BAPI or FM to update Credit profile of a Business Partner(BP) In ECC

Hi,
We have a requirement to Update the Credit Profile of a BP in ECC. I couldnt find a BAPI or a FM to update the credit profile of a BP. Any input on this will be helpful.
Regards,
Raj
Duplicate post locked
Edited by: Rob Burbank on Jul 1, 2009 5:15 PM

Hi Raj,
Partner Profile - Defines the partner type with whom you communicate asynchronously via IDocs.
T code used for maintanance : WE20 or BD82.
Prereqisites ,( To configure the partner profiles)
1. Master data must be available in the system for partners.
2. A port is created to assign in the outbound partner profiles. (already configured)
There are 6 types of partner profiles, namely
1.Logical system - used for ALE. Used particulary for data exchange. Distribution od data in R/3 or ext. systems..
2.User
3.Vendor
4.Customer
5.Bank
6.Business partner
Partner Type - Partner type are used to classify the business system.
Ex: Logical System (LS) for other SAP clients,
Customer (KU), Vendor (LI) etc..
Regards,
P Bansal

Similar Messages

How to update Credit profile of a Business Partner(BP) In ECC

Hi,
We have a requirement to Update the Credit Profile of a BP in ECC. I couldnt find a BAPI or a FM to update the credit profile of a BP. Any input on this will be helpful.
Regards,
Raj

Hi Raj,
Partner Profile - Defines the partner type with whom you communicate asynchronously via IDocs.
T code used for maintanance : WE20 or BD82.
Prereqisites ,( To configure the partner profiles)
1. Master data must be available in the system for partners.
2. A port is created to assign in the outbound partner profiles. (already configured)
There are 6 types of partner profiles, namely
1.Logical system - used for ALE. Used particulary for data exchange. Distribution od data in R/3 or ext. systems..
2.User
3.Vendor
4.Customer
5.Bank
6.Business partner
Partner Type - Partner type are used to classify the business system.
Ex: Logical System (LS) for other SAP clients,
Customer (KU), Vendor (LI) etc..
Regards,
P Bansal

Collection Specialist - Collections Profile Tab of Business Partner.

Hi,
We are using the SAP FSCM Collections Management module. When I assign the collection profile to the Business Partner on the Collections Profile Tab, the Collection Segment, Collection Group are populated based on the configuration but the Collections Specialist does not get populated.
Can someone please throw some light on this if they have experienced this issue?
Thanks & Regards,
Bhairav Naik.

Hello Mark , actually I dont think that is possible to transfer data related to collection profile (displayed in BP master data for a BP with colletion managemnt role) from Cusotmer master data because this kind of information are not availabe as my knowledge in Cusotmer master
Solution could to transfer all other available data from Cusotmer data to BP and once transferred update mannually the collection profile.
I have seen also a program ( transaction UDM_BP_PROF) to update collection profile automatically, but I did not manage to make it work on a exidting BP.
What do you think about this approach?

Updating extended fields in SRM Business Partner Web Dynpro UI does not work

Hey community,
I'd like to extend the SAP SRM Business Partner Web Dynpro (SRM 7.13). I did it like in SAP Note 1386310 described. Everything works fine, the fields show the correct data. But updating these fields does not have any effect.
I only want to extend the existent fields NAME_ORG3 and NAME_ORG4. I did the following steps:
- Because of the fact that the fields are existent and not custom, I skipped the extension of structures INCL_EEW_BUT000 and INCL_EEW_BUT000_X (ok, in utter despair I even tried this, but of course I got the message "fields already exist...")
- I added the 2 fields to the SRM business partner data transfer structure INCL_EEW_BP_CSF_COMPANY_DATA.
- In Web Dynpro /SAPSRM/WDC_MODC_NAME, view V_PS_OIF_NAME I added the fields NAME_ORG3 and NAME_ORG4 to the context node COMPANY_DATA
- I added corresponding Input fields and labels to the WD layout.
- in view /sapsrm/v_mdfsbc I customized the new fields
-> the new fields are visible in the WD, and, oh wow, they even show the correct data!
-> Unfortunately, updating the fields does not work, but000 does not get any data.
Debugging the function "bupa_central_extincl_change" brings up, that function BUP_MEMORY_BUT000_GET gets a but000 structure with filled NAME_ORG1 and NAME_ORG2, but NAME_ORG3 and NAME_ORG4 are empty.
I also regarded SAP Note 1453747, but the code was already right.
Any Ideas? Many thanks in advance!
Steffi

