BAPI to change components data of planned orders?

Hi,
Currently we are using BDC to change components at planned orders.
Due to big data volume, we have performance issue now. Just checked
if there is any BAPI to replace BDC. But can't find proper one. Anyone has
any expeerience about changing components at planned order?
Thanks.
B. Regards,
Nancy

Hi,
It's planned order due to biz requirement.
B. Regards,
Nancy

Similar Messages

Change component quantity in planned order

Hi,
Is there any FM or BAPI for changing component quantity in planned order?
Regards,
Archna
Edited by: Archna Raja on Sep 22, 2010 12:17 PM

Hi Srinivas,
I assume, you try to change Manfacturing Order ( Like Process Order, Planned Order etc). If so, the mentioned bapis will work perfectly. However, you have to send right data to bapi BAPI_MOSRVAPS_SAVEMULTI3. Send to bapi,only what is needed, because if there is any mis-match,system will not update the order.
Few insights from my side are,
1) Check "ORDER_TYPE" Input Parameter.
- 5 Planned Order
- 6 Production Order
2) Fill Only ORDID, ORDER_NUMBER and MASTER_ORDER_QUANTITY in the structure ORDER_HEAD.
3) Also, fill the same in the structure ORDER_HEAD_X. Put 'X' only for MASTER_ORDER_QUANTITY.
Hope this will help you.
Thank you,
Santosh KB.

How to change the components of the planned order? (FM or BAPI)

I need to change the storage(LGORT) in the components.
I found only MD_PLDORD_CHANGE_COMP_ITEMS, but could not get the correct result.
Has anyone used this FM to change the components of the planned order?
Can you please tell how to use it. Or advise an alternative solution.

Hi Anton,
There's a BAPI to change planned orders - BAPI_PLANNEDORDER_CHANGE, but it allows to change only header data.
Therefore you'll have to go a bit longer, and use a couple of other BAPIs:
First read the order that you want to change - BAPI_PLANNEDORDER_GET_DETAIL
Second, create a new planned order with the changed data, based on the read planned order - BAPI_PLANNEDORDER_CREATE.
Third, delete the old planned order - BAPI_PLANNEDORDER_DELETE.
Regards,
Mario

FM or BAPI to change Operation data

Hi,
Is there any BAPI to change operation data? BAPI_ALM_ORDER_MAINTAIN is not useful in my case. I want to use IBAPI_ORDER_OPERATION_CHANGE but not able to get proper documentation for same.Can anyone give me a sample code about how to use IBAPI_ORDER_OPERATION_CHANGE?
My requirement is to tick check box 'Required Splitting' in operation if some conditions are met. I am planning to do this using cuatomer exit. Everything is working fine only i need to know how to use above BAPI. If this doesn't work then as a last option i will go with BDC.
Regards,
Kamal

Hi Kamal,
Unfortunately I can not see any BAPI which changes operation data of a production order.
BAPI_PRODORD_CHANGE is available only for changing header details.
BAPI_ALM_ORDER_MAINTAIN and IBAPI_ORDER_OPERATION_CHANGE are used for changing maintenance or service orders, and not production orders, most probablty this won't work or cause issues.
I'm afraid BDC is the only option in this case.
Regards,
Marcelo Pacheco

Pegging relation for stock got lost once we do changes to the SNP planned order.

Hello Experts,
Pegging relation for stock got lost once we do changes to the SNP planned order.
We are using a BAPI "BAPI_MOSRVAPS_CREATESNPORDER" to make changes to the planned order as per our business requirement.
However after changes the pegging relation got lost.
Please help, why and how to solve this.

