Batch Capture - Frame rate changes after first clip

Hey everybody,
Working in CS4 on a Mac, and trying to simply batch capture about 35 clips after all have been logged accurately.
I'm using the DVX100A, and shot in 24Pa. So I have set up my sequence settings to DV 23.98 Fps, and 16:9 Progressive.
Upon batch capturing (making sure the capture settings are the same) the first clip is captured at 23.98 and works fine, then every one after that 'captures' at 29.97. I say 'captures' because it says it is captured but when I try and play it in the source monitor Premiere crashes or freezes.
Has anyone else experienced this issue? Thanks for any input regarding this issue.

Then I changed Recording Setup to 480i/30p...My thoughts were that this would be slowed down a little.
That is an incorrect thought. DV tape runs at 29.97fps always. Even 24p...that runs at 29.97 but has the film like cadence. If you want to shoot slow motion, you need to shoot 720p. That is a 60 frame format. You can shoot 720p24 to get 23.98, then there is a trick to get the camera to shoot 60fps and record it as 24fps. The Barry Green book that comes with the camera explains that. And that is SMOOTH slow motion.
Now the camera ships with a 16GB P2 card. One comes in the box, along with the Barry Green book. Did you not get that? Where did you buy the camera?
Shane

Similar Messages

  • Frame rate changes after psd imort

    I'm not so experienced in Motion. When i start i use a PAL preset to create a new project. After that i want to import a psd file as project, in order to animate all layers. After that the frame rate has changed in 30 fps! I can't find anything in de user manual about it.
    G4 pb 1,67   Mac OS X (10.4.7)   1.5 gb ram

    You're creating 2 separate projects when you do this - one when you created a project using a PAL preset, then a second time when you imported a PSD file AS a project (this creates a brand-new project using the PSD file, it doesn't import it into the one you already created). The frame rate of a project can't be changed after it's been created.
    What you need to do is create a new PAL project, then drag & drop the PSD file from the File Browser into your PAL project, hold there a second and choose "import all layers" from the drop menu, or use the Import command (NOT "Import As Project") to bring your PSD into your project.

  • Reconnecting media after frame rate change

    Shane Ross wrote a reply ( see below )  to a person that had the same problem as I am now.
    I shot with HVX200 using the Firestore that converted footage to 59.94. Then, mid-project I shot with the P2 which shot at 24. I now have 2 diff. frame rates
    I tested some clips in Compressor comverting the 24 to 59.94.
    Using FCP Studio 2 , I was unable to reconnect the media without the in/out points being off with varying degrees.  Doing an entire re-edit will be painful.
    QUESTION : Do I really have to convert the 24 to 59.94? Would it significantly affect output?
    The codec is the same for all footage.  ( DVC PRO HD 720P. )
    THANKS!
    [elizabeth charles] "My question is, is there anyway to change the files in my timeline to the conformed files without having to begin my editing again?"
    Nope. 
    You did a bad thing.  Editing, finishing, then changing the frame rate of your masters.  FCP cannot reconnect to media with differing frame rates.  Because the duration of the footage is different, and the frame rate is different. The footage has the same amount of frames..., but now they play at a different frame rate, so the duration is different. You'll have to re-edit with the new masters.
    But...RECONFORM...that changes the frame rate, as well as the speed in which they play.  30fps conformed to 24fps will play in slight slow motion.  If you want the footage to play at a different frame rate, but the same speed...normal speed...you need to use Compressor.
    Shane

    gang allows you to lock the viewer and canvas together so when you move one, the other moves the same amount.  To match back your footage, you find a frame with a clear difference from the previous frame, for example when someone blinks.  You then find the blink on the new source file in the viewer and then turn on the gang function It's the center thingamagic at the top of the canvas.  You then jump around the shot in the canvas and make sure the movement in the viewer matches.  you then find the in in the canvas and mark an in in the viewer, etc and replace the shot.  If this isn't clear post back.
    In compressor in the frame controls panel, you enable frame controls and set the rate conversion to best.

  • Frame Rate change when importing video into FCP 5

    I am importing an HD h264 file into FCP 5. The video when opened in QT shows that it's frame rate is 30fps, what I exported it at. When I Import the file into FCP 5 it changes the frame rate to 29.97fps, which is causing major video/audio syncing issues. Any thoughts on how to stop the frame rate change when importing? I tried changing my system settings and audio/video settings before the import to match the file and it is still picking it up at 29.97, major headache especially since I'm cutting industrial.

    yeah I'm kinda limited, working with video for the web and I'm making revisions as to what has been already posted. The H264s are the originals per say as we are using a screen capturing program to obtain the video, I could re export the originals at a truer format, but with the resources I'm given, its not truly the option I can afford to take. I've found a workaround through using imovie of all things, but I rather be in FCP. I've done some editing with h264s before and this is the first time I've seen this happen, it kind of reminds me of when I had an editor a few years back digitize video that was drop frame as non-drop.

