BAPI to get Planned orders from SNP,PPDS in APO

Hi Sap Gurus,
i want to find out a BAPI to fetch the planned orders from SNP,PPDS in APO BY PASSING THE parameters like Resource id ,Start time and End time.

hi,
check out this , if u find any new BAPI , just add to this list.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/scm/apo-technical
regards
Prabhu

Similar Messages

Release Planned Orders from SNP to R/3

Hello Experts:
I have a business request to release the Production Planned KF from SNP into a frozen MPS (or even an inactive fcst version) in R/3. Since we have only released a forecast from the DP side to R/3 in the past, can anyone tell me the best practice to release from SNP to R/3? Do I need to create an info cube to perform the release?
The business runs a Heuristic in SNP at the finished good level and the makes modifications and would like to release this to be used in the R/3 MRP run for some groups of materials, as opposed to releasing the forecast for MRP to run on.
Currently, I can send the data from SNP Production Planned KF to a time series KF in DP and release to MD63 from there, but they would like to release directly from SNP in the future.
Any suggestions are greatly appreciated!
Andrea

Hi Andrea,
If you want to release SNP planning data to ECC, you need to make following settings.
In customizing
Maintain Distribution definitions
Maintain Settings in Configure transfer to OLTP system in SNP customizing-Global Settings.
If you maintain periodic setting in SNP setting, you need to run transaction /SAPAPO/C5 to transfer data.
As well as u can do this also :
1) You need to create a release profile using transaction /sapapo/mc8s
2) In release profile, you need to maintain planning area, key figure to
be transformed, plg version, category, etc.,
3) Once it is created, using transaction /sapapo/mc8t, maintain the
R/3 transfer steps
4) Then create a planning job in background using transaction
/sapapo/mc8d

Error:conversion of PPDS order from SNP order-error /sapapo/rrp_heur45

Hi,
I am converting a snp planned order from ppds order in transaction /sapapo/rrp_sap2ppds and using heuristic sap_pp_002.But it is canceling the heuristic and giving above error message.I have given 60days ppds horizon and 61days snp horizon.lot size:lot-for-lot.Please suggest what to do?
Thanks&regards
venkadesh

Hello ,
The hueristics sap_pp_002 you are using is based on algorithm "planning of std. lots".
For converting Supply Network Planning (SNP) orders or Capable-to-Match(CTM) orders into Production Planning and Detailed Scheduling (PP/DS) orders, try to use a heuristic based on the algorithm /SAPAPO/HEU_SNP_CONVERT, such as the standard heuristic SAP_SNP_SNGL..
I think the above mentioned hueristics should be able to solve the problem .
Also for more information refer to below link.
http://help.sap.com/saphelp_scm2007/helpdata/en/8a/475c3c3906b106e10000000a11402f/frameset.htm
Thanks & Regards
Abhijit S Nakhwa

Does Make To Order planning consider any SNP/PPDS Horizons

Guys
Does Make To Order planning consider any SNP/PPDS Horizons unike the Make to Stock scenario planning?
Thanks

Thanks for the response guys.
In RRP3 view, when I look at the Individual project segment demand, I do not see any SNP/PPDS Horizons. However, when I see the demands under the MTS segment, I can see the SNP/PPDS Horizons.
In MTS scenario, I understand that only those orders that falls within PPDS horizon are picked up by PPDS planning and orders outisde SNP horizon are picked up by SNP planning.
However, as MTO is purely PPDS planning, I am just wondering whether SNP or PPDS horizon comes into the picture in this scenario or not.
Further more, my primary concern in MTO scenario is, if PPDS horizon is taken into the picture ( which is usually in the near visible term and < SNP horizon, say 15 days), and as PPDS planning doesn't pick the demand in the MTO segment until the demand falls with in this horizon, aren't we not leveraging the full functionality of procurement planning, as PPDS plans the demand by picking it just before 15 days (in this example) of the original requirement date, and the company might not be able to fulfil the customer order as the replenishment time might be long for this particular product being procured/produced.
So, I am basically leaning towards an understanding that what ever demand that falls in the Individual Customer/Project segment (MTO), it will be picked up PPDS planning regard less of SNP/PPDS horizons.
Please advice, if my understanding is wrong and I would appreciate if you quote some examples which might help me better understand the scenario.
Thanks

BAPI to change planned orders details

Hi Experts,
I need BAPI to change Planned order details,which are created through SNP PPM's.I searched for Bapi and got one 'BAPI_MOSRVAPS_SAVEMULTI3' but this BAPI will change order details if created for PP/DS PPM's.
Kindly suggest will this BAPI only work or someother.
I want to keep the PPM name blank and save the order details through BAPI.
Pls reply asap.
Thanks
surbhi

