BAPI for re-read of standard network CN22
Hi,
Anyone knows any BAPIs available to reread standard network?
Regards,
ET
Check if any of the below Function Modules may help:
1. 2002_NETWORK_CREATE
2. CN2002_NETWORK_CREATE
3. NETWORK_CREATE
4. NETWORK_ENJOY_CREATE
5. CNPB_M_NETWORK_CREATE
6. CO2H_NETWORK_CREATE
7. CO2H_NETWORK_CREATE_STRU
8. CO2H_NETWORK_CREATE_WITH_REFE
9. WB2_CREATE_ASSOCIATION_NETWORK
10. WB2_CREATE_FLOW_NETWORK
Hope it helps.
Similar Messages
-
BAPI for meter reading order (MRO) Reversal
Hi Experts,
Please let me know if there is any FM or BAPI for meter reading order reversal, Similar to EL37
Regards
BikasHello Bikas,
Though this is an old post, thought of replying for the sake of googlers who might look for a solution for your query...the below code works!
*---Begin Of Code
TYPES : BEGIN OF ty_meter_orders_data,
anlage TYPE eablg-anlage,
adatsoll TYPE eablg-adatsoll,
ablesgr TYPE eablg-ablesgr,
END OF ty_meter_orders_data.
DATA : lt_meter_orders_data TYPE STANDARD TABLE OF ty_meter_orders_data,
xy_ieabl_delete TYPE eabl_tab,
xy_ieablg_delete TYPE eablg_tab,
xy_ietrg_delete TYPE etrg_tab,
x_anlage type anlage,
x_retro_upd_date type adatsoll,
y_return type char1.
DATA : y_obj TYPE isu17_meterread.
*--Get the needed data for reversal
SELECT a~anlage
a~adatsoll
a~ablesgr
FROM eablg AS a
INNER JOIN eabl AS b ON a~ablbelnr = b~ablbelnr
INTO TABLE lt_meter_orders_data
WHERE a~anlage = x_anlage AND
a~adatsoll >= x_retro_upd_date AND
b~ablstat = '0'. "MR Order
IF sy-subrc = 0.
SORT lt_meter_orders_data BY anlage ablesgr adatsoll.
DELETE ADJACENT DUPLICATES FROM lt_meter_orders_data COMPARING anlage ablesgr adatsoll.
SORT lt_meter_orders_data BY adatsoll DESCENDING.
LOOP AT lt_meter_orders_data ASSIGNING FIELD-SYMBOL(<fs_meter_orders_data>).
CALL FUNCTION 'ISU_O_METERREAD_OPEN'
EXPORTING
x_anlage = <fs_meter_orders_data>-anlage
x_adatsoll = <fs_meter_orders_data>-adatsoll
x_ablesgr = <fs_meter_orders_data>-ablesgr
x_select2 = '5'
x_wmode = '6'
IMPORTING
y_obj = y_obj
EXCEPTIONS
not_found = 1
foreign_lock = 2
internal_error = 3
input_error = 4
existing = 5
number_error = 6
general_fault = 7
system_error = 8
manual_abort = 9
gasdat_not_found = 10
no_mrrel_registers = 11
internal_warning = 12
not_authorized = 13
not_qualified = 14
anpstorno_not_allowed = 15
already_billed = 16
dev_already_prep = 17
OTHERS = 18.
IF sy-subrc = 0.
CALL FUNCTION 'ISU_O_METERREAD_ACTION'
EXPORTING
x_okcode = 'PSAV'
CHANGING
xy_obj = y_obj
EXCEPTIONS
cancelled = 1
failed = 2
action_not_supported = 3
system_error = 4
input_error = 5
not_customized = 6
OTHERS = 7.
IF sy-subrc = 0.
CALL FUNCTION 'ISU_O_METERREAD_ACTION'
EXPORTING
x_okcode = 'SAVE'
TABLES
yt_eabl_delete = xy_ieabl_delete[]
yt_eablg_delete = xy_ieablg_delete[]
yt_etrg_delete = xy_ietrg_delete[]
CHANGING
xy_obj = y_obj
EXCEPTIONS
cancelled = 1
failed = 2
action_not_supported = 3
system_error = 4
input_error = 5
not_customized = 6
OTHERS = 7.
IF sy-subrc = 0.