Hi Stefanie Krause,
I am also facing the same problem
I added the one fields "APPROVAL_EMAIL” to the SRM business partner, data transfer structure '/SAPSRM/S_CLL_BP_COMPANY_DATA ' . I have appended the structure.
I added corresponding Input fields and labels to the WD layout.
-> the new fields are visible in the WD,
-> i am able to visible the input field in WD,
But if add some value press on next tab and back to the screen the value will be refreshed .
Kindly help me
Thanks and Regards,
Maruthi.M

FSCM TCode: UKM_BP, create BDC to Update Credit Profile

We get the following error trying to update risk class, etc. in background BDC created with the recorder, "Control Framework: Fatal error - GUI cannot be reached". Any suggestions? Thanx.

You are likely using an EnjoySAP transaction. These don't run well in the background because they heve to interface with the GUI. If there's an older version of the transaction or a BAPI, you should try that.
What is the transaction?
Sorry - I see it's UKM_BP. Is this CRM or SRM?
Rob
Message was edited by: Rob Burbank

BAPI to Update Title of Business Partner ( Table BUT000 )

Hi
Which BAPI can be used to Update the TITLE field of Business Partner ( Table BUT000 ) ?
Warm Regards
Moderator message - this forum is not meant to replace research that can be EASILY done by the OP. Please read the Research Resources and Rules of Engagement sticky for links.
Edited by: William Eastman on Nov 16, 2009 2:59 PM

BAPI_ISUPARTNER_CHANGE
Use this bapi
pass corresponding X in PARTNERDATAX along with PARTNERDATA
Regards,
Prajakta

Business Partner -Credit Management

Hi Experts,
I am facing a tricky situation. This problem is coming in Credit Management(FSCM) of Business Partner (Transaction - BP).
My Functional Consultant has activated the Credit Management role in business partner. I added some of the table in BP by using EEWB. Now, There is a push button called 'Import data' in 'credit profile' tab. My requirement is like this - when the push button 'Import data' will be pressed, one XML file with full data of Business partner would generate. My question is where i have to write code for generating XML file or which BADI i have to use? I have already tried with all methods of BADI 'UKM_CREDIT_INFO' but this BADI is not working when i click the pushbutton.
Can any expert suggest me.
Thanks in Advance.

Hello Shirish,
Did you resolve this issue? What BAdI and method you used to fix this issue.
Thank you

Update Business Partner..

Hi Experts,
Have a custom Field in Business Partner. I need to update this Custom Field.
please help me with some bapi to update the custom fields in Business Partner.
or some way to update the zfield in the table BUT000.
thanks,
regards,
akshay ruia.

Not sure, may be this thread helps you
Business partner table update(BUT000)

DTW problem when updating business partner

Hi Experts,
I want to update business partner master data via DTW.
I only want to update the Remarks.
In my import file only the fields RecordKey, CardCode and FreeText are filled.
Example:
RecordKey: 1
CardCode: C20000
FreeText: My Remarks
The import is successful and the remarks were filled but the DTW has also updated other fields in the business partner master data.
Before update via DTW the business partner has no payment methods included on the payment system tab but after update via DTW the payment method is included and is defined as Standard.
Any idea?
Thanks for help.
Jacqueline

Hi,
yes, the existing payment methods were defined manually before update.
But the payment method was not included for that business partner.
Here are some hardcopys before update and after update.
[BP Master Data Before Update DTW|http://www.sap-potsdam.de/BoneUpload/BP_before_Update.JPG]
[BP Master Data After Update DTW|http://www.sap-potsdam.de/BoneUpload/BP_after_Update.JPG]
Jacqueline

Update accounts receivable of business partner

I want to update the accounts receivable of business partner through codng.For this I have used the following code-
Dim objBP As SAPbobsCOM.BusinessPartners
Dim lngStatus As Long
     Dim boolFlag As Boolean
boolFlag = objBP.GetByKey("CA009")
If boolFlag = True Then
objBP.AccountRecivablePayables.AccountType = SAPbobsCOM.BoBpAccountTypes.bpat_Receivable
                objBP.AccountRecivablePayables.AccountCode = "140000"
                objBP.AccountRecivablePayables.SetCurrentLine(0)
                lngStatus = objBP.Update
End If
But the business partner is not getting updated.What is the error in the above code ?

