BAPI_0036_CREATE does not post budget to Funds Management

Hi,
We are using BAPI_0036_CREATE to create budget for a grant and posting to FM. It is creating a document in GM in 'unreleased' status, but not posting to Funds Management.
We are passing FM data in the function module, but for some reason its not posting to FM. The Grant doc type is 'Unreleased' and is in Award phase.
Does anyone know how to create budget document in released status and posting to FM.
Thanks.

Hi Rob,
This budget is related to Grants. First we are creating budget for Grant, and then release it to FM, where the budget will be created in FM. The release part is not working.. hence it is not creating budget in FM.
Thanks.

Similar Messages

Double Check of Budget in Funds Management at the time of Full Settlement

Hello Experts,
We are in porcess of implementing MYERP2005. Currently we are on 4.7 EXT 1.0.
In 4.7 when we do full settlement the system to the fixed assets the system was configured not to check the budget in Funds Management. The budget is checked at the time creation of PO.
However I have issue with MYERP2005, i.e., when we do the full settlement to the fixed assets it checks the budget again. I know there must be some switch in configuration that allows not to check the budget again at the time of settlement to the fixed assets.
Does any body know where I need to change the configuration?
Thanks for looking into this matter.

Hi
If I can understand you correctly, you are talking about the asset under construction which are done in either PS or Internal Order.
Since the budget is checked up when it hits the PS or internal order, hence it is not required to check up again at the time of settlement.
Since settlement is controlling transaction, remove the relevant controlling business transactions under PSM-FM-Former budgeting->Integration->>
Please Assign Points if the solution is found useful.
Regards,
Suraj

FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

Folks,
Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

Folks,
Hello. Thanks a lot for replying.
I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
"Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

Budgeting and Fund Management Solution

We are required to implement a solutioon for Budgeting and Fund management in existing CRM OnDemand used for Sales and Marketing. However CRM Ondemand is not giving us flexibility to embed our processes.
Is anyone aware of any solution being available as 'Custom' solution for Budgeting and Fund Management and that integrated with CRM OnDemand ?
It will be of great help.
Thanks !!

The On Demand High Tech Vertical has a "Funds" object. Contact customer care and they can provision it for you.

Movement type 647 does not currently support serial numbers management

we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
Vicky

Check this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi

Deactivate a depreciation area (Real area but does not post)

Hi Guys
I want to deactivate a depreciation area.
It is a real depreciation area but area does not post in GL.
Is there any risk in deactivating the depreciation area in the asset class ? We do not want to use this area any more '
Thanks

Thanks Anil
But my question is
Should I only have to deactivate the depreciation area in the asset class OAYZ ? In this case new asset won´t see this depreciation area , but old asset still show this depreciation area in AS03. It seems no issue with this approach.
Someone has suggested me also to deactivate it in OABN (but this depreciation area did not post) If I untick ordinary depreciation field in OABN when I go to the asset I have an error message:
"You cannot manage ordinary depreciation in area 60
Message no. AA656
Diagnosis
According to Customizing settings, ordinary depreciation cannot be managed in area 60. The posting being processed changes ordinary depreciation.
Procedure
Check the amount entered and the transaction type."
So, what is the safety procedure just go to OAYZ (I think this is the right way) and unclick the field "deact" ?
"Indicator: Depreciation area is deactivated
Set this indicator if you want the depreciation area to be inactive in this asset class or asset (although it is defined in the chart of depreciation)."
Any other suggestion ?
Regards

Movement type 317 does not currently support serial number management

Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?

Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi

Movement type 124 does not currently support serial number management

Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
John

Unfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible.