COMMIT WORK.
ENDIF.
ENDIF.
CALL FUNCTION 'ISU_O_METERREAD_CLOSE'
CHANGING
xy_obj = y_obj.
* Implement suitable error handling here
ELSE.
y_return = 'E'.
ENDIF.
ENDLOOP.
IF y_return <> 'E'.
y_return = 'S'.
ENDIF.
ELSE
* RAISE no_mtr_read_ordrs_found.
ENDIF.
*---End of Code
Thanks.
Mohammed. -
Function Module/BAPI for Meter Reading Entry(EL28)
Hi Experts,
Can anyone tell me about BAPI/Function Module for EL28(Meter Reading Entry).Standard FM is preferable.
Thanks & Regards,
Radharaman Haldar
Moderator note - Thread locked, no research.
Edited by: William Eastman on Mar 8, 2011 5:17 PMISU_VALIDATION_DEPENDENT & ISU_DETERMINE_VALIDATION.
The above two function module is used for the validation of Plausible or Implausible meter reading. -
BAPI for displaying data of standard tables
Dear All,
Could anybody tell me the name for BAPI to display data in standard tables
i.e. import : table name and
fields
Output : table entries ( data in those tables )
thanks.........why dont u write ur own code for tht
in the selection screen take the name of table now use a field symbol to create an internal table of type tht table now use select query to get the data -
Error in standard network creation using BAPI
hi,
I need to create standard network using BAPI.
I am trying with BAPI_BUS2002_CREATE. As per the documentation, I need to call function BAPI_PS_INITIALIZATION. But, I am not able to get the required output since its giving me error.
Does anybody has used the same BAPI for standard network creation.
Regards,
UjjwalaHI,
How did u create standard network? If u used bapi, which bapi did u use??? -
Standard BAPI for PO and PREQ Rejection
Hi All,
Do we have a standard BAPI for PO Rejection and Purchase Requisition Rejection?
Regards,
MurtuzaThe standard process is that you should configure the sales order as Third party sales order (or Inter company SO-PO process whatever is the requirement here) then Purchase requisition will be created automatically when the sales order is saved. You can then create PO with reference to the Pur.req. The item category TAS is configured in standard SAP for Third party / inter company processing requiring SO - PO process.
A PO in a third party/inter company SO-PO process is linked to SO through Purchase requisition and the linkage happens at item level because a single sales order can have both PO related items and items that are directly delivered and billed.
You can refer these links
how to configure third party order ?
http://sapsdforum.com/2007/10/23/third-party-order-processing/ -
Standard BAPI for editing Contract in R/3
I am new to SAP.I want to implement a BAPI to edit the contract details.Is there any Standard BAPI for doing this????
Regards
AchinHi
Refer
BAPI_CONTRACT_CHANGE
Regards
N Ganesh
assign points if useful*** -
Standard BAPI for creating groups in SAP
Hi,
I have a requirement to create user groups in SAP executing a BAPI from an external application.
As an input parameter the group name and group description will be passed to the BAPI.
I am unable to find the standard BAPI for the same. Can anyone help me with the BAPI name for creting groups in SAP?
Thanks in advance,
AniHi,
I think you can search for it or you can create a thread at ABAP section. -
Special Standard printer only for acrobat reader, is this possible? Registry Hack
In my networking earea are a lot of printers also a big toshiba copying mashine.
While printing a pdf file to it with an PCL6 printer driver it takes a lot of time to print this.
When i take a Postscript driver it runs faster ...
so when my users will print pdf's it is difficult to explain them how to print ... an own standard printer for acrobat reader would solve this problem.
Does anyone have a solution? is there some registry hack?
regards 2CV6In Windows (don't know if this is the case on Mac) in a corporate environment where you are connected to printers via verbose network paths, you can't see the entire path. The "printer name" gets truncated. Since the name of the printer is at the right end of the path, you can't see which printer is which.
It would be handy if they had a function that allowed you to scroll to the right of the printer list and/or throw up a tool tip that gives the entire path. I'm surprised this hasn't been flagged as a pretty significant issue. -
Are there any standard Idocs or Bapis for posting the data into transaction
Hi,
Are there any standard Idocs or Bapis for posting the data into transactions ME42N and IK11?
Thank You.Thank you.