  • Purchase order rate change after creation of gr.

    In t- code ME22N PO line item Rate change is possible after creation of GR against that line item.
    We want to restrict the po line item rate change after creation of goods receipt against that line item.
    Please suggest.

    solution 1 : Do not give authorization for ME22
    solution 2 : Grey out price chage , it should only be possible thru info records, and give authorization of info records in secured hands.
    You should not totally restrict price change after GR because there are possibilities that you might require to change rate after goods receipt also. In that case you have to change rate and then have to give restrospective effect to GR.
    try above 2 solutions which are simple

  • No audio imported after first clip

    I have been dealing with this issue for about 3 weeks now. I can import the clip with audio when I import the very first clip but afterwards all clips have no audio imported into the project.
    It is bizarre. I have not found anyone online having the same issue. I am using Premier Pro CC.
    I will probably have to erase the application and reinstall, but I was hoping there was a simpler option.

    here are two posts. Don't know if they will help you. I thought I saw posts like yesterday and day before. The links don't look like they will work, but they are a copy and paste from browser window.
    https://forums.adobe.com/thread/1572614?q=no audio after first clip
    https://forums.adobe.com/thread/1441198?q=no audio after first clip

  • Gradual rate change to a clip?

    Hi,
    normal or inverse fixed rate change to a clip is a standard function but how can I realize a gradual change: only cutting the clip in a sequence of segments?
    Henner

    Try Time Remapping.
    http://help.adobe.com/en_US/premierepro/cs/using/WSb6fcde95647ddd92-1b0447d7129b9389f08-7f ff.html

  • Premiere elements 13 changing the frame rate of the original clips

    Hi,
    I'm trying to make a gameplay video for YouTube... The clips I'm using are at a low frame rate (13-15 fps). When I put these clips into the editor, they get sped up to 30 fps. This increases the speed of the video and the preview window jumps back and forwards in the video.
    This is highly frustrating because I can not change the speed of my video, and I can't see what I'm editing... I've tried rendering the video but this makes no difference... Is there any way of getting around this problem???

    Excellent! I'm pretty sure that will solve the problem. The files are in raw "movie clip" format. That usually causes problems. I can't beleive I didn't think of that before! I'll convert the files to mp4 or avi and post again to comfirm that that really was the problem.
    Thanks for the quick response
    --> Just to comfirm, changing the format to mp4 worked!
    THANK YOU!!!!!!!!!!11

  • Is there a way to change the frame rate on an audio clip in the source monitor?

    Premiere CC6.  I am trying to sync audio and video by using "Merge Clips" but the audio seems to be counted in a 29.97 rate while the video is 23.98.  The sound person on set swears the audio TC should match the smart slate and that the frame rate is 23.98.  Any help or insights would be greatly appreciated.

    I think I may have solved it, actually.  I find that if I switch the timecode to NDF in the source viewer, it seems to work.  I have tried it on three clips and they have sync'd without problems.  Hopefully this will continue to be the case.

  • Frame snapping on composition frame rate change.

    Hello
    Just had a thought today for a feature request....
    It would be nice if when you brought up comp settings to have a switch to snap keyframes to the nearest whole frame when changing the comp frame rate i.e. from 30fps to 25fps.
    Also curious to know if the missing frame for sequences nag is ever going to be fixed in CS6?

    It would be the same one mentioned here.  Can't remember if it happens in CC, think it was fixed.
    http://forums.adobe.com/message/4568071
    Edit, after reading that thread a little further it was fixed in CC but not CS6.

  • Wrong capture frame rate

    Hi,
    I'm trying to conform a movie from recapture, and I'm with troubles.
    I'm capturing from HDCAM 1080i 59.94 and after capture my material should be 29.97fps. But always is different.
    Sometimes is 29.95 or 28.54 well... severals differents values.
    I see the speed of image is OK, I haven't drops.
    But when go to conform the timecodes doesn't match.
    FCP shows correct frame rate on Bin, but QT shows these variables frame rates.
    Anothers programs as Autodesk Smoke and Assimilate Scratch recognize the wrong frame rate too.
    I have a Mac Pro 12 core, using the latest Snow Leopard, FCP Studio 3 and QT.
    For storage have a External SAS disk array with 32 TB wich has a sustainted througput of 700MB/s (fully tested and OK).
    For capture I'm using a Aja Kona 3.
    Actually I already saw this problem in anothers versions of FCP and anothers machines.. but I never get to fix it.
    Please, someone already had this problem and fix it?
    Thanks in advance.
    Thiago Cabral

    QT almost is always wrong.  It plays what it can... and with Snow Leopard, QT X is just worse.  The fact that Smoke and Scratch report the wrong frame rate is really puzzling.  Try this...use the CONFORM option in Cinema Tools to conform the footage to 29.97.  Might be just the thing needed to LOCK that frame rate still.

