BAM report from multiple systems...

Hi guys, just wanted to know if we can actually get the data from multiple systems and then generate a BAM report on those data??.Is it possible? and if so then can anyone show me the way.
many thanks,
Rajesh.

One option is create external data sources, though Oracle recommends that you only use these for data that does not change very much (since it does not go through the ADC, instead must be continually polled). http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bam_extl_data_sources.htm#CIHJFDAG
Another option is to create a simple BPEL composite that picks up the data from the various systems and sends it to BAM. In general, BAM is more efficient when data is sent to it, not when it has to get the data. (there are also other options including JMS, etc.)

Similar Messages

Report from multiple subject areas

Hi,
I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers.
Is there any other tool from OBIEE suite where I can design it?
Thanks

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

OBIEE report from multiple facts at different levels

Currently we need to develop a report with columns from 3 different facts surrounded with conformed and non conformed dimensions at different levels.
After setting the hierarchial levels and putting the facts into single logical table with different sources OBIEE is generating 2 different queries and does a full outer join.
I would like to know how we can do a left outer join instead of full outer join between the 2 queries based on a common column?
Thanks in advance.

Hi Vinod,
The scenario provided in the link above doesnt match to my issue.
We need to develop a report from multiple fact tables at different levels with conformed & non conformed dimension columns.
I have 7 dimensions D1, D2, D3, D4, D5, D6 and D7 & two fact F1 and F2 tables.
F1 is tied to dimensions D1,D2,D3,D4,d5
F2 is tied to dimensions D3,D4,D5, D6 and D7.
In my report I have columns from D1, D2, D3, D4, D5, D6, D7, F1 and F2.
So OBIEE generates 2 queries with columns from D1,D2,D3,D4,d5 & F1 measure and another query with D3,D4,D5, D6, D7 and F2 measure.
and then does a cross fact join out of box between 2 queries.
But I need to do a left outer join between the 2 queries on a common column instead of cross fact join. I would like to know how we can achive this.
Thanks.

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

Not able to fetch workitem from Multiple system ( version 4.6c ) in POWL Configuration

Hi Experts,
i am configuring SAP POWL in my EHP 6 System and i am able to get work-items from same system but i am not able to get from multiple system which version is 4.6c.below steps are already done.
1.Create RFC Destination ( destination working fine )
2.in SPRO,Cross-Application Components ->Processes and Tools for Enterprise Applications -> Inbox -> Assign Connected Back-End Systems to Inbox
Added Destination for Old system 4.6c
3.Create Exception Entry for that
4.Business function FND_IBO_MULTIBE_1 activated
5.Assigned below roles to respective users
SAP_BC_BMT_WFM_INB_API_END_USR
SAP_BC_BMT_WFM_INB_API_SRV_USR
6.Added respective Task IDs in SPRO -> inbox- >Assign Task IDs to POWL Types
Please help if i any config are missing.
Regards,
Pramod Gupta.

Hi Siddharth Rajora,
Thanks will that,but as you said 4.6c is not supported you have any document where its mention like that.so we can show our client and close this issue please share if you have.thanks in advance.
Regards,
Pramod Gupta.

Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham

Extracting Monitoring reports from J2EE system to SOLMAN

Hi,
I would like to monitor a J2EE system from Solution Manager system and obtain Some related reports from J2EE system to SOLMAN in order to analyze its performance.
please suggest me about the ideas to go about the same.
Your inputs will help me a lot.
Regards,
Kaushik

Hi,
To monitor JAVA system on Solution Manager you need to install Solution Manager Diagnostic or Sitescope or CA Wily Introscope for your java system and after that you can configure your Java monitoring on Solution Manager.
Please refer Note 1107033 for CCMS config for java.
V....

