Batch /exe file to convert dbf to csv for sqlldr loading..!

Hi all,
I am having a tough problem as below.
I need to load a .dbf file into a oracle table by sql loader.
Can to tell me the best way to convert .dbf file to .csv so that I can load it via sql loader.
I need some batch file or exe file code to convert .dbf to .csv file.
i was doing it manually as in below steps.
1- open .dbf file in excel.
2-save it as .csv option.
3-use sql loaderfor converted .dbf file.
I want to save my manual work of excel.Kindly help
kindly light into it...
rgds,
pc

There are lots of dbf to CSV converter available in net and you can find by Google!. In the Tom's package you can change a little bit to generate a CSV file.

Similar Messages

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site

Due to Photoshop Elements 12 Organizer I uninstalled the program. When I re-installed Photoshop Elements 12 on the same computer the "Photoshop Elements 12.0.exe" file is not available. I have tried loading Photoshop Elements 12 from the Adobe web site without success.

The Elements 12 shortcut can't find the Elements12.0.exe file so the program will not load. I can load the editor from its .exe file but not the organizer.

Want to start PSE 12 in photo editor but it will only start in Orgaizer, can't get to welcome screen and the .exe file that Adobe said to look for does not exist on my files

Have tried to start PSE 12 in photo editor but it continues to start in Organizer. I do not want my pictures loaded in Organizer at all. Saw a page on the web that said to click on an .exe editor file but that is not on my files. Also cannot get a welcome screen to come up, only an organizer even though I checked it the first time to come up in photo editor. I'm now having Organizer crammed down my throat. Tried online chat but was cut off with the statement that no support is offered for v12 any longer.

Hi,
You failed to say which operating system you are running on so I'm assuming it is Windows of some type.
You should be able to find the following files, using explorer, depending on your system.
64bit system: "C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
32bit system: "C:\Program Files\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe"
Double clicking on that should start the editor - suggest to create a shortcut to it.
If you can't find one of those files, then you either installed it somewhere else or you need to re-install elements.
Brian

Leading 0's in BW have been removed in BPC but how to convert internal to external for hierarchy load.

When loading MD/Hierarchy into BPC from BW, I'm removing 0's appended to MD using js: parseInt(%external).
BW --> 000000123456
BPC -->123456
But when loading Hierarchy later I need to have a conversion which allow me tell system that BPC members are without 0's
BW-->000011111
BPC-->11111
I've tried the below different conversion mappings but didn't work.
External               Internal
      *                    js:parseInt(%external)
0000?????              ?????
0000*                       *
Some how I need to tell system that 000011111 has been changed to 11111 in BPC.
Can you guys please help me with the correct conversion??

Hi Asif,
js:parseInt(%external) is correct, make sure you are applying the conversion for all the IDs and NODEs.
Andy

Loading exe file using loadMovieNum

I have converted SWF into EXE using SWF Studio 2.2 to be able
to run flash
without havinf a FLASH player installed.
It works fine except one feature. On clicking a picture it is
supposed to
load another movie using loadMovieNum()
That other movie is too converted to EXE and loadMovieNum is
called as
loadMovieNum(another_movie.exe,0) which loads nothing though
another_movie.exe is in the same folder as another_movie.swf
which loads
fine. I indicated the absolute path to another_movie.exe like
"c:/folder1/folder2/another_movie.exe" - no joy.
Does this mean that loadMovieNum loads SWF only and cannot be
used to load
EXE. If this is the case, how do I get round this?

Thanks. Do you mean that the main exe file will serve as a
projector for swf
loaded into it?
"the fleece" <[email protected]> wrote in
message
news:e6ov3j$gse$[email protected]..
> no, you cant load up an exe.
> but you dont have to, its just the main file that needs
to be and exe,
export the others as swf

How to create the exe files for java application

How to create the exe file for java application?
got any software to do that?
Thanks

In terms of converting java applications into exe files, there are 3 schools of thought:
1) Instead of converting it to an exe, convert it to a jar file. Jar files are more portable than exe files because they can be double-clicked on any operating system. The caveat is that a Java interpreter must be installed on the target computer for the double-clicking to work.
http://developer.java.sun.com/developer/Books/javaprogramming/JAR/
2) Create an exe launcher that, when double-clicked, attempts to find a Java interpreter on the local computer and launches the Java application. The exe file is still double-clickable but whether your java application runs depends on whether a Java interpretor is installed on the target computer.
http://www.sureshotsoftware.com/exej/
http://www.objects.com.au/products/jstart/index.jsp
http://www.duckware.com/products/javatools.html
http://www.ucware.com/jexec/
http://www.rolemaker.dk/nonRoleMaker/javalauncher/
http://www.jelude.cjb.net/
http://thor.prohosting.com/~dfolly/java/index.html
3) Create an exe launcher that bundles a Java interpretor. Same as above but when the exe file is double-clicked, it searches for a Java interpreter and if one is not found, it installs one on the target computer. The caveat is that the exe file would have an overhead of 10 MB in size for the interpreter.
http://www.excelsior-usa.com/jet.html (evaluation version available)
4) Convert the Java application into a native exe file. The caveat is that if you use Swing for your GUI, it won't be converted. Also this option is still somewhat experimental.
Can't think of any free options right now.