  • Batch Capture vs Record Now and sub clips

    Can FCP do scene detection on capture?
    If not can I capture an entire tape, go back and create sub clips then use the media manager to delete what I don't want.

    I just completed logging and batch capturing a 1hr DV tape and the interaction between my camera and FCP is not terribly responsive. The picture quality while scrubbing wasn't very good either.
    So I thought it would probably be quicker, easier on the camera [and my eyes] if I captured first then logged, or created sub clips and then delete what I didn't want - otherwise I might end up with too much data.
    In PPro I just started capturing and it automatically made a new clip for every scene then all you had to do was re-name them. Very fast. You could also use sub clips but it didn't work very well so I'm a bit suspicious about doing it that way.

  • Only video, no audio after first clip?

    When I put the first clip into a new sequence the audio works fine but when I put any subsequent clips only the video appears but no audio. It was not doint this when I used it the other day. I though it might be something wrong with the video files so I tried using other clips that I had just been working with the other day with no problem and now they are doing the same thing. I really need to fix this quickly because I am trying to make a video that is due in class tomorrow. If anyone has experienced something like this or knows how to fix it please let me know. Thanks.

    More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    Are you allowing enough time after importing the files?
    Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693

  • Video frame rate change from video to video

    HI all ,
    when I use labview 2013 I found some strange in acquiring avi video
     when I acquire video from my computer the fps change from video to another one
    some video fps reach 800 fps and other reach 180 fps what is the problem 

    A lower frame rate is actually expected behavior if you are playing video through LabVIEW. This KB explains that LabVIEW analyzes the video one frame at a time and keeps it in the system memory on the CPU.  This can result in slower frame rates during playback. If you would like to simply view video through your front panel, it may be a good idea to embed Windows Media Player in the VI through an ActiveX control.
    -Erik S
    Applications Engineer
    National Instruments

  • Frame rate changing on import?

    I have video shot on a panasonic sdr-h18, the file comes up as a .mod, I use mpeg streamclip to demux it to unscaled m2v and .aiff, all is fine so far. According to mpeg streamclip, both the old and the new file are at 29.97, and quicktime agrees. FCE 3.51 imports it and says it's at 30fps (the sequence & project are 29.97, as are other video materials in the session). This is driving me nuts! Any ideas?

    Well, FCE does distinguish between the rates, and it lists videos of both frame rates in the session... and I've encountered sync drifting on edits on I've made on very long imported video in the past (over 45 minute long source material).
    I used the unscaled function on streamclip for two reasons:
    1. The original video was shot at 704x480, and it will absolutely be cropped and rescaled to an undetermined size later. I erroneously thought the video quality would be better unscaled, but after reading your post I re-imported it via your method and the video quality was noticibly improved. (It was also imported at 29.97 - go figure!)
    2. To reduce the files sizes. The .m2v + .aiff files roughly double the file size of the original .mod file, but the .mov file quadruples it! Also, once all the editing is completed, I can easily dump all the .aiff files as they won't be used in the final product (it's a music video)

Maybe you are looking for

  • Execute the expression in select statement

    CREATE TABLE TEST1   OFFICE_PRODUCTS     NUMBER,   OFFICE_ELECTRONICS  NUMBER Insert into TEST1 (OFFICE_PRODUCTS, OFFICE_ELECTRONICS) Values(1, 0); COMMIT; CREATE TABLE TEST2   EXPORT_FIELD_NAME         VARCHAR2(100 BYTE),   EXPORT_COLUMN_EXPRESSION 

  • Problem with the tag color in the richText

    Morning, I want to modify by html the color of a word in a richtext field. I know I can use the tags <b>bold</b>, <i>italic</i> in the richtext Field for one word. Which tag to use to change the color? Could you help me please? Thanks by advance. Jos

  • Need to restart Services before launching Essbase or Planning

    Hey guys, I have installed EPM 11.1.1.3 around 4-5 times on different PC's. However, every time I try to launch Essbase, for example, it says 'Could not connect to Administration Server'. For this I have to restart 'Administration Services Console' s

  • Which Oracle Certification Should I Start With

    Hi, I'm looking for some advice on which Oracle certification I should start with. Let me first tell you about me and my business goals. I an new to the SQL world but have a firm grasp of the RDBMS. I have also worked as a Business Analyst for a comp

  • Cannot get elements 13 to install camera raw8.7.1 on desktop. works  fine on laptop

    Elements 12 stopped reading olympus. orf raw files on desktop. Had installed Elements 13 on laptop and it upgraded to Camera Raw 8.7.1 fine. Uninstalled 12 on desktop, installed 13 and cannot get it to update from 8.6 to 8.7.1. Tried all adobe sugges