BAPI or FM for Material and ChapterID Combination(J1ID Transaction)

Dear All,
                I need BAPI or FM  for Creation of Material and ChapterID combination. I dont need for other options present in J1ID Transaction.
I cannot use Insert statement  for Material and ChapterID  Creation  as it contains only few fields.
Please let me know regarding this.
Regards,
Anilkumar

Hello
The bapi BAPI_INSPECTIONPLAN_CREATE is used for creation. There you can assign several materials through structure MATERIALTASKALLOCATION (BAPI1191_MTK_C). There is no bapi for modifications so you can assign other materials using LSMW or BDC as Gururaj told you or in this special case populate table MAPL directly (better talk to your ABAP to decide it); I did it without issues and I checked and the function CZ_VB_MAPL_POST could update the information you need (talk to your ABAP to validate it).
Best regards
Carlos Díaz

Similar Messages

  • Tables for production order number for material and Batch combination

    Dear Experts,
    Please suggest the table names for finding the production order for material and batch combination .
    Thanks in advance for your help...
    Best regards
    Nitishj

    Dear
    Please check in  AFPO-CHARG
    AFPO          Order Item Detail -Batch Number -CHARG
    AFFW         Confirmations -- Goods Movements w
    AFRD          Confirmations -- Defaults for Collective Confirmation
    AFRH          Confirmations -- Header Info for Confirmation
    Regards
    JH

  • User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

    Hello all,
    my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
    please suggest the user exit.

    Hi
    CASE 1 : All Plants are excisable.
    In Material master , Foreign Trade data tab-  mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
    CASE 2 : Few Plants are excisable
    In the Case 2 you need to go for Enhancement
    Program Name : MV45AFZB 
    User Exit:            USEREXIT_CHECK_VBAP ( Item Level Check )
    By using above user exit you write a logic with the help of ABAPer
    Plant and Chapter ID combination table : J_1IMTCHID

  • Bapi or method for opening and closing quantity of material

    Hi Friends,
    Is there any Bapi or Method for Opening and Closing Balence quantity of material
    plz tell me if any.
    Thanks And Regards.
    Devalla T Kr.

    Hi ,
    try this one.
    https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=15856
    from this code u need to ignore Ztables.
    regards
    Prabhu

  • Stock overview based on material and vendor combination

    Hi Gurus,
    I have a scenario, for three materials A , B, C was bought out from 5 vendor,  how to display the stock with material and vendor combination. In client place, the three material (A , B,C) which were bought from same vendor are issued to cost center. Client wants to know the stock based on vendor.
    Thanks in Advance.

    Hi,
    In my opinion you have the following options - basically:
    1) Use different material numbers for the physically same material you procure from different vendors (this is the dummiest solution, not recommended)
    2) MPN (manufacturing part number) - you use different material numbers corresponding to each vendor . But these materials will be lnked:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee15c655c811d189900000e8322d00/frameset.htm
    3) Batch management
    option1 - You apply a certain logic to batch numbers and based on batch number you can distinguish from which vendor the stock was procured.
    option2 - You can also use "not speaking" batch number, but here it's more sophisticated to find out from which vendor it was procured
    option3 - You can classify the batch and in one of the characteristics you can store the vendor's number
    option4 - In the batch master (table MCHA) you can find a "vendor" field (MCHA-LIFNR) - using development you can populate this field at the time of GR
    4) Split valuation - you can maintain separate valuation type for each vendor. I think it is recommended only if you want to manage the moving avarage price separately
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee0d4d55c811d189900000e8322d00/frameset.htm
    Regards,
    Csaba

  • How to find material and vendor combination which has freight conditions?

    Hi Please help me, its very urgent.
    How to find material and vendor combination which has freight conditions?
    Waiting for your help.
    Regards,
    Marella.

    Hi marella,
    Try MEKA transaction.
    Gopi

  • MB5L Report Discrepacy for Material and Stock Account Currency

    I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.

    Hi,
    Here's some information from help. Variances can occur for the following reasons:
    You have entered postings to the stock account manually.
    The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
    Check Account Determination - OMWB
    The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
    Cheers !

  • What are the T-codes that contain the master data for material and vendor?

    what are the T-codes that contain the master data for material and vendor?

