Batch Processing fails since upgrading tree

I've got a customer who has a custom legacy dos executable that runs a
batch file, maps a drive, and sends an attachment to one of their remote
4.11 servers. Until recently, this has worked wonderful for them.
However, in the past week, we have added a 6.5 server to the tree and
before doing so, we had to upgrade all the servers to run DS 6.21.
Since doing this, some (not all) of the runs have stopped working. For
some reason, some of the servers we try to connect to, we're getting an
error now when we attempt to run our batch commands. The error is 89FC
(Can not get connection status) and our map fails, and then our batch
fails. Actually, what happens is is the user we're trying to map with
has no password, but when we run our batch file, it now asks us for a
password for about 5 of the servers we do this with. The other servers
work fine, just these 5 servers no longer work.
We use a very old version of map.exe because our application is memory
bound and this map.exe is 48K.
Any ideas would be appreciated.

I am having some of the same problems except the server that is requiring a password (and did not used to) is the master replica. Any ideas? We use this server to store document images and we have a user that we used to connect to through DOS batch files (up until we upgraded the server to NW 6.5/OES sp7). It now requires a password no matter what we do. Even if we have a password on the user login, it gets the following error :
Can not get connection status (89fc)
I cannot find a way around this. Any ideas would be great.

Similar Messages

Can't batch process metadata since updating to 3.5

I used to be able to highlight several images in the Library Grid mode, type in a Metadata Label, and that label would be applied to all of the images. Doesn't work any longer. What am I missing? Doesn't work for Keywords either.

Okay, that worked. Now, I have never seen nor used that "Show Metadata
for Target Photo Only" option. How in the world did it get checked?
Cheetah3
Quoting marcb_ <[email protected]>:
marcb_ http://forums.adobe.com/people/_marc_b_ created the discussion
"Re: Can't batch process metadata since updating to 3.5"
To view the discussion, visit:
http://forums.adobe.com/message/4061659#4061659

Promise duplication process fails after upgrading BIOS (KT6 Delta bios 5.7)

After upgrading the bios for my KT6 Delta from 5.0 to 5.7 the controller fails to duplicate the discs in my mirror set.
After copying 1% if will fail and report that there is something wrong with the target disc. I have used the diagnostic tool provided by Maxtor, but there does not seem to be anything wrong.
Questions:
1) is the duplication process autonomous, i.e. wil incorrect bios settings affect the duplication process
2) Since BIOS 5.0 an update of the Promise BIOS is included. Because of CRC I can assume that any BIOS downloaded from MSI will be correctly flashed. Even after CMOS clear the problem still occurs. Does anyone experience the same problem?
3) How will I create a mirror set and duplicate a working disc to the other bypassing the mirror option in de Promise BIOS?
Thanks in advance for any help..

I have been using Promise RAID controllers since the FastTrak66. I used to select mainboards based on this controller because I am used to it.
So the solution to the problem will not be based on mistakes in using it ;-)
Either the drive is defective (which special software did not proofed to be), or the BIOS is somehow incorrect, or there might be some settings outside the controller affecting it.

Batch processing fails after 454 (or so) files are processed

I'm using batch actions to export a collection of Freehand (fh11) files to various other formats (emf, swf, etc.). It's a simple process - load the freehand file, export it to the desired format, close the image. Everything works swimmingly for the first 454 files (give or take a few), after which I get the message that "the file 'whatever.fh11' is in an unknown format and cannot be opened". The batch stops and I can't even manually open this or any other valid fh11 file. The indicated fh11 file is indeed valid - once I shut down Illustrator I have no problem loading it.
I've thus far converted 20,000 or so fh11 files using batch actions and have had to restart Illustrator every 454 files during this process. Anyone have any ideas?

Without knowing more about the files, I would recommend to just reduce the number of files you're processing in a single Batch process.
Sometimes, especially if there are too many files, Illustrator's Batch process gets confused and strange things may happen then.

Fireworks CS4: Batch-processing fails

Dear Helpers, I need your advice for solving a problem concerning the batch-processing with Fireworks CS4 on WinXP. A few days before there was no problem witch "batching". But now, after choosing the image files, the batch process stops by closing the "batch"-window. Can anybody help? Thanks for your answers. Oli