Alexander,
      I am updating the account.For this I am using following code,
objBP.AccountRecivablePayables.SetCurrentLine(0)
objBP.AccountRecivablePayables.AccountCode = "_SYS00000000254"
lngStatus = objBP.Update()
Now I am not getting any errors,but the business partners are not getting updated.

Set Credit Limit on Business Partner

HI all,
I am trying to set the credit limit on the Business Partner object using VB. From what I have learned its a Double value. I read in the value from a file which means its a String so i try to convert it to a Double like this:
oBP.CreditLimit = Convert.ToDouble(creditString)
but i am still getting the error "Conversion from string "" to type 'Integer' is not valid" when I try add the Business Partner.
Can someone please help me to set the value of the credit limit byt converting a string to double??
Thanks a mill!
Greeshma

Hello Vitor& Gordon,
Thanks for you responses.
Gordon, if i try your way i still get the same error.
Vitor, if I try your way i get :-
"Input string was not in a correct format"
I'm printing out the string and I can see it looks like 20000 for example but for some reason when i use Convert it says conversion from String to Integer is not valid. I further do not understand this funciton as I am expecting a Double as a return value and not an Integer.
What am i missing??

LSMW what BAPI to use to load Business Partner?

Could anyone tell me what BAPI to use for business partner? i think its part of CRM..... I'll work out what a BAPI is later! But i gather batch recording is not the go?
I don't know anything about SAP, BAPIs and Idocs and Batch recordings!!! I have a number of flat files, I want to import please show be some direction, would be appreciated.
mike

Thanks,
Yes we have used the recording tool and actually loaded one file in the SAP system, as a test, however we have fields in "tabs" ie one customer has many phone numbers - a multi structure record. I believe the recording tool is no good for such cases!
I'm not sure whether I have need to have one input file or whether I need to have two files one for cutomer and another for phone details.
The 2nd question is my original question what BAPI or other method can I use for customer (business partner) details, as the recording method is no good for data with 1 to many relationships. HELP!

Add/Update Business Partner Error 5002

Hi,
I'm having problem with the DI API. We are testing our application with SAP B1 SP1 PL 34. With this version, it seems impossible to add or update a business partner. oBP.add and oBP.update always return the error -5002 with no description.
I even have the error if I remove every line of code that change something on the bp. So, I have a code like this that return the error -5002
oBP.GetByKey(intBPID)
oBP.Update
How this can return an error if we change nothing otherwise it is a bug ?
Anybody has an idea or suggestion ?
Thank you for your help
Jodérick Picard

Hi,
I've more details.
I was testing the update with my code :
oBP.GetByKey(intBPID)
oBP.Update
and I found some business partner where the code works ok, BUT most of the business partner doesn't work.
All business partners update without error in SAP B1. So how could it not work with the SDK when the data itself is valid for SAP B1 when using the GUI?
Thank you
Jodérick Picard

BAPI or FM to update GL Account Updation at Comppany Code Data (FSS0)

Hi all,
i want a BAPI or FM to update GL Account Updation at Comppany Code Data (FSS0)
SAP Easy Access Menu -> Accounting -> Financial Accounting -> General Ledger -> Master Records -> Individual Processing -> In Company Code.
Thanks

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

IOS 6.1.4 released for iPhone 5 Adds an Updated Audio Profile for Speakerphone

Apple has just released an Over the Air update for the iPhone 5. It seems to only provide an updated audio profile for the speaker phone. Nothing else listed in the change log.
I would assume that there will be an iTunes downloadable update available shortly.

It obviously is because you didnt understand. The iphone 4's last update to IOS 6.1.3 in some cases caused the phones speakers to not work (in which this happened to mine and a few people I know) which some people got rid of their phones. HENCE the AUDIO UPDATE that they recently posted but only iPhone 5 can download the update. That is my problem. I have alot of apple products diesel vdub and have had apple for a long time but I can't seem to understand why they would do this and I posted this in hopes to find more people that have had this issue and if they did anything to help fix it this issue. Thank you for your concern though.

BAPI or FM to update Credit profile of a Business Partner(BP) In ECC

Similar Messages

Maybe you are looking for