How to create network activity

how to create network activity using bapi_network_maintain bapi
i am getting the error as incorrect object key for activity
reagrds

ok

Similar Messages

  • How to create an activity using business partner of document flow

    hi guys,
    Can anybody help me how to create an activity by using the business partner of document flow.
    i am using the function module BAPI_ACTIVITYCRM_CREATEMULTI but it was giving some sort of error in level based.
    so if anybody used above type of scenario can help me out. if you have an sample code please post it which is very much usefull..
    thnaks
    viswam

    Hi Viswa,
    I used this function module to create activity with the doc flow in my case successfully.
    CALL FUNCTION 'CRMXIF_ORDER_SAVE'
        EXPORTING
          data   = lt_contract
        IMPORTING
          return = lt_return.
    Regards
    Andy

  • How to create an activity when system finds duplicate record!!

    Hi CRM Experts,
    I am working on CRM 5.0. We are uploading contact details to CRM through ELM.
    Here My queries are:
    1) How to create An Activity when system finds duplicate record?
    2) By using ELM we can create BP with Activities and BP with Leads. But Here, my scenario is we have to Create BP with leads and Acivities. can any one help me on these areas?
    Thank in Advance.
    Sree

    Hi Sree,
    I can help you with your first query.
    When the system finds a duplicate record then either the system stops working further or proceeds with the error free record.
    So once the duplicate entry is found only the first record will be considered and not the second or the duplicate record.
    Regards,
    Rekha Dadwal
    Kindly reward with points if usefull !!!!

  • How to make cost element field appear when create network activity service

    Hi All,
    Please help. We create a project ,wbs and network activity using external service. How can we make appear the cost element when the service master appear. The system require cost element but we cannot see the cost element field.
    Steps :
    *. CJ20n.
    *. Create WBS and network header
    *. Then network activity for external service.
    *. Then it appears service specifications : ext specs Task List Maintain
    *. I Put Service no, and the error message appears :
    Please enter a cost element
    Message no. SE121
    *. But we can find where the cost element is. It seems the field disappear.
    PLease help.
    Thank you.
    Nies

    Hi,
    Yes. It is already blank. But the cost element field still not appears when we create activity service. It shows :
    Please specify a valid account assignment
    Message no. SE181
    Diagnosis
    You have entered an account assignment category in the document item for which an account assignment is mandatory.
    All account assignment lines in the service specifications either have been deleted or are inactive (e.g. account assignment lines of a contingency item).
    Procedure
    Please enter an account assignment for the services or value limits.
    The entry of an account assignment is unnecessary if you choose "unknown account assignment" in the document item.