Hey... solved it! Changed the background color in almost 2,000 jpegs. Heres how:
Photoshop CS4, first define a color in an AXT file:
Open test image, image, adjustments, replace color. use eye dropper to sample the background color, bring hue, saturation, and lightness bars all the way to the right (background color now turnd white), click save (save the definition AXT file, you will need to reference it later).
Now create a new action called "replace color", have test image open (with original background that you want to change), start record and do this to record the action:
Image, adjustments, replace color. Click load and select the AXT file, click load (the background color now turns white with the loaded AXT definition). Click ok. save file. Stop record action.
Now run a batch command and use that action you just recorded: File, automate, batch, select your new action in the play section, select the folder of files to process and the destination... click ok to run the batch.
I changed the "background" color in 2,000 estore product images of various sizes (thumbnail, medium, and large sizes) in about 15 minutes. Wow! I knew there had to be a way.
Hope it helps lots of people, 'cause it sure is a common need.
Cheers,
Carl

Domain Controller Authentication Fail Since Upgrade

When I boot my Mac Pro at the office, the network's domain controller prompts me for my domain login. Since upgrading to Yosemite, the domain controller rejects my credentials. However, I can go to "Connect To Server" and browser the entire network despite the domain controller not authenticating me as a user.
To summarize, since switching to Yosemite:
1. Can't login to the network when I submit my credentials
2. Can browse the network without my credentials
My theory is that the only reason #2 works is because #1 is working but Yosemite is just mistakenly telling me I wasn't authenticated.
So what's the problem you may ask if I can browse the network anyway? The problem is that I can't mount any of the network drives to my desktop because Yosemite doesn't think I'm authenticated to do such. If I can solve this authentication problem, then I should get my mounted network drives back.
Thanks in advance.

Hi,
TEST: Basic (Basc)
Warning: Adapter 00:0D:3A:00:0D:01 has dynamic IP address
(can be a misconfiguration)
Do you have any NIC conifgured to get dynamic IP on your DC which is having issue? If yes, please disable that NIC. Also, please provide me the result of the below
1) On your DC which is having issue, run "ipconfig /all"
2) Repadmin /showrepl
Thanks,
Umesh.S.K
Thanks, there is only 1 nic card. It is getting a dhcp address because this is an AZURE Hyper-v machine and I have set an IP reservation for it. I have no way to hardcode the IP because it gets shut off/on all the time
C:\Users\Administrator>repadmin /showrepl
Repadmin: running command /showrepl against full DC localhost
Default-First-Site-Name\GP2010-A
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: 007c755c-f56c-4e51-a211-fd4431f63927
DSA invocationID: 007c755c-f56c-4e51-a211-fd4431f63927

PXI-4110 Cards failing since upgrading to Calibration Executive 3.4

Since we upgraded to Calibration Executive 3.4 all of our PXI-4110 Cards have been failing the following:
Calibration
As Found
Channel
As Found DMM Reading
As Left DMM Reading
Test Value
Low Limit
Reading
High Limit
PassFail
2
0.999942
A
0.999942
A
0.25000
A
0.99557
A
0.94065
A
1.00432
A
Failed
2
0.999991
A
0.999991
A
0.50000
A
0.99524
A
0.93736
A
1.00474
A
Failed
2
0.999761
A
0.999761
A
0.75000
A
0.99370
A
0.94076
A
1.00582
A
Failed
This failure occurred on 3 brand new cards and I have even tried the last PXI-4110 before upgrading and it also failed these test and when an adjustment is attempted I receive the following error:
Error -300010 occurred at Get UserField Data.vi
Complete call chain:
     cex_UtilityGetUserFieldData.vi
     cex_UtilityGetUserFieldDataByIndex.vi
     _NI 4110_Get Channel Range and Level.vi
     Adjust_NI 4110_Current Out Accuracy.vi
at step Adjust Current Output Accuracy
I am using a Agilent 34401 for the DMM.

JVP
Here are the files you wanted. Sorry this took so long. The hard drive on the computer that we have the Calibration Executive software on died and we had to reinstall everything. So and I tried to run another card with the same results the calibration report I am sending you is from today. I sent the reoprt in two formats XLS and PDF.
Attachments:
ni_support.zip ‏197 KB
71517 Wednesday, January 11, 2012 8-28-29.xls ‏49 KB
71517 Wednesday, January 11, 2012 8-28-29.pdf ‏30 KB

IBook Battery Failing Since Upgrade to 10.4.10

I use my iBook heavily for class. I regularly allow the battery to discharge fully before recharging - usually every week or so. Since the last update to 10.4.10 I've noticed the battery seems to be discharging rapidly. Nothing else has changed. I have Applecare and was talked thru resetting the battery (remove battery, hold down power button). I was advised if this didn't fix the problem to go to the Genius Bar. If anything it seems to be worse over the course of a week. I went to the Genius Bar and was told I had to buy a new battery. Now according to the Apple web site the battery should still be at 80% at 300 cycles. Currently I have less than an hour at 290.
Suggestions?

