Batch definition level not known System inconsistency

Hi gurus,
When I create a new material via trcode MM01 the Error message displays:"Batch definition level not known System inconsistency"
How can I correct the error?
Thanks&Regards

Hi,
Are you trying to set the batch flag at the same time?
If so you need to set the configuration for batch management to indicate if batches are to be unique at the plant level etc.
SPRO Logistics General > Batch management > specify batch level and activate status management
Steve B

Similar Messages

Error - Batch definition level not known while UD

Hi Experts,
Please help on below Issue
For Inspectio type 10. After result recording when we do Usage Decision,
Showing Message :-
"Batch definition level not known.inconsistency!"
Regards,
Raghunandan

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

Error : Batch definition level not known

hello,
Any body know how to resolve this error.
Some transaction gives this Error.
First i was Copied a new Client In IDES for source client 800.
User Profile is SAP_ALL & SAP_NEW in both client 800 & new 910 but 910 shows such error.
Also during copy process it shows deleted lines 4
Is it due to deleted lines?

Hi Canan,
Kindly advise.
In OMCT
Batch level - Batch unique at plant level
Batch status management - Inactive.
Regards,
Raghunandan

System inconsistency message when saving networks

In PS, when trying to create a network using cj20n, we get an error message: "Batch definition level not known. System inconsistency" - message number - CZ 314
We checked the number ranges and the current number on the network range is higher than the actual current number. We have copied some projects from another system into this test system. Now, we cannot create or save any networks. Any quick response will be highly appreciated and rewarded with points.
Regards,
Venkat.

Hi Venkata,
Thank you for following up your own message and putting the solution here, this helped the same problem which i had faced.
Many thanks,
Krishna.

System went down after this message Client is not known to the mess server

Hi Guru's,
I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
Initially i got following error message 2 times in the system log reading:-
No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
After above message I got an information message Continuously 30 minutes in the system log reading:-
Client cinsapp1_PRI_00 is not known to the message serve
Then stoped the workproccess one by one
Stop Workproc 5, PID 4800
Stop Workproc13, PID 4468
Stop Workproc18, PID 4508
Stop Workproc11, PID 4452
Stop Workproc14, PID 4476
Stop Workproc12, PID 4460
Stop Workproc17, PID 4500
Stop Workproc24, PID 4560
Stop Workproc23, PID 4552
Stop Workproc25, PID 4576
Stop Workproc10, PID 4444
Stop Workproc16, PID 4492
Operating system call recv failed (error no. 10054)
Operating system call WSASend failed (error no. 10053)
Finally R/3 system was stoped.
Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
Thanks in advance,
Ramesh

Hi Experts,
How you fixed this issue, Please share with us.
because i am also facing the same problem in one of our SAP server.
Thanks & regards,
Pandiyan

Business system not known to SRM

Hi,
We are able to send and xml PO to SRM server, but we are getting ABAP Application error in the pipeline service of the IE of SRM.
In SXMB_MONI in SRM:
Under Trace:
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: SLD system QA2_220 is not known Programm: SAPLBBP_BD_MAPPING_SAPXML1; Include: LBBP_BD_MAPPING_SAPXML1F1Y; Line: 92</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
Under Error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/Basis/Global">StandardMessageFault</SAP:ApplicationFaultMessage>
<SAP:Stack>The application triggered an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
QA2_220 is defined in the XI SLD, and it is the sender service. I am not sure why it is saying "QA2_220 is not a known programm." Does anyone know why we are getting this error?
Any help is appreciated.
Thanks,
Karma

You need to associate the Logical System in SRM with the SLD Business System.
This is how to do it.
In the SRM system, go to the IMG through SPRO:
Goto SAP Implementation Guide->Supplier Relationship Management->SRM Server->Technical Basic Settings->Define Backend Systems
You should have the logical systems defined there. Scroll to the right and add the SLD Business system name under the "System Landscape Directory Name"
This should do it. Now when SRM tries to process the message from the Business system, it will look up the corresponding logical system from this entry.
Regards,
Jay

"not known error system" saving metadata

very often, but no always, when I save metadata in the file, appear an "not known error system" message

Hi, thanks for reply,
I use mainly raw files,
Giancarlo Majocchi
cell +393356263390
www.buildup-it.com
Inviato da iPad
Il giorno 17/mar/2014, alle ore 13:19, Tony Jay <[email protected]> ha scritto:
Re: "not known error system" saving metadata
created by Tony Jay in Photoshop Lightroom - View the full discussion
Hi welcome.
Are you able to furnish information about which files metadata is being saved - RAW files (XMP sidecar files in reality), JPEG, TIFF, PSD etc?
Are there any patterns to this error message appearing?
Tony Jay
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6216084#6216084
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6216084#6216084
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6216084#6216084. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Deployment warning: SC null null not known yet, can not get release level

Hi everybody,
During the deployment I'm getting the following warning (application_00.log):
SC null null not known yet, can not get release level for vendor: 'se.sync', name: 'BPE', location: 'Deployment Manager', counter: '42', change number: 'null'
BPE is the application name and "se.sync" is the provider-name from application-j2ee-engine.xml.
This seems to indicate that some release level (version?) is not set... How can this be fixed?
Regards,
Milosz

Hi Milosz,
the warning is because the deploy controller checks for correct version numbers in the DC/SC that is deployed.
You can just ignore it, your application should run just fine.
Regards,
Christian

Known issue: Cortana voice command definitions are not cleaned up after uninstalling the app (Windows 10 Insider Preview SDK and tools, April 2015 release)

Voice command definitions are not removed from Cortana's cache when an app is uninstalled. This may cause conflicts between two apps that share the same voice commands.