Dear Krish,
While creating orders using BAPI pegging relationship will be lost.
Could you be more clear which orders you are creating?
Some times dynamic pegging is possible.
Regarding pegging relationship please check the link, it may help you.
Pegging - SAP Library

A Query for shortfall quantitiy of components in a Planned Order

Hello,
I'm trying to create a query to report committed quantity, required quantity and shortfall quantity of components for a planned order related to a WBS.
When I run MDVP for a specific planned order I see values in FLMNG field.
But when I check the reservation of that planned order in RESB table FLMNG table is empty while other fields for required quantity and committed quantity are filled.
So I ran ST05 for MDVP and figured out that system is using a table called RESVDB( I cannot remember the exact table name) but result the is same.
Does system fill the FLMNG field only in the structure of MDVP with substraction of committed and required quantities and never updates it in reservation tables? If it does update tables where can I find this field?
And also, to get the same result with MDVP, is using these fields in RESVDB the right way?
Thanks,
Arda

Hello Arda
The system design is explained on the following note:
423538 - MDVP: Missing part list in collective availability check
The following information is provided on this note:
For dependent requirements of a planned order, the system generally updates no
missing part indicators using the availability check in the corresponding
dependent requirements record of table RESB. SAP does not plan to implement
changes in the system design of the R/3 standard system that allow processing
the missing part indicator from the availability check.
BR
Caetano

Function Or BAPI to Change BP Data

Hi All
We need to change the value of a field Classification of the BP after we create a Quotation, but we are not able to find the function to do it.
Best Regards.

Hi Kamal,
Unfortunately I can not see any BAPI which changes operation data of a production order.
BAPI_PRODORD_CHANGE is available only for changing header details.
BAPI_ALM_ORDER_MAINTAIN and IBAPI_ORDER_OPERATION_CHANGE are used for changing maintenance or service orders, and not production orders, most probablty this won't work or cause issues.
I'm afraid BDC is the only option in this case.
Regards,
Marcelo Pacheco

Req. delivery date and plan order finish date relationship

Dear Experts,
I have a question on setting the req. delivery date and plan order finish date relationship. Now, I want the plan order finish date is one day before the req. delivery date, is it possible to set it in configuration? Please advised! Many thanks!
Regards,
Matt Yim

Matt,
Please use a schedule margin key(SMK) in the material master MPR2 view which has float after production defined as 1day.
If there are no SMK with that defination then you can define you own in customisation and assign the same in the material master. (SPRO--->Production ->MRP->Planning ->Scheduling and Capacity Parameters->Define Floats).
Regards,
Prasobh

BAPI for changing components of a item in purchase order

Hi All,
I am working in VMS. In that i deal with Assembly purchase orders. There will be only one line item for such type PO's and there can be any number of components for that item.
Now from the module pool screen i need to update the batch details of the components. I could not find any BAPI which suits my requirement. Which can change the components of a puchase order.
Thanks in advance.
Sanjay Gandhi.
Ta

Hello,
I would also like to create purchase order with article components (DB view MDSB, table RESB) and can not find any BAPI or FM with component interface. I'm using BAPI_PO_CREATE1 for creating PO, but ther is no interface for components.
Thank You in advance for help.
J.
EDIT: We are using version 4.6C...
Edited by: Jana Bittnerova on Jan 23, 2008 9:28 AM

BAPI or FM for scheduling a planned order (like MD11 or MD12)

Hi guys.
We are working with a group of materials and planned orders, in order to modify and create new planned orders depending on the stock per each material. So we use MD12 to 1) modify the quantity in the order, and MD11 to create new planned orders for the rest of stock for this material.
For process of creation we don't have problems (BAPI_PLANNEDORDER_CREATE makes its work well ), but when we want to schedule the new planned order created before via FM or BAPI, we cannot see any results in MD12.
I mean, when a planned order is scheduled via menu button, a new tabstrip appears in the transaction with dates. So this similar action we've tried using CX_PLANNED_ORDER_SCHEDULE or CX_CRP_PLANNED_ORDER_SCHEDULE but there was no change. If we execute the Schedule button action, in table PLAF (master of planned orders) apears a new number in field PLAF-BEDID related to MRP.
So guys, could you please help us how to get this issue? As last option is BDC, but BDC's and me are not good friends because its performance. So please, any suggestions?
Thanks in advance!
Raul Romero

