Base runtime exception in message maping transformation

Hi,
I am working with 1:N mapping.
I am making use of BPM.
But when I execute the entire scenario it gives error in the BPM's transformation step.
Error says , <b>BaseRuntimeException in message mapping transformation.</b>
But when I check the same payload in message mapping it works fine.
Kindly,provide some help regarding it.
Regards,
Nilima

Hi,
Please check your message mapping and Interface mapping.. correctly working or not..
BaseRuntimeException in message mapping transformation
You need not fill all the fields, but atleast all required fields should be filled. I mean if you are mapping a field A from source to field B in the target and if the field B in the target is mandatory then you should fill field B with some value otherwise you will get a mapping error
Or check your user defined function error ...
Take the SXMB_MONI sourece xml and come back to MM test ..
see below threads
Message Mapping Exception
Runtime Execption Message Mapping
/community [original link is broken]://need help in message transformation.
Message-Mapping transformation Error(Soap <-> XI <-> SAP)
Regards
Chilla..

Similar Messages

  • Runtime Exception in Message mapping transformation.

    hi Experts,
    i did IDOC(MATMAS05) to File scenario.
    if i tested the mapping in IR (Test tab), its working fine.
    but when i triggered the IDOC from SAP R/3 system, it reaches to SAP PI and showing Mapping falure in SXMB_Moni.
    then i took the payload from the MONI, and tesed with this payload in Mapping test tab in IR.
    there it is showing as java null pointer exception.
    can anybody tell me what is the problem here?
    thanks,
    kumar

    Hi,
    I think the required fields might not be occuring, if it occurs it might not have contianed any values thats the reason why message mapping is failing. For required fields you might have done some transformations which will not work if source required field has no values in it.
    So kindly check and correct.
    Regards,
    Chandra.

  • Multi Mapping Base Runtime Exception

    Hi all
    Im getting a Base Runtime Excecption in Multi mapping. My scenario is File to IDocs.
    when i test the message is IR its successful. However while testing End to end im getting Base Runtime excception.
    Any pointers to this
    --Keerthi

    Hi Abhishek,
    I tested from ID-Tools-Test configuration
    Its stopping at the Interface Detarmination&Mapping step. Now the Base Runtime exception is gone. Geeting a new error"Messages in multi-message format can only be sent to one Adapter Engine".
    According to the forum i've removed the Messages and Message 1 tag and tested.. But still the same error.
    My scenario is File to IDOCs using multi -mapping. I've changes the occurece to unbounded.. Used Enhanced Receiver determination..All my configuration seems perfect Also in SXMB_MONI multiple messages as desired are present under 'Message Branch According to Receiver List'
    But the error "Messages in multi-message format can only be sent to one Adapter Engine" is still there
    --Keerthi

  • Runtime Exception in Message mapping

    Hi Experts,
    I have a scenario of  IDoc to  <third party adapter> cXML.
    The message caught the below error
    RuntimeException in Message-Mapping transformation : Runtime exception during processing target field mapping ......./ShipTo[2]/Address/PostalAddress/DeliverTo (suppressed field). The message is: Exception:[java.lang.ArrayIndexOutOfBoundsException: 7] in class com.sap.xi.tf._M_IDOC_to_cXML_ method getShipToContact$[, , com.sap.aii.mappingtool.tf3.rt.Q2QFunctionWrapper@253fdd8a]
    Please suggest on what went wrong, as everything is working fine before.
    Thanks in advance.
    MK

    Mk:
    Please check if the source fields which are mapped to the target are all generated by the SAP Script and make sure that they have data so that when they are mapped to the target. If they are mapped and source fields don't have data then it may error out. Sometimes SAP Script might not generate a node if there is not data for it, make sure you handle that condition also.
    RuntimeException in Message-Mapping transformation is
    due to the missing TEXT_LINE element in the segment Z1VOBTH for the TEXT_ID 'INVOICE_TO_LOCATION'
    I am not able to understand this. is Text_ID subelement of Text_Line?? Could you please post the complete error message as it is.

  • RuntimeException in Message-Mapping transformation: Runtime exception durin

    Hi Friends,
    Iam going test Message Mapping, i got the error like
      RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:LeapIndent_R3_MT/Recordset/RowData/QTY_TNS. The message is: Exception:[java.lang.NumberFormatException: empty String] in class com.sap.aii.mappingtool.flib3.Arithm method formatNumber[, com.sap.aii.mappingtool.tf3.rt.Context@27f972cf]
    Pls help me ..
    Thanks & Regards,
    Nvr

    Hi Ravi,
      Thanks for ur reply, the problem is solved, the Date field is Mandaratory, they are not mention the data field, so that way the problem is coming.
    Thanks & Regards,
    NVR

  • Mapping Runtime Exception - How to see complete error message?