Hi Surbhi,
You may please search on google, there are lots of tutorial on BDC, you will surely get the solution... in short BDC is to record a transaction & then use same recording to generate ABAP program & you can play with screen navigations & update the fields you required...
Regards,
Adarsh

Block individual planned orders from CIF

Hello All,
I would like to know if there is a way to exclude individual planned orders from CIF transfer from R/3 to APO?
Thanks and Regards

Hi Gabriella,
It would not make sense to modify the standard way of working of SAP APO only for 2 months.
If you use any kind of enhancements, etc, you would need to later on remove it or deactivate it.
Best option would be to make adjustments in your forecast so that SNP could plan additionally for this temporary demand. Otherwise create dummy sales orders in R/3 which would inflate the demand. But this would be feasible, only if you DON'T automatically confirm the Sales orders for delivery in some way, or if you could think of some way in which these Sales Orders do not get processed further in some way.
Or, as you yourself mentioned, increase the safety stock temporarily, and later on (may be after 2 months), reduce it to the normal value. But especially closer to end of 2 month period, someone would need to manually adjust planned or production orders in R/3 to have data sanity. Similarly, action would be needed in APO also to have data in sync with R/3.
You could have created the planned orders directly in R/3 and sent them across to APO, but this would increase the receipt situation, so SNP would then start planning for lower "net demand".
PS: In such scenarios where business needs something temporarily and which can't fit in the standard process, it is best that we convince them to have some workarounds which might not really sound like businesswise wise (in this case creating additional forecast).
Thanks - Pawan

Releasing Sales Orders from SNP to DP at correct levels

We have a requirement where we want to do month to date tracking of sales orders in DP compared with the forecast. We have three important characteristics in DP at which we want the data to be released - Product, Location and Customer. Is there a way to release Sales Order data from SNP to DP at such a detailed level ? A product at a location could have sales orders from multiple customers.

why would you want to send Sales Orders from SNP to DP
Why not load it into DP planning area through a cube in the DW workbench directly
As far as i know you can only trasfer from SNP to DP in Product Location (or similar characterstic Level)
DP to SNP demand transfer can use descriptive characteristics but dont think you can do it in reverse

Locating Planned order from a purchase requisition

Hi Gurus ,
A purchase requisition has been created manually , by converting a planned order . Is it possible to find out the planned order , from a purchase requisition Pls advise.

Hi
Once planned order converted in to Production order or Purchase requisition, we can't see any details of the planned order.Planned orders are stored dynamically in tables.once it is coverted,Details can not be seen even in PLAF-Plan order table.
In production order, you can see the planned order number but for PR , it is difficult to get the reference Plan order number.
Regards
Ramakrishna

Migration of Planned Orders from one SAP system to another one

Hi,
A quick help needed.
We are migrating SAP data from one SAP system to other due to business split. Regarding PP data, can Planned orders be migrated as it is from one SAP System to another? What is the impact if we do so?
Appreciate your response.
Kind Regards,
tanuji

hi ,
As suggested , you can propose to migrate only Firmed Planned orders from SAP to SAP system .
How to acheive it ?
You can use below BAPI to extract details of planned order from Table PLAF and upload in TARGET SYSTEM
BAPI_PLANNEDORDER_CREATE
Please note newly created Planned order in Target system would not have BOM EXPLOSION and Scheduling .
If need , Make a BDC recording as a add on step to explode Bom and Schedule by clicking those icons in Planned order .
Technical Team can do this .

Any function module or bapi to get sales order number and invoice number?

hi all,
with delivery order number provided, do we have any function module or bapi to get sales order number
and invoice number?
thanks.

Hi,
Check
BAPI_SALESORDER_CREATEFROMDAT1
BAPI_REMUREQSLISTA_CREATEMULT Agency Business: BAPI Create Invoice Lists from Vendor Billing Documents
BAPI_REMUREQSLISTB_CREATEMULT Agency Business: BAPI Create Invoice Lists from Payment Documents
BAPI_REMUREQSLISTC_CREATEMULT Agency Business: BAPI Create Invoice Lists from Posting Lists
BAPI_REMUREQSLIST_CHANGEMULT   Agency Business: Change Invoice List Documents BAPI
BAPI_REMUREQSLIST_GETLIST      Agency Business: BAPI Determine Detailed Data for Invoice List Documents
BAPI_REMUREQSLIST_RELEASE      Agency Business: BAPI Release Invoice List Documents to FI
Edited by: Neenu Jose on Nov 26, 2008 8:53 AM

