BAPI_GET_PAYSLIP not giving back any data

Hi All,
I first use BAPI_GET_PAYROLL_RESULT_LIST and pick a sequence ID from there and then input in
BAPI_GET_PAYSLIP and the payslip variant i use is the same one that is defaulted in feature EDTIN and it is the same one that is present as a variant in tcode: PC_PAYRESULT.
when i run PC_PAYRESULT for the same period it works fine and i am using the same sequence no for in BAPI_GET_PAYSLIP..Its not returning any data..then why isint this Bapi working?
any ideas?
thanks
hruser

Thanks Suresh for input, but the problem got resolved just when i was gonna do what you suggested.
the problem and the solution was very silly, here what i did.
what happened was earlier in tocde: pu00_m10_cedt when i clicked on get variant only 2 to 3 variants would show up, ofcourse one of it was my variant defaulted in EDTIN. but what it did was it narrowed down the F4 help for Form. it would only show forms pertaining to cedt_ce.
all i did was just remove the flag for global switch for concurrent employement from table t77s0
ccure-glemp and ccure-mains just removed the flag and tested the bapi and it worked and then again i put back the flags still it works..
so the difference here i noticed was now in pu00_m10_cedt when i click on get variant i have huge list of variants and even the f4 drop down for Form shows relevant forms.
so i guess the problem was variants getting cached/buffered.
thanks all for help.
screen shots for better understanding:
while i had the problem with the bapi in tocde: pu00_m10_cedt,when i clicked on get variant i wld get
[this|http://epmgdg.bay.livefilestore.com/y1pYk9M60vLuQy6QFm0ruvcy-kU0LcdRjsErR20AEHuVmJIZbYU2b2ARkGCFvLc6dw26oDTeFjoihvxc80aF8UQfw/cedt%20variant%20b4.jpg] screen straight away after i deleted and then put back the X flag to ccure-glemp and ccure-mains in T77S0
now in pu00_m10_cedt,when i click on get variant i get [this|http://epmgdg.bay.livefilestore.com/y1pT7VvHDORf29aM_5aVVCU0ojMenl4X8558dblkcmf7xKoUgZXXHiBxo7z-BHhEP2A6eqWrEvBku_AR3F9WNRMZg/cedt%20variant%201-2-after.jpg]first and when i execute as u can see more options are available like [this|http://epmgdg.bay.livefilestore.com/y1pBfJC3lHihVZG08wNnaOFj4lnPUI2noPYxPAsQjyhKEovAT--YsLcuEK7Y_L5sz6m6K4d8Xal3b5NG-E4-TCLRQ/cedt%20variant%202-2-after.jpg]
Edited by: Hruser on Dec 16, 2008 3:47 PM

Similar Messages

PSA showing Request not updated to any data target using delta

Hi BWers,
I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
Requests for PSA /BIC/Bxxxx
I see the Request updated having a Red triangle with an exclamation mark in it and it says
"Request not updated to any data target using delta"
Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
Thanks for all your help.
Manish

Reg : Delta Load : Production Data
Current Scenario :
we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
Structure underlying infocube:
2 Data Sources >> 1DSO >>1 Infocube .
Usually the Data is loaded in delta format on daily basis using process chains.
For last one month the delta is not picking properly :
Example :
A WBS Element is created 2 years back and it open and getting its update into BW ,
latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
its showing this error:
Request not updated to any data target using delta,
i went and created DTP which didnt help much Because latest isnt caputered .
if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
how to over come this as this is a production issue
Obaid : pls help me on this issue , any others expert pls help

Load status in PSA "Request not updated to any data target using delta"

Hi,
I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
There are lot of requests are there in PSA but some of them loaded with status
u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
Others u201CRequest not updated to any data target using deltau201D -- need to delete
We are deleting manually every week end.
Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
Thanks for your help in Advance,
Raj.

Hi Rajesh,
You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
Best Regards,
Bansi.

