BAPI or function for FB03 workflow overview

Hi community.
First of all, I'm not pretty sure if that's the right section, so sorry if not... >_<
Regarding my issue, I'm looking for a BAPI (if it exists) to get the same data as menu > Workflow >workflow overview in FB03 transaction. If a Bapi does not exists, is there any other way to get this data?
Thanks a lot for any help you can provide.
Regards,
C.

Hi Chaiphon.
Thanks for your answer.
I'm interested on getting the workflow's history (with all the agents, the tasks and so on).
Using a trace with st05, I checked the tables where I can get the data, but I was hoping that there was an existing function or BAPI that can do this... Or part of it. So that I won't have to do specific development for this (I'm trying to use as many standard functions as possible).
Hope this helps.
Regards,
C.

Similar Messages

Cannot view workflow log via Services for Object Workflow Overview

We recently had an upgrade of R3/ECC and discovered a new issue. For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03). We get the message "There are no workflows that have already worked with this object". However, we have confirmed via SWEL and other t-codes that the workflow and log do exist. This seems to be the only object we have this issue for after the upgrade.
Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
Thanks,
Matt
Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

Found the solution. See OSS note 553246. This has been tested and works for us.   -Matt
Note 553246
Summary
Symptom
In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
Other terms
MM01, MM02, MM03
Reason and Prerequisites
As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
Solution
With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
METHOD if_ex_gos_mult_publish~add_objects .
DATA:
    ls_lporb TYPE sibflporb.
READ TABLE ct_lporb INTO ls_lporb INDEX 1.
if ls_lporb-typeid = 'BUS1001006'.
    ls_lporb-typeid = 'BUS1001'.
    append ls_lporb to ct_lporb.
endif.
endmethod.

SRM 7.0 EHP1 - new functions for BRF workflows

Hi all,
We currently upgraded our SRM 5.0 system to SRM 7.0.
We need some inputs whether to activate the EHP1 for SRM 7.0
Are there any limitations in terms of BRF workflows which are now covered in SRM 7.0 EHP1?
In SRM 5.0,we were using n step header level approval workflow using the BADI and custom tables for approval determination.
We need to map the same in SRM 7.0 now but wanted to know the limitations in terms of any new functionalituies which can be used in terms of Shoppign cart workflow in SRM 7 EHP1 v/s SRM 7.0 SP10.
I read in one of the posts in the forum that parallel processing for BRF workflows is not supported in SRM 7.0 EHP1.Please advise.
Please advise.

Thanks Saravanan.
We are having lot of issues with the ACW in SRM 5.0 and hence plan to reimplement the workflow in SRM 7.0 using the process controlled workflows plus the new features introduced for workflow.
Can you please advise if ACW are better than PCW or vice-versa??
I dnt have the link for the post but cans someone confirm if parallel processing is supported in SRM 7.0 EHP1 workflows??
Are there any shortcomings in terms of the BRF workflows in SRM 7.0 EHP1?

BAPI or FUNCTION for reverse a Cash Journal document

Hi,
Somebody now a bapi or function to reverse a Cash Journal document?
I need to use this in a program.
Thanks,
Nohemi.

Hi,
Can u help on this issue.
regards,
zafar

Bapi or Function for CJ42 transaction - detail values

We have the need to import values to plan the revenues of a WBS of a Project from an Excel spreadsheet to transaction CJ42.
After searching on the forums, I've found a solution to load TOTAL values by using function KBPP_EXTERN_UPDATE_CO (OSS note 625613).
But we need also to load DETAIL values, having the ability to choose the Cost Element and the Period where the value is stored.
Exists any function or Bapi that can do this?

With transaction BDBR/DX Tools I saw that your LSMW it's linked with Bapi BAPI_ACC_REVENUES_POST, which generates a CO document. That isn't what we need.
Adding some info on the issue:
We made a transaction to import costs for a given WBS and Version that loads values to CJ40; on this case, the detail values are loaded with bapi BAPI_COSTACTPLN_POSTACTINPUT and total values are loaded by a BDC.
I would like to do a similar process for the revenue values on CJ42.

