BAPI_BUS2002_ACT_CHANGE_MULTI does not work when i will call it multiple.

Sir, i am using following code. and execute in same order with one network code.  its work fine and update activity attributes.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
CALL FUNCTION BAPI_TRANSACTION_COMMIT
but when i want to use "BAPI_BUS2002_ACT_CHANGE_MULTI'" bapi multiple time with different network id, its not update any single activity. please help me in the reqard.
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_BUS2002_ACT_CHANGE_MULTI'
CALL FUNCTION 'BAPI_PS_PRECOMMIT'
CALL FUNCTION BAPI_TRANSACTION_COMMIT
Edited by: Haroon.Rashid on Jun 3, 2010 7:57 AM

its working fine in ABAP code, but right now i will call these BAPI from Dot net and these give me following error.
1) Individual check for change to object Activity 903579 0010 successful
1) Individual check for change to object Activity 903580 0010 successful
1) Object Activity 903580 could not be changed
1) No update flags or extensions were set for Activity 903580
2) Error in individual BAPIs or precommit: posting not possible

Similar Messages

  • Iphone 4 the mike does not work when making a call.  it does work with speaker phone and face time

    Just activated new Iphone 4 and the mike does not work when making a call.  it does work with speaker phone and face time. Any known fixes?

    My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often.  I called her iphone 4 at home from where I work 20 miles away on my iphone 5.  With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries.  This is a 10% sucess rate!!  I also could listen in real time from the wired work phone and the wired home phone.  She turned off 3G mode and it went to "O" mode at  the top left of the screen after the ATT.  In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time.  I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network.  If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring.  If the ring tone does not change after the 4th ring you get voice mail.  If the calling party does not leave a voice message there is never a missed call displayed on the iphone.  If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication. 
    This appears to be related to the time of day and the ATT tower that the receiving caller is using.  Tried other towers and it works in 3G mode 10 times out of 10 tries.  Apple replaced the first iphone 4 with a new phone, no improvement.  ATT replaced the SIM card and no improvement.  ATT so far is clue less.  This has been going on every since we got the new iphones which is 4 months.  The ATT web site also describes this same problem from several years ago.  Has anyone got better information?
    Thanks

  • Siri does not work when used for calling a contact function

    Siri does not work when used for calling a contact function

    Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
    If it continues try to restore it.

  • TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that  o2 account (offline) my mac I have no problem with my iPhone  or mac laptop. any suggestions please.

    Sorry for the delay...
    I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
    I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
    Thanks for the help, anyway!!

  • IPhone speaker does not work when switching call to hands free option

    having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?

    Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working.  I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • My App Store does not work when trying to update applications

    My Apo store does not work when I try to update applications that need to be updated

    There are a number of other threads from people reporting a problem with a blank Updates tab in the App Store app - it looks like there is a problem at Apple's end which they need to fix.
    Some posts are suggesting that you if you go into the Purchased tab in the App Store app you might be able to update the apps from there, though you will need to scroll through the list to find those with updates and individually update them.

  • After installing acrobat my Microsoft office package does not work properly, word will not open and in my email i can't select anything with the mouse

    After installing acrobat my Microsoft office package does not work properly, word will not open and when I want to write an email in my outlook email i can't select anything with the mouse. so copy past en delete are not an option.@

    Are you using any MS Office third party Add-ins? Test:  Remove third party Add-ins other than PDFMaker.  Test to see if the MS Office apps run afterward.
    Did you attempt to repair MS Office?  Test:  Go to Add/Remove Control Panel run Repair.
    Finally, have you tried testing to see if it's PDFMaker?  Test: Use the Add/Remove Control Panel to modify the Acrobat installation to remove PDFMaker.  See if MS Office applications launch and behave correctly?

  • Fault policy does not work when throwing remoteFault in bpel

    Hi
    I have a BPEL-proces in which I throw a remoteFault.
    In the fault-policy there is a condition for this fault
    <faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
    name="bpelx:remoteFault">
    <condition>
    <action ref="ora-java"/>
    </condition>
    </faultName>
    But the fault-policy does not work if I throw this remoteFault in de bpel. But when I invoke another service (which is shutdown), then I get a remoteFault and for this remoteFault the fault-policy works well.
    Any idea why the fault-policy does not work when I throw the remoteFault?
    Regards

    BPEL fault works only on invocation failures.
    Fault management will work based on the remote fault from the remote service, you cannot throw remote fault from bpel and capture that in fault management and process.
    The following are the actions that we can take on faults.
    1. Human Intervention
    2. Rethrow [rethrowFault]
    3. Termination [abort]
    4. Replay Fault [replayScope]
    5. Custom Java Action [javaAction]
    6. Retry [retry]
    Hope this helps !!!
    Thanks,
    Vijay

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • The T61 internal mic does not work when docked

    The internal mic does not work when docked. However works fine when undocked.
    Does anyone know how to fix this?

    I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
    First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.  
    I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
    Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype. 

  • HT201413 Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to your computer to the iTunes program update requests and then gives me an error No. 21

    Device does not work when I connect it to my computer to the iTunes program update requests and then gives me an error No. 21

  • The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    The search function in the itunes store does not work.  It will accept a request and suggest searches but then it locks up and will not search.  Clicking on the magnifying glass or a suggested search does nothing.  Re-installing itunes has not helped.

    everything you stated here is exactly what i have done and have got nowhere. i have windows 7 64 bit on a hp 8 g of ram desktop. im also looking for help

  • My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

    Get it fixed then, make an appointment with the Apple genius bar.

  • Breadcrumb in BSP is not working when application is called inside Portal.

    Dear All,
                We have implemented SAP Learning Solution by integrating it with SAP EP 7.0.
    We called the BSP Application HCM_LEARNING inside portal  using BSP iView template.
    The problem we are facing is, the breadcrumbs in the BSP application "HCM_LEARNING"  is working fine when it is called as a standalone application. But the same is not working when it is called inside portal framework page.
    Enterprise Portal breadcrumbs are working fine.
    How could we resolve this.?
    Regards,
    Eben Joyson.

    this is the radio button
    <af:selectOneRadio value="#{bindings.Gender1.inputValue}"
                                                     label="#{bindings.Gender1.label}"
                                                     required="#{bindings.Gender1.hints.mandatory}"
                                                     shortDesc="#{bindings.Gender1.hints.tooltip}"
                                                     id="sor5">
                <f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
              </af:selectOneRadio>
    i use this sample
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html

Maybe you are looking for