BAPI for replicate PO in Ext. Classic Scenario

Hello All,
What BAPI may i use to replicate PO in backend system?
please give me some hints
thanks
Paulica

Hi,
Try to BBP_PO_CREATE and BBP_PO_SAVE
Check this help too.
http://help.sap.com/saphelp_srm40/helpdata/en/e9/d0fc3729b5db48e10000009b38f842/content.htm
Regards,
Marcin Gajewski

Similar Messages

  • SRM MM-SUS for Direct Material ( i.e. Ext Classic Scenario)

    Hi Friends,
    We are planning to have the Classic Scenario in SRM 7.0  with  SUS. So it will be SUS-MM scenarion and it supports only for Classic Scenario,
    But when there is a case of Direct Materials [ Manual or through PDP ( Ext Req) ], it is SAP by defaullt setting that , system determine Extended Classic Scenario.
    Now , if SUS-MM supports only to Classic scenario ,then we can collaborate the Orders of Direct Material genereted through Ext Classic Scenario in SUS ?
    Confused over these contrast . Can any one suggest that how to get both one in SUS-MM  ?
    Thank you in advance.

    Hi Alex,
    Thanks for reply.
    It seems here is some confusion. PDP of Dircet Material is standard SRM secarion where we can soure the requieremnets generted in various SAP Module like PS, PM , SD, APO..etc. So We just hav eintenstion to source the requiermnet in Sourcing cockpit to create the PO .
    Okay. For time being , forget the PDP of Direct Material.
    Just take the Direct  Material ( For which we mention inventory or we procure for stock) only.
    By SAP standard / defualt setting  , for Direct  Material , local PO is generted ,althoug we have mentioned Classic Senrion setting for the same . And it is Extended Classic Scenarion. Right!
    At another side , it is SAP standrad that SUS-MM senarion support for only CLASSIC SCENARIO.
    Then , my conern is  how we can send these Local orders for dircet Material to Supplier via SUS ? Wether it is not possible ?

  • How to know which BAPi is being used for creation of PO in classic scenario

    Hello Experts,
    We are in SRM 7.0 classic scenario.
    How can we know which BAPI is being used in the calssic scenario i.e. How can we know if we are usind BAPI_PO_CREATE or BAPI_PO_CREATE1 for creation of PO?
    Any pointers will be highly appreciated.
    Thank you in advance,
    Thanks & Regards,
    RKS

    Hi RKS
    yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
    /people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
    Good work Summer wang !!
    Muthu

  • R/3 Backend PO in SRM for Confirmation in Ext. classic scenario

    Hi,
    We are on SRM 4.0, Extended classic scenario
    User created STO(Stock transport order) in backedn R/3(Not in SRM) and is visible in "Confirmation /GR services" in SRM.
    But when user tries to do confirm it the items are not available and confirmation is not possible in SRM.
    Is there anything missing in the system ? Please suggest
    Best regards,
    Sambit

    it should be updated by running standard progarams which updated the status of the corresponding documents in R/3

  • P-card  process available for SRM 5.0 extended classic scenario

    Hello,
    I didn't find the information, so I'm posting this message.
    Is  the p-card functionality available for the extended classic scenario in SRM 5.0 ?

    Hi,
    Use of Procurement Cards are supported in Extended calssic scenario from SRM 2007 ..onwards
    HTH
    Rajesh

  • POs are not available in Backend Ext Classic Scenario

    Hi All,
    Working with SRM 5 and Backend 4.6. in Extended Classic scenario.
    For one plant the PO created in the SRM does not get replicated to the Backend whereas for other
    Plants it happens.
    Any body faced this before,pl give clues.
    Thanks & Regards,
    Nagarajan

    Hi
    (1)Is that PO in error in transfer?
    (2)Hope you have defined local flag when your defined srm system.
    (3) What about communication rfc users profile in both system.
    (4) Hope RFC definition and logical system name are same/
    BR
    Muthu