Hi guys...
Sorry for the long time without an answer, which I'm sharing you now:
1. In order to perform the proccess of scheduling, you have to record the steps from menu bar in your batch input. I mean: (1) set values into fields CRHARBPL-LOW () and CRHWERKS-LOW
PERFORM set_batch USING: 'X' 'RCCRY000' '1000',
                                  space 'BDC_CURSOR' 'CRHARBPL-LOW',
                                  space 'BDC_OKCODE' '=PLNG',
                                  space 'CRHARBPL-LOW' p_arbpl,
                                  space 'CRHWERKS-LOW' 'PR01'.
(2) After you ordered your list of planned orders or production orders, loop your internal table and per each order record these commands (these simulates the popup option to select the order you want for scheduling and mark it in the dynpro you are processing):
LOOP AT gtd_tabofplan INTO gvc_tabofplan.
    PERFORM completa_bi_campos USING: 'X' 'SAPLPLAT' '4000',
                                    space 'BDC_OKCODE' '=Z021'.
    PERFORM completa_bi_campos USING: 'X' 'SAPLCY19' '0120',
                            space 'BDC_CURSOR' 'CYMARK-VALUE(02)',
                            space 'BDC_OKCODE' '=BACK',
                            space 'CYMARK-VALUE(02)' gvc_tabofplan,
                            space 'CYMARK-MARK(01)' space,
                            space 'CYMARK-MARK(02)' 'X'.
    PERFORM completa_bi_campos USING: 'X' 'SAPLPLAT' '4000',
                            space 'BDC_OKCODE' '=SL25'.
ENDLOOP.
(3) Set the SAVE operation.
PERFORM completa_bi_campos USING: 'X' 'SAPLPLAT' '4000',
                          space 'BDC_OKCODE' '=SAVE'.
Hope you' ve succeeded in this task, let me know if you've another questions.

Change Receipt Quantity for Planned Order in LiveCache

Hi Experts,
I am very new to SAP APO and I am an ABAPer. We have got a requirement to update receipt quantity in /SAPAPO/PPT1 transaction based on some conditions. I have looked into FM BAPI_MOSRVAPS_GETLIST2 to fetch receipt data under OUTPUT_NODES, but FM BAPI_MOSRVAPS_SAVEMULTI3 is not helping me with receipt data update. I have even checked several other options, but in vain. I have tried implementing several BAdIs also, still no luck.
Can anybody suggest if we have any way to do this? Your help is highly appreciated.

Hi Srinivas,
I assume, you try to change Manfacturing Order ( Like Process Order, Planned Order etc). If so, the mentioned bapis will work perfectly. However, you have to send right data to bapi BAPI_MOSRVAPS_SAVEMULTI3. Send to bapi,only what is needed, because if there is any mis-match,system will not update the order.
Few insights from my side are,
1) Check "ORDER_TYPE" Input Parameter.
- 5 Planned Order
- 6 Production Order
2) Fill Only ORDID, ORDER_NUMBER and MASTER_ORDER_QUANTITY in the structure ORDER_HEAD.
3) Also, fill the same in the structure ORDER_HEAD_X. Put 'X' only for MASTER_ORDER_QUANTITY.
Hope this will help you.
Thank you,
Santosh KB.

Bapi for update Master Data in Production order

Dear All ,
I am working in a car manufacturing company here production order is made month wise planning qty , but every day its Bom is get changed by Autocad/PLM interface and all changes are being recorded through ECN .
I have to generate daily reservation for assemblies for a perticular finish vehical ,so I need to update the Masterdata in production order no through the PLM( VB platform) interface .
So please suggest me any BAPI so that I can update the master data regular basis in monthly production order or if you have any better way to map this process into SAP please suggest .
Thanks in advance .
regards ,
Pralay ..