This issue should not impact your ability to reinstall and test the same application. However, you must reinstall the OS in order to reset the cache in cases where you are seeing conflicts between different apps.

Batch Management Level

Hi all,
Batch management drives us difficulty, all finished goods have a batch number in our system. But cause of this our system grows fastly and process management is so difficult. We think about cancelling batch management and use serial number management for product trace. But one of my friends offers me for managing batches as production order level. This means each production order (material differs) will have batch number and at trace the materials with serial number.
I want to know the effects of batch level to the system. For example it's useful to cancel batch management for system growth. Or have we use batch management at one level like production order level? For CO side, it's useful for using batches as production level or completely cancel batch management ?
Thanks,

>
techmaster wrote:
> Hi all,
> Batch management drives us difficulty, all finished goods have a batch number in our system. But cause of this our system grows fastly and process management is so difficult. We think about cancelling batch management and use serial number management for product trace. But one of my friends offers me for managing batches as production order level. This means each production order (material differs) will have batch number and at trace the materials with serial number.
>
> I want to know the effects of batch level to the system. For example it's useful to cancel batch management for system growth. Or have we use batch management at one level like production order level? For CO side, it's useful for using batches as production level or completely cancel batch management ?
>
> Thanks,
It appears that you are referirng to an organization which follows discrete manufacturing techniques, where the individual finished item needs to be uniquely identifiable, which is probably satisfied by batches. Your concern of batch numbers getting exhausted is pertitent, given the limitation of 10 character for the batch number.
If I try to compare the pros and cons of serial numbers vis a vis batch numbers, here are the points
- Batch numbers have the obvious limitation of 10 characters, serial numbers allow 18
- Batches are normally used in process industry (pharma, food etc), serial numbers are linked to equipments, and have the functionality to check the status at the client level (within which plant/sloc, with customer etc)
- Tracing the history of a serial number becomes easier (particularly useful in case of customer returns / repairs)
- Serial numbers are unique, you can have multiple units of a particular batch.
About the question of getting rid of batches altogether, I feel that when serial numbers are present, batches will only lead to additional entry in all movements. Moreover, they will only be redundant, unless you plan to group a few items (serial numbers) into a single batch.
From the CO side, I feel that the production order is the CO object, and hence all costs are accumulated against the order. I do not think having a batch will help from the CO perspective.
Regards,
Aroop

BPM_DATA_COLLECTION fails with (Output device "" not known) error

Hi all,
I have an issue with Output BPM_DATA_COLLECTION_1 job in the satellite system failing with 'Output device "" not known error. Since it is collecting data for Solution Manager system why does is it trying to find an output device.
It did not fail before and now I added another key figure (custom one) which is done the same way the other custom monitors are done in "Z_BPM_ECU_COLLECTOR" report and then in /SSA/EXM program, but the collector job started to fail.
Also, for some reason there are two BPM_DATA_COLLECTION jobs, one is BPM_DATA_COLLECTION_1 and the other is BPM_DATA_COLLECTION_2. _1 runs every 5 min and _2 is less frequent. They both seem to runt the same job which is /SSA/EXS. Why are there two jobs scheduled from solution manager in my satellite system?
Thank you very much for your help!

I am experiencing this same issue in our ECC 6.0 system. We currently have ST-A/PI release 01M_ECC600 level 0001 applied to our system. These jobs finish successfully in SM37, but I'm seeing the same error messages in our system logs (SM21).
When I try to update the output device that is associated with these jobs, the user ID running the jobs is not valid since it's user type is Communication Data.
Does anyone know if it ok to change the user for this job? Should it be run by DDIC? I believe the jobs were created automatically when we applied ST-A/PI release 01M_ECC600 level 0001.

Output device "" not known

Hi Expert,
I try to execute SWU3 for automatic customizing workflow on ECC 6.0.
I have got error Output device "" not known and no background job is executing in my system .
This error I am getting for this activities
Schedule Background Job for Missed Deadlines
Schedule Background Job for Work Items with Errors
Schedule Background Job for Condition Evaluation
Schedule Background Job for Deadline Monitoring
I search in other topic, it mention that basis guy do something bot not clear how to solve it.
Please help me.
Thanks in advance.

Hi Karri,
Thanks for the reply.
Yes I do have authorization for execute SWU3. My user ID have same authorization as sap*.
WF-Batch User Exist, RFC for workflow localXXX also set.
From thread : Error activating SWU3 - output device "" unknown
I see this issue solve by basis, they adding some parameters to start and instance profile.
But I have no idea which parameters.

