any idea what's going on!
    Unfortunately i couldn't find anything on the web about gemrb and multiplayer (may be it is not supported yet?)
    Thank you very much!
    Bye!
    Last edited by nierro (2012-12-04 11:58:01)

    Ok I'll answer myself.
    It seems multiplayer is not yet implemented, so...sorry for make you wasting your time reading this post.
    Bye!

  • MBP 2011 15 late edition:  missing HD space - hd shows usage to be 237 gb, but if adding up amount used by adding up apps, library, systems and users only 65 gb of use shows up?

    MBP 2011 15 late edition:  Missing HD space - HD shows usage to be 237 GB.  Adding up usage by apps, libriary, system and users shows usage to be 67GB. Help

    "Hacked" is not my terminology, and I don't believe it's intended to be derogatory. What you describe is a perfectly legitimate reason to alter Hosts.
    If your Mac still isn't working as expected after uninstalling Intego and Trend Micro, read on. The necessity to have a reliable backup cannot be overstated, since what you describe may be an indication of impending disk failure.
    Back up your Mac if you have not already done so. To learn how to to that read Mac Basics: Time Machine backs up your Mac - Apple Support
    If your Mac is momentarily unresponsive, consider the following.
    Launch the Console app - it is in your Utilities folder. You can find it by selecting Utilities from the Finder's Go menu.
    If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu. Select Show Toolbar if it is not already shown.
    Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's problem.
    To do that click the Clear Display button in the Toolbar. All previously displayed log entries will be disappear.
    Next: Perform whatever actions cause the Mac to exhibit the slow behavior. If the problem is caused by errors logged by the system, the Console window will show them being recorded in system.log.
    One or more of them, along with their time stamps, may reveal the reason for the problem you describe.
    Copy and paste those log entries in a reply. If hundreds of the same repetitive messages appear, please edit them before posting. There should be no need for more than a few log entries.
    Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered.

  • Why won't iBooks on iPhone 3Gs play video on "enhanced edition" book?

    I recently downloaded Stephen King's "11/22/63" Enhanced Edition on iBooks for my iPhone 3Gs. The 13 minute film that comes with the download won't play at all. I'm running iOS 5 and my iBooks is 1.3.2

    Hi, bgrieb.  
    Thank you for visitng Apple Support Communities.  
    This sounds like these shows are in a HD format and are not supported on the iPhone 3gs.  I would recommend downloading the SD version of these shows and then sync these to your device.  
    iTunes: Sync purchased HD videos to iPod or iOS device
    http://support.apple.com/en-us/ts4223
    Cheers, 
    Jason H.  

  • Where do I post a question about Baldur's Gate 2?

    I am having saving issues with Baldur's Gate 2 on my Mac Pro and I posted a question in the Mac Pro section but I'm not sure if that was right. Is there anywhere else to post this issue because Macplay won't return my support emails.

    Did you look over here?
    http://forums.bioware.com/viewforum.html?forum=10
    Joe

  • Enhanced photos missing!

    I imported, enhanced and titled a batch of photos. I attempted to upload them to a website. I brought up my photos from the Finder but ONLY the original, unenhanced, untitled photos exist (besides the thumbnails). In iPhoto, the photos in question are there! What gives?
    Thanks,
    Ryan

    Walabio:
    Welcome to the Apple Discussions. Are you saying if you enhance a photo in iPhoto with the enhance tool the edit does not get saved and the modified photo file, when examined via the Finder and an image view, is the same as the original file?
    I've used that tool on a couple of test shots and then examined both the original and modified files with Photoshop and the modified file definitely shows the enhancement. It's not dramatic but is represented by a general lightening of the image. I think the Adjust panel would do a better job but with a G3 it won't be available to you.
    All I can suggest is the usual maintenance procedures, repair permissions, clean out user caches and run the cron maintenance scripts ( you can use OnyX for the cache and cron scripts).

  • Enhancement RMVKON00 missing EXIT_RMVKON00_003 in 6.0

    In 4.6C, We have a cmod that contains enhancement RMVKON00.  In 6.0 that exit is gone.  I read a note that talk about readding it.  Note number 459903.  But when you try and readd the exit, it won't allow you.  Says.  "As of Release 5.0, the concept of SMOD/CMOD is not longer supported.  For this reason,no new exit modules and groups can be created.  Use Badis instead of exit modules."
    Does anyone know which badi replaces exit EXIT_RMVKON00_003?
    Thanks.

    Peter,
       Can you elaborate on your reply from before.  I've created an implementation and activated the badi, but when I execute MRKO, I don't seem to hit my code.  Am I missing a step?
    I need to change the vendor account in this badi. 
    This is what I find confusing.   You said.
    NOTE that when you switch from consignment settlement in conventional
    invoice verification to Logistics Invoice Verification, all documents
    must have been settled using the customer exit EXIT_RMVKON90_001.
    Thank You,
    Cathy

  • Edits missing in LR 6

    Hi,
    Just realised that all my edits which were in LR 5, are missing in LR 6. All the xmp files are in the folders with the photos. I have just loaded a back up catalog from before the update to to LR 6, but no edits present.
    any ideas?
    thanks,
    Paul

    After the upgrade (about a week ago) LR6  opened and upgraded the catalog. I loaded on photos from card and carried on as normal. Today I loaded on more photos, and while the previews were building checked on some older photos and immediately I could see no edits. Further checks revealed no edits at all from that past 18 months.
    I have just checked that catalog file and the back up done after the upgrade was about 1% of its LR5 size. I have just gone back to a LR5 backup and loaded it into LR6 and its upgraded it and all the edits are all there. Just imported the photos that were post LR6 upgrade and its now building previews etc..
    Good job I keep backups of the catalog. I think problem is solved as such.
    Thanks
    Paul

  • Lr/ACR edits missing when opening dng to Ps

    hello,
    I´m using latest CC versions from Lightroom and Photoshop. Recently I have been having these issues with Photoshop opening file which don´t show basic edits done in Lr or ACR. Ps opens an original file.
    I have also Nik plugins, could that be an explanation for this? On the other hand, I have had those plugins over a year and this missing edits issue came out just couple of days ago. I´m using .dng files and I´m opening file from Lightroom to Ps by "edit in photoshop" command.
    I have reseted Ps and from Lr preferences "reset all warnings" has been done.
    Any thoughts?