Master data loads Request not updated to any data target using delta

When checking the PSA the request updated ICON has red triangle and the mouse over says
"Request not updated to any data target using delta".
I am doing full loads for text data and both full and delta's loads for Attributes. This is BI 7.0 system but the loads are still from 3.1. DTP has not been implemented yet. The system was just upgraded in July. I am unable to schedule deletes from the PSA for successful loads. However, I think the data is updating to the info objects. My Info package has the selection to PSA then in the InfoObject package by package.
How do I schedule the deletes from PSA and why does the Request updated show red but the monitor for the info package show green?
Edited by: Joe Mallorey on Jan 27, 2009 5:46 PM

Hi shikha,
The load has not failed but I am unable to delete the load from the PSA.
If you do a manage on the Data Source or go to PSA from RSA1 the first column has the green gear icon instead of a green check mark I have red triangle the mouse over says "request not updated to any data target using delta" The data has loaded to info object. I am trying to schedule deletes from the PSA and using the option to "delete only successfully booked/updated requests" So how do I get the request updated column to show a green check mark so my deletes will Process? This is for master data only. My transactions load fine and delete properly according to my settings.
Thanks for the reply.
Regards,
JoeM

Request not updated to any data target using delta

I am on BI 70 using 70 DataSource. I executed InfoPackage in full update, then ran DTP in full mode. There is only 1 data target. The requests were successfully updated in the target DSO. However, when I checked the datasource PSA, the requests were showing u201CRequest not updated to any data target using deltau201D with red triangle.
My questions are:
1. Is this normal?
2. I need to do more full loads. When I run DTP (in full mode) again, will it re-load those PSA requests (the ones already in DSO) to the same data target?
Thank you.
Rebecca

Hi Rebecca,
To answer your questions
1. Yes. This is normal.
2. Yes. When you run DTP in Full Mode again, this PSA request (along with any other subsequent loads you might have done to PSA) would be re-loaded to the same data target .
If this is not required you can set the DTP to delta mode. This ensures that the PSA request is updated to data target only once.
Hope this helps!
- Meera

Google search does not work. It does not bring back any results and disables my internet connection until I close the brower, wait, and then open it again.

Google search does not work. It does not bring back any results and disables my internet connection. I have to close the browser, wait, and then open it again. It only seems to happen when I am signed into my Google account. If I am signed out the search functions properly.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br /><br />
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
*http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

I've been trying to download something called silverlight on my computer. It asked for my password, which I thought I knew. Now I can't remember it and it's not giving me any instructions to reset my password. Any help?

I've been trying to download something called silverlight on my computer. It asked for my password, which I thought I knew. Now I can't remember it and it's not giving me any instructions to reset my password. Any help?

Changing or resetting an account passowrd(Snow Leopard oe earlier)
http://support.apple.com/kb/ht1274
Reset the user password in Mac OSX Lion, Mounatin Lion and Mavericks:
https://discussions.apple.com/docs/DOC-4101

HT5569 I can't connect my WIFI to my router and its not giving me any networks to join or connecting to anything wireless.

Is there anyway I can talk to a tech person?

You are not addressing Apple here. We are all just users like yourself
Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Is it this?
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Fact-tables not resulting in any data

hello experts;
I am trying to create a mock-up report in OBI Answers and somehow Im having a problem with metric columns. When I pick any metric column then I get the: *(No Results: The specified criteria didn’t result in any data)*
But when I pick just the fact tables, I see the results. I have doubled checked the rpd; the schemas btn the dimension and fact tables looks ok to me. I have tried union with another subject area, I get the same error. Anyone with an idea why fact tables are not collaborating with dimension tables?
will appreciate your help

Hi,
Can you try to check the physical SQL generated by the reports? and see if that query is returning result in the DB or not.
I am sure this will help you to find the root cause.
Regards,
Kashi

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

Required attribute does not work with any data type other than String

sir,
I am a new to JSF. My problem is that I have used an integer type data in my page which is taking its value from a bean.But in jsf code I have used the required attribute for the <h:inputText> but if I leave the text box empty it is not showing the validation error which it show show. Another problem is that the page is also not navigating to the next page.
The code is
<h:inputText value="#{UserBean.age}" required="true"/>
where age is of integer type

Well. The fact that it is not jumping to the next view is "works as required". The assumption is, that once you say a field is required, it could be that the application CANNOT function without that value. Therefor the initial view is redisplayed until all required values are entered.
IF you need a different behaviour, then the OptionalValidator-package which is currently in development state, is the way to go. It allows to specify different validating strategies for different links on a view (no validation, soft validation (== allow to go on, but produce warning messages), hard validation (== the way JSF works right now)). The problem is that with JSF 1.1 it is quite difficult to implement this behaviour. For simple validators (no parameters) it is working, but for complex validators (requiring parameters) not yet. For more info: http://wiki.apache.org/myfaces/OptionalValidationFramework
No comment on the String-only behaviour, as I have not yet tested/observed that problem...
hth
Alexander

The ICloud log in screen is dim, and will not respond to any data entry

My IMac wants me to sign in to ICloud, but the screen is slightly dim and will not accept any data

Please click iCloud - Learn how to set up iCloud for instructions on how to setup iCloud.