  • How to create network teaming or channel bond

    hi
    how to create bond0 and bon1 for RAC installation between two nodes??
    node1
    [grid1@rac-1 ~]$ /sbin/ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:00:E8:F7:02:B0 
              inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::200:e8ff:fef7:2b0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:20571 errors:0 dropped:0 overruns:0 frame:0
              TX packets:19190 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:10508240 (10.0 MiB)  TX bytes:9218545 (8.7 MiB)
              Interrupt:177 Base address:0x8400
    eth1      Link encap:Ethernet  HWaddr 00:26:18:59:EE:49 
              inet addr:192.168.181.10  Bcast:192.168.181.63  Mask:255.255.255.192
              inet6 addr: fe80::226:18ff:fe59:ee49/64 Scope:Link
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:49 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:23
              collisions:0 txqueuelen:1000
              RX bytes:18391 (17.9 KiB)  TX bytes:0 (0.0 b)
              Memory:fe9c0000-fea00000
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:16332 errors:0 dropped:0 overruns:0 frame:0
              TX packets:16332 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:16738217 (15.9 MiB)  TX bytes:16738217 (15.9 MiB)
    virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:10062 (9.8 KiB)
    [grid1@rac-1 ~]$ node2
    [root@rac-2 ~]# ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:1D:72:39:3A:E4 
              inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::21d:72ff:fe39:3ae4/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:6765 errors:0 dropped:0 overruns:0 frame:0
              TX packets:7040 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:3922791 (3.7 MiB)  TX bytes:1079834 (1.0 MiB)
              Interrupt:169
    eth2      Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
              inet addr:192.168.181.20  Bcast:192.168.181.63  Mask:255.255.255.192
              inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:7029 (6.8 KiB)
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4970 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4970 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:7648305 (7.2 MiB)  TX bytes:7648305 (7.2 MiB)
    virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:10706 (10.4 KiB)
    [root@rac-2 ~]# ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:1D:72:39:3A:E4 
              inet addr:192.168.1.3  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::21d:72ff:fe39:3ae4/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:6767 errors:0 dropped:0 overruns:0 frame:0
              TX packets:7044 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:3923027 (3.7 MiB)  TX bytes:1080210 (1.0 MiB)
              Interrupt:169
    eth2      Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
              inet addr:192.168.181.20  Bcast:192.168.181.63  Mask:255.255.255.192
              inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:37 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:9982 (9.7 KiB)
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4970 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4970 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:7648305 (7.2 MiB)  TX bytes:7648305 (7.2 MiB)
    virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00 
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:10706 (10.4 KiB)
    [root@rac-2 ~]# i have done till now....
    Configure Network Bonding
    In /etc/modprobe.conf add line:
    alias bond0 bonding
    alias bond1 bonding
    options bonding miimon=100 mode=1 max-bonds=2
    (“mode=1? means active/passive failover… see “bonding.txt” in kernel sources for more options)
    /etc/sysconfig/network-scripts/ifcfg-bond0 looks like:
    DEVICE=bond0
    BOOTPROTO=none
    ONBOOT=yes
    NETWORK=192.168.181.10
    NETMASK=255.255.255.192
    IPADDR=192.168.181.20
    USERCTL=no
    /etc/sysconfig/network-scripts/ifcfg-eth0 looks like:
    DEVICE=eth0
    BOOTPROTO=none
    ONBOOT=yes
    MASTER=bond0
    SLAVE=yes
    USERCTL=yes1)what to do get my access to adsl modem?
    2)what to do on node2?
    i am facing some error when i am installing clusterware bcz the interface names are different in each node.and public and private ip NICs are in different order.
    will this bonding solute out this issue?
    regards
    Edited by: you on Apr 25, 2010 2:00 AM
    following the steps from here(but its done on vm-ware):
    http://blog.ronnyegner-consulting.de/2009/09/14/oracle-11g-release-2-install-guide-%E2%80%93-grid-infrastructure-installation/

    Why do you want to use bonding? If this is not a real RAC, what do you want to achieve by bonding?
    I do not see a dedicated Interconnect interface. Node 1 has NIC eth1 and node 2 has NIC eth2. One of the basics for RAC is to have the same configuration on each node. So if node 1 uses eth1 for public/virtual/private networking, then so should every other node in the cluster.
    If you bond eth0 and eth1, then what do you want to use for your Interconnect? The same bond0 interface that is now used for your RAC's public and virtual interface configuration?
    Make sure you understand the basic requirements for a RAC configuration. Make sure you adhere to these - even in a virtualised environment.

  • Run time Error while creating Network Activity.