How to create planned order from the sales order for a processing item

In the MTO sceanrio, assembly order is created directly from the sales order. I would like to create a planned order from the sales order.
I tried the Planning strategy group 81 in the material master but it didnt work.
Could you please let me know how to do it? Is it Schedule line config that controls whether planned order is created?
Thanks
Harish

Narayana,
Planning strategy 82 is the best & standard way of getting production order created on sale order create.
just assign this strategy in MRP 3 view under strategy group.
If not then using sale order reqt type ( KMFA- Assembly with production order) & assigning this to your sale order item category is also another way to create prodcution order without using planning strategy in material master.
Follow steps in SPRO-->Sales & dist --> basic functions >avail check &transfer of requirements> transfer reqts-->determination of reqt type using transaction
Here you may select the item category you in sale orders & assign KMFA to your item category. this will then give option in sale order create to change reqt type to KFMA for assebly orders.
If you need KFMA to be default assign it to Item cat/ MRP type ( PD) combo.
Regards
Ritesh

What are the ways to Copy Firm Planned Order from one ASCP Plan to another?

We run two EDD Plans with very similar options, but with different plan horizons.
To have the suggestions synchronized, we need to copy the "Firm Planned Orders" from one plan to another.
We tried inserting the records in MSC_ST_SUPPLIES with Order type 5 and firm planned type 1 with appropriate plan id, but Planning ODS Load is not considering those inserted records.
We don't want to insert directly into MSC_SUPPLIES.
Any inputs is appreciated.
Thanks
Sundar

You can also call a custom DTSX package in SSIS via the datamanager.
there are at least 5 ways of transfering data in BPC between apps.
1. Through the front end (excel etc) via evdre/evsnds
2. Through Script logic using *Dest App
3. Using BPC's standard export dtsx package via DM
4. Using SSIS using BPC's custom SSIS tasks
5. Through Script logic using stored procs.
i am sure people will come up with more.
remember if you use ssis and move data into any table but the wb, you need to process the cube afterwards.

Unable to view planned order from exceptional summary window

Hello All,
I have ran ASCP plan and it details out the exceptions and recommendations, but I am unable to view planned order from exceptional summary window>recommendations>cilck discrete jobs, no planned orders visible. This issue also shows up for other exceptions, on click of exceptions details it shows up the items but unable to take any actions.
I have tried by giving large no of days to view recommendations in preference.
Can someone help me to reslove issue.
Thanks,
Edited by: user604737 on Jul 18, 2011 6:09 AM

We don't have any query built on the exceptional window. As I am able to view below recommendations
Recommendations
Discrete Jobs 8
Purchase Req 27
When we click on discrete jobs/purchase req, its not showing any planned orders in supply window.
Can you please let me know, which is the backend table which stores supply information which are displayed in exceptional window.
Edited by: user604737 on Jul 18, 2011 9:15 AM

Tracing Planned Order from Purchase Req.

I want to find the Table - field relationship to trace a Planned order from Purchase Requisition.
Once we convert planned order to purchase requisition, system deletes planned order in MD04.
Is it possible to find out which planned order had been used to create purchase requisiton.

Hi Raj,
Generally Peggeed requirement is nothing but it represents the Higer level material. For example if raw material purchase requisition for 100 nos, then it is a Pegged Requiremet of the Assembly or the FERT. Simple its a dependent requiremnt for FERT or SFG.
MD09 is used to find out the Pegged Requirement. If you give the Purchase Requisitiion of the Raw material, then system will tell you the pegged requirement i.e. the production order order to which the purchase requisition belongs to.
Pegged requirement may be a Sales Order,Reservation,Production Order,Project,Network,WBS etc.
Select one MRP element in MD04 screen and if you select pegged requirements system will show you these elements created for any higher level material or not.
Note :Once a GR is done to PO, there is no more pegging possible for the PO, as it is in Inventory. Pegging is possible as long as it is an open order (PO, PR etc.)
Apart from above case If you have other requirment you to devlope your own.
Regards,
Ram

Can't Release firm planned order from ASCP.

I can't release firm planned order from ASCP the following massage appear " FRM-40200 , Field is protected against update ".
appreciate your help on that.
regards.
Ahmad.

Please post the details of the application release, database version and OS.
I can't release firm planned order from ASCP the following massage appear " FRM-40200 , Field is protected against update ".
appreciate your help on that.Please mention the navigation path along with the form name and version.
Thanks,
Hussein

BAPI to get Planned orders from SNP,PPDS in APO

Similar Messages

Maybe you are looking for