  • Sharing attachment documents (e.g. for P.O.) in extended classic scenario

    Dear SAP SRM gurus
    in the SAP SRM extended classic scenarios (rel. 7.0) attachments of Purchase Order can be viewed also in the backend SAP ECC 6.0  as per SAP Notes n. 1582690 and 1057932 . But I am not sure if attachments are phiysically transmitted from SAP SRM to ECC or only document url is passed even though, as per SAP note n.1357551 it seems that only url is passed.
    My customer wants to know if there is the possibility of not replicating them.
    Any suggestions will be appreciated.
    Many thanks in advance
    Best regards
    Gianluigi Brenna
    Edited by: GIANLUIGI BRENNA on Jul 29, 2011 2:56 PM
    Edited by: GIANLUIGI BRENNA on Jul 29, 2011 3:08 PM

    Hello,
    In extended classic scenario the attachments arent transferred to ECC as the source document is in SRM. The document in ECC is only a copy and it cant be modified also.
    If we have to transfer attachments, then probably implicit enhancements to standard logic might be needed.
    Regards,
    Prasanna

  • Changing the Global Control of Extended Classic Scenario

    Hi,
    We are implementing a duplicate scenario, where for a certain product category we will use classic scenario (Only contracts on SRM) and for the others ext. classic scenario (contracts,requisitions and PO's on SRM). I activated the ext classic scenario by flaging it on the customizing. I also read in the documentation that we have to use BBP_EXTLOCALPO_BADI in order to determine which category will be handled in which scenario.
    Did anybody had experience on this and provide the important points while implementing such a scenario?
    Thank you in advance,
    If you need to forward details, [email protected]
    Message was edited by:
            Gaia K.

    Hi,
    Well that quite simple
    As you have done it just activate ECS scenario and activate the badi to change to classic scenario with you custom rules (product category...).
    As soon as you get the ECS scenario configured, evrything will be ok for classic scenario.
    Kind regards,
    Yann

  • Pricing in Extended Classic Scenario.

    Dear SRM Experts,
    System: SRM Server5.5.
    Technical Scenario: Extended Classic Scenario.
    I have done base line configuration in SRM server. IPC ia active.
    [A]
    What configuration need to be done for pricing i.e CALCULATION SCHEMA in  Ext.Classic Scenario?
    """ I have maintained Number Ranges """""""
    <b>
    Also what configguration needs to be done for IV?
    """I have maintained Number Ranges for local Invoices"""
    [C]
    How will accounting entries be made in R/3......do i need to maintain any attributes or any configuration?
    I will reward points for all helpful answer.
    Best Regards,
    ANIL RAJPAL.

    Hi Anil,
    The majore part of pricing is in SD or CRM area right and for that they are using IPC, in SRM we are also using the IPC for the pricing which we need to pull from R/3 and used in SRM system.
    For Configuring the IPC u need to config following settings.
    1) IPC should be up and running.
    2) Go in SPRO-> SRM server-> Cross Application Settings-> Pricing->Process Condition Types->Process Calculation Schema->Process Condition Groups->Check Technical and Customizing Settings for Conditions.
    These are the basic setting u need to do for running IPC.
    BR
    Vijay Mittal
    Please award the points if it solve ur query.

  • PO Response (BUS2209) and Ext Classic

    Does anyoune how the PO response functionality works with the Ext Classic scenario and what is involved in config ?
    Our requirement is to update POs from vendors in EBP.
    Any information will be highly appreciated.
    Thanks
    -Bakulesh

    Hi Bakulesh,
    you can receive purchase order responses (POR) via XML or create them manually when the vendor has transmitted the purchase order response data,for example, by fax, letter, or telephone. The POR can contain the information that the vendor accepts all purchase order items and can deliver them as ordered; or information about variations from the purchase order (PO) that occur because the vendor can confirm the PO only in part.
    You normally use the purchaser role to manually create a purchase order response. As the purchaser, you decide whether POR variations need to transferred to the PO.
    The purchase order response can also be created by a central role, for example, by the secretary. If you as the secretary enter POR variations, the purchaser must approve the data transfer to the purchase order.
    You can configure the following workflows for the purchase order response:
    ·        (WS14500001)
    Automatic transfer of purchase order response data into the purchase order. The system carries out a comparison during the data transfer (background processing). If the quantity, price, and delivery date variations transmitted by the vendor are within the tolerance limits set in Customizing, and no other variations are transmitted, then the data transfer of the first inbound POR occurs automatically.
    This workflow is relevant for XML receipt or manual entry with a subsequent approval workflow.
    ·        (WS14500019)
    If the POR data differs from that in the purchase order, you can be informed via a work item. As a purchaser, you can decide for each item whether you wish to transfer the data into the purchase order or not.
    ·        (WS14500007)
    If the POR data differs from that in the purchase order, you can be informed via e-mail (with the number of the purchase order).
    ·        (WS14500017)
    Monitoring receipt of the purchase order response:
    When the flag Purchase order response expected is set in the purchase order, and a purchase order response is not received for all PO items within a specified timeframe, you can be informed via a work item.
    with regards,
    mahesh