Not sure what master data in production order you want to change. Anyway if it is at header level, then evaluate BAPI - BAPI_PRODORD_CHANGE.
Alternatively evaluate the usage of Order Change Management if it is feasible in your solution. Do a search in this forum you will find many threads on it, also read SAP help & do a test a test in your sandbox. If you face a specific issue then do revert

Bapi for sfg dependent dem,snp planned order qty, and ppds planned orde qty

Hi Gurus,
I am not much familiar with APO, so please help me,
Input details:
Field                         Value
Planning Version     000
Source Location *     1001     Single/Multi Value
Product *                          1000061     Single/Multi Value
Production Planner *     PRC     Single/Multi Value
Start Date *
End Date *
o/p:
Source Location     Date     Semi-Finished Material     Material Description     SFG Dependent Demand     SNP Planned Orders qty     PPDS Planned order Qty     Total SFG Variance due to Lot size     Total SFG Variance reference to dependent demand
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT     340     412     420     8     80
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT
1001     15-Jul-10     1000041PP     PRIMARY FF MILK 3% FAT
Is there any bapi to fetch the data as shown in o/p.
Thanks

Hi Phani,
Tryout the below BAPIs
IF10503 (object)
BUS10503
Regards
R. Senthil Mareeswaran.

Change delivery date on sales order -- change of Billing date on item

Hi,
We are trying to change a delivery date for a sales order's item, if we do so normally the billing date on that item's billing tab will change automatically also.
Now, for a specific sales order the billing date in the billing tab is not changing.
We compared 2 sales orders .. the same statusses - no blocks - ... and with one it works (changing of the billing date) and with the other it does not work..
Please help !
thanks a lot!

Hi,
Check the following.
If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date.
If you are billing services, the system proposes the date of services rendered. You can change the date manually in the sales document.
If you are using a billing plan to bill a project, the system can propose billing dates for the billing plan on the basis of planned or actual dates in the corresponding milestone.
In a billing plan for a maintenance or rental contract, you can specify rules by which the system determines billing dates on the basis of other dates in the contract.
Regards
Nadarajah Pratheb

How to change operation dates in Production Order /Capacity Leveling

Dear Experts ,
We are using ECC 5.0 .In production order , scheduling happing as Backward based on the Sales Order Delivery Date .I am doing the following :
1.Demand as Sales Order with Delievery date : 20.03.2010
2.Running MRP with Lead Time Scheduling -2 in md02 and converting the Planned Order to Production Order .
4.Production Order have following dates :
         Basic Finsish Date : 21.03.2010
         Basic Start : the day Pl.Or--Pr.Ord
         Schedule Start : 15.03.2010
         Schedule Finsish : 17.03.2010
        Schedule Release : 13.03.2010
5.In schedueling margin key : Float Before Production : 3    , FAP : 3 , Release Period : 2
6.In material master : Work Scheduling View : Setup : 3 days , Processing : 4 ,Interoperation : 2 for one Base Qty 1
7.In operation : Op1 : Start Date : 15.03.2010    Finish Date: 15.03.2010
                         Op2 : Start Date : 16.03.2010      Finish Date : 17.03.2010
                         Op2 : Start Date : 17.03.2010      FD : 17.03.2010
Question :
1.How to change the Operation dates in Production Order Operation over view screen ? Today, operation over view screen , Start date and Finsih Date of individual operation are not changable with in Production Basic Start /BF date or beyond .It is only changing based on the Standard Value : Labor
2.How to change/re-schedule operation dates d in CM21 (Graphical view -Work Center Capacity load as per   Production Order and Operation combination ) based on capacity availale in advance dates? I am using Time Profile : SAPSFCZ002 -SFC Graph midterm-3 motnhs and Planning ,
How to solve this above issue in scheduling operation and capacity distribution .
Regards
JH

Closing the thread

BAPI to change components data of planned orders?

Similar Messages

Maybe you are looking for