    Getting Runtime -
    > Runtime error: ILLEGAL_TEMPORARY_OBJNR  ("TM0000000008NV" " " " ")
    While trying to create the Network activity in the following sequence.
    CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
    *--> Create the Network Activity
      CALL FUNCTION 'BAPI_BUS2002_ACT_CREATE_MULTI'
        EXPORTING
          i_number     = i_number
        TABLES
          it_activity  = t_activity
          et_return    = it_preturn.
         extensionin  = extensionin
         extensionout = extensionout.
      LOOP AT it_preturn INTO wa_preturn.
        IF wa_preturn-type EQ c_error OR
           wa_preturn-type EQ c_termination OR
           wa_preturn-type EQ c_exit.
          l_error = c_yes.
        ENDIF.
      ENDLOOP.
      IF l_error IS NOT INITIAL.
        ROLLBACK WORK. " satish 09/02/2008
        EXIT.
      ENDIF.
      CALL FUNCTION 'BAPI_BUS2002_SET_STATUS'
        EXPORTING
          number                   = i_number
          set_system_status        = 'CRTD'         " changed 'REL' to 'CRTD'  satish 11/04/2008
        IMPORTING
          return                   = lwa_ret1
        TABLES
          i_activity_system_status = lt_act_status_set
          e_result                 = lt_stat_ret.
      IF lwa_ret1-type EQ c_error OR
         lwa_ret1-type EQ c_termination OR
         lwa_ret1-type EQ c_exit.
             call function 'BAPI_TRANSACTION_ROLLBACK'.
        EXIT.
        endif.
      CALL FUNCTION 'BAPI_PS_PRECOMMIT'
        TABLES
          et_return = lt_return.
       CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    Help really appriciated.
    Thanks
    Mani

    Hi,
    Go through the SAP NOTES 777934
    Symptom
    When a new network activity is created using BAPI, BAPI_BUS2002_ACT_CREATE_MULTI and then the newly created activities are
    reverted by using BAPI BAPI_TRANSACTION_ROLLBACK,the control objects of newly created activities are not reverted, therefore when you perform a
    commit of the transaction by using BAPI_TRANSACTION_COMMIT, a short dump'ILLEGAL_TEMPORARY_OBJNR' occurs.
    Other terms
    short dump 'ILLEGAL_TEMPORARY_OBJNR', CKCOUEB, Costing Sheet, Posting Date, Overhead key, CK_F_CO_OBJECT_ALL_REFRESH, BAPI_PS_INITIALIZATION.
    Reason and Prerequisites
    This is caused by program error. This note references SPC 770601 and created for corrections to be included in support package.
    Solution
    Implement the source code corrections.
    Regards,
    Dwaraka.S

  • How to create an activity in CRM automaticly

    Hi
    I'm working in CRM 4.0 and try create an activity automatically when a BUPA_MAIN objects come from FI-CA.
    In the BDOC-flow I start an own developed FM to check if a new activity will be created, that's no problem but which FM/BAPI will I use to create the new activity and how to fill them?
    Thank for help//

    Hello Jan,
    To create a new Activity Document use BAPI BAPI_SLSTRANSACT_CREATEMULTI.
    To find out how to fill the parameters, create a documento directly in CRM and debug function module CRM_ORDER_MAINTAIN to see how you have to fill the parameters.
    Maybe there is an OSS note that explains how to use this BAPI.
    Regards,
    Mauricio

  • How to Create New Activity Type  for Assiged to work centre Costing in Acti

    Dear Sir,
    We have four activity type to assigned in workcentre Costing Activity. Details are as under
    AIRJET     2010     AIRJET
    DONIER     2010     DORNIER
    SULTEX     2010     SULTEX
    SULZER     2010     SULZER
    in addition one more loom is comming in our unit and require new activity type.
    How can i create new.
    Please guide.
    Thanks in advance
    Regards
    Ajit

    Dear ,
    To create new Activity Type  , you need to follow the below steps :
    KA01 - Create Primary Cost Element for the new activities type.
    KL01 - Create Activity Type tied to the primary cost element. 
    KP26 - Change Activity Type/Activity Price Planning - maintain the Variable price
    Assign the activity type to cost center using T code KP26.
    In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal Year as 20xx.
    Click on Overview tab on top and key in costing details in this screen.
    After performing this ,while creating the work center ,this combination of activity type & cost center should be assigned.
    At work centre level , you should have
    1.Create Standrad Value Key -OP19 and Formula Key in OP49.
    2.Create Formula Parameters in OP7B or u can use existing one to assing in the Standard Value Key
    3.In CR02-Assing the Standard value key in Basic Data  and select the Formula Key in Costing tab with cost centre assingement .Save
    Try and check
    Regards
    JH

