Batch issue problem.

In t- code MIGO i wish that while mentioning batch no. only pending batches no. and no. of material quantities ( which is shown in t-code MMBE ) should be displayed in batch help .I am on line waiting for reply .
Regards
Abhi

Hi,
i think is not possible  if it s so then there is no meaning for batch.
thanks,
Mohan

Similar Messages

  • Premiere Pro CS5.5 Batch Capture Problems

    Hi,
    I'm sorry for the repost, but the older questions I can find on this topic won't allow me to reply and they were never answered (last post several months ago).
    I'm having the batch capture problem with Premiere Pro CS5.5. Capture with device control works great when single capturing. When I log clips and attempt to batch capture, though, I get the "capture failed: device not found" error in my capture log. I have checked through the FAQ and the complete premiere manual on batch capturing. I've set my device (still using a Canon XL1) and even checked the video size...it matches that of my project (someone on another forum mentioned that this could be an issue). I have had no luck.
    Could anyone tell me if this issue has been resolved, or redirect me to a resolution?
    Thanks in advance for any help!!
    Steve

    I have encountered this problem if the current tape position is beyond the last recorded point when you start the batch capture or if any "OUT" points are beyond the last recorded position or if the capture spans any unrecorded portions of the tape. I always thought it was my camera but maybe it is a PPro issue.

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • Issue / problem adding audio in Presenter 7 (PowerPoint 2010)

    Since I got a new PC (Windows 7), I'm having an issue / problem adding audio in Presenter 7 (PowerPoint 2010).
    It doesn’t happen every time, but randomly with many presentations...
    In PowerPoint, right after I import audio (through Presenter) and click “ok”, I get the following errors:
    Then, I can't get into the "import/sync/edit" mode, from the Presenter tab...
    Already tried reinstalling Presenter, resaving new presentations, deleting the .ppcx/audio folders, importing the audio locally (vs from my network drive), etc.
    Then sometimes, randomly, it will let me get back in and edit the audio, after numerous attempts…?!? I can't figure out what the pattern is, which is causing this new problem (never had this problem before, w/ my old PC - Win XP / PowerPoint 2003 / Presenter 6 & 7)
    Anybody have an idea what the issue could be?
    Thanks,
    Mike P.

    Hello,
    I  tried to reproduce this issue but I am not getting any error message. Please provide us following information; this might help to reproduce this issue:-
    1) You are seeing this issue in  PPT or PPTX
    2) You seeing this issue in newly created presentations or its just old presentation which is not working properly.
    3) OS and PowerPoint version
    4) If this issue is consistent on any particular presentation then please share it.
    5) Can we have exact reproducible steps
    Regards,
    Shubhi

  • HT6114 How is it working on iMac 10.7.5? Any issues, problems?

    How is it working on iMac 10.7.5? Any issues, problems?

    Balderdash wrote:
    How is it working on iMac 10.7.5? Any issues, problems?
    These are the 10.9 (Mavericks) Forums. You are looking for the old Lion 10.7 Forums.
    Try  here
    Good Luck
    Pete

  • Typical Batch payment problems

    Typical Batch payment problems
    Can anyone describe the various problems they have faced when running typical batch payment and how they resolved them?

    Dear expert,
    Currently we are not using tcode F110 for payment transaction. Is there any documentation on how to use transaction F110?.
    Thanks.

  • DTW batch import problem

    Hi all,
    I've got a problem when trying to batch import from sql statement via odbc:
    "Can not connect to ODBC data source" and then "Can not get SQL handler"
    Manual import is working well with this odbc connection !
    The statement looks like: SELECT ItemCode AS 'Record Key', ItemCode, 'Y' AS 'Properties1' FROM OITM WHERE ItemCode = '4711'
    While manually importing I saved the xml and after that call: dtw.exe -s config.xml
    I used a SQL (Server 2005) Native Client DSN and only set db auth (sa...) and left other properties as default
    Anybody knows this behavior? Is the statement wrong? Or the odbc connection?
    (DTW Version 2005.0.0.29)
    Thanks in advance
    Marco
    Edited by: Marco Willems on Jun 29, 2010 6:34 PM

    Hi Marco,
    I checked this issue using the 2007A DTW (version 2005.0.30) and the 8.8 DTW (version 88.0.11). I haven't had success.
    The 8.8 version runs without error but did'nt update my test item. If you run it manually, the DTW reports one updated value. If I run it by a command (DTW -S <File>) it runs fine and reports zero successful update.
    I don't know if the DTW is able to run sceduled ODBC updates or not and would hope for an answer to this thread!
    All the best
    Torsten

  • Batch return problem

    Suppose for production order no. 123 of qty 1000 EA i had issued material for 800 EA but when production had started i had used only 500 EA & now i wish to transfer 300 EA again in unrestected stock .From where i will come to know about records against that production order . How to do this setting ?

    thnx for your promptly reply, but my problem is not solved. I shall explain you the exact situation.
    Thru MIGO i am issuing material (Raw Mat , Packing Mat, etc...) to prdn order. Now after prdn I might get remaining matrial from prdn dept.
    Now I want that material should go in my unresticted stcok. So for that, which transaction should be used ???
    Secong Issue - While issuing material to prdn order, in the detail screen tab, I hv to enter batch number, in help screen (F4) i get all the batches which are already consumed. Here i want only pending batched which are having stock.
    I am expecting the early reply from your side.