    Hello,
    we have a mapping runtime exception in SXMB_MONI. However only the first 4 lines are displayed are shown in <SAP:Stack>, the rest of the error message is needed however for trouble shooting.
    Is there any way to display the full error message? Executing a unit-test in ESR is not possible as there are some functions executed which just work during runtime.
    Thank you.

    Resolved: The full error is visible in the trace section of the header.

  • Runtime exception -message mappin in (sxi_monitor)

    hi
    i have done a simplw bpm scenario by following walk through bpm
    i get the error(red flag) in sxi_monitor as runtime exception -message mappin in (sxi_monitor)
    i checked the syntax of message mapping and also checkd every step of mesage mapping still cant identify the error
    could any one suggest me with suitable solutions

    Hi reddy
    Use below link
    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
    And download the PDF named " <b>How to Monitor Integration Processes - ccBPM</b> "
    Also did you test your mapping during design-tike or not.
    - Lalit -

  • Message mapping tab works fine ,runtime exception

    Hi ,
    Need some advice... I get a runtime messge mapping error ( system error) failing the substring logic although when i download the same payload and run in test tab it works fine. Has anyone encountered similar issue ?
    Thank you.

    objects are active.Your second point is good ,but this error only happens when a load test is done , partciular messages throw runtime exception and fail in mapping on substring logic but when the same payload is downloaded and run via message mapping tabl it runs through. i will try disabling the substring logic nodes.
    Secondly when i get a runtime exception ,i try to restart the same message and it goes thorugh successfully. So restarting in moni helps.... but does not explain why....
    Thanks
    Edited by: xi project on May 18, 2010 12:28 AM

  • SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)

    Hi,
    Curretly I am trying to test a Webservice on ECC 5.0, Oracle, Windows.
    Below is the error that I am facing.
    SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
    SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)
    In dev_rfc0:
    ERROR 03:20:57: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
    STATUSCODE() Received return code 404 ( Not found )
    ERROR 03:20:57: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
    PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
    occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
    1 with internal error id 111 and error text Unallowed RFC-XML Tag
    (SOAP_EINVALDOC) (fault location is 1 ).
    I have looked up on sdn, and also looked at note 919886.
    I have read several posts regarding creation of RFC Destination in sm59 of Type G, to get over this issue.
    But RFC Destination of type G is not available in ECC 5.0
    Is the error because of incorrect URL mentioned in logical port,
    I am unable to ping the host name mentioned in URL, looks like that machine is not in the network.
    does it mean the wsdl is not located at that particular host.
    Any suggestions would be greatly appreciated.
    Regards,
    Vishnu.

    Hi Anton,
    The complete error message in dev_rfc0:
    INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~SEND() Try to send message ( DEST =
    ,PATH = ,URL = http://hostname:portno/ ,SOAP Action =
    "ROI_R3_DF.roiSAPCreateOrder" )
    INFO 02:15:12: SOAP Transport Binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~SEND() Message sent
    INFO 02:15:12: SOAP Transport binding CL_SOAP_HTTP_TPBND_ROOT
    ->IF_SOAP_TRANSPORT_BINDING~RECEIVE() Try to receive message
    ERROR 02:15:12: SOAP HTTP Binding CL_SOAP_HTTP_TPBND_ROOT->HANDLE
    STATUSCODE() Received return code 404 ( Not found )
    ERROR 02:15:12: SOAP Message CL_SOAP_MESSAGE->IF_SOAP_MESSAGE
    PART~INITFOR_DESERIALIZE() A SOAP Runtime Core Exception
    occurred in method XP_READ_TAG of class CL_SOAP_XP at position id
    1 with internal error id 111 and error text Unallowed RFC-XML Tag
    (SOAP_EINVALDOC) (fault location is 1 ).
    After reading your post about the return code 404, I am in a dilemma whether, services in icman are unavailable or
    the services at the location of the wsdl in the other server.
    If you could clarify, it would be great.
    Thanks a lot.
    Vishnu.

