Batch internl number assignment

Hello SAP gurus,
    Lets suppose i have finished product, semifinished product and raw material with me.I am managing all of them in batches.I want to use automatic creation of batch (internal number assignment) for them.Now my question is i want to use different number ranges for all of them.
        Currrently its using the same number range for all of them.Suppose if i created one production order for semifinished product than its giving it batch no. 0000001.Again if i create production order for finished material than its giving it batch no. 0000002.
    I want different number ranges for both of them by internal number ranges only.
    plz guide me in solving this problem.

Hi
you want to maintain the different number ranges based on Material Types (Finished/Semi-finished/Raw material).
Please follow SPRO IMG Path
Logistics General >> Batch Management >> Batch Number assignment >> Configure Customer Exit for Intern. Batch Number assignment.
Going through node documentation, you need to use one of the fucntional module exist incorporated in SAP enhencement SAPLV01Z.
Pl go through documentation in detail and incorporate required ABAP code in the respective functional module Exit.
Thanks
JK

Similar Messages

  • Enter batch number - No Automatic Batch Number assignment allowed for plant

    Hi SAP Gurus,
    Upon checking the created new Goods receipt for Purchasing Order in tcode migo_gr, checking with the Batch tab, we can't see a batch number, then clicking the classification tab showing the message Enter batch number - No Automatic Batch Number assignment allowed for plant - XXXX
    the question is there any missing configuration based for this kind of error? ive checked the availability check for the plant and it already setup. Hope for your kind responses.
    Thanks

    HI,
    Kindy check the below configuratoin
    Logistics - General>Batch Management>Creation of New Batches>Define Batch Creation for Goods Movements
    for your movement type check what is the Strategy for the new batches.
    here you should assigne only automatic.
    Also let me know what is the level of batch mgt> is it at client level, Plant level, Material level.?
    reg
    Dsk

  • Automatic external batch number assignment

    Hi gurus,
    I'm facing to an huge issue.
    I've created an subcontracting PO. Into this PO, I have inserted a external batch number to a component.
    When I make a good receipt with MB0A transaction. movement type 101 for the finished product and movement type 543/O for component. the external batch number is populated in the material document. But I don't want the MB0A transaction populates this bactch number. I want to input it manually in this transaction.
    Is it possible to disengage the automatic external batch number assignment by the MB0A transaction and insert a external batch number manually?
    Thanks for your help.
    L. YDIR

    Try this exit, its for external bacth number assignment EXIT_SAPLV01Z_003 .
    EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
    You also have the option of suppressing the batch number check, for example, based on the material or plant.
    Further : EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
    You also have the option of suppressing the batch number check, for example, based on the material or plant.
    Just wanted to ask : which version of SAP are u working on?  is it some old version?  coz I see u using MB* Transactions, while SA now recommends most goods movements by MIGO TCODE, aslo most new enhancements are for MIGO .

  • Batch Number assigned to Process Order

    Hi Experts,
    Which table should I use if I want to get the Batch number assigned in a process order?
    Thanks,
    Kumar

    Hi,
    If u want to get the batch number of Process Order FG then u can get it from AFPO.If u want item level then get it from MSEG table.
    Regards
    R.Brahmankar

  • Serial number assignment to batch split position in outbound delivery

    Hello All,
    I have a question for which I can't find any answer even though I have been struggling through several forums, etc. Let me explain it:
    I create a outbound delivery for material XYZ which is batch managed and serial number managed. An automatic batch determination takes place. Thus a batch split is created for the main item 10. Since the serial number is required, I enter the serial number for the batch split position 900001. Press enter and save.
    The problem is, that afterwards the batch split positions aren't shown in the Batch split screen using transaction VL02N (the batch split positions and also the serial number can be displayed via VL03N). The issue is that the serial number entered cannot be removed nor the batch split can be changed anymore.
    Message VL429: Batch/Val.type split only possible if no serial numbers are maintained.
    It seems to be a standard SAP functionality, but a little bit tricky. Can anybody help me?
    1. How can I remove the serial number assignment for a batch split position?
    2. Is there any customizing setting with which I could perhaps deactivate the check?
    Thanks a lot in advance. Any input is appreciatted!