How to Setup Batch Management Level (Material vs Client)

Hi Experts,
I had a question about the level at which I should be setting up Batch Management. The requirements that we have are:
- We want uniqueness in the batch being created.
- We have split valuation active at the Batch Level.
Hence, we have nailed down to the following 2 options: 1. Client level or 2. Material level. (I know that I will not be using Plant level because we do a lot of STO's and we do not want to lose the characteristics in the Batch at the plant level. So the plant level is out of scope.)
Client Level: Although the client level gives us the uniqueness and supports most of our requirements, my fear with going at the client level is that it is too rigid and MAY cause problems in the future. Is that true? What would be issues/ concerns that you have faced when you have had Batch Management activated at the client level.
Material Level: If I setup the system at this level, I would like to be able to create a Batch number for a material across the entire client only once. E.g. MAT1 can have BATCH 123 only once across the whole client. MAT 2 can have BATCH 123 but the Material# and the Batch # uniqueness should be maintained thoroughly.
I would like to try out this level but my problem is I am unable to understand and setup this level completely. I have gone through some pretty good discussion on this topic but still am unable to understand it thoroughly. The link to this discussion is (http://www.sapfans.com/forums/viewtopic.php?f=27&t=80407). If you refer to this link, it says u2013 Client/ Material Level. What does client/material level mean? Can you please help me understand it. Also, if I setup Batch management at this level, I would like the system to auto-generate numbers for me exactly as I have mentioned above. Is there a way to do so? I was trying to setup the BATCH_MAT number range object with the batch level at Material level but the system seems to always default to the BATCH_CLT level and give us numbers. Is there a way to fix the system to check the BATCH_MAT number range object and give the batch numbering per my requirements. What happens if I use the Material Level Batch management with BATCH_CLT number range object?
Your help is highly appreciated.
Edited by: TV_SINR on Jul 16, 2010 8:52 PM

Check following customizing:
Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
If you want to change the batch level, you have to start conversion to activate the change.
Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
"Specify Batch Level and Activate Status Management".
If you want to work with same batches for different materials, you should use "Batch unique at material level".
Logistics General --> Batch Management --> Batch Number Assignment
Here you can define how the system should create batch numbers.
Best Regards, Dirk

Changing Batch Management Level from Material to Plant

Hi all,
We are investigating changing our batch management level from material to plant to meet business requirements.
SAP has pointed us to a note with a program to reset the batch level, as well as highlighting some things to look out for.
I've conducted the change in a playpen system and so far it looks relatively straightforward, with complexities arising only when characteristics exist, or when a batch exists in multiple plants.
Seems that batch master data is moved from MCH1 to MCHA, including the object link number to classification. Unfortunately it seems a limitation of the conversion is that the batch master data is copied to ONE plant only in MCHA, no doubt due to the fact the object number link to classification must be unique.
My question is this: has anyone performed this change before, and if so can you offer me any advice on what to look out for, or potential problems that arose after the change?
Any help or comments are appreciated.
Mark.

hi..
first of all try this simple one...
You will have to delete all the materials, remove stock and then switch the batch management flag.
Or
To convert the batch from plant level to material there is Conversion Program defind by the SAP...
1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.
2. Create the report ZCHTCUCH, which is specified in the attachment.
3. Run this report in the clients for which you want to reset batch level to plant level.
4. Call transaction OMCT.
5. Check whether the batch level for "Batch unique at plant level" is set.
6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).
7. Execute the function "Batch Level -> Conversion".
8. Define a plant for a plant view that may be missing.
9. Always execute the report in the test mode first. Analyze the error log.
10. If no errors occur, you can execute the report in production mode.
11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.
try this out..hope is works,,
Thanks..

Object Project Definition could not be created

Hi Experts,
I am facing some trouble with multilevel controlling integration. Whenever I transfer a project I am getting the following error in cProjects:
Costing data may not be up-to-date Display Help
Error occurred in accounting - see controlling cockpit (cProjects) Display Help
In the Controlling Cockpit I find the following error:
Message Text
Object Project Definition TEST_01 could not be created
Technical Data
Message type__________ E (Error)
Message class_________ CNIF_PI (BAPI Notifications of Project System)
Message number________ 007
Message variable 1____ Project Definition
Message variable 2____ TEST_01
Message variable 3____
Message variable 4____
Message Attributes
Level of detail_______
Problem class_________
Sort criterion________
Number________________
Could you please provide some ideas on this?
Thanks a lot!!
Neil
Edit: Any idea on this?
Edited by: Neil Billqvist on Nov 6, 2009 2:28 PM

Hi all,
I have reviewed the customizing and I cannot find anything missing.
Just to add some more information, if I go to the controlling cockpit, select the "Definition could not be created" error, and click in the autocheck option the PS project IS correctly created!!!
Do you have any ideas on this or on how can I track down the root error?
Thanks!
Neil

Batch definition level not known System inconsistency

Similar Messages

Maybe you are looking for