  • Runtime exception caught in Message mapping

    Hi,
       I have a scenario where I am splitting the source message and map them to 3 different target structures.
    When I test the scenario in the Mapping under Test tab it is throwing an error as follows:
    RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/Target1/xmlJob. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd.
    The result for one of the target message in message mapping as follows: Is there some problem with the below lines in bold letters:There is a UDF which causing this transformation.
    Please give some inputs on this.
    Start tag [ns1:MT_O_T3]
    Add raw attribute [ xmlns:ns1="http://pharma.com/"]
    Start tag [Row]
    Start tag [Title]
    Put value [job titile]
    Close tag [Title]
    Start tag [JobID]
    Put value [reference # 1]
    Close tag [JobID]
    Start tag [Country]
    Put value [US]
    Close tag [Country]
    Start tag [City]
    Put value [Mawo]
    Close tag [City]
    Start tag [State]
    Put value [SA]
    Close tag [State]
    Start tag [ZipCode]
    Put value [50123]
    Close tag [ZipCode]
    Start tag [Cname]
    Put value [ ]
    Close tag [Cname]
    Start tag [Cphone]
    Put value [ ]
    Close tag [Cphone]
    Start tag [Cemail]
    Put value [ ]
    Close tag [Cemail]
    Start tag [Cweb]
    Put value [http://www.pharma.com/]
    Close tag [Cweb]
    Start tag [Category]
    Put value [9901]
    Close tag [Category]
    Start tag [Travel]
    Put value [100]
    Close tag [Travel]
    Start tag [Telecommute]
    Put value []
    Close tag [Telecommute]
    Start tag [JobType]
    Put value [Executive]
    Close tag [JobType]
    Start tag [Clearance]
    Put value [None]
    Close tag [Clearance]
    Start tag [Education]
    Put value [1]
    Close tag [Education]
    before check 50000
    after check 50000
    before check 100000
    after check 100000
    after average 75000
    Start tag [Salary]
    Put value [Avg: 75000]
    Close tag [Salary]
    Start tag [Suitable]
    Put value [ ]
    Close tag [Suitable]
    Start tag [Expire]
    Put value [23]
    Close tag [Expire]
    Start tag [Sdesc]
    Put value [job titile]
    Close tag [Sdesc]
    Start tag [Ldesc]
    Put value [null]
    Close tag [Ldesc]
    Start tag [Requirements]
    Put value [test description]
    Close tag [Requirements]
    Close tag [Row]
    Close tag [ns1:MT_O_T3]
    Thanks
    BPR

    u replied that u r getting the erro while testing it from test tab.
    Ur mapping is not correct check the same which i told u in my previous reply.
    r u using any FCC.
    chirag

  • Run time error during message mapping transformation

    Hello,
          i created a scenario and tried to execute . i got this error .
    RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZCRM_CRMXIF_ORDER_SAVE_M01/IDOC/BEGIN. The message is: Exception:[java.lang.RuntimeException: Error: Occurred in RFC Look UpPlain exception:Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. com.sap.aii.mapping.lookup.LookupException: Problem when calling an adapter by using communication channel RFC_Lookup_Receiver (Party: , Service: Test_ReceiverSystem, Object ID: 1772b13e46b93b99bca48e278463007d) Check whether the communication channel exists in the Integration Directory; also check the cache notifications for the instance Integration Server (central Adapter-Engine) Channel object with Id Channel:1772b13e46b93b99bca48e278463007d not available in CPA Cache. at com.sap.aii.ibrun.server.lookup.AdapterProxyLocal.<init>(AdapterProxyLocal.java:61) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.getProxy(SystemAccessorInternal.java:98) at com.sap.aii.ibrun.server.lookup.SystemAccessorInternal.<init>(SystemAccessorInternal.java:38) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.getConnection(SystemAccessorHmiServer.java:270) at com.sap.aii.ibrun.server.lookup.SystemAccessorHmiServer.process(SystemAccessorHmiServer.java:70) at com.sap.aii.utilxi.hmis.server.HmisServiceImpl.invokeMethod(HmisServiceImpl.java:169) at com.sap.aii.utilxi.hmis.server.HmisServer.process(HmisServer.java:178) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:296) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.processRequestByHmiServer(HmisServletImpl.java:211) at com.sap.aii.utilxi.hmis.web.workers.HmisInternalClient.doWork(HmisInternalClient.java:70) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doWork(HmisServletImpl.java:496) at com.sap.aii.utilxi.hmis.web.HmisServletImpl.doPost(HmisServletImpl.java:634) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) ] in class com.sap.xi.tf._XiameterBasicRegistration_MM_ method crmRfcLookUp$[, , , , Test_ReceiverSystem, , com.sap.aii.mappingtool.tf3.rt.Context@26dd0a50]
    can any one tel me wats going wrong ??