  • How to see network activity

    What program do I open to see all my network activity such as programs sending/receiving data?
    Thanks
    Sean

    You could try "Network Utility" or "Activity Monitor." Both applications can be found in the utilities folder. Activity monitor shows you a graph of total network activity. Network utility shows total send/review/error packets.
    If you want to know what programs are using what ports. you might want to try "Little Snitch."
    if you want to look at the actual network packets, you would want a program like "MacSniffer" or "CocoaPacketAnalyzer".
    What are you trying to do or find out?

  • How to create Activenotes / Active Notes on pc

    I want to create and edit Activenotes / Active Notes on my pc. I do not possess Outlook.
    Unfortunately the Nokia PC Suite 7.1 does not offer such possibility (yet?).
    Since, as I understood, Activenotes would be regular simple HTML docs, I have tried this.
    However, HTML-files created with either VNU or OpenOffice cannot be read by the E71 (reported error: unrecognized fileformat).
    If the source of a Active Note created on the phone is studied it appears a XML document.
    XML-files created with either OpenOffice, and W3's Amaya are readible, however the content is not displayed.
    Anybody got any suggestions how to to create and edit Activenotes / Active Notes on my pc (without Outlook)?
    TIA
    Message Edited by tbnl on 13-Jan-2009 01:09 PM

    Is there data you want off the device?
    Post relates to: Treo 800w (Sprint)

  • How to create an activity bar in Form?

    Hi all:
    I am using Developer 6i with Oracle 9i.
    I have developed a form, the form consists different button thru which I am calling different packages for different tasks. When user click any button e.g. "Generate Over time" for the current month, the package executed and insert data into a temp table after processing. during the execution system does not show any thing, I want to add an activity bar which will show the percentage of work done and fill the text box with any color.
    How is it possible?
    Hassan

    Hi ,
    I assume something like a PJC which contains a progress bar object , developed in JDeveloper, would fulfill your requirement....!!!!
    Unfortunately....there is not such an object in Developer Forms....
    Regards,
    Simon

  • How to Create an activity based on business partner

    hi guys,
    Can any body help regarding the below scenario.
    1) Creation an business partner.
    2) create an acitvity based on business partner.
    3) Create an lead and opputunity based on business parter.
    What are the function modules should we used to create the above three steps consequently.
    I need the function module for creation of BP , ACTIVITY,
    LEAD,OPPURTUNITY.
    Regards
    Viswa Guntha

    Hi,
    For creating a business partner, use the FM
    BAPI_BUPA_CREATE_FROM_DATA.
    For creating lead, opportunities and activities, use the FM CRM_ORDER_MAINTAIN. You need to handle the tables of this FM accordingly to create different kinds of orders.
    You can do it so by handling the PROCESS_TYPE of CT_ORDERADM_H in the changing tables.
    Regards,
    Karthik.

  • How to standard network / activity and std wbs to operative project

    dear all,
    i want to include a standard network that has assignments to standard WBS elements. However, to assign std network from templete area i got dialog box (include standard nework) which contains:
    (You want to include a standard network that has assignments to standard WBS elements. However, the selected WBS element does not correspond to the standard WBS element.)
    in below the above message there are 2 button i.e.
    1. Copy Assignment
    2. Ignore Assignment
    in both the above button selection i am not able to bring assigned (std WBSe).
    After all my finding i am not able to bring activity assigned WBS elements. Kindly help and provide information to resolve the problum.
    saqib usman

    done

  • How to use BAPI_PROJECT_MAINTAIN to create network activities under WBS elements ?