How to create a report from multiple dynamic XMLs

Hi,
I'm trying to build a consolidated report that gets data from multiple XML files and each XML file is different. Although the presentation of the data will be similar, the contents of the XMLs will vary and the number of XMLs to merge will also vary.
What I would like to understand is the following:
* Is it possible to generate a report template based on dynamic columns where the column names, their format and number is different for each business object?
* Is it required to generate an XML with the entire data or can the template read information from different XML files? and if so how it can be done. Please notice that the formatting of each XML may be different.
* Is it possible to use the services to generate the reports directly? Something around these lines was mentioned in one of the sessions but it was also mentioned that it's still WIP.
I've been using the standalone version and although I can get the desired result, I couldn't merge data from multiple XMLs.
Is the new BIP version available, or an enterprise version that I can use?
Thanks in advance,

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

How to generate CCMS report from ECC system

Hi,
I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0. How can i generate CCMS report for my SRM system from ECC system. Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Regards,
Pradeep J

Pradip_jag12 wrote:
> I have implemented CCMS between my SAP ECC system 6.0 and SAP SRM7.0.
>Can any one please tell me the steps to configure CCMS between my ECC (CEN) system and SRM 7.0 ABAP system.
Hi,
Contradicting statements.
However check the link for CCMS Configuration:
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Ideally the CEN system should be a double stack i.e. best if its a solution manager.
Regards,
Srikishan

How to run report from multiple user same time

Hi,
We are using oracle database 11g R2
Oracle Forms & reports : 11.1.2
O.S : Windows & Professional
We have install oracle database, Oracle forms & reports in server. Near about 25 users are accessing that database, forms & reports from server through browser.
I have one problem, when users runs a report there report goes in queue and runs one by one in FIFO manner.
If one user has a report that take long time other users has to wait for that time.
Can it is possible to run reports in multitasking manner, i.e multiple report can be run simultaneously.
http://servername:7001/reports/rwservlet/showjobs?
Using above url am able to see jobs in queue.
Thanks in advance.

Hi Denie,
I am new to it and don't know how to add engines to server.conf , can you please tell me how to add engine to it.
I search server.conf file but i did't found it.
Please help..
Thanks in advance.

Error when opening an existing report from BW system

Hi All,
I have Crystal Reports 2008.
Service Pack 2.
Fix Pack 2.2 (I also tried with fix pack 2.7)
When I try to open a crystal report from a bw system it gives me error message : " An error occured while updating the report's parameter pick list. " ..
Do you have any idea how can I fix this ?
Regards
Ozan

Post your question BEX and B1 and classic SAP data source issues to the Integration Kit forum

Duplicating photos from multiple systems

It appears that Photos doesn't check for duplicates when running on multiple systems. Every time I open it on a new Mac, it duplicates every synced photo from my iPhone so I have 3 copies, each with the same name and identical metadata, all synced in iCloud.

Hi macitect,
To make it easy for you I would export all the photos you want to use and create a new library to import them into. this will be your book library.
When you are done making your book and ordering it you can delete the book library or burn the library to disc in case you want to order another book at a later date.

BI Reporting from one system for other countries

Good Afternoon
I need all the information I can get around doing reporting from one central BI (in SA) to different countries. The systems utilized in these countries are not SAP Systems and it seems that access to the specific systems may not be possible. Information around Project Management, hardware, access, IT Related issues etc will be highly appreciated.
We will be on BI 7.0 in two months. (Currently on 3.0)
Thanks in advance
Cornelius Faurie

Hi Cornelius,
You can connect to any system using SAP BI. It is not necessary to have all ur heterogenous systems to be SAP. You can connect and get data from any non SAP in to ur BI. So that you can use all the features that a tipical Datawarehouse system Provides. But to get data from such number of hetergenous systems of different countries you have to wrok a lot for data extraction. ou can make use of severtal data retrival mechanisms that BI provides.
For example please fo through these links which explains u how to get data from different systems:
[http://help.sap.com/saphelp_nw70/helpdata/EN/e9/6bf2d90e533f409ee56d3f586c325a/content.htm]
Revert back for further queries.
Regards,
Rajkandula