  • Appworx Batch Issue - SQL ERROR CODE:-12705

    Hi Experts.
    I am facing an issue in TEST Appworx. Batches are not executing, throwing error
    “ Threads submitted - starting thread tracking (Logon) SQL ERROR CODE:-12705” for all batches.
    It is happening for all batches.
    Work around:
    1-     I thought that may be appworx is not able to make connection with DB so I created one customized batch which connect db and update table, , it completed successfully,
    2-     At DB level for Error “12705” it cause due to lang parameter; I check and found it is also currect, no issue with lang
    Please advice.
    Thanks

    Wrong forum - while many Oracle Retail users also use Appworx, this is a problem between Appworx and communication with the Oracle Database.
    Your best option is to use the UC4 support site, where they have a forum community : https://uc4.service-now.com/ (requires current support and login)

  • Db batch update problem

    I have a real problem with doing a batch update in SOA Suite and have tried a number of different approaches but they have all failed at some point. My requirement is really quite simple.
    I have a simple table - MY_TABLE:
    Columns:
    PK_ID - primary key
    ATTR_1 - not a primary key but selection criteria for on which to update.
    ATTR_2 - value to update
    In oracle the above update statement would look something like:
    update MY_TABLE set ATTR_2=<some value> where ATTR_1=<some value>
    However I don't want to update a single row, I want to update a number of rows at the same time based on a number of different ATTR_1 values. So my approaches so far have been:
    a) use the Update functionality of the DB Adapter. The problem with this is that the DB adapater insists on updating by primary key. I do not have the primary key, I have another column for which I want to use as the criteria. So this won't work.
    b) Create a two stage process whereby I retrieve the primary keys based on ATTR_1 and feed this into approach a). Problem is that now I need to do a select based on a list of ATTR_1 values. The Select feature of the DB adapter does not allow selection based on a number of attributes, just one. i.e. the SQL that it creates for you is something like SELECT VALUES FROM TABLE WHERE CRITERIA = <some value>. What you would really need is SELECT VALUES FROM TABLE WHERE CRITERIA IN <some value>, but the Select feature won't allow this.
    c) This brings me on to the next approach. So I am going to try and use the DB adapter in Pure SQL mode. The SQL I define is something like:
    update MY_TABLE set ATTR_2=#myValue2 where ATTR_1 in #myValue1
    To get this work I have had to do some XSLT to convert my repeating element of ATTR_1 into a concatonated string e.g. ('myValue1','myValue1','myValue1'). The XSLT to do this sort of broke the XSLT GUI in SOA Suite, but it seems to work at runtime and creates the correct XML request to the DB adapter, however no rows are being updated and there is no error message either.
    This simple DB update is seemingly beyond my grasp. Can anyone help?
    Also I have no intention of looping through BPEL doing a single update at a time. The performance hit for a large number of records would be prohibitive.
    Edited by: user10103872 on 28-Nov-2010 10:42
    Edited by: user10103872 on 28-Nov-2010 10:43

    >
    I am thinking to write a procedure call to loop the sql statement "update table_A set version_no='1';"
    >
    Please don't do that. That will result in other complex issues and is not the solution to this problem.
    When you try to do any insert, update or delete, Oracle generates UNDO (which basically has all the data to revert back the changes, in case you decide to do a rollback).
    In your case, the UNDO Table space is not sized appropriately for this large update that you are trying to run. So, you need to fix that, by sizing it appropriately or by Using Auto-Extensible Table spaces.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/undo.htm#BABJCFFE

  • Sender WF-BATCH issue

    Hi All,
    I have gone through many forums but didn't find the exact solution to my problem. Actually we have configured E recruitment EHP4 but my all approvers in their SAP UWL receiving workitems from administrator instead of initiator of workflow and the same configuration is working fine in Development server and workitems come with the name of initiator .
    We have configured SWU3 also in dev server and production server but in production server it is creating this issue , pls let me know if there is some setting for changing our WF-BATCH user so that approvers receive mails from Initiator rather than administrator.
    Thanks and regards,
    Soni.