Can not see cFP-2220 after creating an exe file

I am using a cFP-2220 with LabView 2011. I can see the cFP-2220 with Max, the program I created runs in my PC but the data from the cFP-2220 it is slow to up date.
I access the cFP-2220 thru the network terminal and a net card in my PC.
I have created an EXE file to run in the PC for that test stand as a stand along program. The program runs but it does not see the cFP-2220 or any of the data been collected. The test stand PC does have MAX install. When I run MAX in the stand PC it sees the cFP-2220 and can read the data from the modules the PC is wire to the cFP-2220 thru a net card.

Sorry for the delay to respond... I do have installed the minimun files that are available Field Piont 6.0.10 and LabView RT 11 is part of them.
I also using share variables. The program VI runs fine in my PC but when I create the exe file and deploy on the test stand it asks fot the location of the FPLV,dll and the NI_TGT.dll and it can not read or write to any of the DAQmx vi's.
I accidently remove one my FP-SG-140 from the list of inputs, I did put it back but I damage how the share variables weere working I am getting and error -1950679023 and it does not see any of my inputs.
I have another question how do I down load the variables to the cFP-2220 that is another erros that shows up when I installed other files into the cFP.

How to upload a PDF document from an e-mail attachment file and convert it to word document for edit

I received an e-mail.The attachment is in PDF format. I would like to upload the file to convert it to word for editing.How to do that?

Hi Quincy,
You would need to save the file to your desktop and upload it from there for conversion using your ExportPDF subscription.
Let me know if you need further assistance!
Regards, Stacy

Oracle 9iLite download setup.exe file does not work

Like many people (I am discovering more by the minute), I am unable to install 9i Lite.5.01. When the setup.exe file is triggered, a hourglass appears for a second, then nothing...
I am installing on a windows 2000 terminal server, therefore I have to go through (Control Panel) Add/Remove Programs. The Oracle Universal Installer says that setup.exe is either a directory or is corrupt.
I have tried a couple of fixes suggested in this forum, such as unzipping the files to /install/disk, but to no avail. I have also tried downloading the software again, but with the same results.
Is there anyone out there who has successfully overcome this problem ?

Yes, there has been a problem reported with setup.exe on the Pentium 4 processor.
To overcome the problem, copy the contents of the CD on to your hard drive.
Then search for every occurence of the file symcjit.dll under the base directory where u have copied from your CD.
and rename them to symcjit.old.
Then launch setup.exe.
This should take care of the problem

Mac opening exe. files with Captivate 5

I am a Mac user and need to open exe. files from my lecturer. I have got Captivate 5 and have updated it with the patch BUT nothing I seem to do enables me to open the files. Can anyone please help?

Hello,
MAC will not open .exe files as .app is the extension for MAC Executable files, or if you want to install an application on MAC, you can use .dmg format
Thanks

Exe files on a mac

I have a Mac book pro and I am trying to open a exe file. I understand that file is a windows based file. Can I use my Mac to open?
Please advise.....

Mac OSx cannot open/run Windows' *.exe files. You will need Windows for that.
Axel F.

Unable to Download Exe Files

I am frustrated. I am constantly needing to download exe files. All the programs I am told to use tell me that the files are not compatible with the program. How can I fix this?There are a lot of great programs that I cannot access. All help appreciated...M.

iOS devices can not execute .exe files.
If you want programs for your iPad you have to us the App Store.

How Can I Create A .exe file in java using th enetbeans IDE

Dear Friends
i am trying to ceate a .exe file in th e netbeans IDE for jav prorams.
I am uanble to fine the option to create the .exe file.
i will be thankfull if you will help me out.

Search for exe4j

Microsoft Word file copy from laptop to macbook appear as exe file

When I copy Microsoft Word file from HP laptop to macbook, the file appear as exe file. My macbook has Office for Mac installed already. Please advise.

I did replaced "exe" with "docx". But now it prompt me a message which I have no clue what should I do. Please advise.

Windows batch file issue for Dbf to csv

Hello,
I am in a tough situation.I need to create a batch file in windows to convert .dbf file to .csv.
i am using below code for doing this .
dbf_2_ora.bat.....
f:
cd \Retail_Work\DATA_201\test
copy C_N_DETL.DBF C_N_DETL_TEST.csv
when I am running above bat file "C_N_DETL_TEST.csv" is creating but when I am opening this file data is separated by "tab".
kindly help me to create a csv file from dbf file withput spaces/tab/whitespaces.
hel[p me

IMPORT DATA is a server side command (just as the documentation tells you)
The SAP HANA server cannot access your workstation or the folders on it.
This (and a lot more around data import/export) has been discussed a lot here in SCN already.
A little research effort would have clarified this.
- Lars

Batch /exe file to convert dbf to csv for sqlldr loading..!

Similar Messages

Maybe you are looking for