You could try resetting the PMU if you haven't already. Otherwise if you aren't covered by the iBook G4 Battery Extension program, your best bet may be to talk to Applecare again and do your best to convince them that your battery is failing prematurely. It is getting a lot of cycles, so this might be a hard case to make. But you never know--sometimes a different person will give you a different answer.
Good luck!

Facetime fails since upgrading to lion

I've tried everything in the book...calls to Lion or out of Lion to our iphones int the family all fail once picked up...rings fine but will not connect.
This is not the registration or login concerns...
Any suggestions?

Check the thread below, there are other with slightly different symptoms that you might want to search for too. Good luck!
John
can not connect to internet after installing lion

Can I desynchronize one station with batch process model?

Hi,
My project has 5 stations run test in parallel. I decide to use batch process model since I want them to start and stop together. Beside start and stop, I have some certain part in the test sequence need to sync together. But in 5 stations, I want one station work without sync at these steps. I tried using batch synchronize with precondition but it looks like other stations still wait for the one I skip the sync. My another option is using rendervous with number of parallel thread is total - 1. I test and this works. But I still want to know if I can use batch synchronize step or not because this offer the start sync and exit sync feature.
Thank you!
Solved!
Go to Solution.

NTT wrote:
Doug,
Thanks for your answer.
I want to have something happens parallel with other threads but without affect by batch sync steps. I have multiple stations working parallel in assembly line. They are sync because of pick and place. But I want to have one process works as station manager who keep track of UUT between station and other environment condition like pressure, temperature.
Thang
Generally, the intent of the TestSockets in the process models is that they will have a 1 to 1 correspondence to UUTs, does your 5th socket correspond to a UUT? In otherwords are there 5 UUTs under test at one time? UUTs often need things like report generation or database logging. Does your 5th socket require report generation? If not perhaps this 5th socket is really more of a utility thread and thus creating a new thread or execution at runtime makes sense for it. If your 5th socket instead does really correspond to a UUT that is being tested in parallel enitrely separately from the other UUTs then perhaps you should start up a new execution for that socket using the sequential model and just have that running at the same time as your other sockets are running with the batch model.
So it really depends on what you are using that 5th station/thread for as to what approach would likely work best.
Hope this helps,
-Doug

Batch process recovery in ODI

I am very new to ODI.
I just want to know is there any solution available in ODI so that if any batch process fails then I can recover the data??
or is it so that in ODI when a batch process fails no data is get affected??

If the connection falls, then it depends on the JDBC driver used by ODI to connect the DBMS.
- If the driver reports that the connection is down, this will put the session in error.
- Most drivers just wait for a reply from the server, assuming that some "very long" processing is currently in progress on the database. ODI will also remain there, waiting for a database response. You would have to stop the session separately.
And yes, you can restart sessions in error.
Regards,
-FX

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. the process ends with my mac saying the software is not currently available from the software update server.

Since upgrading to Mavericks, my Canon MP980 printer no longer works. I've tried deleting the printer and adding it again. I've downloaded the driver software from Canon. My Mac dropbox tells me "the selected printer software is available from Apple", but when I click to download it, the process ends with my mac saying the software is not currently available from the software update server.

Open Finder and click on Go > Go to Folder. Then type
/Library/Printers/Canon
and press Enter. This will show the BJPrinter and iJScanner folders. You could try moving or trashing this folder and then installing the driver that you downloaded from Canon again.

Upgrading Stellent 7.5 to OCS 10gR3 Import Process failing HELP NEEDED

Hi,
I am upgrading Stellent 7.5 to Oracle COntent Server 10gR3. Here is what I have done.
1. Migrated all the configuration from Stellent to 10gR3
2. Migrated the Folders from Stellent to 10gR3
3. Migrated the content by creating an Archive and then importing the Archive in 10gR3.
I am seeing lot of errors in the log file. Following are the errors I see in the log file.
1.
Could not send mail message from (null) with subject line: Content Release Notification. Could not get I/O for connection to: hpmail.rtp.ppdi.com java.net.ConnectException: Connection timed out
2.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_000025'. Virtual folder does not exist.
3.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004118' was not successfully checked in. The primary file does not exist.
4.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_004213' was not successfully checked in. IOException (System Error: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227 (No such file or directory)) java.io.FileNotFoundException: /u01/app/oracle/prod/ucm/server/archives/productioncontent/09-dec-21_23.29.44_396/4/vault/dmc_unblinded_documents/4227
5.
Import error for archive 'ProductionContent' in collection 'prod_idc': Content item 'ID_031414' with revision label '2' was not successfully checked in. The release date (11/4/08 9:12 AM) of the new revision is not later than the release date (11/4/08 9:12 AM) of the latest revision in the system.
6.
Import error for archive 'ProductionContent' in collection 'prod_idc': Invalid Metadata for 'ID_033551'. Item with name '07-0040_IC_Olive-View_UCLA_ERI_Cellulitis_2008-08-26.pdf' already exists in folder '/Contribution Folders/2007/07-0040/07-0040Site_Specific_Documents/07-0040Olive_View_UCLA_Medical_Center/07-0040Archive/07-0040Essential_Documents_ARC/07-0040Informed_Consent_ARC/'.
7.
Import error for archive 'ProductionContent' in collection 'prod_idc': Aborting. Too many errors.
QUESTIONS:
Is there a way to keep the import processing running even if the errors are coming. As it looks like when there are too many errors the import process stops in the middle.
How do I find out the total number of folders and the documents. As I want to run the same query on Stellent 7.5 and find out total number of folders and the documents and then run the same query on 10gR3 and compare the results. Just want to fnd out how much content is imported.
How do I run the import process over again as half of the content is imported and my import process failed in the middle when running the process over again what settings do I need to provide to make sure no duplicates get created etc.
Any help is really appreciated.
Thanks