    Hi Soni,
    It can never happen that your are getting mails in DEV from initiator's ID and in PRD from WF-BATCH ID with the same settings done in both.
    To resolve your issue -
    1) If you are using SEND MAIL step type in workflow, then mails will go from WF-BATCH id only.
    2) If you are using Function Module to send the mail, then set  the sender's email id to the one as that of Initiator' id.
    3) If you are using standard report RSWUWFML2 or something, then mails will go from that ID always by using which you schedule the background job.
    Please check your settings in both the systems thoroughly in DEV as well as in PRD.
    Regards,
    Guddan

  • Batch issue were all are blanks

    Hello
    We are having some kind of regression issue with batches here, as this was not impacting us from the R3 (execution) side we didnt notice this impact until now the impact is really from the APO side eventhough the source of this issue is from the R3 side. The issue is, the Production date and the SLED is not getting populated for the generic Batches created when the GR is done at the 3PL(Via and inbound Idocs in to SAP)Currently there is no issues with the batches at plants , the issue is only with the generic batches created by the GR at the 3PLs.When I compared for 5778 Prod date and SLED date were populated untill prod date 7/3(before upgrade) and then the dates were not populated in the batches.This is happening for all the DCs and from what I noticed to all materials.
    What causes this,any way to fixed it.
    Thanks
    JJ

    The SLED dates are only calculated automatcially if a shelf life value is maintained for the plant the material is in.  If it is maintained, the system then requires a production date to be enterred at GR. 
    It could be that someone did not maintain the shelf life value for the materials in your DC's or plants during the upgrade.  If there is no real shelf life, you can enter a large value like 9999 for the field.
    Now since it sounds like your creating all these through an IDOC, then it could be in the IDOC process.  That there is missing mapping, or incorrect mapping or the data simply is not provided.  I would have no idea with regard to that as I have no clue what is being done in your system for creating the IDOC's and processing them.
    The other very remote possibilty is that when you upgraded, someone didn't set the batch level correctly in config for the new system and your being batched managed at a plant level and not at the material, (or possibly client level).  Hopefully that's not that problem cause then you really have your work cut out for you!!!
    Crag

  • Batch Issue

    Hello
    We are having some kind of regression issue with batches here, as this was not impacting us from the R3 (execution) side we didnt notice this impact until now the impact is really from the APO side eventhough the source of this issue is from the R3 side. The issue is, the Production date and the SLED is not getting populated for the generic Batches created when the GR is done at the 3PL(Via and inbound Idocs in to SAP)Currently there is no issues with the batches at plants , the issue is only with the generic batches created by the GR at the 3PLs.When I compared for 5778 Prod date and SLED date were populated untill prod date 7/3(before upgrade) and then the dates were not populated in the batches.This is happening for all the DCs and from what I noticed to all materials.
    What causes this,any way to fixed it.
    Thanks
    JJ

    Dear sakthi,
    When u post GRN wrt P.O, System picks the batch number which you have given in P.O.......automatically....just try once again...
    If still u have problem, check the external number range for the Batch Number assignment..
    regards,

  • Batch Number problem

    Hi,
    When i check the Batch Transaction report, I find Batch Number and qty and Whse. But when i try to issue, Iam getting quantity fall into negative inventory. The stock is not showing in the whse althought in the Batch report, it is showing as qty available.
    We have not allocated negative inventory.
    The item is managed set to "Relese"  and on every transaction. Same in General settings.
    This is happening for 2 items. and for 8 batches.
    What could be the problem?
    Iam using SAP 8.81 PL 06
    Rgds
    Kalli

    Hi,
    Please check Note No. : [1250867|https://b1-support.wdf.sap.corp/sap/support/notes/1250867] and run the detect query attached with the Note.
    If the reported item appears in the result, then you need to contact the Support Centre by creating a support ticket on SMP to get your issue investigated.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Batch help problem

    While issuing material thru MIGO to prdn order, in the detail screen tab, I hv to enter batch number, in help screen (F4) i get all the batches which are already consumed. Here i want only pending batched which are having stock.
    I am expecting the early reply from your side.

    Hi  Abhi,
    I understand your problem for batch determanation,
    You just go in to Change material master (MM02),
    Select Work scheduling view or Plant storage data view.
    There you put tick mark on *Batch Management*
    Then save the material Master.
    Now create one reservation and issue material according to what I told you earlier procedure.
    You will get success.
    For your present problem,
    Go to MMBE, there find the storage location for the material, same location you enter at MIGO screen, and Click on CHECK, It will gives you Yellow or Green traffick ligt Now you post your transaction.
    Your present problem also will be solved.
    By
    anand (Hyderabad)

Maybe you are looking for