    Hello ABAPers,
    I have been using BAPI_PROJECT_MAINTAIN to create Project and WBS elements and I have done them without any errors.
    Now I need help on how to create network activities.
    Can anyone share on how to pass data to I_NETWORK table and I_ACTIVITY table and a brief description on what they are ?
    Thanks in advance,
    Kiran

    Hi Kiran,
    Do the following steps
    1.pass the following to i_method_project
    method_project-refnumber = lv_refnum.
    method_project-objecttype = 'NETWORK-ACTIVITY'.
    method_project-method = 'UPDATE'.
    concatenate aufnr(network nr) vornr(activity) into method_project-objectkey.
    2.Into i_activity
    activity-network = aufnr.
    activity-activity = vornr.
    3.i_activity_update
    activity_update-network = 'X'.
    activity_update-activity = 'X'.
    It should work.If not let me know.
    Rgds,
    K.S.

  • How to set up meeting with sales employee & how to create activity in a emp

    Hi all,
    I have two scenarios to be configured for my client.
    1. Sales manager should be able to set up a meeting with his sales team in CRM. can any one give me a idea how we can configure it in SAP CRM & what is the transaction type (Business activity) to be used to setup meeting with employees.
    2. How to create an activity or task in employees calendar. where we configure calendar in SAP CRM, do we need to assign this calendar any where in order to create create activity for employees calendar.
    Please do let me know how to achieve the above scenarios.
    I got one more issue is that, I have created two transaction types (business activity types) 1 for transaction type for meeting with employee with category "meeting" in business activity and 2nd transaction type is for sending email to employees with category "email" in business activity. I have also assigned these transaction types to categories under sentings for activities ->assign transaction types to categories in SPRO. But I am not finding these two transaction types on UI under activities. If use different category for these transaction types like appointment then these are available on UI for activities. Please suggest me how to fix this issue too.
    Thanks in advance
    JM

    Hi JM,
    1. It depends how you want to configure this and your detailed requirements. One way would be to create an activity of type Appointment and from this, create a CRM E-mail activity that sends an e-mail to all the Attendees in order to setup the meeting.
    2. Synchronizing Activities/Tasks is done with the Groupware Integration. I'm sure you can find some documents in SDN for it, but for now you can take a look at the IMG node (Customer Relationship Management->CRM Middleware and Related Components->Groupware Integration) and the help.sap.com (http://help.sap.com/saphelp_crm70/helpdata/EN/47/09e1c4cc8d4861e10000000a155369/frameset.htm) page.
    The "New" button in the standard Activities Search will load everything under the "screen kind" ALLS, which means all Activities with Activity Class Appointment, Task, E-mail and Sales Call. You can see this in the method CL_CRM_UIU_BT_ACT_CUST_GET=>GET_ACT_CLASS_FOR_SCREEN_KIND. It is pure UI logic that you can influence if you make modifications or enhance the Appointment UI (for example the component BT126S_APPT, by changing the screen kind passed). You'd need to debug a little bit to understand the logic, however.
    Hope this helps,
    Kind regards,
    YZ

Maybe you are looking for

  • Mail-form from dB Masters + reCaptcha - Things wont work the way i want.

    I used a mail-form from dB Masters because someone here gave me the tip. And its great! But it uses a simplefied Captcha script. I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php If you try to send mail it

  • How to call class

    How would I call the following method from another class? [\code] public void updateData(GeometryUpdater updater) TankData tankData = (Database.getMasterData()).getTankData(); double tankLength = tankData.getLength(); double tankWidth = tankData.getW

  • Function Module in Generic DataSources in BI

    Hi, I appreciate your answer about the Function Module in Generic DataSources in BI. These are the steps I followd on R/3 side. 1) Create a structure with the R/3 table fileds based on the requirement. 2) Create a function module by copying RSAX (Fun

  • My daughters Ipod shows iPod is Disabled connect to itunes. But I cannot reset and get the ipod to respond

    looks like my daughter locked herself out and I cannot unlock or get in..

  • Texture not showing properly.

    So I made a "screen" (see picture) in video copilot's element 3d. But when I gave it my texture (composition I pre-composed) it didnt show up right (see picture) How it supposed to look ^ How it is looking now^ As you can see the whole sentence and t