Hi
There are a couple of ways to get around the issues that you are facing such that import process is not interrupted because of these. They are as follows :
1. Use ArchiveReplicationException component . This will keep the import process running and make a log of the failed process which can be used for assessing / gauging the success of the import and what all needs to be redone.
I would suggest this as the option for your case.
2. Put the config variable for arciver exception to 9999 so that the archive process stops only after hitting the limit of 9999 errors.
I would suggest to go for step 1 as that would be a much more foolproof and methodical way of knowing what all items have failed during import.
Thanks
Srinath

How can I reprint a large # of files in adobe acrobat XI since there's no batch processing feature?

How can I reprint a large # of files in adobe acrobat XI since there's no batch processing feature?

One of the available commands in the Action Wizard is Print (under the More
Tools sub-section). You create a new Action, add that command and then run
it on your files to print them all.

Process Not Responding since upgrade to 10.5

Hi
Since upgrading to 10.5 I keep getting an unresponsive process listed in Activity Monitor.
When I force quit it, it comes back after a minute or so.
I'd like to know what it is, and how to get rid of it.
Process info is:
UserEventAgent (Process ID 101)
Parent Process is launchd (80)
open files and ports associated are:
/usr/sbin/UserEventAgent
/System/Library/UserEventPlugins/AirPortUserAgent.plugin/Contents/MacOS/AirPortU serAgent
/System/Library/UserEventPlugins/alfUIplugin.plugin/Contents/MacOS/alfUIplugin
/System/Library/UserEventPlugins/AppleHIDMouseAgent.plugin/Contents/MacOS/AppleH IDMouseAgent
/System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
/System/Library/UserEventPlugins/BluetoothUserAgent-Plugin.plugin/Contents/MacOS /BluetoothUserAgent-Plugin
/System/Library/Extensions/AudioIPCDriver.kext/Contents/Resources/AudioIPCPlugIn .bundle/Contents/MacOS/AudioIPCPlugIn
/System/Library/Extensions/IOAudioFamily.kext/Contents/PlugIns/AOAHALPlugin.bund le/Contents/MacOS/AOAHALPlugin
/Library/Audio/Plug-Ins/HAL/Digidesign CoreAudio.plugin/Contents/MacOS/Digidesign CoreAudio
/System/Library/UserEventPlugins/BTMMPortInUseAgent.plugin/Contents/MacOS/BTMMPo rtInUseAgent
/System/Library/UserEventPlugins/iCalAlarmAgent.plugin/Contents/MacOS/iCalAlarmA gent
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio
/System/Library/UserEventPlugins/ParentalControlsUEAPlugin.plugin/Contents/MacOS /ParentalControlsUEAPlugin
/Library/QuickTime/LiveType.component/Contents/MacOS/LiveType
/Library/QuickTime/DVCPROHDMuxer.component/Contents/MacOS/DVCPROHDMuxer
/Library/Caches/com.apple.LaunchServices-023501.csstore
/System/Library/PrivateFrameworks/LiveType.framework/Versions/A/LiveType
/usr/lib/dyld
/private/var/db/dyld/dyldshared_cacheppc
/dev/null
/System/Library/UserEventPlugins"
Any ideas?
Cheers

Update.
After pasting the 'open files' list into the post, I re-examined it and spotted a Digidesign entry that I'd missed in my general weeding out of all Digidesign stuff. I deleted the plugins in the HAL plugin folder, and rebooted. All now seems well.
thanks for looking
G

Batch Processing fails since upgrading tree

Similar Messages

Maybe you are looking for