Where do I find inbuilt library function for calling workflows using custom button

Hi,
I was trying this link.
I have doubt in the step 9, where do we get this script from /_static/_common/scripts/RibbonActions.js
Kindly share your thoughts,
Regards,
Rekha.J
Regards, Rekha.J

Hi Rekha,
If you are using MS CRM on premise version you can have access to that location. This is a system file.
Assume your CRM is installed on C drive then the location will be.
C:\Program Files\Microsoft Dynamics CRM\CRMWeb\_static\_common\scripts
Note:making any change in CRM system files comes under unsupported customization.
Hope this helps,
Yusuf
If you find this post helpful then please "Vote as Helpful" and "Mark As Answer". Thanks and Regards, Mohammad Yusuf Ansari
http://microxrm.blogspot.in

Mass approval functionality for SRM work items

Hi,
We want to implement mass approval functionality for SRM workflow, so that any user is able to approve/reject multiple requests at one go through UWL.
Please guide if it is possible to implement this functinality for task id TS40007952.
Regards,
Avantika

Hi Avantika,
The mass approval functionality can be implemented for simple workflow items which have decisions to complete the work item. (User Decision Type)
In SAP Business Workflow, user can define a task as a decision task by assigning DECISION as the underlying business object type. The task definition allows user to create two or more decision options to complete the task.
The idea is to simply create a custom view/subview for the UWL item and configure it according to your needs.
Have a look at this blog:
Mass/Batch Processing of Work items in UWL
and also check the documentation:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/4e/72112bc9ea484196f2a5fdc68f5f5f/frameset.htm
Let me know if you have any questions.
Thanks,
Shanti

Bapi or function module for Tcode F-54

Hi,
I need Bapi or Function moudle for tcode F-54. I am developing interfaces. I have to clear the the advance amount against an invoice.
Regards,
Dhanunjaya Reddy.

Hi,
Check the below userexits
F050S001            FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002            FIDCC1: Change IDoc/do not send
F050S003            FIDCC2: Change IDoc/do not send
F050S004            FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005            FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006            FI Outgoing IDoc: Reset Clearing in FI Document
F050S007            FIDCCH Outbound: Influence on IDoc for Document Change
F180A001            Balance Sheet Adjustment
FARC0002            Additional Checks for Archiving MM Vendor Master Data
FEDI0001            Function Exits for EDI in FI
RFAVIS01            Customer Exit for Changing Payment Advice Segment Text
RFEPOS00            Line item display: Checking of selection conditions
RFKORIEX            Automatic correspondence
SAPLF051            Workflow for FI (pre-capture, release for payment)

Enable service of objects -workflow overview-workflow log for IDOCS?

Hi everyone,
I need to enable service of objects -workflow overview-workflow log for IDOCS. Using object key i know how to go to log.Users need that functionality to be enabled for Idocs.For po and pr I can see so its not parameter settings.I feel its configuration somewhere I dont know where?
Can someone help?
Thanks in advance..

Hi VJ,
I'm facing the same issue, the workflow overview is not displaying the log from ME52N. But i have delegate my business object. Is there anything need to be done further.
Thanks & Regards,
Tina

ADA 508 Compliance Workflow Overview (tab key for navigation / WebAim Toolbar)

Hi,
I've been assigned to update interactive training for a State agency..... with of course, an emphasis on ADA / 508 compliance.
So, before I pinpoint my two questions/scenarios, here is a basic, initial attempt at providing an overview of ADA compliance workflow in Captivate and beyond.
PS - useful Captivate forum urls are at the end of this post. I'm using Captivate v.6
ADA Compliance Workflow Overview:
1. All assets need an alt tag and conceivably a description > highlight the asset, like a pic, and click the Accessibility button under Properties.
2. Create slide notes for each slide > load slide, highlight no assets and click the Accessibility tab under Properties. Copy and paste your notes > for screen readers.
3. Need closed captioning for video/audio content > I use Camtasia for CC and will use the JW player for screen reader of video content.
4. Interactivity needs to be accessible via the tab and enter keys.
What else am I missing?
Question 1
My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am gettining the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
I'm opting not to use the playback control skin, only my Flash nav bar.
Question 2 (Scenario 2)
I have downloaded the WebAim Toolbar feature designed for FireFox, used to check ADA compliance issues.
I am getting this error message:
A frame does not have a title attribute or value. Okay... I bet I can fix this via the .html file or via the standard.js file??
and these warnings:
Alert: Javascript in head - A javascript element is present in the page head section.
Alert: Flash - A Flash object is present.
Does anyone know if these alerts are worth fixing?
Obviously Captivate is going to pump out, or rather publish... javascript elements, but is this bad in the page head section?
And..... of course a Flash object is present...Captivate produces Flash / Shockwave files.
I'll obviously ask the programmers at WebAim for guidance as well. As always any help would be appreciated and Tanks in advance.
http://forums.adobe.com/message/117985#117985
http://gneil.blogspot.com/2008/09/target-6-million-settlement-is-your.html
http://kb2.adobe.com/cps/403/kb403160.html
http://forums.adobe.com/message/3515968#3515968
Screen grabs are attached.
Thanks, Calif Dreamin'