    Lightroom 5 uses the equivalent of ACR 8.x and the Latest ACR Plugin available for PS CS5 is version 6.7.
    When you use the "edit in function" from Lightroom you should be getting a warning dialog that offers the choice of "Render using Lightroom" or "open anyway". If you wish all the edits done in Lightroom you need to choose "render using Lightroom" if you choose "open anyway" then ACR 6.x may not be able to apply all the edits done by Lightroom.
    If you do not see the missmatch warning it is because it was turned off in a previous session. From the Lightroom main menu bar go to ""Edit >Preferences >General tab > under Prompts select Reset all warning dialogs""

  • Preference/editing/missing: apply transition

    I'm missing in my preference window /editing the choice under transition as I can see is available in Lynda.com tutorial :
    Transition : Apply transition using : Full Overlap or Available Media ?? Very necessary to keep the lenght in my project. Does anyone can help or guide me ?? Thank's
    My window
    Tutorial window

    Very good to know after trying to figure it out for 45 minutes Thank's for the rapidity of your answer !

  • Token for Appointment edit missing?

    Hi there,
    Im searching for a token to call the new function "Edit" for appointments which was invented with GW 2012, something like ItemEdit. Is this really not implemented or just missing in the documentation?
    Thanks in advance
    Daniel

    I figured it out...zooming in/out using pinch and zoom on the calendar vertically increases/reduces the granularity. I now have meeting titles showing up again for my 30 minute appointments.

  • Enhance Timing missing!

    In the plugin drop down on a given track, the Enhance Timing plugin is missing. It does not show up! Please help! When i check the application support, i see the plugin! why won't it show up in logic express 8?

    basically, the only way that Enhance Timing will work is if it is FIRST plug-in at the top of the plug-in fields.

  • Student Edition missing MAX

    I am using Labview 8.0 Student Edition at home to assist in work duties and have run into a snag.  I was trying to make a Simulated Device, and when I tried to open Measurement and Automation, it wasn't there. I don't know how I missed it before but have been switching between work and home and just didn't notice this before.
    It is referenced in the Student Edition Manual, Cahp. 9, Sec. 8 so I am assuming that it is available.
    Is there a special download that I have to use to enable MAX in the Student edition?
    Thanks in advance 

    MAX gets installed when you install device drivers. If you want to create a simulated device, you need the DAQmx drivers. You can download them at:
    http://joule.ni.com/nidu/cds/view/p/id/276/lang/en
    KostasB
    NI UK

  • Select tool in PDF editing - missing

    Hi,
    I use Adobe Acrobat 8 Profession.
    The "select" tool has disappeared and unable to select object or text to edit.
    With the select tool I could choose any object or text within a PDF document to edit, alter, replace or just remove.
    Andrew

    Don't paste images into pagemaker, ever, always place them.  If your pdf if acrobat 4 compatible you can place the pdf directly, but be prepared for document bloat.
    Acrobat pro allows you to open individual images in Photoshop. You can also open pdfs in photoshop directly, but you have to guess at the resolution.
    Jay

  • Three-Point Edit Missing Frames

    Hello,
    So I am exerpiance a very stange problem, with a very simple operation, and I have no idea why this is happening. I am using a three-point eidt to cover some heavy breaths in a voice over. I have 20 seconds or so of roomtone loaded into my source viewer. The roomtone has an in point a few frames in (to leave room for a transition) and no out point. On my timeline, I create an in and out point, around the audio I want to cover. The gap I am covering is usually only a few frames, a quick inhale, or weird mouth noise. I have done this, many times no problem.
    Today, everytime I overwite to replace the audio on the timeline, the clip is a few frames short of my selection. So, for example, I have a 14 frame selection in my timeline. When I overwrite, PP is only placing 11 frames from my roomtone clip. Again, roomtone is over 20 seconds, loading in the source viewer with only an in point. Timeline as both in and out point, so it's a proper three point edit setup, and the is way more then enough material to cover the selection.
    If I have to roll out every clip I cover, it's going to be a long day, so any help would be apperciated. I am using Premeire Pro CC (Version 7.2.1) on a Mac (OS X 10.9.1). I have uses these exact versions before, and not had this issue.
    Thanks,
    J

    This has been a challengeing little problem for me. Each time I think I have norrowed it down it crops back up. That being said I have come up with a work around, that is working consistently. I thought I  would share it, incase someone else has the same problem.
    The room tone clip I use has video, but normally, don't patch it to the timeline. I noticed that when I did patch the video in, the correct number of frames where placed on the timeline. So I added an extra track above all the others, turned visibility for that track off, and patch the video there. When I was done with that sequence, I simply deleted the extra track.
    Still not as good as an actual fix, but much less time consuming then having to adjust each edit.

Maybe you are looking for