Any idea of the other one? -
Hi,
i'am searching a bapi to lock a network plan.
Is one BAPI for this mission available?
Thanx
TonyHi,
I think use these BAPI for network lock.
BAPI_NETWORK_MAINTAIN
and also i am giving some bapi list regarding that one.
BAPI_NETWORK_GETLIST
BAPI_NETWORK_GETDETAIL
BAPI_NETWORK_EXISTENCECHECK
BAPI_NETWORK_CONF_ADD
BAPI_NETWORK_CONF_CANCEL
If it is usefu, Please reward me the points.
Thanq,
Satish. -
BAPI for read FI documents in material document
Hi all,
with transaction ME23N i can display Material Document and in the tab 'Doc. info' i can display FI Documents if i click on the button. I'm looking for a BAPI to read this FI documents from the material document.
Thanks for your help.
CheersIf you mean that you need to know what BAPI's a particular transaction uses, which I can only assume that's what you mean, then you should access the code behind the transaction and search for 'CALL'. That normally is the standard method that think that most people use.
Suppose you want to find the bapi for creating a sales order, you usually use transaction VA01 for this.
1. Find out the package of the transaction.
Start Va01 go to system --> status.
Double click on transaction
Package is VA
Open this package in SE80
Open business engineering-->Business object types
Find the BO which sounds the most appropriate
I would suggest BUS2032 Sales Order
Double click.
Open methods.
Find the released method with from data or something similar in the name
, Createfromdat2
Position the cursor in it and click the program button
Scroll down to find the bapi used in this method
With this way you can also find out programs and FM's
2. Start va01 go to system-->status
Double click transaction VA01
Double click on package
Read the application component. (this is SD-SLS Sales)
Then open the transaction BAPI
Sales and distribution>Sales>sales order
createfromdat2 -
Very urgent::: Standard BAPI for creating quotation in vendor side
hi all
i need a standard bapi for creating Quotation in the vendor side
i found 2 bapi's :
bapi_quotation_createfromdata,
bapi_salesorder_createfromdat1.
but these are related to customer side itseems...
i want standard bapi's for vendor side Quotation creation....
points will be awarded for useful answer...hi all
i need a standard bapi for creating Quotation in the vendor side
i found 2 bapi's :
bapi_quotation_createfromdata,
bapi_salesorder_createfromdat1.
but these are related to customer side itseems...
i want standard bapi's for vendor side Quotation creation....
points will be awarded for useful answer... -
BAPI for Creation of the Project in ECC using Standard Templates
Hi,
I want BAPI for Creation of the Project in ECC using project id and project standard template ID
and BAPI for Updating of project and WBS element using project id and WBS element IDOne idea is to write a wrapper FM that is remote enabled and internally call BBP_PD_CTR_CREATE for your own use.
-
Need standard BAPI for Block/Unblock Customer
Hi All,
is there Standard BAPI for Customer Block/Unblock .
Thanks in Advance.Hi,
below is a useful link which gives a list of bapi's,
http://www.mysaphelp.com/blog/?p=122
look out for V02D Customer Master: Read/Block
might be of some Help...
Thanks,
Naren
Maybe you are looking for
-
Connecting to a remote database
I am trying to connect CS3 to a remote mysql using the DW UI. The databases are all set up and I can connect via php, there are talbes and there is data alreading inserted. In the first case I am getting a Mysql Error 2003, in the second case I am ge
-
What software should I leed to open attachments with format pps and wmv Thanks Jorge 07
I Pad
-
Finishing from a digital source
a friend of mine shot some footage using a still camera in photo-jpg. i'm on a pokey powerpc, so i transcoded the footage given to me to dv so i could work in real time(color correction, etc). i've got the cut, so now i have to finish this thing with
-
Using iPhoto for a specific PP task - will it cause any issues?
Since I've started shooting in RAW, I haven't really used iPhoto that much. My current process is to import using Bridge, open images in Adobe Camera Raw to edit and crop, and then open in PS Elements 6 to do final editing. However I don't like the c
-
Automatically layout large # of images, and rollovers?
Hello: I have about 400 images that I'd like to put in a simple grid layout, and I'm wondering if there's any way to do it that doesn't involve typing in all 400 filenames into the HTML. All the files are located in a single directory and are uniform