Hi,
Attached is my zipped project file. I did create my own buttons in Flash - this might be the problem. I have only been problem solving with navigation on the first four slides.
To clarify, hitting the Enter key does engage navigation, however I’m having difficulty controlling the navigation so that it goes to the correct location.
I’m using Captivate v.6 / publishing SCORM 1.2 / Using IE to deliver via the SyberWorks LMS.
Here is question 1:
Question 1
My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am getting the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
I'm opting not to use the playback control skin, only my Flash nav bar.
Thanks for reaching out!!
Thanks,
Bill Farrell (aka Calif Dreamin’)

Standard BAPI or Function Module for FB01posting

Hi Experts,
My requirement is as follows.
Invoice details would be sent across from Middleware to SAP and for which I have developed a Custom Remote Enabled Function Module. The Function Module needs to post the data using FB01 Transaction.
I had planned for recording a BDC for FB01 and post the data, however, we are on the verge of getting upgraded from 4.7 to ECC 6.0. To avoid problems that we might face for change of screens in ECC 6.0, I would prefer using a BAPI or Function Module for FB01 posting, if available, instead of BDC.
Data coming from Middleware are as follows.
HEADER:
BKPF-BLDAT : Document Date
BKPF-BUDAT : Posting Date
BKPF-XBLNR: Reference (Invoice#)
BKPF-BLART : Document Type
BKPF-BUKRS : Company Code
BKPF-BKTXT : DocHeader Text
BKPF-WAERS : Currency
LINE ITEM:
BSEG-LIFNR : Vendor no
BSEG-WRBTR - Total amt -Debit/Credit -Vendor
BSEG-ZUONR : Assignment field
BSEG-EMPFB : Alternative Payee
BSEG-UZAWE : Payment Method Supplement
BSEG-ZTERM : Pmt terms
BSEG-KOSTL : Costcenter
BSEG-HKONT : GL AccountNumber
BSEG-WRBTR : Amount for GL
BSEG-SGTXT : Line item text
The Vendor Line Item would be one where as GL line items could me more than one.
Can any of you suggest me a standard BAPI or Func Mod?
Points will be awarded for valuable inputs.
Thanks to all!!!!

You can use RFBIBL00 program for FB01 postings. Go through the program help on how to use this program.
This program requires a file to be on application server in a certain format.
You may also refer the program RFBIBLT0 on how the file format should be.
Hope this helps.
Thanks,
SKJ

BAPI or Function Module for F-22

Hi I am working on one scenario. I am clearing the document using F-30 transaction in one company code and Posting the same document in other company code using F-22. I need to know whether it posts successfully or not using F-22 before I clear the document so that I can stop this from clearing. I can not do this simply using the BDC. Here I need a BAPI or function module to have a check whether it will post successfully or not using F-22 before I clear the document using F-30.
Please help me to find the right BAPI or Function Module here.
Thanks,
Ravi.

Hi Eswar,
BAPI_ACC_DOCUMENT_POST works only for 2 line postings. But we can make it work for one line by implementing BTERWBAPI01.
Here you will be passing ACCHD-GLVOR = RFST
ACCIT-BSTAT = S
ACCIT-BSCHL = 39
ACCIT-UMSKZ = F
ACCIT-ZUMSK = Z
could you please share the code that you have implemented in BTE?
please share the sample code that you have done for BAPI.Because I also have the same requirement for f-47.
Regards,
xavier.P

BAPI functions for file upload

Hi All,
can anyone tell me Bapi functions for the file or image upload using?
With best regards,
Suneetha

Hi,
Uploading LOGO in SAP
http://www.sap-img.com/ts001.htm
Upload graphics on
The program RSTXLDMC can be used to upload graphics (file extension .tif on PC files) into individual standard text.
<b>ws_upload</b>
Transfer files from the frontend to the application server.
Rgds,
Prakash

Bapi Or Function Module for Updating a table

Can u Plz let me know , is there any bapi or function module to update few fields of a standard table using an internable.

Hi Shiva Kumar Tirumalasetty ,
There is no FM / BAPI to update directly to any SAP tables . SAP won't suggests to develop a FM/BAPI like that , as it will cause some data inconsistency problem .
We have to search and find BAPI's/ FM's for requirement specific if not exists then need to think about the alternate options (LSMW/ BDC etc..)
Hope this answers your question.
Thanks,
Greetson

Need BAPI or function module to do FMZ1 transaction for funds commitment.

Hi,
I need a BAPI or function module to do FMZ1 transaction, please advise.
Regards
Fellow ABAPer.

I think I found it.
If anyone is searching for it too, we will use these one:
CO_ZA_AVAIL_CHK_ORDER_MULTI

BAPI or function for FB03 workflow overview

Similar Messages

Maybe you are looking for