    hi ,
    - Display Material  tcodes...
    MM01 - Create Material
    MM02 - Change Material
    MM03 - Display Material
    MM50 - List Extendable Materials
    MMBE - Stock Overview
    MMI1 - Create Operating Supplies
    MMN1 - Create Non-Stock Material
    MMS1 - Create Service
    MMU1 - Create Non-Valuated Material
    ME51N - Create Purchase Requisition
    ME52N - Change Purchase Requisition
    ME53N - Display Purchase Requisition
    ME5A - Purchase Requisitions: List Display
    ME5J - Purchase Requisitions for Project
    ME5K - Requisitions by Account Assignment
    MELB - Purch. Transactions by Tracking No.
    ME56 - Assign Source to Purch. Requisition
    ME57 - Assign and Process Requisitions
    ME58 - Ordering: Assigned Requisitions
    ME59 - Automatic Generation of POs
    ME54 - Release Purchase Requisition
    ME55 - Collective Release of Purchase Reqs.
    ME5F - Release Reminder: Purch. Requisition
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB21 - Create Reservation
    MB22 - Change Reservation
    MB23 - Display Reservation
    MB24 - Reservations by Material
    MB25 - Reservations by Account Assignment
    MBRL - Return Delivery per Mat. Document
    MB1C - Other Goods Receipts
    MB90 - Output Processing for Mat. Documents
    MB1B - Transfer Posting
    MIBC - ABC Analysis for Cycle Counting
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI01 - Create Physical Inventory Document
    MI02 - Change Physical Inventory Document
    MI03 - Display Physical Inventory Document
    MI31 - Batch Input: Create Phys. Inv. Doc.
    MI32 - Batch Input: Block Material
    MI33 - Batch Input: Freeze Book Inv.Balance
    MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
    MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
    MIQ1 - Batch Input: PhInvDoc. Project Stock
    MI21 - Print physical inventory document
    MI04 - Enter Inventory Count with Document
    MI05 - Change Inventory Count
    MI06 - Display Inventory Count
    MI09 - Enter Inventory Count w/o Document
    MI34 - Batch Input: Enter Count
    MI35 - Batch Input: Post Zero Stock Balance
    MI38 - Batch Input: Count and Differences
    MI39 - Batch Input: Document and Count
    MI40 - Batch Input: Doc., Count and Diff.
    MI08 - Create List of Differences with Doc.
    MI10 - Create List of Differences w/o Doc.
    MI20 - Print List of Differences
    MI11 - Physical Inventory Document Recount
    MI07 - Process List of Differences
    MI37 - Batch Input: Post Differences
    for vendor..
    XKN1  Display Number Ranges (Vendor)
    XK01  Create vendor (centrally)
    XK02  Change vendor (centrally)
    XK03  Display vendor (centrally)
    XK04  Vendor Changes (Centrally)
    XK05  Block Vendor (Centrally)
    XK06 Mark vendor for deletion (centrally
    XK07  Change vendor account group
    XK11  Create Condition
    XK12  Change Condition
    XK13  Display Condition
    XK14  Create with cond. ref. (cond. list)
    XK15  Create Conditions (background job)
    reward points if useful,
    venkat.

  • Function modules for material and description

    Hi,
    Pls let me know the function module for material and description.
    Regards,
    Bala

    Hi,
    Please use FM: MD_MATERIAL_GET_TEXT
    Reagrds
    Raju

  • UWL Integration for Material and Customer Repositories

    Hello all,
    Has someone done the UWL Integration for Material or Customer repositories? Do we have to write own XML Configuration file for UWL and upload? or is that supplied by SAP somewherer for Material and Customer repositories?
    Any pointers in this direction are highly appreciated.
    Thanks
    Suman

    Hi Suman,
    You can create your UWL Configuration file through UWL Cofiguration file wizard.
    The path is navigate to System Administration  System Configuration   Universal Worklist – Administration.
    Under Universal Worklist Content Configuration select Click to configure item types and customize views using a wizard.
    Thanks
    Namrata

  • Table for Material and Inspecton lot together?

    Dear SAPIENTS,
    Please tell me table for Material and Inspecton lot together.
    Regards,
    Kaushal Rai

    Hi Kaushal,
    - Run trx QA08.
    - Select the option Activate inspection type. (This tab should be green)
    - Enter material type at least to not have a junk of data at a single execution. You can set other fields as per your requirement.
    - Check the Box "Assign Inspection type", Don't check/activate any of the rest three
    - Enter the inspection type, here is an limitation you can know the status inspection type by type.
    - Execute.
    - The system will give you the list of the materials that are note activated for the inspection type you feed in the selection screen.
    Hope it satisfy you. at the other way me and you both will search for the better option.
    Regards,
    Shyamal

  • Characteristic values for the material and plant combination...

    Hi Friends,
    I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
    Thanks in advance,
    Ram

    Hi Rajendra,
    Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
    Regards,
    Ram

  • Aavlaibility check for material and Substitution material

    Hi Gurus,
    I have a requirement where in I need to check the availability of a material and if there is not availability then I need to find out the substituted material maintained for the material.
    for example, Material M1 has no stock in ECC and Material M2 is maintained as substitution in the SCM system. I need to figure out the tables or any Function module that can fetch the Material M2 if I provide Material M1.
    I am able to check the material availability using the BAPI "BAPI_AVAILABILITY_CHECK". But I didnt find any FM or way to find the substituted material for a material.
    Please help me out.
    Thanks.
    Anand.

    I don't know about SCM, but in R/3, the material determination process is based on the standard procedure/access sequence setup.  If you trace the condition record maintenance, you will find your table name.  If the SCM setup doesn't work that way, there will still be a master data setup step that you can trace and find the table.

  • How to Implement Dynamic Modification Rule for Material & multiple vendor Combination

    Hi Team,
         In dynamic modification rule for Material &  vendor combination, i have maintained material & vendor in Inspection plan at Material Assignments
    1.If i purchase same material from different vendors then how to implement ?

    Hi Balaji,
    I am not sure if i have followed your requirement.
    What do you want to do with Vendor Z? Do you want to inspect each lot from Z?
    If yes:
    Then Create 2 Inspection plans with same Operations and Same MICs, In Material Assignment, mention Vendor as Z so that 1st inspection plan will only be for Vendor Z. Do not enter DMR in Header.
    In 2nd inspection plan Enter DMR and do not mention any vendor so this plan will be applicable for all vendors except Z.
    If No:
    Then create Qm info record for vendor Z with "No inspection" set in QI06.
    Amol.

  • Report for material and their pricelist

    Hi all
    I want to create a report, which displays the material and their pirce, I know there is a t-coke vk13, but u know the end users......actually i want to have this pricing for only service dept, where sales org , div , pricelist type are fixed.
    I am not able to find the tables which have these relations of material and price.
    I got one table A961, which doesnt shows the price, and price I found in KONV, but there is no relation between them......can any body help me out.....
    Kind regards
    AJ

    Hi
    i cant find the material desc there, also fields like divison , Price list type are missing, they are not there in both the tables, can u tell me which other table I can use , so that I can get all the fields
    regards
    AJ

Maybe you are looking for