    The error shows that you are using business system and comm. channel in UDF for doing some processing. The error is because it is not able to locate the specified comm channel for the business sytem.
    please check if the comm. channel name and business system names are spelled correctly. Also you can try refreshing the CPA cache/ XI cache.

  • Runtime exception for Date format

    Hi,
    Scenario : RFC to IDOC
    found the error in my payload :
    RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZORDERS06/IDOC/E1EDK03/DATUM. The message is: Unparseable date: "2008-05-19" at com.sap.aii.mappingtool.tf3.AMappingProgram.start
    Here i has used DateTransformation from the Date Function.
    How can i give the format for Target side here.
    Regards,
    yeswanth.

    Hello Yeshwanth,
    RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ZORDERS06/IDOC/E1EDK03/DATUM. The message is: Unparseable date: "2008-05-19" at com.sap.aii.mappingtool.tf3.AMappingProgram.start
    Here i has used DateTransformation from the Date Function.
    In Date Trans Properties:
    In Format Source date u select : yyyy-mm-dd
    In Target Format u select: yyyy/mm/dd
    Thanks,
    Satya

  • How to handle runtime exceptions for sync scenario?

    Hi Experts,
       I have a synchronous scenario.
       Request :
       webservice -
    > sends input data -
    > PI -
    > SAP R/3 --BAPI
       Response:
       webservice -<---  PI <sends back any validation error or successfully processed message----- SAP R/3 --BAPI
       Here a webservice uses SOAP adapter to send input data to PI. While PI uses ABAP proxy to send data to SAP R/3.
       The problem is when the BAPI takes too long to process and resulting in timeout exception in PI. Is there some way we can catch this runtime exception in PI and send it to webservice as response?
       Please help!
    Thanks & Regards,
    Gopal

    Hi Gopal,
    as mentioned by otheres: the main issue is here to detect the reason for performance lack...
    >Is there some way we can catch this runtime exception in PI and send it to webservice as response?
    You can invoke a Business Process and open a sync / asyn Bridge. In the process call the FM synchronous and define an exception branch which you access in case of system failure. In the exception branch execute a transformation step to fill the response container with a corresponding error message.
    Regards,
    Udo

  • Throwing Runtime Exceptions from BPM. How?

    Hi !
    I want to make appear a red flag in the SXMB_MONI as a result of a custom condition inside a BPM. I tried with the control step, but it makes no "red flag".
    Should I make a transform step between 2 dummy message types with a UDF that throws the runtime exception there?? is there another way ?? We want a red flag as a result of a expired deadline while waiting a file adapter transport acknowledgement.
    Thanks !!
    Matias.

    Matias,
    As you said before you want the BPM to be errored out if it reach the deadline, am I right. In control step if u say cancel process it equivalent to logically deleting the work items, so obviously you will get an succesfull message. What I suggest you to do is in  Deadline branch - control branch select throw exception. The exception name has to be defined in Block level. So if you throw an exception it will look for the exception branch in the same block level if not the higher(super)block level, if it couldn't find the exception branch it will run out to error. Actually the exception branch is used to catch that exception and continue the rest of the process, so i think there is no need for defining the exception branch itself.
    Hope it helps you!!!
    Best regards,
    raj.

  • Repeate Message after RuntimeException in Message-Mapping transformation

    Hello Experts,
    I have a mapping defined with a UDF. In the mapping editor the tests were successfull but in the reale world - of course not
    Now I have a message in the Integration Server with red flag because of
    com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /LIST/S_UNB/S_UNH/G_SSG18/S_GID/C_C213/D_7224. The message is: Exception:[java.lang.NumberFormatException: For input string: "__cC_"]
    I've located the error in the UDF and want to repeate the message with the new mapping. But again the same error although the test in the mapping tool (with the original payload) was successfull.
    It must be possible to repeate those messages but how?
    Thanks a lot.
    Christian

    This was a little bit strange. But after the import, the version of the mapping in PROD was different from TEST.
    I've changed the description Field of the Mapping in Test, activated the version and did the export/import again. Now the versions were the same and after repeating the message everything is o.k.
    THANKS ALL FOR YOUR HELP!
    Christian

Maybe you are looking for