Option key not giving me any drives to boot from

Hello,
I have just installed Win 8.1 via Boot Camp on my Mac Pro (mid-2010) using OSX10.9. I was under the impression that on restarting if I pressed the option key, then I would get all available drives and then be able to choose which one to boot from but in my case, not so. Rebooted and the option key is recognised; I get a blank screen (as I would expect) and a cursor which is controllable but then no drive options appear.
I have three possible boot disks: a Win8.1 partition and a 10.9 partition on on internal HD plus a 10.9 on a Sonnet Tempo SSD plugged into my PCIe slot. I am wondering if the Tempo is the issue and Boot Camp does not like it (is it Boot Camp that controls the option key restart process?). Before I start pulling the Mac Pro apart, I was hoping to get some advice please.
Any ideas what could be wrong please? Thank you.

No, it won't show up in Disk Utility, but have a look at the screen shot. Straight off your hard disk (if you're on Lion this will be at the BOTTOM of your sidebar pane in Finder). If you have the folder marked in yellow and the folder marked in purple called rEFItBlesser please TRASH both.
Be CLEAR: do not remove the Library folder or the StartupItems folder (both marked in purple, too). Remove only the rEFItBlesser folder at the end of the path. You can (and should) remove the whole of the efi Folder (in yellow).
Then restart.
Message was edited by: softwater (corrected 'file' to 'folder')

External Synth not Playing Back midi data

Hi everyone
I have one FF400 connected to a Mac G5 2.3 dual core,using Logic Studio 8 as sequencer.
I connected to the MIDI port 1 > Korg dw 8000 (master) > Kenton midi converter connected to a Juno 60 (via midi trhu of the Kenton box)...
In the MIDI port 2 i connected an old Oberheim OB8 with midi.
Well...When i start to record in Logic 8,everything is workin fine with the midi port 1...Logic record the midi notes file and the audio come out
by the synth connected to the midi port 1 in playback mode!!
If i try to do the same with the Oberheim connected to the Midi port 2,Logic record the midi notes files but no audio is coming out by the Oberheim
in playback mode!!
If i try to connect the Oberheim to the Midi ch 1,it work very well!!
I'm getting very bored about
please help me

skinstretcher wrote:
I'm having similar problems where midi notes get recorded but won't play back. They 'sound' when I click on them, but that's all. Also, the region appears pale for some reason.
Your region is muted. Select it and hit 'M', it'll unmute.

.bat file result not giving correctly in data services

Hi ,
I am using .bat file to count the number of files in the folder. I want to capture the value of the number of files.
I have written small .bat file as shown below
@echo off
setlocal enableextensions
CD %1
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
I have used this batch file in the script as shown below.
$COUNT =exec('D:\\test.bat', 'D:\\docs',8);
print($COUNT);
In the above $COUNT is varchar(255).
actually i have only 11 file sin the docs folder . But it is giving the 442 files.
If I run the same batch file in the windows cmd command I am getting the correct result.
Please let me know what will be issues?
I am unable figure out the issues for weird result when I am using DS.
Please help me in this issue.
Thanks & Regards,
Ramana.

Hi,
While executing the batch file it is taking the Data services installation directory path as shown below.
14504 6420 PRINTFN 3/30/2015 9:40:10 AM 0: C:\Program Files (x86)\SAP BusinessObjects\Data Services\bin File count = 442
I have changed the the batch file with two parameters. one for changing directory and another one for changing the folder.
Now my batch file looks like this.
@echo off
setlocal enableextensions
%1:
CD %2
echo %CD%
set cnt=0
for %%A in (*) do set /a cnt+=1
echo File count = %cnt%
endlocal
Then my script is like this .
$COUNT =exec('D:\\test.bat', ' D D:\\docs',8);
print($COUNT);
Now it is giving the expected result as shown below.
14700 13912 PRINTFN 3/30/2015 9:52:18 AM 0: D:\Docs File count = 11
Thanks & Regards,
Ramana.

BAPI_GET_PAYSLIP not giving back any data

Similar Messages

Maybe you are looking for