    Hi,
    issue has been solved at last. The batch split indicator can be used to display the batch structure of an item. And here the serial number can be removed as well.

  • Number assignment for Batches

    Dear Experts,
    How to see the batch number assignment at plant level or material level ?
    Thanks

    Hi,
    You can see that in transaction code  OMCT.
    regards
    sandip

  • Batch management number ranges

    Hi guru's
        My client is using internal number ranges for my raw material
    but now they want to enter external number at the time of Goods reciept
    and also I want to make it mandatory for external number ranges.
    that mean system is proposing me internal number ranges now
    and user is updating external number ranges.
    My issue is system should not propose me any internal number ranges
    I want to update my external number ranges only
    could any body help me to solve this issue?
    which user exit i have to try or is there any other  option?
    Nilesh

    Dear,
    Set Up Customer Exits for External Batch Number AssignmentAs part of the external batch number assignment, the following two function module exits are available in the SAP enhancement SAPLV1ZE for checking a new batch number that has been entered.
    EXIT_SAPLV01Z_003. Using this exit, you can replace the proposed number range object BATCH_CLT and/or external interval 02 with a number range object and/or external interval you have defined yourself.
    You also have the option of suppressing the batch number check, for example, based on the material or plant.
    EXIT_SAPLV01Z_004. Using this exit, you can define your own checking rule.
    In this you write a code, if the plnat is so and so , then take this external number range, if youn want internal number range then use the following
    You can use SAP enhancement SAPLV01Z for internal batch number assignment. This enhancement contains two function module exits that you can use to define number ranges or templates for batch numbers:
    Goto OMCZ, Inactive internal no assignment for the batches.
    Now in OMAD- Maintain no ranges for object- BATCH_CLT
    Maintain external no range for that.
    Please rfer this also,
    http://help.sap.com/saphelp_40b/helpdata/ru/dc/1d4b6e5733d1118b3f0060b03ca329/content.htm
    Regards,
    R.Brahmankar

  • Bin Location In Pick List - Cannot select batch/serial number after pick list created

    Hi,
    When i set up the item master as "Issued Primarily By Bin Location". There are no way for me to assign batch/serial in back end. In contrary, when item set up as "Issue Primarly By Batch/Serial Number", SAP prompt to pre-select the batch/serial no. during creating pick list.

    Hi,
    Please check this thread for the reason why system information is not correct.
    Variables - Sap business one
    Thanks & Regards,
    Nagarajan

  • Is there any standard SAP table which stores the license number assigned to a delivery item

    Hi Experts,
    This is in relation to license number assigned to a delivery item under ‘Export License Log’. Our scenario is for delivery of type NLCC created for an inter-company stock transport order. (i.e.not a sales order case where the license may get copied from sales order to delivery through copy control)
    As we understand, for legal control – relevant scenarios, export license for each item shall be determined afresh every time the delivery is accessed. (Depending on legal regulation, grouping, destination country, export control class, delivery partners vis-à-vis license master customer assignments etc.)
    To print the license text on one of the delivery output types, we want to access the license number for each item. (determined under export license log)
    Our question is:  is there any standard SAP table which stores the license number assigned to a delivery item?
    We have checked some of the license tables (T606*, VAEX, EMXX etc.) but couldn’t get any specific table storing delivery-item-specific license data.
    Helpful answers Text Removed
    Regards,
    Jagan
    Message was edited by: G Lakshmipathi
    Dont add such text in your post

    Hi Lakshmipathi,
    The export control log can be accessed by going to delivery Extras-> Export license log
    We need a table that stores the determined license for each item in a delivery document ( as shown in the below screenshot)
    Regards,
    Jagan

  • PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

    Hello,
    Iam facing this issue at the time of hiring (IT0000). The internal number range (01) is maintained in transaction code PA04 from
    00000001 to 90000000     and ext check box is NOT checked.  In NUMKR , the return value of the feature is also 01 .
    Now the weird thing is i get this so called error " No Valid Interval Found (Internal Number Assignment)" but if i ignore the error and hit enter / save , it lets me save IT0000 and moves on to the next infotype in infogroup.
    has anyone faced this before? what could be the possible solution here? Any help would be greatly appreciated
    thank you in advance
    Reema