Fatch data in ALV Reports from multiple Tables

Respected Sir,
How to fatch data in ALV Grid report from selected Field and selected Table.
Please Help and My require Field and Table is :
sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
*Please Refere the following code and if u wnt to change at ur own ieda u can change and reply me back.*
*Thnaks In ADVANCE.*
*Please Do need full it.*
*Bhavesh Panchal*
*Baroda*
Also I Make Reports For SO : full coding is.
*& Report Z_NEW1
REPORT Z_NEW1.
TABLES : vbak,    "Sales Document: Header Data
         vbkd,    "Sales Document: Business Data
         likp,    "SD Document: Delivery Header Data
         vbrk,    "Billing Document: Header Data
         konv,    "Conditions (Transaction Data)
         lips,    "SD document: Delivery: Item data
         vbap,    "Sales Document: Item Data
         vbrp,    "Billing Document: Item Data
         kna1,    "General Data in Customer Master
         J_1IEXCHDR.
DATA : i_vbak LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbkd LIKE vbkd OCCURS 10 WITH HEADER LINE.
DATA : it_likp LIKE likp OCCURS 10 WITH HEADER LINE.
DATA : it_vbrk LIKE vbrk OCCURS 10 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 10 WITH HEADER LINE.
DATA : it_lips LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbap LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_kna1 LIKE kna1 OCCURS 10 WITH HEADER LINE.
DATA : it_vbrp1 LIKE vbrp OCCURS 10 WITH HEADER LINE.
DATA : it_temp LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips1 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips2 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_lips3 LIKE lips OCCURS 10 WITH HEADER LINE.
DATA : it_vbak1 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbak2 LIKE vbak OCCURS 10 WITH HEADER LINE.
DATA : it_vbap1 LIKE vbap OCCURS 10 WITH HEADER LINE.
DATA : it_posnv LIKE zdelprt OCCURS 10 WITH HEADER LINE.
DATA : BEGIN OF it_out OCCURS 10,
       sono LIKE vbak-vbeln,
       sodat LIKE vbak-erdat,
       cust LIKE kna1-name1,
       pono LIKE vbkd-bstkd,
       podat LIKE vbkd-bstdk,
       item_no LIKE vbap-posnr,
       item_des LIKE vbap-arktx,
       name LIKE vbak-kunnr,
       pdate LIKE vbak-bstdk,
       acdel LIKE lips-lgmng,
       netweight LIKE likp-ntgew,
       ordval LIKE VBRP-netwr,
   CUST_MAT_NO LIKE VBAP-KDMAT,
       order_qty LIKE vbap-kwmeng,
       desp_qty(5) TYPE p DECIMALS 2, "LIKE lips-lfimg,
       balance(5) TYPE p DECIMALS 2,
       delv_no LIKE likp-vbeln,
       delv_dat LIKE likp-bldat,
       invoice LIKE vbrk-vbeln,
       exnum like J_1IEXCHDR-exnum,
       invoice_dat LIKE vbrk-fkdat,
       invoice_val LIKE konv-kwert,
       END OF it_out.
SELECT-OPTIONS: sono FOR vbak-vbeln.
SELECT-OPTIONS: customer FOR vbak-kunnr.
SELECT-OPTIONS: d_date FOR likp-bldat.
   LOOP AT it_OUT.
   select * into table i_vbak from vbak
   where vbeln IN sono.
   sono = vbak-vbeln.
   append it_out.
   modify it_out.
   endloop.
LOOP AT it_out.
      SELECT single vbeln netwr FROM vbak
          INTO (it_out-pono,it_out-podat)
          WHERE vbeln = it_out-sono.
          "it_out-item_no.
     append it_out.
   ENDLOOP.
    select * into table i_vbak from vbak
    where vbeln IN sono.
    call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
    i_structure_name = 'VBAK'
    I_grid_title     = 'Bhavesh Panchal'
    tables
    t_outtab = i_vbak
    t_outtab = it_out
     exceptions
     others = 1.

Hi Bhavesh Panchal ,
You have to create another internal table with fields which you would like to display in the ALV output.
once you fetch the data from different tables into respective internal tables. loop those internal tables and insert the field values to internal table which you want to display in ALV output.
Create field catalog for the internal table created for ALV output.
Hope it shall be useful.
Regards
Santosh Kumaar.M

APD collecting information form a BEX report from other system

Hi experts!
Just wondering if it is possible to collect information from a BEX query from other system.
And if possible, we wonder if you could kindly assis how to do it.
Thank you very much in advance!!

Hi,
No, we cannot make the query from other system as a source in APD.
The APD allows you to create analysis processes from the data which resides in your BI system.
BR
adlin

BAM report from multiple systems...

Similar Messages

Maybe you are looking for