Scenario on Procurement Budget planning, Fund management

Dear all,
Can any one put a light on this.
We have a scenario on " Procurement Budget planning " Fund management. We need to plan annual spend plan with respect to procurement.
Could any body suggest what settings need to be carried out with respect to MM module ? what are the responsiblities of MM ?
Does it carried by MM or FI ?
Any related material related to MM?
please suggest your valuable inputs.
Best Regards
Javeed

Hi,
Is your question technical or functional; that is are you asking who should be responsible for the content of the budget planning or how it's technically to do it in SAP?
If the first is correct, then it's for your budget officer to clarify it. There is nothing to be done by MM consultant, as MM is automatically integrated within FM framework for budgetary aspects. It's up to your FM consultant to set up the budget and take of relevant derivation rules.
Regards,
Eli

System does not post after Bios Flash

After using Live Update to flash my Bios to the new version, the computer does not POST. The Bios Flash was successful - it rebooted and started normally. When I tried to restart it the normal way, it will not boot. The fans run when the "power on" button is pressed but nothing more. I cleared the CMOS using the jumpers but the problem was not solved. Can any one help?
Can some good Samaritan give me a step by step method to resolve this problem?

I followed the link you provided and managed to resolved it:
1) Removed one memory stick and floppy;
2) Cleared CMOS and rebooted successfully;
3) Inserted floppy and reverted to the previous BIOS;
4) Inserted the other memory stick and brought system back to full power again.
Thank you very much for your assistance. I am sure MSI is aware of the problem and will take steps to rectify it ASAP

W520 Smart Card reader does not show up in Device Manager

W520 Smart Card reader does not show up in Device Manager.
It was working before and now nothing. Nothing happens when SD card plugges in.
Could my smart card reader stop working or is this a configuration issue?
Any thoughts?
thanks
Ian

Hi Ian,
Welcome to the community, and thanks for the post.
The issue is related with software, to resolve this you need to re-install the card reader driver from the below mentioned web link.
http://support.lenovo.com/en_SG/downloads/default.page?
After that check if the issue get resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Work order to cost center settlement does not post to GL module (FI)

Dear Expert,
I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
Please advice.
Thank you.
KH

Hi Kiran,
The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
Change the cost center from period in the past date and try.
BR, Srinivas Salpala

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

Sometimes Firefox will not open, telling me, it is already running. It does not show in the task manager and the only solution is to reboot.

Firefox is running. I close the program. I try to reopen it. I get an error message: Firefox is already running. It does not show in the task manager, nor anywhere else. I can not close the old version, nor start a new one. I have to reboot.

Did you look in the Processes tab in the Task Manager?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

HP MS218 Not Booting - Does not POST - Cannot reach BIOS

Hello,
I have an MS218 (product number: BR372AA #ABA) that I have been having issues with. It used to work fine (ran on WinXP), but currently will not even boot properly at all. No software or hardware changes were made to cause this problem to begin occurring, it simply just started happening one day when I went to turn the computer back on. The issue that I am currently experiencing is as follows:
- Power stays on, but nothing is ever displayed on the screen
- Does not post, cannot reach BIOS
- Acts almost as if it is resetting itself constantly, the fan in the back will start to spin for a second or two, then stop, then start again, and repeat indefinitely until I unplug the power adapter.
I initially figured it was a hardware issue, likely the motherboard, and began to troubleshoot the problem. As I removed non-vital components, the problem would persist. For instance, it happens regardless of external things (keyboard, mouse, etc.) being plugged in, or regardless of the hard drive or optical drive being plugged in. It still appears to happen in the absense of memory, however, I will instead hear beep codes (likely telling me that I don't have any RAM in). Ultimately, I decided to order a replacement motherboard, which recently arrived. Upon replacing the motherboard, the exact same problems happen, which leads me to believe that the motherboard was somehow not the culprit. I have also tried multiple power adapters to no avail, as well as resetting the CMOS battery without any luck. I'm really at a loss for what to do from here, and am currently sitting on hold with HP tech support.
Any advice is welcome. Thanks in advance for your time and assistance.

Hello Jaycera,
There are two more components that we haven't replaced or look at and I would approach them in the order listed.
1. Power supply
2. Processor
It sounds like it's a power issue the computer is getting enough power to start booting up and then losing it. Thus anytime I hear a power issue the first thing I think of is a power supply issue.
The other thing is it could be the processor. The computer starts booting, makes a call to the processor, fails, boots down, starts booting up, makes a call to the processor and here we are in a vicious cycle.
It could just be the processor needing reseated. Take it out, put it back in and make sure it's in properly and no pins are bent, or the processor could be bad.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

BAPI_0036_CREATE does not post budget to Funds Management

Similar Messages

Maybe you are looking for