    Hey Reema,
    http://www.sapfans.com/forums/viewtopic.php?f=11&t=327031
    NUMKR-Feature
    I think these are similar threads and have the same problem as you. Hope Partha Murli picks this up or you might just mail him.
    cheers
    Ajay

  • EDI Error : "Number assignment for ML document is incorrect"

    Hi All,
    We are getting the below error in EDI invoice generation.
    "Number assignment for ML document is incorrect".
    We have checked the number range for Material Ledgers. And the status is fine.
    We are using EDI for Inbound invoice creation.
    Can any body please guide us to solve this issue?
    Regards
    RS

    Hi Srikanth,
    The document types are assigned to the Parnter. But how will it be related to the Material Ledger.
    We are getting the error while number assignment for Material Ledger Document.
    Did we miss any settings are missing related to Material Ledger?
    Regards
    RS

  • Define Number Assignment for Goods Receipt/Issue Slips

    Hi Experts,
    please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
    Customizing for this functionality is composed by the following points:
    1. functionality activation at plant level
    2. number range group/interval code assignment
    3. Groups and intervals creation
    4. Plant / Storage Location / Movement type combination assignment to number range group.
    Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
    You receive a message from SAP that you have to insert the relevant object manually into transport request.
    Please can you tell me exactly what I have to put into transport request as object:
    - Program ID     (I think R3TR)
    - Object Type
    - Object name
    and any other relevant information with all the details.
    Thank you very much
    Kind Regards
    Andrea.

    Hi
    You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
    Reward points if usefu;
    Thanks & Rgards
    Kishore

  • How to create a Business Partner with internal number assignment

    Hello,
    We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
    Please put attention that we also don't want to enter any alternative external number because we don't want the end user to see after in the WebUI.
    Thanks in advance,
    Sergey Kozyrev

    Hello,
    Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
    p.s. If you don't see combobox mentioned above, it could be security issue.
    Kirill

  • Error in ME59N- Internal number assignment not defined

    Dear Gurus,
    I am getting error while creation automatic PO In ME59N. Below error shows
    Error Name                                                                                          Massage Class          Msg No.
    PO header data still faulty                                                                            MEPO                         2
    Internal number assignment not defined (please enter number)                 06                              243
    I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
    Aslo I maintain the source list & Info Record for two vendors.
    I assign the source of supply in PR .
    After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
    and selected the Per Requisition , per contract tab.
    After this above two error is showing in SAP.
    Kindly give us solution to resolve this.
    Regards.
    Abhijit
    Subject changed to reflect the issue-  by: Jürgen L

    Hi
    The error is probably caused because T161-NUMKI = <BLANK>.  Please fill in the valid T161-NUMKI.
    This needs to be done in customising
    Transaction SPRO:
    Material Management -> Purchasing -> Purchase Order -> Define Document types
    Number range in the case of internal number assignment
    Hope this information is of help.
    Kind regards,
    Lorraine

  • Error in depreciation run- number assignment

    HI ALL,
    After upgrading to ECC 6.0, I am not able to run the depreciation. I get the below mentioned error
    Create document number range 03 using internal number assignment
        Message no. AA776
    Diagnosis
        Processing terminated because the document number range 03 for year 2007
        was set up with external number assignment.
    System Response
        For periodic posting of depreciation, you have to create a document
        number range with internal number assignment, since the document numbers
        are assigned from Financial Accounting.
    Procedure
        Change the number assignment for the number range 03 from external to
        internal in Customizing for Asset Accounting. See SAP Note 890976 for
        more information.
    I am not able to change the number assignment from external to internal for no range 03 as the ext tick is greyed
    Request your help for the same.
    Note 890976 is already applied
    help required...pls
    Regards,
    Kiran

    Hi,
    First option:
    try to delete the 03 number range & create it once again.
    Second Option:
    go to OBA7   & Select documnet type AF & double click,
    change the number range 03  to 04,
    then maintain the number range in  FBN1 for  04.
    maintain this number range as internal ( dont tick teh external button.
    Regards
    Chandra

Maybe you are looking for