  • Is there any Bapi for Physical Sample creation

    Hi Folks,
    Is there any Bapi for physical sample creation. My scenario is like this I have the data in the table (material, plant, batch, type,vendor, vendorbatch ). For each material i have to create a  physical sample......
    Any ideas or suggestions would be appreciated..
    thanks
    chaithanya.

    HI Chaitanya,
    You can use : BAPI_BATCH_CREATE
    it has import paramaters like Material, Plant , batch , Batch Attributes ( Vendor No, Vendor Batch etc)... I guess this is what you are looking for.
    Regards,
    -Venkat.

  • Extended Classic Scenario, BADI for PO creation in R/3

    Hi,
    We are using the extended classic scenario. When the PO gets replicated from SRM to R/3, right now the field CATALOGID is not being transmitted to the backend R/3 system.
    1) What BADI should I implement (and the method) to transmit the CATALOGID to R/3?
    2) After implementing the BADI, do I also have to change the BAPI?
    3) Is the BAPI used to transfer data from SRM to R/3, BAPI_PO_CREATE?
    Thanks and Regards,
    Peter

    Hi Peter,
    1-You can use BBP_ECS_PO_OUT_BADI for ECS scenario.
    Since the R3 PO does not have field for catalog id, the EKKO- BEDNR (Tracking Number) field can been used for example to store this information. In this BADI all the items are identified and their tracking number field is populated with a catalogue id value.
    2-If you use the tracking number field, no use of R/3 BADI is required.
    3-BAPI_PO_CREATE1
    Please check my answers in this post :
    catalogid field not going in R3 backend
    Kind regards
    Yann
    Message was edited by: Yann Bouillut
    Message was edited by: Yann Bouillut

  • Attachment transfer of PO from SRM to Back end for extended classic scenario

    Hi Experts,
         We are using the SRM 7.0 with EHP 701 and ECC 6 , we have a SRM requirement where we need to transfer the attachment of a PO to back end ECC. I tried to implement the note 1594966 , but it doesn't work . we are using Extended classic scenario. Please suggest some SAP notes or the procedure to be followed to achieve this.
    Thanks ,
    Aishwarya.M

    As far as I am aware this functionality of transferring attachment is not supported in Ext classic scneario  
    http://scn.sap.com/thread/1873708
    Also  I suggest you should debug and see if its sending attachment from SRM if yes then
    could be something missing at ECC side , To debug use this
    http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=340264144
     You may also check in SXI_monitor and see if attachment is being recieved and sent from SRM and ECC respectively
    Are you configuring this for the 1 st time or its an error which u encountered?
    You must raise a NOte to SAP for the same till a solution is found .
    This one is another which you can check ..
    http://wiki.scn.sap.com/wiki/display/SRM/Transfering+shopping+cart+attachments+to+the+backend+system

  • Configuration steps for Extended Classic Scenario

    Hi All,
    Could you please let me know what are the configuration steps required for extended classic scenario.
    Thanks in advance

    Hi,
    Important Settings that Determine the Extended Classic Scenario
    The following settings are required for the extended classic scenario:
    u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
    u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
    u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
    u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
    u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
    u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
    u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
    u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
    u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
    u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
    This is for your additional information.
    Hope this helps.
    Regards,
    Vikas

  • BAPI Required to post GR in EBP System( SRM4.0, Classic Scenario)

    Hello All,
      We have SRM4.0 with classic scenario with non-sap backend system.
    We need to post GR in EBP system automatically.
      could you please tell me the BAPI required for this?
    Regards
    Neelesh

    Hi,
    You can use function BBP_BC_CONF_CREATE of BAPI_CONFEC_CREATE.
    Kind regards,
    Yann

Maybe you are looking for